Category : Windows 3.X Files
Archive   : WINLJ3.ZIP
Filename : README.386

 
Output of file : README.386 contained in archive : WINLJ3.ZIP
**************************************************************************
**************************************************************************
README FILE FOR HPPCL5A PRINTER DRIVER VERSION 30.3.86
**************************************************************************
**************************************************************************

This README file contains the following information:
* Installation Instructions * New Features * HPPCL5A Printer
Driver Enhancements * User Hints * HP Personal Peripherals
Assist Line

**************************************************************************
INFORMATION PROVIDED IN THIS DOCUMENT AND ANY SOFTWARE THAT MAY ACCOMPANY
THIS DOCUMENT (collectively referred to as the HPPCL5A Printer Driver
Version 30.3.86) IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER
EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES
OF MERCHANTABILITY AND/OR FITNESS FOR A PARTICULAR PURPOSE. The user
assumes the entire risk as to the accuracy and the use of the HPPCL5A
Printer Driver Version 30.3.86.

The HPPCL5A Printer Driver Version 30.3.86 may be copied and distributed
subject to the following conditions:

1) All text must be copied without modification and all pages must be
included;
2) All files on the disk must be copied without modification (the DOS
utility DISKCOPY is appropriate for this purpose);
3) All components of the HPPCL5A Printer Driver Version 30.3.86 must be
distributed together; and
4) the HPPCL5A Printer Driver Version 30.3.86 may not be distributed for
profit.

Copyright (c) 1990, 1991 Hewlett-Packard Company. All Rights Reserved.
Univers is a product of; and Intellifont is a registered trademark of AGFA
Compugraphic, a division of Agfa Corporation. Windows is a registered
trademark of Microsoft Corporation.


**************************************************************************
INSTALLATION INSTRUCTIONS
**************************************************************************

To install the HPPCL5A Printer Driver:

Part 1:
1. Delete your font summary file. The font information for this version
of the driver has changed, therefore, it is necessary to delete the
font summary file. Note: the font summary file is usually located in
the Windows directory and the nomenclature is FS5LPT1.PCL (where LPT1
represents the port name). You will have a different font summary file
for every port installed and need to delete all occurrences of the font
summary file. If the font summary file does not appear in the Windows
directory it can be located by looking in the win.ini file under the
heading FontSummary=.


Part 2:
1. Start Windows 3.0.

2. Choose Control Panel from the Main Group in Program Manager. The
Control Panel window appears.

3. Choose the Printers icon from the Control Panel window. The Printers
dialog box appears.

4. Choose the Add Printer >> button.

5. From the List of Printers: dialog box, select the Unlisted Printer.
Unlisted Printer is the last entry in the List of Printers dialog box.

6. Choose Install.

7. Insert the HPPCL5A Printer Driver Disk Version 30.3.86.

8. Double click on the installation drive in the "Directories:" list.

9. Double click on HPPCL5A.DRV in the Driver Files list.

10. Choose "New" when asked whether you want to use the current driver or
install a new driver.

11. The entry "HP LaserJet III on None, Inactive" will appear in the
Installed Printers dialog box.

12. Choose Configure.

13. Highlight the correct printer port from the Ports dialog box.

14. Choose Setup.

15. Make any necessary changes in the Printer Setup window to reflect your
printer's configuration.

16. Choose OK twice.

17. Choose Active.

18. Choose OK.

The HPPCL5A printer driver is now installed.

NOTE: Any HP LaserJet III printer you have previously installed will use
the new PCL 5 Printer Driver and Hewlett-Packard Font Installer. Remove
through the Control Panel any HP LaserJet III printer entries that are not
needed.

To remove a printer from the Installed Printers List:

1. Choose Control Panel from the Main Group in Program Manager.

2. Choose the Printers icon from the Control Panel window. The Printers
dialog box appears.

3. Highlight the printer you want to remove.

4. Choose Configure.

5. Choose Remove.

6. Choose Yes when asked if you want to remove the printer.

7. Choose OK twice to return to the Control Panel.

Until you exit Windows 3.0 and then restart Windows 3.0, the Printer Setup
function from the Control Panel is accessed from the installation disk.
Make sure the installation disk for HPPCL5A Printer Driver Version 30.3.86
is inserted in the floppy drive whenever you request Printer Setup from the
Control Panel after installing the new Printer Driver and before exiting
Windows 3.0.


**************************************************************************
HPPCL5A PRINTER DRIVER SUPPORT CHANGES
**************************************************************************

The WordPerfect Bitmap Cartridge support has been removed from the 30.3.86
driver. The WordPerfect Cartridge can be added to the font installer by
using either the AutoFont support disk packaged with the cartridge or by
obtaining AutoFont support from the Personal Peripherals Assistance Line.


**************************************************************************
USER HINTS
**************************************************************************

On-line help files are included for the HPPCL5A printer driver and the HP
font installer screens. Choose Help from these screens to access the HELP
information.


**************************************************************************
HEWLETT-PACKARD PERSONAL PERIPHERALS ASSIST LINE
(USA and Canada only)
**************************************************************************

You can call the Hewlett-Packard Personal Peripherals Assist Line weekdays
between 7 a.m. and 6 p.m. (Mountain Standard Time), except for Wednesday
when the hours are 7 a.m. to 4 p.m.: (208) 323-2551. In Europe, call the
Microsoft Customer Support line in your country.


  3 Responses to “Category : Windows 3.X Files
Archive   : WINLJ3.ZIP
Filename : README.386

  1. Very nice! Thank you for this wonderful archive. I wonder why I found it only now. Long live the BBS file archives!

  2. This is so awesome! 😀 I’d be cool if you could download an entire archive of this at once, though.

  3. But one thing that puzzles me is the “mtswslnkmcjklsdlsbdmMICROSOFT” string. There is an article about it here. It is definitely worth a read: http://www.os2museum.com/wp/mtswslnk/