Dec 142017
Microsoft supplemental driver library for Windows 3.0. Disk 2 of 4.
File SDLDISK2.ZIP from The Programmer’s Corner in
Category Windows 3.X Files
Microsoft supplemental driver library for Windows 3.0. Disk 2 of 4.
File Name File Size Zip Size Zip Type
ACCESS.EXE 31072 14425 deflated
ACCESS.WRI 53248 15353 deflated
AP-KBD.DRV 11105 7321 deflated
AP-KBDHP.DRV 12033 7903 deflated
AP-KBDOL.DRV 11201 7389 deflated
AP-MOU.DRV 5024 2467 deflated
CAN_ADF.EXE 68288 29601 deflated
CH5500.DRV 7360 3641 deflated
CPQIVGS.DRV 74288 33959 deflated
DCNX150.DRV 9296 2778 deflated
DCNX150P.DRV 14752 3163 deflated
DM309.DRV 6000 2364 deflated
FLEX.DRV 25184 8253 deflated
GENDRV.EXE 71808 30542 deflated
IBM5204.DRV 8752 2577 deflated
JDL850.DRV 5008 2276 deflated
LBPIII.DRV 82784 19382 deflated
NETSDL.TXT 7157 2249 deflated
NETWARE.DRV 47008 19547 deflated
NETWARE.HLP 26607 10816 deflated
NWPOPUP.EXE 3862 1831 deflated
OEMSETUP.INF 17200 4149 deflated
OL820.DRV 58272 14446 deflated
README.TXT 12432 3459 deflated
SF820.EXE 66400 28628 deflated
SFFLEX.EXE 66400 28615 deflated
V7480256.DRV 74064 30779 deflated
V760016.DRV 71104 31808 deflated
V776816.DRV 77184 33397 deflated
VIPX.386 14281 3865 deflated
VNETWARE.386 10067 2253 deflated

Download File SDLDISK2.ZIP Here

Contents of the README.TXT file


The disks included in this package contain device drivers
for printers, displays, networks, mouse devices and
keyboards. These drivers allow the devices to run with

This file includes instructions on installing these device
drivers and a list of all devices supported by the drivers
included in this package.

Installing the Novell NetWare driver
If you are already using the Novell NetWare driver included
in the Windows 3.0 package, copy the following files from
the Supplemental Driver Library Disk 2 to your Windows
directory: NETWARE.HLP and NWPOPUP.EXE. Then copy the
following files into the SYSTEM subdirectory in your Windows
directory: NETWARE.DRV, VNETWARE.386, and VIPX.386.

If you have never installed the NetWare driver, follow the
instructions in the section "Running Setup from MS-DOS" in
Appendix A of the Windows User's Guide.

For information on installing any of the drivers in this
package on a network drive, see the NETSDL.TXT file.

Installing a display driver
Follow the instructions in the section "Running Setup from
MS-DOS" in Appendix A of the Windows User's Guide. Setup
might prompt you to insert disks from this package or from
the original Windows 3.0 package.

Installing a printer driver

1. In the list of printers in this file, find the printer
you want to install. Note which disk contains the
driver that corresponds to the printer. (If the driver
filename has the .WPD extension, follow the instructions
in the next section.)

2. Insert the appropriate disk in a floppy disk drive.

3. Choose Control Panel from the Main Group window in
Program Manager.

4. Choose the Printers icon from the Control Panel window.

5. Choose the Add Printer button.

The dialog box expands to display a list of printers
available in the Windows 3.0 package. If you have never
installed a printer, this list box will fold out
automatically for you.

6. Scroll to the bottom of the list of printers and choose
Unlisted Printer.

7. Choose Install.

The Add unlisted printer dialog will appear.

8. Select from the Directories list box the drive that
contains the appropriate Supplemental Driver Library

9. Choose the driver name for the printer you want to

10. Choose OK. (Control Panel might prompt you to insert a
disk from this package or from the original Windows 3.0

Your printer driver will be listed in the Installed
Printers list box.

11. Choose OK to close the Printers dialog box.

12. Follow the instructions in the Windows User's Guide to
configure your printer driver.

Installing a WPD file
If the name of the device driver file associated with your
printer has a file extension of .WPD, follow these

1. Install the PSCRIPT.DRV printer driver from your SDL
disk 4, using steps 2 through 10 from the previous
section, "Installing a printer driver."

2. Select Postscript Printer from the Installed Printers
list box.

3. Choose Configure.

4. Choose Setup.

The postscript printer dialog box will appear.

5. Choose Add Printer.

6. Type the name of the drive that contains disk 4 of the
Supplemental Driver Library.

Control Panel displays a list of additional postscript
printers that can be installed.

7. Select the printer from the Add Printer list box.

8. Choose Add.

Control Panel will install the printer.

9. Choose Done.

10. Choose OK three times and close Control Panel.

Installing the Access Pack software for persons with disablities
This library includes the Access Pack, which makes it easier
for persons who have trouble controlling the keyboard and
mouse to use Windows 3.0. The Access Pack includes three
keyboard drivers, a mouse driver, a utility program, and a
guide. For more information, see the ACCESS.WRI file,
included in this library.

To install the Access Pack software, you must use a text
editor such as Notepad to edit your SYSTEM.INI file.
You can find this file in your Windows directory. For more
information about the format of this file and changing its
values, see the SYSINI.TXT file in your Windows directory.

First you must check two entries in this file to make sure
that the Access software is compatible with your system. To
install the Access software, you must currently have the
following line in the [boot] section of your SYSTEM.INI

mouse.drv = mouse.drv

In addition, you must have one of the following three lines:

keyboard.drv = keyboard.drv
keyboard.drv = kbdoli.drv
keyboard.drv = kbdhp.drv

If your mouse.drv= or keyboard.drv= entries do not match one
of these entries, your hardware is not compatible with the
Access software.

In the [boot] section of SYSTEM.INI, you will find an entry
starting with "mouse.drv=". Depending on the remainder of
this line, you will have to take different action, as shown
in the following chart:

Current line Action
-------------------- ------------------------------
mouse.drv=mouse.drv Copy the AP-MOU.DRV file from
your SDL disk 2 to your
Windows directory. Change the
current mouse.drv line in


mouse.drv= You cannot install the Access

keyboard.drv=keyboard.drv Copy the AP-KBD.DRV file from
your SDL disk 2 to your
Windows directory. Change the
current keyboard.drv line in


keyboard.drv=kbdoli.drv Copy the AP-KBDOL.DRV file
from your SDL disk 2 to your
Windows directory. Change the
current keyboard.drv line in


keyboard.drv=kbdhp.drv Copy the AP-KBDHP.DRV file
from your SDL disk 2 to your
Windows directory. Change the
current keyboard.drv line in


keyboard.drv= You cannot install the Access

In addition, you must always perform the following steps:

1. Copy the ACCESS.EXE and ACCESS.WRI files from your SDL
disk 2 to your Windows directory.

2. Start Windows Program Manager

3. Create a new program item in your Accessories group, with
the following properties:

Title: Access

For instructions on creating new program items, see Chapter
3 of the Windows User's Guide.

Printers Supported in this packageDriver name Located on Disk
Agfa 9000 Series PSPSCRIPT.DRVDisk 4
Agfa Compugraphic 400PSPSCRIPT.DRVDisk 4
Agfa Compugraphic GenicsHPPCL.DRVDisk 3
AMT Accel 500ACCEL.DRVDisk 3
AMT Accel 535ACCEL.DRVDisk 3
Apple LaserWriterPSCRIPT.DRVDisk 4
Apple LaserWriter II NT/NTXPSCRIPT.DRVDisk 4
Apple LaserWriter PlusPSCRIPT.DRVDisk 4
Apricot LaserHPPCL.DRVDisk 3
AST TurboLaser/PS - R4081PSCRIPT.DRVDisk 4
Bitstream FlexFLEX.DRVDisk 2
Brother HL-4BROHL.DRVDisk 4
Brother HL-8eBROHL.DRVDisk 4
Brother M-1809-EpsonBROTH9.DRVDisk 4
Brother M-1824LBROTH24.DRVDisk 4
Brother M-1909-EpsonBROTH9.DRVDisk 4
Brother M-1924LBROTH24.DRVDisk 4
Canon BJ-10eCANON10e.DRVDisk 4
Canon BJ-130eCANON130.DRVDisk 4
Dataproducts LZR-2665PSCRIPT.DRVDisk 4
Digital LN03R ScriptPrinterPSCRIPT.DRVDisk 4
Digital LPS PrintServer 40PSCRIPT.DRVDisk 4
Epson EPL-6000HPPCL.DRVDisk 3
HP LaserJetHPPCL.DRVDisk 3
HP LaserJet 2000HPPCL.DRVDisk 3
HP LaserJet 500+HPPCL.DRVDisk 3
HP LaserJet IID(Postscript cart.)HPIID522.WPDDisk 4
HP LaserJet IIP (Postscript cart.)HPIIP522.WPDDisk 4
HP LaserJet III (Postscript cart.)HPIII522.WPDDisk 4
HP LaserJet PlusHPPCL.DRVDisk 3
HP LaserJet Series IIHPPCL.DRVDisk 3
IBM Personal Page Printer II-030PSCRIPT.DRVDisk 4
IBM Personal Page Printer II-031PSCRIPT.DRVDisk 4
IBM Personal PageprinterPSCRIPT.DRVDisk 4
IBM Quickwriter 5204IBM5204.DRVDisk 2
IBM 4019 v52.1 (17 Fonts)IBM17521.WPDDisk 4
IBM 4019 v52.1 (39 Fonts)IBM39521.WPDDisk 4
JDL 850JDL850.DRVDisk 2
JDL 950JDL850.DRVDisk 2
Kodak Diconix 150DCNX150.DRVDisk 2
Kodak Diconix 150 PlusDCNX150P.DRVDisk 2
Kyocera F-SeriesHPPCL.DRVDisk 3
Linotronic 100/300/500PSCRIPT.DRVDisk 4
NEC Silentwriter LC 860HPPCL.DRVDisk 3
NEC Silentwriter LC 860 PlusHPPCL.DRVDisk 3
NEC Silentwriter LC 890PSCRIPT.DRVDisk 4
NEC Silentwriter LC 890XLPSCRIPT.DRVDisk 4
NEC Silentwriter2 90 v52.2N2090522.WPDDisk 4
NEC Silentwriter2 290 v52.0N2290520.WPDDisk 4
Okidata 380OKI24PLS.DRVDisk 3
Okidata 390 PlusOKI24PLS.DRVDisk 3
Okidata 391 PlusOKI24PLS.DRVDisk 3
Okidata 393 C PlusOKI24PLS.DRVDisk 3
Okidata 393 PlusOKI24PLS.DRVDisk 3
Okidata LaserLine 6HPPCL.DRVDisk 3
Okidata OL-820OL820.DRVDisk 2
Okidata OL840/PS v51.8OL840518.WPDDisk 4
Olivetti DM-309DM309.DRVDisk 2
Olivetti ETV 5000HPPCL.DRVDisk 3
Olivetti PG 108HPPCL.DRVDisk 3
Olivetti PG 208 M2HPPCL.DRVDisk 3
Olivetti PG 303PSCRIPT.DRVDisk 4
Olivetti PG 308 HSHPPCL.DRVDisk 3
Olivetti PG 308 HSPSCRIPT.DRVDisk 4
QMS ColorScript 100PSCRIPT.DRVDisk 4
QMS PS 820 TurboQ820_517.WPDDisk 4
QMS PS 2200 v51.0Q2200510.WPDDisk 4
QuadLaser IHPPCL.DRVDisk 3
Seiko CH-5504CH5500.DRVDisk 2
Seiko CH-5514CH5500.DRVDisk 2
Star NX-1000 IISTARM9.DRVDisk 4
Star XB-2410STARM24.DRVDisk 4
Star XB-2415STARM24.DRVDisk 4
Tandy LP-1000HPPCL.DRVDisk 3
Tegra GenesisHPPCL.DRVDisk 3
TI MicroLaser PS17 v52.1TIM17521.WPDDisk 4
TI MicroLaser PS35 v52.1TIM35521.WPDDisk 4
TI OmniLaser 2108PSCRIPT.DRVDisk 4
TI OmniLaser 2115PSCRIPT.DRVDisk 4
Toshiba PageLaser12HPPCL.DRVDisk 3
Unisys AP9415 v47.0U9415470.WPDDisk 4
Varityper VT-600PSCRIPT.DRVDisk 4
Wang LCS15 FontPlusPSCRIPT.DRVDisk 4

Displays Supported in this package
ATI Mode 54h (800x600 16 colors) v2.00
ATI Mode 55h (1024x768 16 colors) v2.00
CHIPS Super VGA 82C451 (800x600 16 colors)
CHIPS Super VGA 82C452 (800x600 16 colors)
CHIPS Super VGA 82C452 (1024x768 16 colors)
CHIPS Super VGA 82C452 (640x480 256 colors)
DGIS 3.x Medium Resolution w/VGA, Ver 1.01
DGIS 3.x High Resolution w/VGA, Ver 1.01
Paradise VGA (800x600 16 colors)
Paradise VGA (1024x768 16 colors)
Paradise VGA (640x480 256 colors)
Video Seven VGA (800x600 16 color)
Video Seven VGA (1024x768 16 color)
Video Seven VGA (640x480 256 color)

Other devices supported in this package
Novell Netware 2.10 or above
Novell Netware 386
Access for Microsoft, or IBM PS/2 mouse
Access for all keyboard types

 December 14, 2017  Add comments

Leave a Reply