Dec 122017
 
Microsoft Windows 3.1 drivers for Epson/Epson emulating printers.
File EP24.ZIP from The Programmer’s Corner in
Category Windows 3.X Files
Microsoft Windows 3.1 drivers for Epson/Epson emulating printers.
File Name File Size Zip Size Zip Type
DMCOLOR.DLL 18480 11328 deflated
EPSON24.DRV 17072 4160 deflated
LICENSE.TXT 4046 1771 deflated
OEMSETUP.BAK 1539 256 deflated
OEMSETUP.INF 1541 257 deflated
PRINTER.TXT 2608 906 deflated
UNIDRV.DLL 128240 62214 deflated
UNIDRV.HLP 45107 27588 deflated

Download File EP24.ZIP Here

Contents of the LICENSE.TXT file


MICROSOFT WINDOWS DRIVER LIBRARY

MICROSOFT SOFTWARE LICENSE


1. GRANT OF LICENSE. Microsoft grants to you the right
to use and to reproduce and distribute all or a
portion of the Windows Driver Library ("Software")
provided that (i) the Software is not distributed
for profit; (ii) the Software is used only in
conjunction with licensed copies of Microsoft Windows
3.xx products; (iii) the Software may NOT be modified;
(iv) all copyright notices are maintained on the
Software; and (v) the licensee/end user agrees to be
bound by the terms of this Agreement.

2.COPYRIGHT. The Software is owned by Microsoft or its
suppliers and is protected by United States copyright
laws and international treaty provisions. You may not
remove the copyright notice from any copy of the
Software or any copy of the written materials, if any,
accompanying the Software.

3.OTHER RESTRICTIONS. This Microsoft License Agreement
is your proof of license to exercise the rights granted
herein and must be retained by you. You may not rent
or lease the Software. You may not reverse engineer,
decompile or disassemble the Software.

NO WARRANTY. ANY USE BY YOU OF THE SOFTWARE IS AT YOUR
OWN RISK. THE SOFTWARE IS PROVIDED FOR USE ONLY WITH
MICROSOFT WINDOWS 3.XX AND RELATED SOFTWARE. THE
SOFTWARE IS PROVIDED FOR USE "AS IS" WITHOUT WARRANTY
OF ANY KIND. TO THE MAXIMUM EXTENT PERMITTED BY LAW,
MICROSOFT AND ITS SUPPLIERS DISCLAIM ALL WARRANTIES
OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING,
WITHOUT LIMITATION, IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
MICROSOFT IS NOT OBLIGATED TO PROVIDE ANY UPDATES TO
THE SOFTWARE.

NO LIABILITY FOR CONSEQUENTIAL DAMAGES. In no event
shall Microsoft or its suppliers be liable for any
damages whatsoever (including, without limitation,
incidental, direct, indirect special and
consequential damages, damages for loss of business
profits, business interruption, loss of business
information, or other pecuniary loss) arising out
of the use or inability to use this Microsoft
product, even if Microsoft has been advised of the
possibility of such damages. Because some states/
countries do not allow the exclusion or limitation
of liability for consequential or incidental damages,
the above limitation may not apply to you.

INDEMNIFICATION BY YOU. If you distribute the
Software in violation of this Agreement, you agree
to indemnify, hold harmless and defend Microsoft and
its suppliers from and against any claims or lawsuits,
including attorney's fees that arise or result from
the use or distribution of the Software in violation
of this Agreement.

U.S. GOVERNMENT RESTRICTED RIGHTS

The Software and documentation are provided with RESTRICTED
RIGHTS. Use, duplication, or disclosure by the Government
is subject to restrictions as set forth in subparagraph
(c)(1)(ii) of The Rights in Technical Data and Computer
Software clause at DFARS 252.227-7013 or subparagraphs
(c)(1) and (2) of the Commercial Computer Software -
Restricted Rights at 48 CFR 52.227-19, as applicable.
Manufacturer is Microsoft Corporation/One Microsoft
Way/Redmond, WA 98052-6399.

If you acquired this product in the United States, this
Agreement is governed by the laws of the State of Washington.

Should you have any questions concerning this Agreement, or
if you desire to contact Microsoft for any reason, please
contact your local Microsoft subsidiary or write: Microsoft
Customer Sales and Service/One Microsoft Way/Redmond, WA
98052-6399.

06/01/92 NEWLIC.DOC




 December 12, 2017  Add comments

Leave a Reply