Dec 142017
 
ATI Windows 3.1 1024x768 Crystal Font Driver July 15, 1992 release from ATI Technologies Inc. This driver supports both Crystal Fonts and Microsoft TrueType Fonts, and is compatible with Adobe Type Manager (ATM).
File WIN31XTL.ZIP from The Programmer’s Corner in
Category Windows 3.X Files
ATI Windows 3.1 1024×768 Crystal Font Driver July 15, 1992 release from ATI Technologies Inc. This driver supports both Crystal Fonts and Microsoft TrueType Fonts, and is compatible with Adobe Type Manager (ATM).
File Name File Size Zip Size Zip Type
GSTUNE31.EXE 8960 8787 deflated
INSTALL.BAT 5208 1250 deflated
README.1ST 2504 889 deflated
XTAL31.EXE 132887 132758 deflated

Download File WIN31XTL.ZIP Here

Contents of the README.1ST file



ATI Technologies Online README.1ST July 16, 1992
-------------------------------------------------


Introduction
------------

The files in this archive contain the new Windows 3.1 Crystal Font driver
and the GSTUNE Crystal Tune utility. Read ALL the readme files to be sure
to properly install the Crystal Font driver.


Easy Installation
-----------------

1) Prepare a blank floppy diskette. This can be a 360K disk or better.

2) Run the INSTALL.BAT batch file specifying the drive to which to extract
the drivers and the path to your Windows directory.

Examples:

a) Extract drivers to A: drive and use C:\WINDOWS as Windows directory:

INSTALL A: C:\WINDOWS

b) Extract drivers to B: drive and use C:\WIN31 as Windows directory:

INSTALL B: C:\WIN31

IMPORTANT: The Crystal Font driver must be extracted to a floppy disk!

3) Read README.TXT that is located on the floppy disk.
Read GSTUNE.TXT which is located in your Windows directory.


IMPORTANT: READ BOTH TEXT FILES! (README.TXT and GSTUNE.TXT) FAILURE
TO DO SO WILL RESULT IN THE DRIVER NOT WORKING


Manual Installation
-------------------

The following instructions are for use only if you have difficulty using
the easy installation.

1) Run XTAL31.EXE with the following syntax:

For A: drive: XTAL31 /EA:
For B: drive: XTAL31 /EB:

IMPORTANT: You must extract this file to a floppy for the Crystal Font
driver to correctly install into Windows.

2) Run GSTUNE31.EXE with the following syntax:

GSTUNE31 /EC:\WINDOWS

NOTE: If your Windows directory is not C:\WINDOWS, then specify
that path you are using (ie. C:\WIN).

3) See step 3 in Easy Installation.



IMPORTANT: READ BOTH TEXT FILES! (README.TXT and GSTUNE.TXT) FAILURE
TO DO SO WILL RESULT IN THE DRIVER NOT WORKING


If you have difficulties or have any questions, please feel free to call
ATI Customer Support for assistance.

ATI Customer Support: (416) 756-0711 9am-5:30pm EST
FAX: (416) 756-0720



 December 14, 2017  Add comments

Leave a Reply