Dec 142017
 
Summa Sketch Tablet Windows Drivers ONLY / Update and fixes conflict with all sound boards. From Summa Graphics BBS.
File SUMMAWIN.ZIP from The Programmer’s Corner in
Category Windows 3.X Files
Summa Sketch Tablet Windows Drivers ONLY / Update and fixes conflict with all sound boards. From Summa Graphics BBS.
File Name File Size Zip Size Zip Type
DISK.ID 55 54 deflated
README.DOC 2704 1072 deflated
WINDVR 0 0 stored
ERROR.COM 1439 710 deflated
INSTALL.DAT 17301 3535 deflated
INSTALL.EXE 81511 80092 deflated
MWTSUMG.DRV 24944 12024 deflated
MWTSUMM.DRV 24320 11792 deflated
OEMSETUP.INF 251 153 deflated
ONCOM1.BAT 89 58 deflated
ONCOM2.BAT 89 58 deflated
ONCOM3.BAT 70 45 deflated
ONCOM4.BAT 70 45 deflated
README.TXT 4786 1897 deflated
SUMMA.EXE 37456 18271 deflated
TABPORT1.TXT 30 29 deflated
TABPORT2.TXT 30 29 deflated
TABPORT3.TXT 30 29 deflated
TABPORT4.TXT 30 29 deflated
VSERMD.386 13944 5872 deflated
WINTAB.DLL 82576 33139 deflated
WINTAB.INI 226 111 deflated

Download File SUMMAWIN.ZIP Here

Contents of the README.TXT file


README.TXT


*** Summagraphics Windows Driver (WinTab-compliant) Installation (for
complete installation instructions, see the Drivers/Utilities
User's Guide):

Windows must be installed on your system before you can install the
Summagraphics Windows driver. If Windows is not installed on your
system, follow the installation procedures in your Windows manual.

The Windows driver requires 250 kilobytes of free hard disk space.
Before installing the driver, check for free disk space by issuing
the "DIR" command on the target drive. DOS will respond with
"nnnn bytes free". If there is insufficient disk space, remove or
move enough enough files to accomodate the driver, then run the
install program.

1. Insert the SummaSketch Drivers/Utilities diskette into your A: drive.
At the DOS prompt, type the following:

A: [ENTER]

2. Change to the WINDVR directory by typing the following:

CD \WINDVR [ENTER]

3. Next, run the INSTALL program by typing the following:

INSTALL [ENTER]

The INSTALL program installs the Summagraphics Windows driver and the
SUMMA.EXE control panel program onto your computer. The INSTALL program
prompts you for the following information:

* the hard drive where Windows is installed
* the name of the Windows directory
* whether you want to save (by renaming) the previous version
of the drivers or remove them
* the COM port to which the digitizer tablet is connected

INSTALL then creates a subdirectory called "SUMMA" under the Windows
directory, copies the drivers, and starts the Windows SETUP program.

4. In the Windows SETUP program, at the System Information screen,
use the up/down arrow keys to highlight the "MOUSE" line and press
[ENTER].

5. Use the up/down arrow keys to select "Other (Requires disk provided
by a hardware manufacturer)" and press [ENTER].

6. When SETUP prompts you for the location of the drivers, type the full
pathname of the "SUMMA" subdirectory under your Windows directory; eg,

C:\WINDOWS\SUMMA [ENTER]

Choose either the SummaSketch driver or the Microgrid driver from the
displayed list by pressing ENTER.

Note: Some Windows 3.0 installations may experience an anomaly with
the Windows setup program. After entering the pathname to the "Summa"
directory, the Windows setup program may respond with a second prompt
for the location to the driver and an erroneous pathname.
Example: C:\WINDOWS\SUMMA\\SUMMA
To continue, simply backspace over the erroneous pathname and re-
enter the proper pathname.
Example: C:\WINDOWS\SUMMA
The Windows Setup program may respond again the erroneous prompt.
Enter the pathname one more time and the Windows Setup program will
accept the pathname.

7. At the System Information screen, confirm that the correct driver is
shown on the "MOUSE" line. Then, use the up/down arrow keys to
highlight "Accept The Configuration Shown Above" and press [ENTER].

NOTE: IF YOU ARE RE-INSTALLING THE DRIVER, AN ANOMALY WITH THE
WINDOWS 3.1 SETUP PROGRAM MAY OCCUR. AFTER SELECTING THE REQUIRED
DRIVER, THE SETUP PRORAM WILL PROMPT YOU AGAIN FOR THE LOCATION OF
THE DRIVER. TO CONTINUE, SIMPLY RE-ENTER THE DRIVER PATHNAME.

EXAMPLE: C:\WINDOWS\SUMMA [ENTER]

8. Install the Summagraphics Control Panel Icon in one of the program
manager groups so that it is easily accessible. To install the icon:

a. Run Windows.
b. Double-click on the Program Manager icon (if necessary).
c. Double-click on the Main group icon (if necessary).
d. Click on the program manager's FILE pull-down menu and
select NEW.
e. In the "New Program Object" panel, click on "Program Item,"
then click on OK.
f. In the "Program Item Properties" panel, type SUMMA in the
"Description" box. TAB to the "Command Line" box and type,
for example, C:\WINDOWS\SUMMA.EXE. Click on OK.

The SUMMA icon should appear in the current group's window. If
desired, it may be dragged to a different group's window.

9. If you wish to switch from the UIOF format driver to the MM format driver,
or vice versa, quit Windows, change to the Windows directory at the DOS
prompt, type SETUP, press ENTER, and select the appropriate driver from
the displayed list of mouse devices. When Setup prompts "Accept the
configuration shown above," check that the desired driver is shown on
the Mouse line and press ENTER to accept the configuration.

************************** 87-1020-007 **************************************


Contents of the README.DOC file


README.TXT


*** Summagraphics Windows Driver (WinTab-compliant) Installation (for
complete installation instructions, see the Drivers/Utilities
User's Guide):

Windows must be installed on your system before you can install the
Summagraphics Windows driver. If Windows is not installed on your
system, follow the installation procedures in your Windows manual.

The Windows driver requires 250 kilobytes of free hard disk space.
Before installing the driver, check for free disk space by issuing
the "DIR" command on the target drive. DOS will respond with
"nnnn bytes free". If there is insufficient disk space, remove or
move enough enough files to accomodate the driver, then run the
install program.

1. Insert the SummaSketch Drivers/Utilities diskette into your A: drive.
At the DOS prompt, type the following:

A: [ENTER]

2. Change to the WINDVR directory by typing the following:

CD \WINDVR [ENTER]

3. Next, run the INSTALL program by typing the following:

INSTALL [ENTER]

The INSTALL program installs the Summagraphics Windows driver and the
SUMMA.EXE control panel program onto your computer. The INSTALL program
prompts you for the following information:

* the hard drive where Windows is installed
* the name of the Windows directory
* whether you want to save (by renaming) the previous version
of the drivers or remove them
* the COM port to which the digitizer tablet is connected

INSTALL then creates a subdirectory called "SUMMA" under the Windows
directory, copies the drivers, and starts the Windows SETUP program.

4. In the Windows SETUP program, at the System Information screen,
use the up/down arrow keys to highlight the "MOUSE" line and press
[ENTER].

5. Use the up/down arrow keys to select "Other (Requires disk provided
by a hardware manufacturer)" and press [ENTER].

6. When SETUP prompts you for the location of the drivers, type the full
pathname of the "SUMMA" subdirectory under your Windows directory; eg,

C:\WINDOWS\SUMMA [ENTER]

Choose either the SummaSketch driver or the Microgrid driver from the
displayed list by pressing ENTER.

Note: Some Windows 3.0 installations may experience an anomaly with
the Windows setup program. After entering the pathname to the "Summa"
directory, the Windows setup program may respond with a second prompt
for the location to the driver and an erroneous pathname.
Example: C:\WINDOWS\SUMMA\\SUMMA
To continue, simply backspace over the erroneous pathname and re-
enter the proper pathname.
Example: C:\WINDOWS\SUMMA
The Windows Setup program may respond again the erroneous prompt.
Enter the pathname one more time and the Windows Setup program will
accept the pathname.

7. At the System Information screen, confirm that the correct driver is
shown on the "MOUSE" line. Then, use the up/down arrow keys to
highlight "Accept The Configuration Shown Above" and press [ENTER].

NOTE: IF YOU ARE RE-INSTALLING THE DRIVER, AN ANOMALY WITH THE
WINDOWS 3.1 SETUP PROGRAM MAY OCCUR. AFTER SELECTING THE REQUIRED
DRIVER, THE SETUP PRORAM WILL PROMPT YOU AGAIN FOR THE LOCATION OF
THE DRIVER. TO CONTINUE, SIMPLY RE-ENTER THE DRIVER PATHNAME.

EXAMPLE: C:\WINDOWS\SUMMA [ENTER]

8. Install the Summagraphics Control Panel Icon in one of the program
manager groups so that it is easily accessible. To install the icon:

a. Run Windows.
b. Double-click on the Program Manager icon (if necessary).
c. Double-click on the Main group icon (if necessary).
d. Click on the program manager's FILE pull-down menu and
select NEW.
e. In the "New Program Object" panel, click on "Program Item,"
then click on OK.
f. In the "Program Item Properties" panel, type SUMMA in the
"Description" box. TAB to the "Command Line" box and type,
for example, C:\WINDOWS\SUMMA.EXE. Click on OK.

The SUMMA icon should appear in the current group's window. If
desired, it may be dragged to a different group's window.

9. If you wish to switch from the UIOF format driver to the MM format driver,
or vice versa, quit Windows, change to the Windows directory at the DOS
prompt, type SETUP, press ENTER, and select the appropriate driver from
the displayed list of mouse devices. When Setup prompts "Accept the
configuration shown above," check that the desired driver is shown on
the Mouse line and press ENTER to accept the configuration.

************************** 87-1020-007 **************************************
On this disk you will find four directories, each with softwareutilities
or drivers, and document file(s). The directories are:


ADIDVR - Contains real- and protected-mode ADI drivers for AutoDesk, Inc.,
applications. Use these ADI drivers instead of the internal
drivers provided by AutoDesk. Summagraphics ADI drivers allow
you to switch between AutoDesk, Microsoft(R) Windows(R),
and DOS mouse applications without driver conflict. When
configuring for the pointing device in AutoDesk applications,
be sure to specify "ADI" or "Protected Mode ADI."

TABLTDVR - Contains the tablet driver/mouse emulators TABLET.COM and
TABLETMG.COM. Use one of these drivers when you have an
application which supports Microsoft(R)'s MOUSE.COM.

WINDVR - Contains an INSTALL program, WinTab compliant drivers, virtual port
managers, and related files necessary to use Microsoft(R) Windows
with a SummaSketch tablet.

UTILITY - Contains the following utilities for your Summagraphics tablet.

MMRST.COM - resets tablet with a four-button cursor (MM format)
UIOFRST.COM - resets tablet with a 16-button cursor (UIOF format)
MM.COM - configures tablet for MM format
UIOF.COM - configures tablet for UIOF format
MMTEST.COM - tablet test utility
SEND.COM - sends commands to tablet

****************************************************************************

NOTE:
The installation program used to install Summagraphics Windows
drivers, INSTALL, is based on licensed software provided by
Knowledge Dynamics Corporation, P.O. Box 1558, Canyon Lake, Texas
78130-1558 (USA). INSTALL is Copyright (c) 1987-1992 by
Knowledge Dynamics Corporation which reserves all copyright
protection worldwide. INSTALL is provided to you for the exclusive
purposeof installing Summagraphics Windows drivers. Summagraphics
Corporation has made modifications to the software as provided
by Knowledge Dynamics Corporation, and thus the performance and
behavior of the INSTALL program shipped with the SummaSketch Drivers
and Utilities Disk may not represent the performance and behavior of
INSTALL as shipped by Knowledge Dynamics Corporation. Summagraphics
Corporation is exclusively responsible for the support of the
SummaSketch Drivers and Utilities Disk, including support during the
installation phase. In no event will Knowledge Dynamics Corporation
be able to provide any technical support for the SummaSketch Drivers
and Utilities Disk.

***************************** 87-1000-010 ***********************************



 December 14, 2017  Add comments

Leave a Reply