********************************************************************************
********************************************************************************

README FILE FOR HEWLETT-PACKARD INTELLIFONT(R)-FOR-WINDOWS(R) 3.0 VERSION 1.0

********************************************************************************
********************************************************************************

This README file contains the following information:

* Hewlett-Packard Intellifont-for-Windows 3.0 Introduction
* Operating Requirements
* Installation Instructions
* Features of Hewlett-Packard Intellifont-for-Windows 3.0
* HPPCL5A Printer Driver Enhancements
* User Hints
* HP Personal Peripherals Assist Line

*******************************************************************************

INFORMATION PROVIDED IN THIS DOCUMENT AND ANY SOFTWARE THAT MAY ACCOMPANY THIS
DOCUMENT (collectively referred to as Hewlett-Packard
Intellifont-for-Windows 3.0) IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND,
EITHER EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES
OF MERCHANTABILITY AND/OR FITNESS FOR A PARTICULAR PURPOSE. The user assumes
the entire risk as to the accuracy and the use of Hewlett-Packard
Intellifont-for-Windows 3.0. Hewlett-Packard Intellifont-for-Windows 3.0 may be
copied and distributed subject to the following conditions: 1) All text must be
copied without modification and all pages must be included; 2) If software is
included, all files on the disks must be copied without modification (the DOS
utility DISKCOPY is appropriate for this purpose); 3) All components of
Hewlett-Packard Intellifont-for-Windows 3.0 must be distributed together; and
4) Hewlett-Packard Intellifont-for-Windows 3.0 may not be distributed for
profit.

Copyright (c) 1990, 1991 Hewlett-Packard Company. All Rights Reserved.
Univers is a product of; and Intellifont is a registered trademark of AGFA
Compugraphic, a division of Agfa Corporation.
IBM PC and PC-DOS are trademarks of International Business Machines Corporation.
MS-DOS and Windows are registered trademarks of Microsoft Corporation.

*******************************************************************************

HEWLETT-PACKARD INTELLIFONT-FOR-WINDOWS 3.0 INTRODUCTION

********************************************************************************

Hewlett-Packard Intellifont-for-Windows 3.0 lets you create on-the-fly screen
fonts and more.

Hewlett-Packard Intellifont-for-Windows 3.0 gives most Microsoft Windows applications
the same font scaling technology as the HP LaserJet III printer family.
Without leaving your application, you get type that looks as good on-screen as
it does when it comes off your printer without using valuable disk space to
store bitmapped screen fonts.

Hewlett-Packard Intellifont-for-Windows 3.0 gives you:

- High-quality screen fonts - no more jagged edges on displays.
- On-the-fly screen fonts and type scaling - instant screen fonts in the
styles and sizes you want from within your Windows 3.0 applications.
- Matching screen fonts for HP LaserJet III/IIID printer's resident scalable
typefaces - What-You-See-Is-What-You-Get printing.

Hewlett-Packard Intellifont-for-Windows 3.0 includes eight scalable screen typefaces in
popular CG Times and Univers, and it opens the door to installing a variety of
other type products from the HP MasterType Library. You can purchase and
install into Windows 3.0 any of HP's MasterType Library products which
includes scalable typeface collections on cartridge or disk and more than
twenty individual scalable typefaces.

Please feel free to copy the Hewlett-Packard Intellifont-for-Windows 3.0 disks subject to the
above restrictions.


*******************************************************************************

OPERATING REQUIREMENTS

*******************************************************************************

Printer: HP LaserJet III printer family
Computer: IBM PC/AT compatible (286 and above) with high-density
floppy drive
Software: MS-DOS (or PC-DOS) Version 3.1 or later
Microsoft Windows 3.0 running in standard or enhanced
mode - real mode is not supported
Memory: Minimum of 1 megabyte of extended RAM
2 megabytes recommended
Free Disk Space: Minimum of 2 megabytes


*******************************************************************************

INSTALLATION INSTRUCTIONS

*******************************************************************************

To install Hewlett-Packard Intellifont-for-Windows 3.0:

1. Make sure Windows 3.0 is installed and runs in Standard or Enhanced mode.
Check which mode Windows 3.0 is running by choosing Help from the
Program Manager Window and then choose About.
2. Select the HP LaserJet III or IIID printer driver through the Windows 3.0
Control Panel.
3. Exit Windows 3.0 completely and return to a DOS prompt (do not use the DOS
icon).
4. Insert Disk 1 of Hewlett-Packard Intellifont-for-Windows 3.0 Version 1.0 in
your floppy drive.
5. From the DOS prompt of your floppy disk drive, type "IFWSETUP" and press
[ENTER].

Example:
A:[ENTER]
IFWSETUP[ENTER]

6. Follow the instructions that appear on the screens to complete
installation.

Hint for selecting the directory for your Typeface Files and Intellifont
Summary Files:

Input the directory where you have previously installed scalable
typefaces. The installation program recognizes scalable typefaces.

Scalable typefaces could have been installed through Type Director or
AutoFont. Typefaces installed through Type Director, scalable soft
fonts installed through AutoFont, and screen fonts installed through
AutoFont are placed in the \td\type directory of the destination drive.

If you specify a directory, (i.e. \td\type) where typefaces have already
been installed, as the directory for placing your Intellifont support
files, the Hewlett-Packard Intellifont-for-Windows 3.0 installation
program will recognize the typefaces and will install them for use as
scalable screen fonts.


An instruction guide called IFWGUIDE.WRI in Microsoft Write format will be
placed in your Windows 3.0 directory for viewing and printing.

When running Windows 3.0, look for the Intellifont Icon in the Accessories
Group to verify installation. If you have additional fonts to install, double
click on the Intellifont icon and click on the Fonts button to open the HP Font
Installer window.

In the Hewlett-Packard Font Installer notice the typefaces listed in the left
hand box. If the typeface has a small dot in front of it, it has been installed
for scalable screen fonts.

To create printer fonts to match your scalable screen fonts, see the
section "FEATURES OF HEWLETT-PACKARD INTELLIFONT-FOR-WINDOWS 3.0 - New
Hewlett-Packard Font Installer with AutoFont Support" for instructions.

*******************************************************************************
PROBLEMS INSTALLING HEWLETT-PACKARD INTELLIFONT-FOR-WINDOWS 3.0?
*******************************************************************************

**********
If you see this error message,
_______________________________________________________________________________
|Missing Driver
|
|
|
|
| You need to install the Windows 3.0 HP LaserJet III Printer Driver
| Refer to the Hewlett-Packard Intellifont-for-Windows 3.0 Information Guide.
|
| Press [Enter] to continue.
|
|_______________________________________________________________________________

you need to run Windows 3.0 and setup the HP LaserJet III printer driver before
installing Hewlett-Packard Intellifont-for-Windows 3.0. The following procedure
installs the HP LaserJet III printer driver and updates the win.ini file with
information needed by the driver and by the Hewlett-Packard
Intellifont-for-Windows 3.0 installation program.


1. Choose Control Panel from the Main Group in Program Manager.
The Control Panel window appears.
2. Choose the Printers icon from the Control Panel window.
The Printers dialog box appears.

If you have already installed the HP LaserJet III printer driver, highlight
the corresponding line from the Installed Printers dialog box and continue
at #8.

3. Choose the Add Printer button.
4. From the List of Printers dialog box, select the HP LaserJet III printer.
5. Choose install.
6. Insert the Windows 3.0 Setup Disk 5 and press [Enter].
7. Highlight the "HP LaserJet III on None, Inactive" line in the Installed
Printers dialog box.
8. Choose Configure.
9. Highlight the correct printer port from the Ports list box.
10. Choose Setup.
11. Make any necessary changes in the Printer Setup screen to reflect your
printer's configuration.
12. Choose OK twice.
13. Choose Active.
14. Choose OK.
15. Continue from #3 of the Installation Instructions.

*******************************************************************************

FEATURES OF HEWLETT-PACKARD INTELLIFONT-FOR-WINDOWS 3.0

*******************************************************************************

* Intellifont Integration
* Scalable Screen Font Files
* New Hewlett-Packard Font Installer including AutoFont Support

Intellifont Integration - Hewlett-Packard Intellifont-for-Windows 3.0 includes
the Intellifont font scaling technology resident in the Hewlett-Packard
LaserJet III printer family. Intellifont scales screen fonts to all point sizes
supported by Windows 3.0. Screen fonts are created "on-the-fly" -- which means
enhanced performance and no need to use valuable disk space for bitmapped screen
fonts.

Scalable Screen Font Files - CG Times and Univers screen fonts are
included to match the Hewlett-Packard LaserJet III and IIID printers' internal
scalable typefaces.

New Hewlett-Packard Font Installer - Scalable typefaces and bitmapped fonts
can now be installed for use in both Windows 3.0 and your Hewlett-Packard
LaserJet III or IIID printer. The Hewlett-Packard font installer installs
typefaces and fonts from the following file types:

.FF AGFA Compugraphic FAIS file format. These files are usually on
diskette and are shipped with all Hewlett-Packard scalable font
products. The .FF file provides support for scalable printer fonts
and scalable screen fonts.

.TYP AGFA Compugraphic library file format. These files are placed in the
\TD\TYPE directory when you install a typeface through Type Director,
when you install a scalable soft font through HP's AutoFont, and when
you install a scalable cartridge with screen fonts through HP's
AutoFont. The .TYP file provides support for scalable printer fonts
and scalable screen fonts.

.PCM Printer Cartridge Metrics file. This file is created by the cartridge
vendor. PCM files are used for scalable and bitmapped cartridges that
are not supported by the Hewlett-Packard LaserJet III printer driver.
The PCM file only provides support for printer fonts. For scalable
cartridges the scalable screen fonts must be installed from a .FF
file or a .TYP file.

GLUE.TXT This file contains information for all products you install
with AutoFont Support. Soft fonts and cartridges, bitmapped or
scalable can be installed from the "glue.txt" file.

When prompted by the HP Font Installer for the drive\directory from
where you want to add fonts, input the drive\directory where your
"glue.txt" file is located (default directory for HP's AutoFont
program and for Type Director is C:\AUTOFONT). The HP Font Installer
reads the "glue.txt" file and displays a list of the typefaces that
have been installed with AutoFont support. When you add typeface(s),
the HP Font Installer creates a .PFM file for soft fonts and a .PCM
file for cartridge fonts from the AutoFont .TFM files. The HP Font
Installer installs the .PFM and .PCM files into Windows 3.0 for
access by the printer driver.

The GLUE.TXT file only provides support for printer fonts. For
scalable soft fonts and cartridges the scalable screen fonts must
be installed from a .FF file or a .TYP file.

.sfp Bitmapped soft font in portrait orientation. Intellifont screen fonts
are only available for bitmapped fonts that were created from an AGFA
Compugraphic library file (.TYP). Windows 3.0 will attempt to display
a rough representation of other bitmapped fonts.

.sfl Bitmapped soft font in landscape orientation. Intellifont screen
fonts are only available for bitmapped fonts that were created from
an AGFA Compugraphic library file (.TYP). Windows 3.0 will attempt
to display a rough representation of other bitmapped fonts.

AutoFont Support - AutoFont support incorporated into the Hewlett-Packard font
installer allows the installation of scalable typeface cartridges, scalable
soft fonts, bitmapped font AutoFont and bitmapped soft fonts into Windows 3.0
without first acquiring a Windows 3.0 metric file. AutoFont support works by
creating the Windows 3.0 metrics files from the .TFM files installed through
AutoFont.

********************************************************************************

HPPCL5A PRINTER DRIVER ENHANCEMENTS

********************************************************************************

Hewlett-Packard Intellifont-for-Windows 3.0 version 1.0 includes version 3.7 of
the HPPCL5A printer driver for the Hewlett-Packard LaserJet III and IIID printers.

Enhancements include:

* Print Model Improvement
* New and Improved Gray Scale Printing
* Font Downloading Optimizations

Print Model Improvement - The print model feature has been improved to include
printing patterned or shaded text and graphic images on all images
instead of only on black rectangles. If your application takes advantage of
the print model feature, you can print patterned or shaded text or graphic
images on any other patterned or shaded text or graphic image.

New and Improved Gray Scale Printing - The gray scale option has been expanded
to include optimal printing of scanned images. There are three choices in the
Gray Scale dialog box in the Printer Setup screen for printing gray scale
graphics: Photographic Images, Line Art Images, and HP ScanJet Images.

Photographic Images replaces the Gray Scale Graphics On selection
supported in Version 3.61 of the HPPCL5A driver. This method uses
an 8 bit by 8 bit super pixel to emulate 60 levels of gray. This
is up from 32 levels of gray supported in the previous version of
the driver. For improved photographic appearance, select
Photographic Images. Your images will have smooth, soft looking
contrasts between shades of gray. Images originally designed with
color will print better also.

Line Art Images replaces the Gray Scale Graphics Off selection
supported in Version 3.61 of the HPPCL5A driver. This method uses
patterns to emulate 32 levels of gray. It has been improved from
the previous version of the driver by supporting 32 new hand-tuned
patterned images. The benefits of this method is that is has fewer
artifacts and a better balance of gray tones than the old method,
yet all of the detail is preserved. Use this method for images
that have a "line draw" look such as clip art.

HP ScanJet Images is a new option for printing gray scale
graphics. This method uses a variation of the 8 bit by 8 bit
super pixel used in the Photographic Images method. The HP
ScanJet Images option is specially tuned for scanned images
from an HP ScanJet to give exceptional quality and clarity to
the printed images.

You may want to print your graphic images from more than one of
the Gray Scale printing methods. Only you can decide which method
creates the best output for your picture.

Font Downloading Optimizations - The HPPCL5A printer driver now downloads
individual characters of a symbol set to the printer as they are referenced,
rather than sending the entire symbol set at one time.

********************************************************************************

USER HINTS

********************************************************************************

When you install Hewlett-Packard Intellifont-for-Windows 3.0 an Information
Guide in Microsoft Write format called "ifwguide.wri" is installed in your
Windows 3.0 directory. Refer to this guide whenever problems or questions arise
concerning Hewlett-Packard Intellifont-for-Windows 3.0. The Information Guide
includes application notes for many Windows 3.0 applications.

Also, on-line help files are included for the Intellifont Icon, the HPPCL5A
Printer Driver and the HP Font Installer screens.

********************************************************************************

HEWLETT-PACKARD PERSONAL PERIPHERALS ASSIST LINE
(USA and Canada Only)

********************************************************************************

You can call the Hewlett-Packard Personal Peripherals Assist Line weekdays
between 7 a.m. and 6 p.m. (Mountain Standard Time), except for Wednesday when
the hours are 7 a.m. to 4 p.m.:

(208) 323-2551