Category : Recently Uploaded Files
Archive   : TM420-3.ZIP
Filename : UPGRADE.TXT

Upgrading from v4.1x to v4.20
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ

Upgrading from 4.1x is sample, you can replace the following
files with the new ones

TM.EXE the main program
TM.OVL the main program (overlay)
TM.RES the resource file
TM.HLP the help file
TMS.EXE the script compiler
TMINST.EXE the installation program
TMSTAT.EXE the statistic program
TMPHONE.EXE the phone maintenance utility
HOST.EXE the self-extract host scripts
TOOLBOX.EXE the self-extract toolbox scripts

There is no change in the configuration file format.
Note: DO NOT change the version number in TM.CFG. It should read
4.11 even you are running 4.20.

The old script files (both *.SCR and *.TMS) are compatible with the
new ones. However, a v4.20 script may not run correctly in an older
version if the script contains the new Query/Set QuoteString,
Query/Set ScriptEcho, Query/Set AltKeys and WaitFor -1 commands.



Upgrading from v3.xx and v4.00 to v4.20
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ

To upgrade from v3.xx and 4.00, you can replace the following files
with the new ones

TM.EXE the main program
TM.OVL the main program (overlay)
TM.RES the resource file
TM.HLP the help file
TMS.EXE the script compiler
TMINST.EXE the installation program
TMSTAT.EXE the statistic program
TMPHONE.EXE the phone maintenance utility
HOST.EXE the self-extract host scripts
TOOLBOX.EXE the self-extract toolbox scripts

Then run "UPGRADE TM.CFG" to upgrade your configuration file to the
new format.



Upgrading from v2.xx to v4.20
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ

This upgrade procesure assumes that you have Telemate already installed
in the directory \TM,

1. Before you do anything, MAKE A BACKUP of the \TM directory. You WILL
NEED some files from it later.
2. Copy all files (or extract them from the .ZIP) to \TM. You can
overwrite all the files.
3. Copy the TM.CFG from your backup to \TM and at the DOS prompt run
"UPGRADE TM.CFG".
4. Copy the TM.FON and TM.MEM from your backup to \TM.
5. Delete all *.TMS files.
6. Run TMINST.EXE to check if all the options are setup correctly.
7. If you are using the HOST script, you can run HOST.EXE to extract
the host script, copy the HUSER.HST from the backup to \TM and
then run the script HCONFIG.SCR to setup the host mode.

If you want to install v4.11 in a different directory, say C:\TM4,

1. Copy all the files (or extract them from .ZIP) to C:\TM4.
2. Copy the TM.CFG from \TM to C:\TM4 and at the DOS prompt run
"UPGRADE TM.CFG".
3. Edit TM.CFG and changes the lines to
DirTelemate="C:\TM4\"
DirScript="C:\TM4\"
* It is VERY IMPORTANT that you have the directory set up correctly.
Otherwise, Telemate will not run.
4. Edit your AUTOEXEC.BAT and change (or add) the line
SET TMCFG=C:\TM4\TM.CFG
5. Copy the TM.FON and TM.MEM from \TM to C:\TM4.
6. Run TMINST.EXE to check if all the options are setup correctly.

Notes:
1. The new *.MAC and *.PAD are not compatible with the old ones. You
will have to set up your macro again.
2. If you are using a 101-key keyboard, you should turn ON the 'Enhanced
Keyboard' option under the Options/Mouse & Keyboard dialog.
3. The VT102 keypad table is changed in order to emulate the actual
terminal more accurately. Please refer to Appendix B in the file
TELEMATE.DOC for details on the keyboard assignment.