Dec 082017
 
Mitsumi CD-ROM Drivers for Windows NT.

Full Description of File


Windows NT CD-ROM drivers for Mitsumi drives
*** Archive description file (file_id.diz)***
*** created by the authors of BigSky ROMs ***


File NTMITSUM.ZIP from The Programmer’s Corner in
Category Windows NT Files
Mitsumi CD-ROM Drivers for Windows NT.
File Name File Size Zip Size Zip Type
BUSCD.SYS 25600 8159 deflated
FILE_ID.DIZ 141 120 deflated
OEMSETUP.INF 18736 3956 deflated
OEM_DISK 5 5 stored
README.TXT 3853 1954 deflated
REG_FORM.TXT 1289 412 deflated

Download File NTMITSUM.ZIP Here

Contents of the README.TXT file


Windows NT CD-ROM drivers for Mitsumi drives
*** Archive description file (file_id.diz)***
*** created by the authors of BigSky ROMs ***
BUSCD.SYS - A NT-Driver for Mitsumi LU002/LU005


Note Note Note
==============

I am not the manufacturer of your CD Drive - I am only a owner
like you. Consequently I can not guarantee that this driver
will function with every version of the Firmware inside the
CD Drive. But I did my best to test the driver.



This is ShareWare
=================

You are welcome to test the driver for 30 days. After this
time you must either stop using the driver or send the registration
form with the money ($20 or DM 30 + shipping) to

Bernd Edlinger
Riesstrasse 67/VI

80997 Muenchen
Germany


This version of the driver has a built in time limit of 30 days.
Registered users will receive an unlimited version.



Installing the Driver
=====================

1. Copy these files to a Diskette.

2. Run Setup from the Administrator-Account.

3. Install a new SCSI-Driver (Select OTHER)

4. If the IO-Address of the bus adapter is 0x300
You can reboot the machine now.

5. Otherwise start REGEDT32.EXE

6. Setup should have created the following registry key:

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\BusCd


The following entries must be created (others may exist too):

ErrorControl:REG_DWORD:0x1
Group:REG_SZ:SCSI CDROM Class
Start:REG_DWORD:0x1
Type:REG_DWORD:0x1

7. If your bus adapter has an address other than 0x300
create a new key "Parameters" under the "BusCd" key
and add a new value "BaseAddress" of type REG_DWORD
and the base address as it is jumpered on the adapter.

Example:
...\BusCd\Parameters:
BaseAddress:REG_DWORD:0x310

8. Restart your machine.

9. If something unpleasant happens during the system boot
the Last Known Good Configuration can be selected by pressing
the space bar after the "Ntdetect checking hardware..." message.



Incompatibilities
=================

This driver is not suitable for system-boot. There is still no
other way than to use winnt. This is because this driver is
(in its current version) no scsi-miniport.


There may exist problems if this driver is used on systems with
a second SCSI-II CD-Drive. I have not tested this!


The cdaudio filter-driver produces some error-logs when it
tries to send INTERNAL_DEVICE_CONTROLs to the buscd.sys.
This is harmless, but you can disable the cdaudio device
by klicking on the control panel icon "Devices" (not Drivers!)
and changing the startup of cdaudio to disabled. This has
nothing to do with the MCI CD Audio driver in the drivers
section - do not deinstall this one.
The cdaudio is only useful when a NEC, PIONEER DRM6XX,
DENON DRD 25X or HITACHI 1750S/1650S/3650 is installed in
the system.



File-List
=========

buscd.sys- the driver
oemsetup.inf- install file
oem_disk- tag file
readme.txt- description
reg_form.txt- registration


DISCLAIMER

THIS SOFTWARE AND THE ACCOMPANYING FILES ARE PROVIDED "AS IS" WITHOUT
REPRESENTATION OR WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED,
INCLUDING WITHOUT LIMITATION, ANY REPRESENTATIONS OR ENDORSEMENTS
REGARDING THE USE OF, THE RESULTS OF, OR PERFORMANCE OF THE INFORMATION,
ITS APPROPRIATENESS, ACCURACY, OR RELIABILITY. THE ENTIRE RISK AS TO THE
USE OF THIS INFORMATION IS ASSUMED BY THE USER. IN NO EVENT WILL THE
AUTHOR OF THIS SOFTWARE BE LIABLE FOR ANY DAMAGES, DIRECT, INDIRECT,
INCIDENTAL OR CONSEQUENTIAL, RESULTING FROM ANY DEFECT IN THE INFORMATION,
EVEN IF THE AUTHOR OF THIS SOFTWARE HAS BEEN ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES. THIS DISCLAIMER SHALL SUPERSEDE ANY VERBAL OR WRITTEN STATEMENT
TO THE CONTRARY. IF YOU DO NOT ACCEPT THESE TERMS YOU MUST CEASE USING
THIS PRODUCT.



Good Luck.


Bernd Edlinger 100273,334


 December 8, 2017  Add comments

Leave a Reply