Jan 082018
 
Reconfig allows you to quickly change to different DOS configurations on your hard disk (Autoexec.bat and Config.sys files).
File RECNFG21.ZIP from The Programmer’s Corner in
Category Utilities for DOS and Windows Machines
Reconfig allows you to quickly change to different DOS configurations on your hard disk (Autoexec.bat and Config.sys files).
File Name File Size Zip Size Zip Type
INSTALL.BAT 1629 525 deflated
NSLHELP.BAT 7535 2664 deflated
README 4684 1501 deflated
REBOOT.COM 17 17 stored
RECONFIG.PGM 200778 95221 deflated
TURNKEY3.NFO 6441 1797 deflated

Download File RECNFG21.ZIP Here

Contents of the README file



--- README FILE FOR RECONFIG 2.1 ---

Reconfig allows you to quickly change to different DOS configurations on your
hard disk. A configuration is comprised of the Autoexec.bat and Config.sys
files. Reconfig helps you to maintain a database of up to 100 of these
configurations with its built-in editor and drop-down menus. To run the
program, just type RECONFIG (after installing it first).

Once you have installed Reconfig, you will be able to change to your normal
configuration by typing: RECONFIG NORMAL
This will copy your "normal" configuration to the files Autoexec.bat and
Config.sys. Reconfig will then automatically execute a reboot.

Automatically defined for you is a minimal configuration, for when you want
to try out new software without any memory-resident software loaded. To load
the minimal configuration, type: RECONFIG MINIMAL

If you wanted to change your configuration, but did not want to have an
automatic reboot, simply add the word NOBOOT at the end of the command.
For example: RECONFIG NORMAL NOBOOT

You are probably maintaining different configurations already. You might be
using a text editor to make changes to Autoexec.bat and Config.sys, only to
have to change them back when you want your original configuration. Use
Reconfig to define your own configurations. Some examples of configurations
you might want to maintain are: WINDOWS, NOSIDEKICK, HOSTMODE, etc.


HARDWARE REQUIREMENTS

IBM-compatible microcomputer with 256K memory running DOS 2.0 or later, and
a hard disk.


INSTALLATION

Type INSTALL, and then press the Enter key.

If you want to install Reconfig to a directory other than \RECONFIG, type
INSTALL [directory-name] For example, INSTALL REEK
Notice that the directory-name should not include a leading backslash.


LIST OF FILES ON THIS DISKETTE

INSTALL BAT Reconfig hard disk installation program
README List of files on this diskette, and order form
RECONFIG PGM Reconfig Program (must be installed first)
REBOOT COM Program that is used by Reconfig to reboot your computer

A file called RECONFIG.BAT is created by the installation process, and is
placed in the root directory of Drive C. You can move this file to any
directory that is in your PATH statement.


NOTE

If you would like an invoice sent, please let us know. An order form has
been included below:




ORDER FORM


Make check Optimal Solutions of NH
payable to: 6 Salem Road
Atkinson, NH 03811

============================================================
Date: PO #:
============================================================
Qty Description Cost Extension
------------------------------------------------------------
| | |
| Reconfig 2.1 | $35 | $
| (includes quick reference card) | |
| | |
| | |
| Other products available: | |
| | |
| Turnkey 3.1 - The Demo Version | $10 | $
| | |
| Turnkey 3.1 - The Personal Version| $49 | $
| | |
| Turnkey 3.1 - The Menu Builder's | $295 | $
| Version | |
| | |
------------------------------------------------------------
Total: $

Checks and money orders accepted.

Your Name:
------------------------------------------------
Address:
------------------------------------------------
:
------------------------------------------------
City:
------------------------------------------------
State:
------------------------------------------------
Zip:
------------------------------------------------


Comments:


 January 8, 2018  Add comments

Leave a Reply