Dec 052017
 
Several files (some text, some WinWord format) related to the 5.0 release of PACKRAT.
File PCKRT5_A.ZIP from The Programmer’s Corner in
Category Windows 3.X Files
Several files (some text, some WinWord format) related to the 5.0 release of PACKRAT.
File Name File Size Zip Size Zip Type
COMPRE.TXT 2164 963 deflated
CONVER.DOC 4876 1867 deflated
FILTER.EXE 43810 41449 deflated
FORMED.EXE 59352 57766 deflated
PERFOR.TXT 3728 1672 deflated
QAPR50.TXT 3907 1577 deflated
REPORT.EXE 90631 84953 deflated
TN5001.TXT 3376 1570 deflated
TN5002.TXT 2510 1149 deflated
TN5003.TXT 2611 1171 deflated

Download File PCKRT5_A.ZIP Here

Contents of the COMPRE.TXT file


USERS OF DATA COMPRESSION UTILITIES

ISSUE: The storage of temporary files on a compressed drive. PackRat like many
applications generates temporary files to work with. PackRat temporary files
typically use about 500kb of disk space or less.

SOLUTION: To insure smooth system operation when installing and running
PackRat we suggest that you direct the storage of all temporary files to a
directory on an uncompressed drive.

PROCESS: The storage of temporary files on an uncompressed drive can readily
be accomplished by 1) creating a TEMP directory on an uncompressed drive and
2) using a text editor modify the SET TEMP line in the AUTOEXEC.BAT file to
direct TEMP files to the uncompressed drive.

CONCERNS:

1. Typically the storage location of temporary files is directed by a line in the
AUTOEXEC.BAT file. This line will look like: SET TEMP=. What follows the equal
sign could be: C:\DOS, C:\WINDOWS\TEMP, C:\TEMP, or any directory
designated to hold the files created for temporary use by an application.

2. As you will note in item 1 above the temporary files are more times then not
directed to the compressed drive. Experience has shown that system
performance can be impacted when applications are not shut down properly, i.e.
a loss of power, system lockup, reboot with applications open, or any number of
reasons, the temporary files are not properly closed and deleted and thus remain
in the file system.

3. When data compression utilities such as Doublespace, SpeedStor, or Stacker
are installed using the default parameters the uncompressed portion of the drive
will typically be about 1MB in size. The container file for the compressed data will
normally cover the rest of the drive.

4. When using a system with a data compression utility installed a worst case
scenario would be to have the compressed drive become WRITE PROTECTED
or to have the data become INACCESSIBLE. Now you have to deal with the
compressed drive problem before proceeding with your work or play. This is the
type of problem can be eliminated by storing the temporary files on an
uncompressed drive.



 December 5, 2017  Add comments

Leave a Reply