Category : Word Processors
Archive   : SEDIT100.ZIP
Filename : SE.DOC

ÜÜÜÜÜÜ ÜÜÜÜÜÜ ÜÜÜÜÜ ÜÜÜÜÜÜ ÜÜÜÜÜÜÜ (tm)
ÝÝ ß ÝÝ ß ÝÝ ßÛ ß ÝÝ ß ÝÝ ß
ßßßßÛÛ ÛÛßß ÝÝ Û ÝÝ ÝÝ
Ü ÞÞ ÝÝ Ü ÝÝ ÜÛ ÝÝ Ü ÝÝ
ßßßßßß ßßßßßß ßßßßß ßßßßßß ßßß

v1.00


SEDIT, Copyright (c) 1992-93, J.E. Smith, All rights reserved.





TABLE OF CONTENTS


Introduction ...................................................... 1
Features .......................................................... 2
Distribution ...................................................... 3
Quick Start Installation .......................................... 4

Configuring SEDIT ................................................. 5
SE-CFG.EXE Program ........................................... 5
Internal Settings ............................................ 6

Static Key Commands ............................................... 8
Help System/Status Line............................................ 10
Hot-Keys .......................................................... 11
Field Editing ..................................................... 12
File Menu ......................................................... 13

Edit Menu ......................................................... 15
Window Menu ....................................................... 18
Locate Menu ....................................................... 19
Block Menu ........................................................ 21
Print Menu ........................................................ 23

Macro Menu ........................................................ 24
Spell Menu ........................................................ 25
Other Menu ........................................................ 26
Select File Window ................................................ 29
Select Word Window ................................................ 30

Technical Support and Upgrade Policy .............................. 31
Kudos ............................................................. 32
License Agreement and Other Legal Matters ......................... 33


INTRODUCTION SEDIT v1.00 pg. -1-
---------------------------------------------------------------------------


Welcome to SEDIT (Smith-EDIT)! SEDIT is a text editor originally
designed to compose and edit messages while using an offline mail
reader such as SPEED READ. However, its use is not limited to just
offline mail. It provides all the features needed to create small to
medium size text documents.

Major features included are multi-file editing (up to 4 files), search
and replace, block commands (copy, move, etc.), printing, keyboard
macros, user-defined wordwrap, paragraph/quoted text reformatting and a
spelling checker with a 50,000 word dictionary.

SEDIT was designed with ease of use in mind. Most commands are
available via pull-down menus. An extensive, on-line,
context-sensitive, hyper-text, help system is always available by
pressing (F1). A lot of thought and time went into SEDIT, I hope you
find it as useful as I do.

Many new features are planned for future versions of SEDIT. However,
they can only be implemented with your support. The registered version
of SEDIT removes the beginning and ending screens.

The cost of SEDIT is $25 (US funds). Include $5 shipping and handling
for orders outside the United States. Add $5 if you require SEDIT on a
3-1/2" disk. A completed and signed order form MUST accompany each
order. The order form is found in the file ORDER.SE, or you can print
one by pressing (ALT-O) on the opening/closing screen.

Orders are processed as they are received. Generally, they are shipped
within 7 days. However, please allow 2-8 weeks for delivery from the
time your order is mailed.

A lot of thought and time went into the design of SEDIT. I think you
will find it both intuitive and easy to use.


FEATURES SEDIT v1.00 pg. -2-
---------------------------------------------------------------------------


SEDIT was not designed as a "do all" or "be everything" editor. There
are plenty of other editors available for the "power-user". Instead
SEDIT was designed for small to medium sized editing tasks such as
replying to messages using an off-line mail reader, editing batch
files, writing quick memos, etc. SEDIT's emphasis is on ease of use
and user comfort. As such, SEDIT has the following limitations:

* 5,000 lines per file maximum. Additional lines are truncated.
* 1,024 column maximum. Additional columns are truncated.
* 4 concurrently opened files.

Major features include:

- Convenient pull-down menus.
- Most command key-strokes can be reconfigured.
- 10 user-defined keyboard macros.
- Option to swap out to XMS/EMS/DISK before running external programs.
- 5k delete/undelete buffer.
- Word wrap.
- Paragraph and quoted text reformatting.
- Support for editing up to four files simultaneously.
- Resizeable windows.
- Single key to toggle between vertical/horizontal split windows.
- Search and replace functions.
- Block functions: copy, delete, move, to clipboard, from clipboard.
- Print functions.
- Spelling checker with a 50,000 word dictionary.
- Option to spell-check as you type.
- Extensive, on-line, context-sensitive, hyper-text help system.
- Autoindent option.
- Strip trailing spaces option.
- User definable TAB size.
- DOS shell and DOS command option.
- Ability to change and save most settings within SEDIT.
- ...and much more.


DISTRIBUTION SEDIT v1.00 pg. -3-
---------------------------------------------------------------------------


SEDIT is distributed as shareware. It is *NOT* public domain, freeware
or "free software". You may evaluate SEDIT for 30 days, after which
you must either register it or stop using it. Registration is required
for use in a business, government or institutional setting.

Unaltered copies of SEDIT's *original* shareware distribution archive
may be freely copied and shared with others as long as no fee is
charged to do so. It may be uploaded to local and national BBS's.

Anyone desiring to distribute SEDIT by charging a per disk fee (i.e.
disk vendors) must obtain written permission from the author, J.E.
Smith, before doing so.

SEDIT may be distributed via subscription BBS's as long as no inference
is made that the subscription in any way pays for the use or evaluation
of SEDIT.


QUICK START INSTALLATION SEDIT v1.00 pg. -4-
---------------------------------------------------------------------------


SEDIT and its accompanying files should reside in the same directory.
Though it is not necessary, it is convenient if the directory is
included in the path statement. It is not necessary for SEDIT to be in
its own directory. For a list of directories included in the path type
PATH at a DOS prompt. If you have registered SEDIT, make sure your
CONFIG.SE file is in your SEDIT directory (the same directory where
SE.EXE is located). Start SEDIT by typing:

SE (ENTER)

Press any key to bypass the shareware screen (this is not present in
registered versions). Next you are shown a list of all files in the
current directory. You may edit the Filespec and press (ENTER) to
change the file list or press (TAB) to move the highlight bar to the
file list. Select the file you want to edit and press (ENTER) to load
it.

If you know the name of the file you want to edit before starting SEDIT
you can specify the name on the command line (up to four files). For
example:

SE file1.txt file2.txt file3.txt file4.txt (ENTER)

This will load file1.txt file2.txt file3.txt file4.txt into four
separate windows and allow you to edit each of them. If you do not
know the exact name of the file but know the extension you can start
SEDIT using DOS valid wild cards. For example:

SE *.TXT (ENTER)

This will start SEDIT and display a list of files in the current
directory matching the file selection argument of *.TXT. You can also
specify a full path name when using wild cards or a specific name. For
Example:

SE D:\DOC\*.TXT (ENTER)
SE D:\DOC\SE.DOC (ENTER)


**> NOTE <**

When used with an offline mail reader, it is usually necessary to swap
the mail reader to disk, EMS or XMS before running SEDIT. Due to
SEDIT's spelling checker, online help and other features it requires
more memory than a standard text editor.

CONFIGURING SEDIT
SE-CFG.EXE PROGRAM SEDIT v1.00 pg. -5-
---------------------------------------------------------------------------

Most of SEDIT's settings can be changed and saved from within the
program. Two notable exceptions are the color selection and key
bindings. These are changed with the SE-CFG.EXE configuration
program.

Custom settings are stored in the file SE.CFG. If SEDIT can find this
file at startup, the settings, as defined in SE.CFG, are used instead
of the default.


KEY BINDINGS

SE-CFG.EXE option (1). This screen allows you to define the keystrokes
used to execute SEDIT commands. Use the following keys to change the
key bindings:

(ARROWS) Move highlight bar.
(PGDN/PGUP) Move down/up five places.
(HOME/END) Move to the first/last item.
(SPACE) Tag an active key. Once tagged it will begin to blink.
(ENTER) Move a tagged (blinking) key to highlighted key.
(F2) Save displayed key bindings in SE.CFG file.
(TAB) Display alternate list. Use (SPACE) and (ENTER) as
defined above to change key bindings.
(ALT-X) Save settings and exit.
(ESC) Exit program, no save.


COLOR SELECTION

SE-CFG.EXE option (2). From this screen you can change the colors used
by SEDIT. Use the (UP-ARROW) and (DOWN-ARROW) to select which item to
change. Use the (LEFT-ARROW) and (RIGHT-ARROW) to change the color of
the highlighted item. Sample screens are provided to let you view your
selections. Other valid keys are:

(D) Toggle through various default settings.
(F2) Save the displayed colors as the default colors.
(ALT-X) Save settings and exit.
(ESC) Exit program, no save.

CONFIGURING SEDIT
INTERNAL SETTINGS SEDIT v1.00 pg. -6-
---------------------------------------------------------------------------

The following settings can be changed and saved within SEDIT using the
pull down menus.


LEFT MARGIN -- PRT MENU

The Left Margin command (ALT-I, by default) allows you to define the
number of spaces each line is indented when the file or a block is sent
to a text printer.


LINES PER PRINTED PAGE -- PRT MENU

The Lines/page command (ALT-H, by default) allows you to define the
number of lines printed on each page.


SPELL CHECK -- SPELL MENU

The Spell Check command (which is only accessible via the menus)
toggles the auto checking On or Off. If the auto checking is On, the
words are checked as you type them in. A beep sounds if SEDIT cannot
find the word in the dictionary. You may then either continue typing
or look the word up with the Check Word command. See also the SELECT
WORD WINDOW section.

AUTOINDENT -- OTHER MENU

The Autoindent command (which is only accessible via the menus) toggles
the auto indenting On or Off. If the auto indenting is On, the next
line indents the same number of spaces as the previous line when
(ENTER) is pressed or word wrap occurs.


STRIP TRAILING SPACES -- OTHER MENU

The Strip Spaces command (which is only accessible via the menus)
toggles the stripping of trailing spaces On or Off. If strip spaces is
On, any trailing spaces are removed whenever the line is active then
you move to another line.


WORD WRAP -- OTHER MENU

The Word Wrap command (CTRL-W, by default) allows you to define the
column in which word wrap will take place. To disable word wrap set
set this item to 0.

Word wrap is the process of ensuring a maximum length for each line.
Text is automatically moved to the next line when a character is
entered beyond the column defined in this setting. If a line becomes
too long as a result of inserting characters at its beginning, the
line/paragraph is adjusted with the Reformat command.

CONFIGURING SEDIT
INTERNAL SETTINGS -- continued SEDIT v1.00 pg. -7-
---------------------------------------------------------------------------

TAB SIZE -- OTHER MENU

The Tab Size command (ALT-T, by default) allows you to define the width
of the TAB stops. The default setting is eight. Each time (TAB) is
pressed the cursor moves to the next TAB stop (e.g. column 8, 16, 24,
etc).


SWAP SEDIT TO MEMORY OR DISK -- OTHER MENU

When this option is toggled On, SEDIT is moved out of conventional
memory before external programs, including DOS shells, are executed.
This frees more memory for the external program. SEDIT will attempt to
swap itself to high memory first. If there is not enough memory, it
will attempt to swap itself to disk. Toggle this option by pressing
(ENTER).

The advantage to swapping, as stated above, is the increased memory
capacity afforded the external program. However, it will take longer
to execute the program because of the time needed to remove SEDIT from
conventional memory. Disk swaps will take longer than memory swaps.
Therefore, if your applications will run without swapping, it is to
your advantage to leave this option toggled Off.


SAVE SETTINGS -- OTHER MENU

The Save Settings command (which is only accessible via the menus) will
save the various settings to the file SE.CFG.

It is possible to alter SEDIT's behavior when performing different
types of editing jobs, by placing a customized SE.CFG in different
places where SEDIT is started. Also you can specify a specific
configuration file via the command line. For example:

SE /C=D:\EDIT\SE.CFG

This will start SEDIT and use the configuration file SE.CFG located in
the D:\EDIT directory. Command line control options should always be
entered last. They should never be entered before a file name.


STATIC KEY COMMANDS SEDIT v1.00 pg. -8-
---------------------------------------------------------------------------


KEY COMMANDS

Some commands have a static or hard-coded keystroke associated with it.
These keystrokes cannot be changed via the configuration program.
Generally, these are common default keystrokes for most editors and
most also have a user-definable keystroke associated with it.

Most commands allow you define or assign a key to that particular
function. Since the keystrokes are subject to change the online help
and the manual will only refer to them by function and default
keystroke.

MOVEMENT

The following keys are used to move within a text file. These keys are
not user-definable.

(LEFT/RIGHT) Move one space to the left/right.
(CTRL-LEFT/RIGHT) Move one word to the left/right.
(UP/DOWN) Move to previous/next line.
(HOME/END) Move to the beginning/end of current line.
(CTRL-HOME/END) Move to first/last line of displayed screen.
(PGUP/PGDN) Previous/next screen.
(CTRL-PGUP/PGDN) First/last screen and line.
(ENTER) Move to beginning of the next line.
(TAB) Jump predefined number of spaces.


STATIC KEY COMMANDS -- continued SEDIT v1.00 pg. -9-
---------------------------------------------------------------------------

CTRL-K

The CTRL-K commands are primarily block commands. They closely follow
the industry standard. These keys are not user-definable.

(CTRL-K B) Mark beginning of block.
(CTRL-K K) Mark end of block.

(CTRL-K H) Hide/unhide block.
(CTRL-K G) Goto beg. of block.

(CTRL-K Y) Delete block.
(CTRL-K C) Copy block.
(CTRL-K V) Move block.

(CTRL-K S) Save file.
(CTRL-K R) Read block.
(CTRL-K W) Write block.

(CTRL-K A) Print all.
(CTRL-K P) Print block.

(CTRL-K M) Set lines per page.
(CTRL-K L) Set left print margin.

(CTRL-K T) Copy block to clipboard.
(CTRL-K F) Copy block from clipboard.

(CTRL-K 1..0) Set bookmark.
(CTRL-Q 1..0) Goto bookmark.


CTRL-Q

The CTRL-Q commands are primarily control commands. They closely
follow the industry standard. These keys are not user-definable.

(CTRL-Q C) Enter Control Code.
(CTRL-Q L) Restore line.
(CTRL-Q Y) Clear to end of line.

(CTRL-Q F) Find string.
(CTRL-Q A) Find and replace.
(CTRL-K 1..0) Set bookmark.
(CTRL-Q 1..0) Goto bookmark.

OTHER KEYS
Below is a list of other keys that are not user-definable.

(INS) Toggle Insert/Overwrite mode.
(DEL) Delete character at cursor.
(BACKSPACE) Delete previous character and backup 1 column.
(ALT-1 to ALT-4) Jump to window number 1 to 4.


HELP SYSTEM/STATUS LINE SEDIT v1.00 pg. -10-
---------------------------------------------------------------------------


HELP SYSTEM

SEDIT contains an on-line, context-sensitive, hyper-text help system.
At any time, you can view a help screen relating to your specific
position in SEDIT by pressing (F1).

The importance of using (F1) throughout the program cannot be
over-emphasized. SEDIT's help system is rich with specific and
detailed information on all aspects of the program. Nearly as much
time went into the help screens as the actual program. Much of this
manual was compiled using information from the help screens.

Presented below is a summary of the valid commands while in the help
system.

(ARROW KEYS) Select a topic by moving the highlight bar with any of the
arrow keys.

(ENTER) View the help screen relating to the highlighted topic.

(ANY LETTER) Jump to the next selection beginning with that letter.

(HOME) Move the highlight bar to the first selection.
(END) Move the highlight bar to the last selection.

(PGUP) Move the highlight bar 1/10 back in the list.
(PGDN) Move the highlight bar 1/10 forward in the list.

(ESC) or (-) Leave the help system and return to program.


STATUS LINE

SEDIT displays a status line on the bottom of the screen. A sample
status line looks like this:

SEDIT | R: 529 | C: 26 | 36% | Buf: 26366 | * | D:\SE\SE.DOC | 1

R: 529 -- Currently active row/line.
C: 26 -- Currently active column.
36% -- Relative percentage through the document.
Buf: 26366 -- Amount of free bytes in buffer.
* -- * if the file has changed since last save.
D:\SE\SE.DOC -- Name of file being edited.
1 -- Active window number.


HOT-KEYS SEDIT v1.00 pg. -11-
---------------------------------------------------------------------------


Hot-Keys are key combinations that are available to you anytime SEDIT
is waiting on a key to be pressed.

Valid Hot-Keys include:

(F1) Context-sensitive help. (see HELP SYSTEM)
(ALT-M) Available memory and other key information.
(ALT-S) Shell to DOS, return to SEDIT by typing EXIT.

Presented below is detailed information on selected Hot-Keys:

(ALT-M) SYSTEM INFORMATION

Key system information is available to you anytime by pressing (ALT-M).
The following information is displayed.

NEAR FREE Amount of free memory on the near heap. This number is
really not useful to you, since you cannot control it.

FAR FREE Amount of free memory that SEDIT and other programs can use.
When you shell to DOS or SEDIT runs other programs, this is
the memory that is used.

NEAR/FAR HEAP Test to check the near/far heap.


(ALT-S) DOS SHELL

Pressing (ALT-S) will allow you to shell to DOS without exiting SEDIT.
This allows you to perform DOS related functions such as formatting
disks, copying files or any other needed activity. When you are
finished just type EXIT and you will immediately return to SEDIT
exactly where you were when you shelled to DOS.

If Swapping is turned Off, SEDIT is left in conventional memory. This
will limit the amount of free memory while in DOS. If you get errors
such as 'Program too big to fit in memory' or 'Out of memory' try
turning Swapping on before shelling to DOS. To change the Swap setting
press (ALT-O) for the Other menu, then press (P) to toggle the setting.
If you want to make the setting permanent, press (V) to saVe the
settings.


FIELD EDITING SEDIT v1.00 pg. -12-
---------------------------------------------------------------------------


When entering certain text information, such as a search key, you may
use the following field editing commands:

(HOME) Move the cursor to the beginning of the line.
(END) Move the cursor to the end of the line.

(LEFT) Move the cursor one space to the left.
(RIGHT) Move the cursor one space to the right.
(CTRL-LEFT) Move the cursor one word to the left.
(CTRL-RIGHT) Move the cursor one word to the right.

(DEL) Delete one character at the cursor.
(BACKSPACE) Move the cursor one space to the left and delete
one character.

(INS) Toggle between the insert and over-type mode. While
in the insert mode the cursor's height will increase and
new characters are inserted by shifting all remaining
text one position to the right of the cursor. Toggling
back to the over-type mode will restore the cursor to
its normal size and characters entered will replace
those at the cursor.

(F5) Convert all the text to upper case.
(F6) Convert all the text to lower case.
(F7) Make the first letter of each word upper case.
(F8) Reverse the character's case at the cursor.

(PGUP) Enter control character (i.e. ALT-027, ALT-007, etc.)
(PGDN) Reverse all changes and continue editing.
(ESC) Reverse all changes and quit.
(ENTER) Accept all changes and quit.

In some instances, the input line will appear with text already in it.
This is either the default or the last entered text. Pressing any
character will erase the line and allow you to enter new text. You may
choose to edit the text by first pressing a control key. A control key
is any valid non-alphanumeric key such as (INS) or (LEFT).


FILE MENU SEDIT v1.00 pg. -13-
---------------------------------------------------------------------------


The pull-down File menu is accessed by pressing (ALT-F, by default).
It provides easy access to most of the disk/file related functions in
SEDIT. The following functions are supported via the menu.

Save File - Save active file.
Save All - Prompt and save all files.
Load New - Load a new file.
Close File - Close active file.
Import - Import another file into the active file.
Export - Export the marked block of text to a file.
Rename - Rename the active.
DOS Shell - Temporarily shell to DOS, Type EXIT to return.
Quit - Close all files and exit SEDIT.

Functions with a key combination displayed can be directly accessed via
the key combination without using the pull-down menu.

SAVE FILE

The Save File command (F2, by default) will save the current/active
file to disk. This is an unconditional save (the file is saved each
time whether or not it needs to be saved).

Whenever a file is changed and is unsaved the status bar will show an
'*' instead of a 'ú' after the "Buf:" field.

SAVE ALL

The Save All command (ALT-F2, by default) will save all changed files
to disk. This is a conditional save (the file is only saved if it has
changed since the last time it was saved).

Whenever a file is changed and is unsaved the status bar will show an
'*' instead of a 'ú' after the "Buf:" field.

LOAD NEW

The Load New command (F3, by default) will display a list of files and
allow you select the desired one to load. Once selected SEDIT will
automatically open a new window and display the file in it. If there is
insufficient memory to load the file or all 4 windows are in use, SEDIT
will abort the operation.


CLOSE FILE

The Close File command (ALT-F3, by default) will close the active file.
If the file has been changed since the last time it was saved, SEDIT
will ask you if you want to save the file before closing it.


FILE MENU -- continued SEDIT v1.00 pg. -14-
---------------------------------------------------------------------------


IMPORT

The Import command (CTRL-Z, by default) will display a list of files
and allow you to select the desired one to import. The selected file
will be combined into the active file beginning where the cursor is
located when the command is issued.


EXPORT

The Export command (CTRL-X, by default) allows you to create a text
file containing whatever is marked in the active file.


RENAME

The Rename command (F4, by default) allows you to rename the active
file. Future saves will use the new name. Note that this does not
affect files previously saved under the old name.


DOS SHELL

This command (ALT-S, by default) allows you to shell to DOS without
exiting SEDIT. You can then perform DOS related functions such as
formatting disks, copying files or any other needed activity. When you
are finished, type EXIT and you will immediately return to SEDIT
exactly where you were when you shelled to DOS.

If Swapping is turned off, SEDIT is left in conventional memory. This
will limit the amount of free memory while in DOS. If you get errors
such as 'Program too big to fit in memory' or 'Out of memory' try
turning Swapping on before shelling to DOS. To change the Swap setting
press (ALT-O) for the Other menu, then press (P) to toggle the setting.
If you want to make the setting permanent, press (V) to saVe the
settings.


QUIT
The Quit command (ALT-X, by default) prompts you to save unsaved files
then exits SEDIT.


EDIT MENU SEDIT v1.00 pg. -15-
---------------------------------------------------------------------------


The pull-down Edit menu is accessed by pressing (ALT-E, by default).
It provides easy access to many editing functions in SEDIT. The
following functions are supported via the menu.

Restore Line - Undo changes to line.
Erase EOL - Erase from cursor position to end-of-line.
Delete Line - Delete current line.
Undelete Line - Resore last deleted line.
Delete Word - Delete word t cursor.
Insert Line - Insert a new line.
Expand TABs - Convert all TAB characters into spaces.
Control Code - Insert control code into text.
Reformat - Reformat current paragraph or quoted text.
Line Draw - Draw lines and boxes using the cursor.


Functions with a key combination displayed can be directly accessed via
the key combination without using the pull-down menu.


RESTORE LINE

The Restore Line command (ALT-U, by default) will undo all the changes
to the active line and restore it to its original state. This command
is only available for the current line. Once you leave a line, SEDIT
is no longer able to reverse your changes.


ERASE EOL

The Erase EOL command (CTRL-E, by default) will delete all characters
from the cursor to the end of the current line.


DELETE LINE

The Delete Line command (CTRL-Y, by default) will delete the current
line and place it in the undelete buffer. You can retrieve a deleted
line with the Undelete Line command.


UNDELETE LINE

The Undelete Line command (CTRL-U, by default) will undelete the last
line deleted or the last line placed in the undelete buffer. Lines are
placed in the undelete buffer with the Delete Line, Delete Block or To
Clipboard commands.


INSERT LINE

The Insert Line command (CTRL-N, by default) will insert a blank line
directly above the cursor.


EDIT MENU -- continued SEDIT v1.00 pg. -16-
---------------------------------------------------------------------------


CONTROL CODE

The Control Code command (CTRL-O, by default) allows you to enter
control codes directly into the file you are editing. The control code
is the ASCII value associated with the particular character you want to
enter. Refer to the ASCII chart included in the on-line help for
specific values.


EXPAND TAB
The Expand TABs command (SHIFT-TAB, by default) will convert all TAB
characters into the proper number of spaces. The number of spaces is
set with the Tab Size command.


DELETE WORD
The Delete Word command (CTRL-T, by default) will delete one word
(consisting of alpha-numeric characters) at the cursor and any
trailing spaces. If the cursor in on a non-alpha-numeric character,
then SEDIT will delete charaters until the next alpha-numeric
character is reached.


REFORMAT PARAGRAPH
The Reformat command (CTRL-CR, by default) reformats the current
paragraph from the cursor position to the paragraph's end. This is
accomplished by wrapping lines longer than the Wordwrap length to the
next line. Indention is preserved during the reformation.


REFORMAT QUOTED TEXT
The Reformat Quote command (CTRL-\, by default) reformats quoted text
from the cursor position to the last quoted line. This is accomplished
by wrapping lines longer than the Wordwrap length to the next line
while leaving the quote characters in place. The number of quote
characters is determined by the cursor position when the command is
issued. If the starting column position is greater than eight or the
character preceding the cursor is alpha-numeric, you are asked to
confirm the command.

EXAMPLE:

JS> To reformat this quote place the cursor on the letter
JS> "T" in the word "To" on the first line and press CTRL-\.


EDIT MENU -- continued SEDIT v1.00 pg. -17-
---------------------------------------------------------------------------


LINE DRAW
The Line Draw command (ALT--, by default) allows you to select a
drawing mode. Once a mode is selected SEDIT will draw lines and boxes
simply by moving the cursor. The following modes are valid:

Off - No lines are drawn, normal edit mode.
Single - All lines use a single frame character.
Double - All lines use a double frame character.
Double Horizontal - Horizontal lines use double frame characters,
vertical lines use single frame characters.
Double Vertical - Vertical lines use double frame characters,
horizontal lines use single frame characters.
Erase - Characters and lines are erased as the cursor
is moved.


WINDOW MENU SEDIT v1.00 pg. -18-
---------------------------------------------------------------------------


The pull-down Window menu is accessed by pressing (ALT-W, by
default). It provides easy access to multi-file windowing functions
in SEDIT. The following functions are supported via the menu.

Zoom/unzoom - Toggle to/from full screen presentation.
Next Window - Jump to the net window.
Toggle Split - Toggle horizontal/vertical split of windows.
Resize - Enlarge or shrink active window.

Functions with a key combination displayed can be directly accessed
via the key combination without using the pull-down menu.


ZOOM/UNZOOM WINDOW

The Zoom/Unzoom command (F5, by default) expands the window to occupy
the full screen (Zoom) or returns it to its normal size (Unzoom),
depending on its current state. When a window is not Zoomed it will
have a border around it.


NEXT WINDOW

The Next Window command (F6, by default) makes the next valid
window/file in the que the active window/file. If no valid
windows/files are found before the end of the que, SEDIT will search
from the beginning of the que up to the current window/file.

(ALT-1 thru ALT-4) will allow you to jump directly to any valid
window/file without having to cycle through all the other
windows/files. For example, if you are editing 4 files at once and the
active file is #3 (see the bottom right hand corner of the status bar)
and you want to go to the 2nd window/file, simply press (ALT-2).


TOGGLE SPLIT

The Toggle Split command (F7, by default) toggles how multiple
files/windows are displayed. They are displayed either horizontally
(on top of each other from top to bottom) or vertically (next to each
other from left to right).


RESIZE WINDOW

The Resize Window command (CTRL-F5, by default) allows you to change
the size of the active window when multiple windows are displayed.

The windows are resized by moving the bottom border up or down for
horizontally displayed windows, and the right border left or right for
vertically displayed windows. Note the adjoining window must have
sufficient room to be expanded into.


LOCATE MENU SEDIT v1.00 pg. -19-
---------------------------------------------------------------------------


The pull-down Locate menu is accessed by pressing (ALT-L, by default).
It provides easy access to search and replace functions in SEDIT. The
following functions are supported via the menu.

Find - Find specified string.
Replace - Find specified string and replace with another.
Next Match - Find next match of previously specified string.
Goto Line - Goto a specified line number.

Functions with a key combination displayed can be directly accessed via
the key combination without using the pull-down menu.


FIND STRING

The Find command (CTRL-F, by default) allows you to search for a
specific string as defined in the "Search For:" field.

"Ignore Case" when toggled to No will only find a match if the case is
the same. For example, "sedit", "Sedit", "SEDIT" are considered
different strings when this field is set to No, but are considered the
same string when this field is set to Yes.

"Range:" determines the scope of the search. "From Cursor" begins the
search at the cursor and continues to the end of the file. "From
Beginning" searches the entire file. "Marked Block" limits the search
to highlighted block.

(SPACEBAR) to toggle options. (TAB) to begin a search. (ESC) Quit.


SEARCH & REPLACE

The Replace command (CTRL-R, by default) searchs for the string defined
in "Search For:" and replaces it with "Replace With:".

"Ignore Case" when toggled to No will only find a match if the case is
the same. For example, "sedit", "Sedit", "SEDIT" are considered
different strings when this field is set to No, but are considered the
same string when this field is set to Yes.

"Range:" determines the scope of the search. "From Cursor" begins the
search at the cursor and continues to the end of the file. "From
Beginning" searches the entire file. "Marked Block" limits the search
to highlighted block.

If the "Prompt:" option is set to No, then all matches are
automatically changed, else you are prompted before each change.

(SPACEBAR) to toggle options. (TAB) to begin a search. (ESC) Quit.


LOCATE MENU -- continued SEDIT v1.00 pg. -20-
---------------------------------------------------------------------------


NEXT MATCH

The Next Match command (CTRL-L, by default) continues a previously
defined search. If no more matches are found a beep will sound.


GOTO LINE

The Goto Line command (CTRL-G, by default) allows you to jump directly
to the specified line.


BLOCK MENU SEDIT v1.00 pg. -21-
---------------------------------------------------------------------------


The pull-down Block menu is accessed by pressing (ALT-B, by default).
It provides access to most of the block related functions in SEDIT.
The following functions are supported via the menu.

Mark Beg. - Begin marking block.
Reset Beg. - Reset the beginning of a marked block.
Mark End - Define the end of a marked block.
Copy - Copy marked block.
Move - Move marked block.
Delete - Delete marked block.
Goto Beg. - Move cursor to beginning of marked block.
Hide/unhide - Hide/unhide marked block.
To Clipboard - Copy marked block to clipboard.
From Clipbd. - Get text from clipboard.

Functions with a key combination displayed can be directly accessed via
the key combination without using the pull-down menu.


MARK BEGINNING OF BLOCK

The Mark Beg. command (F9, by default) sets the current cursor position
as the beginning and end of the block. Until the Mark End command is
issued, the end of the block follows the current cursor position. This
allows you to define a block by simply moving the cursor to where you
want the block to end.


RESET BEGINNING OF BLOCK

The Reset Beg. command (ALT-F9, by default) resets the block's
beginning to the current cursor position. This command allows you to
change the beginning of a marked block. Unlike the Mark Beg. command
the end-of-block marker is not affected.


MARK END BLOCK

The Mark End command (F10, by default) sets the block's end to the
current cursor position. After issuing a Mark End command the block
end setting will no longer follow the current cursor position.


COPY BLOCK

The Copy command (ALT-C, by default) copies the marked block to the
current cursor postition. The copied block is inserted and does not
overwrite existing text.


BLOCK MENU -- continued SEDIT v1.00 pg. -22-
---------------------------------------------------------------------------


MOVE BLOCK

The Move command (ALT-V, by default) copies the marked block to the
current cursor postition, and then deletes the original block. The
moved block is inserted and does not overwrite existing text.


DELETE BLOCK

The Delete Block command (ALT-Y, by default) removes the marked block
from the document and places it in the undelete buffer. It can be
recovered 1 line at a time with the Undelete Line command.


GOTO BEGINNING OF BLOCK

The Goto Beg. command (CTRL-F9, by default) moves the cursor position
to the beginning of the marked block.


HIDE/UNHIDE BLOCK

The Hide/unhide command (ALT-F10, by default) hides or unhides the
marked block, depending the the blocks current state. The block is
hidden by changing its highlighted color to the default text color. It
is unhidden by resetting its color to the highlighted color.


TO CLIPBOARD

The To Clipboard command (ALT-D, by default) copies the highlighted/
marked text to the undelete buffer. It can be retrieved using the From
Clipboard command. This command, along with the From Clipboard
command, is used to move text from one file to another.

FROM CLIPBOARD

The From Clipboard command (ALT-G, by default) copies a previously
saved block of text from the undelete buffer. Text can be saved using
the To Clipboard command. This command, along with the To Clipboard
command, is used to move text from one file to another.


PRINT MENU SEDIT v1.00 pg. -23-
---------------------------------------------------------------------------

The pull-down Prt menu is accessed by pressing (ALT-R, by default). It
provides access to the print functions in SEDIT. The following
functions are supported via the menu.

Print Block - Print only the marked block.
Print All - Print entire file.
Form Feed - Send form-feed to printer.
Left Margin - The number of spaces to indent when printing.
Lines/page - THe number of printed lines per page.
Page Break - Enter a hard page break (decimal char code 012).

Functions with a key combination displayed can be directly accessed via
the key combination without using the pull-down menu.

PRINT BLOCK

The Print Block command (CTRL-B, by default) sends the marked block to
the printer (lpt1). A form feed is not sent after the block.


PRINT ALL

The Print All command (CTRL-D, by default) sends the entire active file
to the printer (lpt1). A form feed is not sent after the file.


FORM FEED

The Form Feed command (which is only accessible via the menus) sends
sends a form feed to the printer (lpt1). A form feed is often needed
after printing a block or file to instruct the printer to eject the
last page.


LEFT MARGIN

The Left Margin command (ALT-I, by default) allows you to define the
number of spaces each line is indented when the file or a block is sent
to a text printer.


LINES PER PRINTED PAGE

The Lines/page command (ALT-H, by default) allows you to define the
number of lines printed on each page.


PAGE BREAK

The Page Break command (CTRL-P, by default) allows you to force a page
break when printing by inserting a form feed character directly into
the text.


MACRO MENU SEDIT v1.00 pg. -24-
---------------------------------------------------------------------------


The pull-down Macro menu is accessed by pressing (CTRL-C, by default).
It provides access to the macro functions in SEDIT. The following
functions are supported via the menu.

Record Macro - Begin/end recording session.
Execute Macro - Execute previously recorded macro.

Functions with a key combination displayed can be directly accessed via
the key combination without using the pull-down menu.


RECORD MACRO

The Record Macro command (CTRL-], by default) allows you to assign a
predefined sequence of keystrokes to a single keystroke.

When the Record Macro command is issued, you are asked to select a key
you want to assign the keystrokes to. Then you are asked to enter a
short description of the macro. The description will appear in the
maCro menu. Once the description is entered, a beep will sound to let
you know the recording has begun. Enter the key sequence as you
normally would. When finished, press the Record Macro command once
again. A series of beeps will acknowledge that the key sequence was
saved.

SEDIT allows up to 10 macros with each storing up to 250 keystrokes.


EXECUTE MACRO

The Execute Macro commands (SHIFT-F1 thru SHIFT-F10, by default) allows
you execute a previously defined macro. To replay the sequence of
keystrokes, press the key to which they were assigned.

SEDIT allows up to 10 macros with each storing up to 250 keystrokes.


SPELL MENU SEDIT v1.00 pg. -25-
---------------------------------------------------------------------------


The pull-down Spell menu is accessed by pressing (ALT-P, by default).
It provides easy access to the spell check functions in SEDIT. The
following functions are supported via the menu.


Check To EOF - Spell Check from current position to end of file.
Check Word - Check word at cursor.
Spell Check - Toggle automatic spell checking On or Off.

Functions with a key combination displayed can be directly accessed via
the key combination without using the pull-down menu.


CHECK TO EOF

The Check To EOF command (CTRL-A, by default) checks the spelling of
the current file, beginning where the cursor is positioned to the
file's end. To terminate the spell check, press (ESC).


CHECK WORD

The Check Word command (ALT-A, by default) checks the spelling of the
word at the cursor. If the word is found in the dictionary, a
distinctive tone will sound, otherwise a list of similar words is
provided for you to select the correct spelling. See also the SELECT
WORD WINDOW section.


AUTO SPELL CHECK

The Spell Check command (which is only accessible via the menus)
toggles the auto checking On or Off. If the auto checking is On, the
words are checked as you type them in. A beep sounds if SEDIT cannot
find the word in the dictionary. You may then either continue typing
or look the word up with the Check Word command. See also the SELECT
WORD WINDOW section.


OTHER MENU SEDIT v1.00 pg. -26-
---------------------------------------------------------------------------


The pull-down Other menu is accessed by pressing (ALT-O, by default).
It provides access to several general functions in SEDIT. The following
functions are supported via the menu.

Help - Online, context sensitive, hyper-text help.
Autoindent - Indent same as previous line.
Strip Spaces - Strip blank spaces at the end of a line.
Insert - Toggle insert/over-write mode.
Word Wrap - Wrap to next line when right margin is reached.
TAB Size - Set number of spaces represented by TAB key.
Swapping - Swap SEDIT out of memory before running program.
DOS Command - Execute DOS command from within SEDIT.
Memory - Display free memory, system date/time, etc.
Save Settings - Save custom settings to active .CFG file.

Functions with a key combination displayed can be directly accessed via
the key combination without using the pull-down menu.


AUTOINDENT

The Autoindent command (which is only accessible via the menus) toggles
the auto indenting On or Off. If the auto indenting is On, the next
line indents the same number of spaces as the previous line when
(ENTER) is pressed or word wrap occurs.


STRIP TRAILING SPACES

The Strip Spaces command (which is only accessible via the menus)
toggles the stripping of trailing spaces On or Off. If strip spaces is
On, any trailing spaces are removed whenever the line is active then
you move to another line.


INSERT

The Insert command (the (INS) key, is NOT user-definable) toggles
between over-write and insert mode. When in the insert mode characters
are inserted by pushing trailing text to the right. While in the

over-write mode characters at the cursor are replaced when a new one is
entered. The cursor is three times larger in the insert mode than when
in the over-write mode.


OTHER MENU -- continued SEDIT v1.00 pg. -27-
---------------------------------------------------------------------------


WORD WRAP

The Word Wrap command (CTRL-W, by default) allows you to define the
column in which word wrap will take place. To disable word wrap set
set this item to 0.

Word wrap is the process of ensuring a maximum length for each line.
Text is automatically moved to the next line when a character is
entered beyond the column defined in this setting. If a line becomes
too long as a result of inserting characters at its beginning, the
line/paragraph is adjusted with the Reformat command.


TAB SIZE

The Tab Size command (ALT-T, by default) allows you to define the width
of the TAB stops. The default setting is eight. Each time (TAB) is
pressed the cursor moves to the next TAB stop (e.g. column 8, 16, 24,
etc).


SWAP SEDIT TO MEMORY OR DISK

When this option is toggled On, SEDIT is moved out of conventional
memory before external programs, including DOS shells, are executed.
This frees more memory for the external program. SEDIT will attempt to
swap itself to high memory first. If there is not enough memory, it
will attempt to swap itself to disk. Toggle this option by pressing
(ENTER).

The advantage to swapping, as stated above, is the increased memory
capacity afforded the external program. However, it will take longer
to execute the program because of the time needed to remove SEDIT from
conventional memory. Disk swaps will take longer than memory swaps.
Therefore, if your applications will run without swapping, it is to
your advantage to leave this option toggled Off.


OTHER MENU -- continued SEDIT v1.00 pg. -28-
---------------------------------------------------------------------------


DOS COMMAND

The DOS Command (F8, by default) allows you to execute a DOS command
without exiting SEDIT. You can perform DOS related functions such as
formatting disks, copying files or any other needed activity. Enter
the command in the prompt window just like you would from a DOS prompt.
When the operation is finished, you are automatically returned to
SEDIT.

If Swapping is turned off, SEDIT is left in conventional memory. This
will limit the amount of free memory while executing the DOS command.
If you get errors such as 'Program too big to fit in memory' or 'Out of
memory' try turning Swapping on before shelling to DOS. To change the
Swap setting press (ALT-O) for the Other menu, then press (P) to toggle
the setting. If you want to make the setting permanent, press (V) to
saVe the settings.


SYSTEM INFORMATION

Key system information is available to you anytime by pressing (ALT-M,
by default). The following information is displayed.

NEAR FREE Amount of free memory on the near heap. This number is
really not useful to you, since you can not control it.

FAR FREE Amount of free memory that SEDIT and other programs can use.
When you shell to DOS or SEDIT runs other programs, this is
the memory that is used.

NEAR HEAP and FAR HEAP are integrity checks for the memory that SEDIT
uses. Also displayed is the system time and date.


SAVE SETTINGS

The Save Settings command (which is only accessible via the menus) will
save the various settings to the file SE.CFG.

It is possible to alter SEDIT's behavior when performing different
types of editing jobs, by placing a customized SE.CFG in different
places where SEDIT is started. Also you can specify a specific
configuration file via the command line. For example:

SE /C=D:\EDIT\SE.CFG

This will start SEDIT and use the configuration file SE.CFG located in
the D:\EDIT directory.


SELECT FILE WINDOW SEDIT v1.00 pg. -29-
---------------------------------------------------------------------------


This window allows you to select a file from a list of files as defined
in the Filespec field. The following keys are vaild:

(TAB) - Jump between the Filespec and Files field.
(SHIFT-TAB) - Jump to Filespec field.
(ESC) - Leave window without selecting a file.
(F9) - Create/load Filespec. (Filespec field).
(ENTER) - Filespec field: Display new file list.
Files field: Select file.
(CTRL-BACKSPACE) - Delete highlighted file (Files field).
(ARROW KEYS) - Move cursor, scroll when necessary (Files field).
(PGDN/PGUP) - Next/previous screen (Files field).
(HOME/END) - Move cursor to first/last item (Files field).

While in the Files section, the highlighted file's name, size,
date and time is displayed above the file list.


SELECT WORD WINDOW SEDIT v1.00 pg. -30-
---------------------------------------------------------------------------

When the spelling checker is unable to find a word in the dictionary, a
window pops up with a list of similar words. The questionable word is
shown as the window's title. The following keys are valid while in
this window:

(ENTER) - Select highlighted word as the correct spelling.
(F10) - Add word to personal list.
(TAB) - Skip the questionable word and continue on. The word will
be automatically skipped each time thereafter.
(ESC) - Leave window and terminate spelling check.

(DOWN/UP) - Move cursor down/up one item.
(PGDN/PGUP) - Next/previous screen.
(HOME/END) - Move cursor to first/last screen.
(CTRL-HOME/END) - Move cursor to first/last displayed item.

To search for a specific word, begin typing the word. Use (BACKSPACE)
if you enter an incorrect letter.


TECHNICAL SUPPORT SEDIT v1.00 pg. -31-
---------------------------------------------------------------------------


Questions or comments about this product should be directed to:

Jim E. Smith Channel 8250
344 Observatory Drive or Conference #42
Birmingham, AL 35206 205-744-8546

Internet: [email protected]

I also monitor several national networks such as ILink, U'NI Net, etc.
You may leave me mail, addressed to JIM SMITH, in the Shareware
Conference of any of these networks.

In addition to the above, registered users are provided with my home
phone number for immediate technical support.



UPGRADE POLICY

- Open-ended promises are easy to make, but difficult to keep. In the
end, the user usually feels cheated.

- I want to offer free updates as long as it is economically feasible and
other circumstances do not preclude it.

- By "economically feasible", I mean, for example, as long as enough new
orders are coming in to cover the cost of continued development.

- By "other circumstances do not preclude it", I mean, for example, if
someone hacks and distributes the key file scheme, it will have to be
changed and new key files mailed out on a subsequent upgrade. In this
example, the registered user would have to pay a small upgrade fee to
cover the postage and handling.

- In addition, all registered users are eligible to beta test the latest
version. This will give the loyal supporters first crack at anything
new, and provide me with an experienced pool of SEDIT users. Betas
versions can be downloaded from:

Channel 8250 (205)-744-8546 conference #25
Lunatic Fringe (214)-235-5288 conference #169
The Matrix (205)-323-2016 300-2400, 14 nodes, conference #372
" " (205)-323-6016 9600+ HST Dual, 4 nodes
" " (205)-458-3449 v.32, 1 node
Mercury Opus (813)-321-3976 300-2400, conference #441
" " (813)-321-0734 9600+ HST/DS


On Channel 8250, leave a comment to the Sysop and request access to the
SPEED/SEDIT beta conference. You may access the SPEED/SEDIT conference
on your first call to the other BBS's. I reserve the right to withdraw
this at any time, with no forewarning.


KUDOS SEDIT v1.00 pg. -32-
---------------------------------------------------------------------------


No successful program is the result of only one person's labor. This
program is no exception. I would like to thank all the people who have
registered SEDIT. If you had not done so, SEDIT would have ceased to
exist. I would like to give a special thanks to the registered users
who chose to help beta test the latest version of SEDIT.

I would like to also recognize the Sysops of Channel 8250, RANDY
HILLIARD and MIKE TYNER; the Sysop of the Lunatic Fringe JOHN STEWART;
and the Sysops of The Matrix ROCKY RAWLINS and ERIC HUNT. They have
willingly given of their time, energies and system resources, to
provide SEDIT a distribution site. Thanks!

SEDIT's original beta team was made up of several registered SPEED READ
users. Though too numerous to list, each of these people have earned a
special heartfelt thanks.

This product uses the SPAWNO routines by Ralf Brown to minimize memory
use while shelling to DOS and running other programs.


LEGAL SEDIT v1.00 pg. -33-
---------------------------------------------------------------------------


LICENSE AGREEMENT

SEDIT (the software) is licensed to you. The author, J.E. Smith,
retains sole ownership of the software.

You may try the shareware version for no more than 30 days, after which
you must either register it or quit using the program. Registered
users may only use the software on one computer at a time. At no time
should more than one copy of software be running on different computers
at the same time.

Registered users are permitted to make a backup copy of the CONFIG.SE
file for their own use in case the original disk becomes defective.
All other copies of this file are prohibited. The CONFIG.SE file
should not be loaned, given away or otherwise used by anyone other than
the licensee.

You may NOT alter, decompile or disassemble the software or any of the
supporting files other than what occurs during the natural use of the
program.

You may NOT assign, sublicense, or transfer the program or any rights
under this License to anyone else. This License Agreement is NOT
transferable, and can only be revoked by the user if he or she destroys
ALL copies of the program.


DISCLAIMER OF ALL WARRANTIES AND LIABILITY

SEDIT IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
OR IMPLIED. YOU ASSUME THE ENTIRE RISK OF USING THE PRODUCT. THE
AUTHOR WILL NOT BE LIABLE FOR, BUT NOT LIMITED TO, DIRECT, INDIRECT,
INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM ANY DEFECT IN, OR USE
OF, THE SOFTWARE.


OTHER

Throughout this document mention is made of other companies' products
and trademarks. This is for reference purposes only. In no way does
the author of SEDIT imply any relationship to these companies or
trademarks. The trademarks mentioned are the property of their
respective owners.