Dec 052017
Clock for windows that resides on the status bar.
File BRCLK132.ZIP from The Programmer’s Corner in
Category Windows 3.X Files
Clock for windows that resides on the status bar.
File Name File Size Zip Size Zip Type
BARCLOCK.EXE 25616 8924 deflated
CHANGES.TXT 6987 2775 deflated
CLOCKDLL.DLL 2688 1269 deflated
README.TXT 10572 3974 deflated
REGISTER.TXT 955 408 deflated

Download File BRCLK132.ZIP Here

Contents of the README.TXT file

BarClock(tm) v1.32

Copyright 1993 by Patrick Breen - All rights reserved.

Archive Contents:

README.TXT - this file
CHANGES.TXT - revision history of BarClock
BARCLOCK.EXE - BarClock executable
CLOCKDLL.DLL - BarClock support DLL
REGISTER.TXT - Registration for BarClock


BarClock (formerly WinClock) is a utility that displays
useful information in the caption bar of the active window.
This approach is somewhat less obtrusive than having the
information in a window which is always on top or that can
be covered by other windows.

System Requirements:

BarClock is completely self-contained and is compatable with
both Windows 3.0 and Windows 3.1. BarClock uses very
little memory (about 12 k) and uses almost 0 system


Since you are reading this, I assume that you have unzipped
the BarClock archive. The rest of the installation is very
easy. Create a new program manager item for BarClock. Make
sure CLOCKDLL.DLL is in the working directory or put it in
your Windows directory. Double-click to start BarClock. I
prefer to add the program item to the Startup group in
Windows 3.1. This causes BarClock to launch every time I
start Windows. Another way to cause BarClock to launch
every time Windows is started is to add the following line
to your win.ini file:


This works for Windows 3.0 and 3.1.

Replacing a prior version:

If you have been using an older version of this program, it
is very important that you replace the old "clockdll.dll"
with the new "clockdll.dll" (the proper clockdll.dll has the
same date as the BarClock.exe you wish to run). The different
versions of the .dll are not compatable with one another.


Once BarClock is running, information will appear in the
caption bar of the active window. Initially, BarClock
displays the date on the left of the bar and the time on
the right. A short click on either the time or the date
will toggle the display of free memory. Another short
click will display the percentage of free resources
available. One more click will display the disk space
available on drive C. Click and hold the mouse button to
display a menu. The menu commands are as follows:

The setup dialog is used to specify how the information
is displayed. The large group of radio buttons is used
to control where each of the items appears. An item
can either appear on the left or right of the caption
bar or it can be toggled into view. If more than one
item is specified for the left or right, they are
combined and displayed together. If more than one item
is set to toggled, the first short click displays the
first toggled item, a click on this item displays the
next item, etc. In addition, an item can be turned off
which prevents it from being displayed at any time. (If
all items are turned off or all are set to toggle, the
time will continue to display so the menu can be

In addition this dialog is used to set the time format
and date format. The clock can be 24-hour and optionally
display seconds. The date format can be chosen from the
set of formats displayed.

Provides the current version number and tells you where
you can reach me.

Removes BarClock and quits the application.

Advanced Options:

I have added the following advanced options (translation -
there is no UI to set them!) to modify the behavior of
BarClock. All of these options are controlled by adding
(or changing) lines in the BarClock.INI file which can be
found in your Windows directory. Future versions of
BarClock will add dialogs that can be used to set these
options directly!

Chimes - (General)

BarClock can play a sound on the hour, on the half hour,
on the quarter hour (15 and 45 past) or any combination
of the three. If you have MMSYSTEM.DLL and an appropriate
sound driver installed, you can specify a .wav file to play.
If you do not have MMSYSTEM.DLL or a sound driver, BarClock
will simply beep.

Wave files can be found in a number of places. In the
future, I hope to distribute a .wav or two with the clock
as the default chimes. If you have access Borland C++ v3.1,
one of the examples comes with a file called "sounder.wav"
which is the perfect hourly chime!

NOTE: Microsoft has a sound driver available that let's you
play .wav files using the internal speaker - the quality is
not great but it works! I beleive the file is called
"speak.exe" and should be available in a number of places.
If you can't find it, drop me a line and I'll point you in
the right direction.


Specifies name of .wav file to play on the hour. If
the name is "none" no chime will occur on the hour.


Specifies name of .wav file to play on the half hour.
If the name is "none" no chime will occur on the half


Specifies name of .wav file to play on the quarter
hour. If the name is "none" no chime will occur on
the quarter hour.

Date0 - Date4=

These are the 5 date formats. The syntax for the date
formats is identical to what Windows uses in its control
panel. Here is a brief summary of the keywords:

m- Month (1-12)
mm- Month (01-12)
mmm- Month (Jan - Dec)
mmmm- Month (January - December)
d- Day (1-31)
dd- Day (01-31)
ddd- Day (Mon-Sun)
dddd - Day (Monday-Sunday)
yy- Year (00-99)
yyyy - Year (1900-2040)

All months and days are stored in a string table. They
can be modified with any resource editor.


This specifies the format string for the resource
display. The key words are "upct" and "gpct" which
stand for the percent of the User heap which is
available and the percent of the GDI heap which is
available. These heaps are shared by all applications
and when they run dry, it is necessary to quit one
or more applications before work can continue. The
minimum of the two values is often refered to as
"System Resources" and is the value that can be found
in the Progam Manager's About dialog.


This specifies the format string for the free disk
space. The key words are "drive" which expands to the
drive letter and "fdisk" which expands to the amount
of free space on that drive.


This specifies the format string for the free memory.
The key word "fmem" expands to the amount of free
memory that is currently available. This amount
includes virtual memory.


This determines whether the BarClock window appears
if the clock cannot find a home. By default, the window
does appear and this value is set to 1. To keep the
window from appearing, change this value to a 0.


This determines whether BarClock uses the system colors
to draw the text or a custom color that from this .INI
file. By default, BarClock uses the system colors and
this value is set to 1. To specify a custom text color,
change this value to a 0 and specify the color by adding
the following lines to the .INI file:

TextColorR=(red component of text color)
TextColorG=(green component of text color)
TextColorB=(blue component of text color)


This determines whether BarClock uses the system
background color underneath a custom text color. This
option is only meaningful if SystemColors is set to 0.
By default, this value is set to 1 which causes the clock
to be drawn on top of the appropriate caption color. To
specify a custom background color, set SystemColors to 0
(and specify a text color - see above), change this value
to a 0 and specify the color by adding the following
lines to the .INI file:

BackColorR=(red component of background color)
BackColorG=(green component of background color)
BackColorB=(blue component of background color)


This determines whether BarClock invalidates the desktop
window to remove "ghost" clocks in Windows 3.0. For
machines that are running Windows 3.0, this option will
eliminate the redraw that occurs when switching between
applications. By default, BarClock does invalidate and
this value is set to 1. This option has no effect if
you are using Windows 3.1.


These two values specify how much room BarClock should
leave between the string it draws and the standard
system controls. These can be useful if you are using
other utilities that want to put controls in the title
bar. By default, both values are set to 0.


If this option is a 1, the free memory and disk space
are always displayed in kilobytes. If this option is
0 (the default), the free memory and disk space scale
to the best display value.


If this option is a 1, the text can overlap the window
title text. If this option is 0 (the default), the
text is not displayed if there is not enough room.


This option controls whether the menu is access by a
click and hold or by a double click. The default value
is a 0 and the menu is accessed by click and hold. In
order to use the area that the clock information is
displayed to postion a window, set this value to a 1.
This will cause a short single click to toggle the
information and a longer click to behave normally (drag
the window). The clock menu can be accessed by a double
click on the clock information.


Feel free to distribute this program to others. All I
ask is that this file remain with the distributed copies.
This product is shareware. If you like it, send $5. If
you want to licence a number of copies, the following table
gives the discount rates:

Number of usersCostPrice per user
25$ 100$4.00
50$ 150$3.00
100$ 250$2.50
250$ 500$2.00
500$ 750$1.50


This software is distributed "as is". Although I know of
no problems with the software, I make no warranties.


If you have any problems with this program or ideas for
features that should be added, I can be reached at the
following electronic addresses (in addition to the mail
address and telephone number below).

Internet: [email protected]
CompuServe: 70312,743

See REGISTER.TXT for the registration form.

 December 5, 2017  Add comments

Leave a Reply