Dec 062017
 
Clipper 5.2x patch to 5.2e , info .
File 52EUS.ZIP from The Programmer’s Corner in
Category Recently Uploaded Files
Clipper 5.2x patch to 5.2e , info .
File Name File Size Zip Size Zip Type
52EUS.TXT 30955 6724 deflated
TPCREAD.ME 199 165 deflated

Download File 52EUS.ZIP Here

Contents of the 52EUS.TXT file


Dear CA-Clipper 5.2 Developer,

This CA-Clipper 5.2e/ExoSpace 1.0g upgrade disk provides some additional
corrections that were made to both of these products after the
Clipper 5.2d/Exospace 1.0f-1 updates.

If you have an earlier CA-Clipper 5.2 version or Exospace 1.0 version,
this is a culmulative update which will bring these earlier versions up
to the current version (CA-Clipper 5.2e and Exospace 1.0g). This provides
any earlier updates, in addition to the ones listed in this file, without
the need for any other update disks or files.

The file CDXLOCK.OBJ is not needed with the DBFCDX.LIB RDD supplied by
this update. This file was used with a previous version of this RDD. The
CDX RDD in this update will provide FoxPro 2.6 compatible record and
record append locking without the use of this file.

The file NTXLOCK2.OBJ is used to provide a higher record locking offset
to the DBFNTX RDD. The default offset is 1,000,000,000 + recno(). If your
DBF file is 1,000,000,000 bytes in size and used in a multiuser
environment, then you will need to link in NTXLOCK2.OBJ to prevent physical
locking of the file. This will change the logical record locking address to
4Gb - recno(). This provides a maximum DBF file size of 2Gb. Applications
that use NTXLOCK2.OBJ will not be compatible with the default DBFNTX RDD
record locks. They should not be accessing the same files concurrently
with applications that use the default record locking offset.

The file CT2PATCH.OBJ is used for linking in Clipper Tools 2 with
CA-Clipper 5.2.

If you have any questions or problems, please contact CA-Clipper Technical
Support by calling 1-516-342-4612 or posting a message to CA-Clipper
Technical Support on the Clipper Forum (GO CLIPPER or GO CLIPGER) on
CompuServe.


This file contains:

A. The instructions for applying the CA-Clipper 5.2e upgrade to any
North American (US) version of CA-Clipper 5.2 including: 5.20, 5.2a,
5.2b, 5.2c or 5.2d.

It also contains instructions for applying the CA-Clipper 5.2e/
ExoSpace 1.0g upgrade.

The Exospace update is optional, so if you do not have Exospace,
you will still be able to apply the 5.2e Clipper update. Simply
answer "No" at the prompt when the question:

"Do you have ExoSpace installed ?"

is asked.

Please review the the UPDATE PROCESS instructions carefully before
applying the upgrade.

B. The list of problems resolved by CA-Clipper 5.2e.


=============================================================================

A. Instructions for upgrading Clipper 5.2 (any rev.) to 5.2e (rev. 216) and
ExoSpace (any installed version) to 1.0g version.

Ensure that you have atleast 525Kb of free DOS conventional memory as
reported by DOS's MEM utility. If not, then the PATCH.EXE utility may
not be executed correctly from within the installation program provided on
this disk.

If you can not free up this memory by loading DOS high and removing TSRs
and device drivers, then simply install the 5.2e update until the installer
attempts to execute PATCH.EXE and an "insufficient memory" occurs.

At this point, exit the installation program and manually update the
directories by copying PATCH.EXE and the corresponding .RTP file from
the 52e update disk into the correct directory.

EXAMPLE: C:\CLIPPER5\BIN> patch CL52eBIN

The correct directories
are as follows:

CL52eBIN.RTP Clipper BIN directory
CL52eLIB.RTP Clipper LIB directory
CL52eNG.RTP Clipper NG directory
CL52eSMP.RTP Clipper SOURCE\SAMPLE directory

EX10GBIN.RTP Exospace BIN directory
EX10GLIB.RTP Exospace LIB directory
EX10GNG.RTP Exospace NG directory

All files of the 5.2e update will have the same DATE/TIME stamp to make
checking for updated files easier.

Some operating systems (such as OS/2) may not allow PATCH.EXE to back date
a file's DATE/TIME stamp so a complete 5.2e file listing is provided.

UPDATE PROCESS:

1. Move to your CA-Clipper 5.2 directory.
EXAMPLE: C:\> CD\CLIPPER5

2. Backup your current version of CA-Clipper.
Do the same for ExoSpace IF you already have it installed.

3. If you have Clipper 5.2, 5.2a, 5.2b, 5.2c or 5.2d AND have any
problems installing the upgrade, please reinstall Clipper (and
Exospace if applicable) from the original disks and reapply the
5.2e update to this clean version of CA-Clipper 5.2 and Exospace
1.0. Then, copy these updated files into your working Clipper
directory if it is different from the clean Clipper installation
directory. This will overwrite files of the same name - updating
these files to the 5.2e version.

To determine the version of Clipper that you currently have.
At the DOS prompt type

C:\>Clipper


At the top of the screen, there will be the copyright header with
the version number.

You can also use the VERSION() function to determine which version of
Clipper that you have. Compile a 1 line TEST.PRG:

? Version()

Compile, link and run this TEST.EXE file.

4. Execute the installation program and follow the instructions.

EXAMPLE: A:\> INSTALL

- or -

EXAMPLE: C:\> A:INSTALL

5. After the installation program has successfully completed, compare the
date and time stamps of the updated files against the
LIST OF UPDATED FILES section.

6. Make sure that your PATH, INCLUDE, OBJ, and LIB environment variables
have been correctly set to point to the updated version of CA-Clipper.
Example:
C:\> SET PATH=C:\CLIP52e\BIN
C:\> SET INCLUDE=C:\CLIP52e\INCLUDE
C:\> SET OBJ=C:\CLIP52e\OBJ
C:\> SET LIB=C:\CLIP52e\LIB
C:\> SET PLL=C:\CLIP52e\PLL

NOTE: You could also add these settings in your AUTOEXEC.BAT file or
create a batch file with these DOS environment settings to
execute before using the Clipper compiler.

7. Move to your DBU directory and re-compile DBU.
EXAMPLE:
A:\> C:
C:\> CD \CLIPPER5\SOURCE\DBU
C:\CLIPPER5\SOURCE\DBU> SET RTLINKCMD=
C:\CLIPPER5\SOURCE\DBU> SET CLIPPERCMD=
C:\CLIPPER5\SOURCE\DBU> RMAKE DBU /F

Copy DBU.EXE to your BIN directory.
EXAMPLE:
C:\CLIPPER5\SOURCE\DBU> COPY DBU.EXE C:\CLIPPER5\BIN


8. Move to your RL directory and re-compile RL.
EXAMPLE:
C:\CLIPPER5\SOURCE\DBU> CD \CLIPPER5\SOURCE\RL
C:\CLIPPER5\SOURCE\RL> RMAKE RL /F

Copy RL.EXE to your BIN directory.
EXAMPLE:
C:\CLIPPER5\SOURCE\RL> COPY RL.EXE C:\CLIPPER5\BIN


9. Move to your PE directory and re-compile PE.
EXAMPLE:
C:\CLIPPER5\SOURCE\RL> CD \CLIPPER5\SOURCE\PE
C:\CLIPPER5\SOURCE\PE> RMAKE PE /F

Copy PE.EXE to your BIN directory.
EXAMPLE:
C:\CLIPPER5\SOURCE\PE> COPY PE.EXE C:\CLIPPER5\BIN


10. Move to your PLL directory and rebuild BASE52.PLL.
EXAMPLE:
C:\CLIPPER5\SOURCE\PE> CD \CLIPPER5\PLL
C:\CLIPPER5\PLL> RTLINK @BASE52

The message:

"Undefined Symbol(s)...should be resolved at .EXE generation time"

appears during this step and is normal when creating a Pre-Linked
Library (PLL).


11. The update process is now complete.


UPDATED FILES:

CA-Clipper 5.2e upgrade marks all CA-Clipper files with a
date stamp of 02-07-95 and a time stamp of 5:25am.

The ExoSpace upgrade IF APPLIED also updates its files with a
date stamp of 02-07-95 and a time stamp of 5:25am.

It should be easy to check if the upgrade was applied properly.
Check all directories for this date/time stamp and check for the
.RTPatch error file (PATCH.ERR). This error file will be added to
the directory that .RTPatch is processing if a problem occurs
during this patch process.

The exception are files from \PLL subdirectory.
They should still have a date stamp of 02-15-93 and a time stamp of
5:20am unless they were modified external from any CA-Clipper 5.2
updates.

The files DBU.EXE, RL.EXE, PE.EXE, BASE52.PLL and BASE52.PLT
will have the date and time stamp of when they were most
recently rebuilt, so they will not have the 02-07-95 date
and 5:25am time stamp.

The following subdirectories are created (if they do not exist)
under the SOURCE directory for API sample files:

SDX, ERROR, FILESYS, ITEM and VM

The following subdirectories are created (if they do not exist)
under the SOURCE directory for the extra sample files:

ERRORSYS, GETSYS and TBROW


The following is a complete list of CA-Clipper 5.2e files and their
directories:

Directory of \CLIPPER5\BIN
CL BAT 46 02-07-95 5:25a
RO COM 354 02-07-95 5:25a
RTLINKST COM 7,123 02-07-95 5:25a
RTLINK DAT 42,694 02-07-95 5:25a
CLD EXE 54,415 02-07-95 5:25a
CLIPPER EXE 198,968 02-07-95 5:25a
DBT52 EXE 7,349 02-07-95 5:25a
RMAKE EXE 40,133 02-07-95 5:25a
RTLINK EXE 356,011 02-07-95 5:25a
DBU EXE 403,456 02-07-95 5:25a
PE EXE 217,088 02-07-95 5:25a
RL EXE 345,088 02-07-95 5:25a
CLD HLP 19,677 02-07-95 5:25a
DBU HLP 19,962 02-07-95 5:25a
RTLINK HLP 8,416 02-07-95 5:25a

if Exospace installed:
EXO1 EXE 334,271 02-07-95 5:25a
EXOSPACE EXE 643,353 02-07-95 5:25a
EXO2 EXE 15,621 02-07-95 5:25a

Directory of \CLIPPER5\INCLUDE
EXTEND API 2,194 02-07-95 5:25a
FILESYS API 2,652 02-07-95 5:25a
GT API 2,734 02-07-95 5:25a
ITEM API 1,802 02-07-95 5:25a
RDD API 27,716 02-07-95 5:25a
VM API 1,093 02-07-95 5:25a
ERROR API 2,090 02-07-95 5:25a
FM API 811 02-07-95 5:25a
ASSERT CH 2,137 02-07-95 5:25a
BOX CH 907 02-07-95 5:25a
COLOR CH 389 02-07-95 5:25a
COMMON CH 1,203 02-07-95 5:25a
DBEDIT CH 748 02-07-95 5:25a
DBSTRUCT CH 368 02-07-95 5:25a
DIRECTRY CH 412 02-07-95 5:25a
ERROR CH 1,409 02-07-95 5:25a
FILEIO CH 1,469 02-07-95 5:25a
GETEXIT CH 522 02-07-95 5:25a
INKEY CH 8,579 02-07-95 5:25a
MEMOEDIT CH 1,073 02-07-95 5:25a
RESERVED CH 21,870 02-07-95 5:25a
SET CH 1,447 02-07-95 5:25a
SETCURS CH 534 02-07-95 5:25a
SIMPLEIO CH 800 02-07-95 5:25a
STD CH 51,453 02-07-95 5:25a
ACHOICE CH 951 02-07-95 5:25a
RDDSYS CH 342 02-07-95 5:25a
CLIPDEFS H 1,703 02-07-95 5:25a
EXTEND H 238 02-07-95 5:25a
EXTASM INC 1,233 02-07-95 5:25a
EXTENDA INC 15,847 02-07-95 5:25a
EXTENDA MAC 4,161 02-07-95 5:25a
RULES RMK 2,312 02-07-95 5:25a

Directory of \CLIPPER5\LIB
CLD LIB 80,719 02-07-95 5:25a
CLIPPER LIB 516,771 02-07-95 5:25a
EXTEND LIB 127,931 02-07-95 5:25a
DBFNTX LIB 38,977 02-07-95 5:25a
DBFNDX LIB 27,175 02-07-95 5:25a
ANSITERM LIB 12,321 02-07-95 5:25a
SAMPLES LIB 53,891 02-07-95 5:25a
NOVTERM LIB 13,857 02-07-95 5:25a
PCBIOS LIB 14,369 02-07-95 5:25a
DBFMDX LIB 90,757 02-07-95 5:25a
TERMINAL LIB 14,369 02-07-95 5:25a
DBFCDX LIB 99,255 02-07-95 5:25a
DBPX LIB 170,645 02-07-95 5:25a
RTLUTILS LIB 53,925 02-07-95 5:25a

if Exospace installed:
EXOSPACE LIB 113,973 02-07-95 5:25a

Directory of \CLIPPER5\NG
NG EXE 38,160 02-07-95 5:25a
C52G03B NG 364,056 02-07-95 5:25a
C52G02B NG 190,520 02-07-95 5:25a
C52G04B NG 45,731 02-07-95 5:25a
C52G05B NG 258,949 02-07-95 5:25a
C52G06B NG 25,376 02-07-95 5:25a
C52G07B NG 200,146 02-07-95 5:25a
C52G01B NG 1,255,971 02-07-95 5:25a
IERROR NG 22,817 02-07-95 5:25a

if Exospace installed:
EXOSPACE NG 110,905 02-07-95 5:25a

Directory of \CLIPPER5\OBJ
GT OBJ 9,754 02-07-95 5:25a
NTXLOCK2 OBJ 302 02-07-95 5:25a
CTUS OBJ 26,656 02-07-95 5:25a
CDXLOCK OBJ 6,679 02-07-95 5:25a
CT2PATCH OBJ 4,703 02-07-95 5:25a

Directory of \CLIPPER5\PLL
BASE52 LNK 1,995 02-15-93 5:20a
BASE52 PLL 353,280 02-15-93 5:20a
BASE52 PLT 33,215 02-15-93 5:20a

Directory of \CLIPPER5\SOURCE\DBU
DBU HLP 19,962 02-07-95 5:25a
DBU LNK 178 02-07-95 5:25a
DBU PRG 24,063 02-07-95 5:25a
DBUCOPY PRG 17,556 02-07-95 5:25a
DBUEDIT PRG 22,484 02-07-95 5:25a
DBUHELP PRG 3,217 02-07-95 5:25a
DBUINDX PRG 5,179 02-07-95 5:25a
DBUNET PRG 8,931 02-07-95 5:25a
DBUSTRU PRG 26,932 02-07-95 5:25a
DBUUTIL PRG 43,827 02-07-95 5:25a
DBUVIEW PRG 67,609 02-07-95 5:25a
DBU RMK 967 02-07-95 5:25a

Directory of \CLIPPER5\SOURCE\ERROR
FILEOPEN C 2,714 02-07-95 5:25a

Directory of \CLIPPER5\SOURCE\ERRORSYS
CUST DBF 227 02-07-95 5:25a
ERR01 PRG 404 02-07-95 5:25a
ERR02 PRG 718 02-07-95 5:25a
ERR03 PRG 673 02-07-95 5:25a
ERR04 PRG 1,463 02-07-95 5:25a
ERR05 PRG 642 02-07-95 5:25a
ERR07 PRG 957 02-07-95 5:25a
ERR08 PRG 1,216 02-07-95 5:25a
ERR12 PRG 1,760 02-07-95 5:25a
ERR13 PRG 2,403 02-07-95 5:25a
ERR14 PRG 2,793 02-07-95 5:25a
ERR17 PRG 953 02-07-95 5:25a
ERR16 PRG 2,230 02-07-95 5:25a
ERR15 PRG 1,741 02-07-95 5:25a
ERR18 PRG 1,088 02-07-95 5:25a
ERR11 PRG 2,132 02-07-95 5:25a
ERR09 PRG 1,864 02-07-95 5:25a
ERR10 PRG 2,059 02-07-95 5:25a
ERR06 PRG 333 02-07-95 5:25a
ERRORSYS RMK 1,047 02-07-95 5:25a

Directory of \CLIPPER5\SOURCE\FILESYS
FILEOPEN C 2,714 02-07-95 5:25a

Directory of \CLIPPER5\SOURCE\GETSYS
GET10 PRG 3,345 02-07-95 5:25a
GET12 PRG 608 02-07-95 5:25a
GET3 PRG 2,993 02-07-95 5:25a
GET7 PRG 1,654 02-07-95 5:25a
GET4 PRG 2,152 02-07-95 5:25a
GET5 PRG 1,390 02-07-95 5:25a
GET6 PRG 1,745 02-07-95 5:25a
GET9 PRG 1,111 02-07-95 5:25a
GETMEMO PRG 2,286 02-07-95 5:25a
GETPSW PRG 2,085 02-07-95 5:25a
NESTREAD PRG 715 02-07-95 5:25a
GETSYS1 PRG 14,841 02-07-95 5:25a
MODGET PRG 676 02-07-95 5:25a
GET11 PRG 1,135 02-07-95 5:25a
SAYSCROL PRG 3,345 02-07-95 5:25a
GET2 PRG 2,270 02-07-95 5:25a
GET1 PRG 1,379 02-07-95 5:25a
GET13 PRG 1,435 02-07-95 5:25a
GETSYS RMK 1,046 02-07-95 5:25a

Directory of \CLIPPER5\SOURCE\ITEM
CC C 1,410 02-07-95 5:25a
DFUNC C 1,356 02-07-95 5:25a
ISDBL C 609 02-07-95 5:25a
UACLN C 1,888 02-07-95 5:25a
UARRY C 1,863 02-07-95 5:25a
UEVAL C 893 02-07-95 5:25a
YESNO C 837 02-07-95 5:25a
CCTST PRG 641 02-07-95 5:25a
DFUNCTST PRG 584 02-07-95 5:25a
ISDBLTST PRG 1,229 02-07-95 5:25a
TESTBED PRG 854 02-07-95 5:25a
UACLNTST PRG 1,274 02-07-95 5:25a
UARRYTST PRG 1,180 02-07-95 5:25a
UEVALTST PRG 2,121 02-07-95 5:25a
CCTST RMK 436 02-07-95 5:25a
DFUNCTST RMK 428 02-07-95 5:25a
ISDBLTST RMK 475 02-07-95 5:25a
UACLNTST RMK 435 02-07-95 5:25a
UARRYTST RMK 443 02-07-95 5:25a
UEVALTST RMK 479 02-07-95 5:25a

Directory of \CLIPPER5\SOURCE\PE
PE PRG 12,282 02-07-95 5:25a
PE RMK 314 02-07-95 5:25a

Directory of \CLIPPER5\SOURCE\RL
RLBACK PRG 40,489 02-07-95 5:25a
RLDIALG PRG 10,626 02-07-95 5:25a
RLFRONT PRG 40,165 02-07-95 5:25a
RL RMK 436 02-07-95 5:25a

Directory of \CLIPPER5\SOURCE\SAMPLE
EXAMPLEA ASM 6,720 02-07-95 5:25a
TEMPLATE ASM 826 02-07-95 5:25a
SOUNDEX C 3,704 02-07-95 5:25a
STUFF C 2,982 02-07-95 5:25a
ARRAY CH 660 02-07-95 5:25a
DICT CH 218 02-07-95 5:25a
FILEMAN CH 1,636 02-07-95 5:25a
LOCKS87 CH 918 02-07-95 5:25a
TIME87 CH 1,156 02-07-95 5:25a
BROWSE PRG 10,294 02-07-95 5:25a
TBDEMO PRG 12,398 02-07-95 5:25a
AMPM PRG 673 02-07-95 5:25a
ARRAY PRG 10,931 02-07-95 5:25a
ASRTDEMO PRG 1,562 02-07-95 5:25a
BOX PRG 4,213 02-07-95 5:25a
DATE PRG 4,959 02-07-95 5:25a
DAYS PRG 406 02-07-95 5:25a
DBF PRG 364 02-07-95 5:25a
DICT PRG 6,183 02-07-95 5:25a
DOT PRG 111,557 02-07-95 5:25a
ELAPTIME PRG 668 02-07-95 5:25a
ENVIRON PRG 5,953 02-07-95 5:25a
FILEDEMO PRG 363 02-07-95 5:25a
FILEIO PRG 9,230 02-07-95 5:25a
FILEMAN PRG 37,266 02-07-95 5:25a
FKLABEL PRG 367 02-07-95 5:25a
FKMAX PRG 369 02-07-95 5:25a
GAUGDEMO PRG 1,318 02-07-95 5:25a
GAUGE PRG 4,108 02-07-95 5:25a
ITERATOR PRG 1,552 02-07-95 5:25a
KEYBOARD PRG 632 02-07-95 5:25a
LENNUM PRG 318 02-07-95 5:25a
LOCKS PRG 4,109 02-07-95 5:25a
MOD PRG 2,577 02-07-95 5:25a
NUM PRG 8,060 02-07-95 5:25a
PRINT PRG 1,111 02-07-95 5:25a
READKEY PRG 2,361 02-07-95 5:25a
SCROLBAR PRG 3,403 02-07-95 5:25a
SECS PRG 561 02-07-95 5:25a
STACK PRG 3,818 02-07-95 5:25a
STATUS PRG 1,626 02-07-95 5:25a
STRING PRG 2,325 02-07-95 5:25a
STRZERO PRG 986 02-07-95 5:25a
TIME PRG 2,029 02-07-95 5:25a
TSTRING PRG 556 02-07-95 5:25a
VALEDIT PRG 3,623 02-07-95 5:25a
FILEDEMO RMK 363 02-07-95 5:25a

Directory of \CLIPPER5\SOURCE\SDX
SDXDYN ASM 1,944 02-07-95 5:25a
SDX C 43,648 02-07-95 5:25a
SDXINTER C 7,781 02-07-95 5:25a
SDX H 3,876 02-07-95 5:25a
SDX LIB 16,935 02-07-95 5:25a
SDXINIT PRG 300 02-07-95 5:25a
SDX RMK 951 02-07-95 5:25a
README SDX 13,564 02-07-95 5:25a

Directory of \CLIPPER5\SOURCE\SYS
FRMDEF CH 2,331 02-07-95 5:25a
LBLDEF CH 1,074 02-07-95 5:25a
FRMBACK PRG 17,716 02-07-95 5:25a
FRMRUN PRG 28,257 02-07-95 5:25a
GETSYS PRG 16,703 02-07-95 5:25a
LBLBACK PRG 6,039 02-07-95 5:25a
LBLRUN PRG 7,192 02-07-95 5:25a
NTXERR PRG 1,449 02-07-95 5:25a
RDDSYS PRG 640 02-07-95 5:25a
ERRORSYS PRG 3,096 02-07-95 5:25a

Directory of \CLIPPER5\SOURCE\TBROW\ARRAYS
SAMPLES CH 4,728 02-07-95 5:25a
TBROWSE CH 885 02-07-95 5:25a
TBR24A PRG 3,781 02-07-95 5:25a
TBR61 PRG 4,195 02-07-95 5:25a
TBR26T PRG 695 02-07-95 5:25a
TBR26 PRG 5,826 02-07-95 5:25a
TBR24 PRG 4,050 02-07-95 5:25a
TBR27 PRG 3,324 02-07-95 5:25a
TBR25 PRG 4,672 02-07-95 5:25a
TBR23 PRG 3,929 02-07-95 5:25a
ARRAYS RMK 522 02-07-95 5:25a

Directory of \CLIPPER5\SOURCE\TBROW\BROTEXT
SAMPLES CH 4,728 02-07-95 5:25a
TBROWSE CH 885 02-07-95 5:25a
TBR29 PRG 5,132 02-07-95 5:25a
TBR28 PRG 5,102 02-07-95 5:25a
TBR30 PRG 6,209 02-07-95 5:25a
BROTEXT RMK 315 02-07-95 5:25a

Directory of \CLIPPER5\SOURCE\TBROW\GENERAL
MEMOTEST DBF 223 02-07-95 5:25a
TESTN DBF 709 02-07-95 5:25a
TEST1 DBF 4,166 02-07-95 5:25a
MEMOTEST DBT 3,731 02-07-95 5:25a
MEMOTEST NTX 2,048 02-07-95 5:25a
TESTN NTX 2,048 02-07-95 5:25a
TBKEYACT PRG 2,186 02-07-95 5:25a
TBR11 PRG 5,274 02-07-95 5:25a
TBR12 PRG 4,747 02-07-95 5:25a
TBR14 PRG 2,728 02-07-95 5:25a
TBR13 PRG 5,376 02-07-95 5:25a
TBR15 PRG 4,402 02-07-95 5:25a
TBR16 PRG 5,132 02-07-95 5:25a
TBR17 PRG 6,366 02-07-95 5:25a
TBR18 PRG 4,128 02-07-95 5:25a
TBR33 PRG 9,007 02-07-95 5:25a
TBR3 PRG 4,025 02-07-95 5:25a
TBR4 PRG 4,008 02-07-95 5:25a
TBR6 PRG 3,816 02-07-95 5:25a
TBR7 PRG 3,784 02-07-95 5:25a
TBR9 PRG 3,844 02-07-95 5:25a
TBR8 PRG 4,416 02-07-95 5:25a
TBR9A PRG 4,204 02-07-95 5:25a
TBR10 PRG 5,497 02-07-95 5:25a
TESTB PRG 2,241 02-07-95 5:25a
BRFUNC PRG 4,240 02-07-95 5:25a
TBR2 PRG 2,961 02-07-95 5:25a
MAKEBASE PRG 1,427 02-07-95 5:25a
TBR1 PRG 2,185 02-07-95 5:25a
TBR32 PRG 2,631 02-07-95 5:25a
TBR5 PRG 5,588 02-07-95 5:25a
GENERAL RMK 1,376 02-07-95 5:25a

Directory of \CLIPPER5\SOURCE\TBROW\LIB
BRARRSKI PRG 995 02-07-95 5:25a
BROWGET PRG 3,247 02-07-95 5:25a
BROWMOVE PRG 1,074 02-07-95 5:25a
BROWSEEK PRG 1,149 02-07-95 5:25a
BROWSKIP PRG 1,706 02-07-95 5:25a
BROWSTAB PRG 571 02-07-95 5:25a
SCRUTI PRG 2,290 02-07-95 5:25a
SETUTI PRG 939 02-07-95 5:25a
SHADOW PRG 405 02-07-95 5:25a
TIMEOUT PRG 1,258 02-07-95 5:25a

Directory of \CLIPPER5\SOURCE\TBROW\N_COMMDR
MANAGER CH 870 02-07-95 5:25a
MANAGDBF PRG 5,472 02-07-95 5:25a
MANAGDCR PRG 6,927 02-07-95 5:25a
MANAGER PRG 12,903 02-07-95 5:25a
MANAGMIS PRG 4,365 02-07-95 5:25a
MANAGVEW PRG 1,803 02-07-95 5:25a
MANAGINF PRG 970 02-07-95 5:25a
MANAGER RMK 563 02-07-95 5:25a

Directory of \CLIPPER5\SOURCE\TBROW\SKIPDBF
FILE1 DBF 144 02-07-95 5:25a
FILE2 DBF 677 02-07-95 5:25a
PLACES DBF 1,679 02-07-95 5:25a
TEST2 DBF 471 02-07-95 5:25a
TEST DBF 3,116 02-07-95 5:25a
FILE1 NTX 2,048 02-07-95 5:25a
FILE2 NTX 2,048 02-07-95 5:25a
PLACES NTX 2,048 02-07-95 5:25a
TEST2 NTX 2,048 02-07-95 5:25a
TBR23A PRG 6,794 02-07-95 5:25a
TBR22 PRG 5,397 02-07-95 5:25a
TBR21 PRG 5,808 02-07-95 5:25a
TBR19 PRG 4,272 02-07-95 5:25a
TBR20 PRG 7,445 02-07-95 5:25a
SKIPDBF RMK 402 02-07-95 5:25a

Directory of \CLIPPER5\SOURCE\TBROW\SPRDSHT
BUTTONS CH 763 02-07-95 5:25a
SPRDSHT CH 922 02-07-95 5:25a
SPRDFOR DBF 3,485 02-07-95 5:25a
SPRDVAL DBF 1,325 02-07-95 5:25a
QUITIT PRG 3,624 02-07-95 5:25a
MISCSPRD PRG 5,643 02-07-95 5:25a
BUTTONS PRG 3,394 02-07-95 5:25a
SPRDSHT PRG 21,483 02-07-95 5:25a
SPRDSHT RMK 409 02-07-95 5:25a

Directory of \CLIPPER5\SOURCE\TBROW\TBRNET
NET CH 884 02-07-95 5:25a
TBR31 CH 1,272 02-07-95 5:25a
TBR31 DBF 22,891 02-07-95 5:25a
TBR31_1 NTX 11,264 02-07-95 5:25a
TBR31_2 NTX 6,144 02-07-95 5:25a
NET PRG 2,327 02-07-95 5:25a
SCRUTI PRG 2,185 02-07-95 5:25a
TBR PRG 3,497 02-07-95 5:25a
TBR31 PRG 4,697 02-07-95 5:25a
TBR31 RMK 333 02-07-95 5:25a
SEMAPH TBR 4 02-07-95 5:25a

Directory of \CLIPPER5\SOURCE\VM
BOOTSEC C 1,996 02-07-95 5:25a
CCVM C 1,372 02-07-95 5:25a
HEXAMP C 1,122 02-07-95 5:25a
VMCOPY C 12,498 02-07-95 5:25a
BOOTREAD PRG 603 02-07-95 5:25a
CCVMTST PRG 661 02-07-95 5:25a
TESTBED PRG 854 02-07-95 5:25a
VCOPYTST PRG 863 02-07-95 5:25a
BOOTREAD RMK 245 02-07-95 5:25a
CCVMTST RMK 440 02-07-95 5:25a
VCOPYTST RMK 462 02-07-95 5:25a


=============================================================================

B. Known problems resolved by CA-Clipper 5.2e:

o General DBFCDX RDD stability problems.

o DBFCDX RDD compability problems with FoxPro 2.6 during record locking
and record append locking.

o 1210 errors with DBFCDX RDD after a reindex.

o Corrected problem with APPEND BLANK (dbappend()) if optional argument was
not passed to function.

o Corrected General Protection Fault (GPF) in PICTURE clause.

o Corrected GPF in ERRORSYS when constantly selecting "Retry" in Error
Alert box.

o Corrected GPF in SET ORDER TO (OrdSetFocus()) when used in a loop.

o Corrected Virtual Memory Integrity Failure (VMIF) error in TBrowse
stabilization.

o Corrected GPF in TBrowse STABILIZE() method with repeated
CTRL-PGDN/CTRL-PGUP key events.

o Added reserved words in NG file and Reserved.ch file.

o Added error handling code to NTXERR.PRG.

o Enhanced NG file for TBrowse, Get and Error Classes.

o And last, but not least...

enjoy the added samples

=============================================================================
=============================================================================


 December 6, 2017  Add comments

Leave a Reply