Category : Recently Uploaded Files
Archive   : MSVIBM.ZIP
Filename : SPORT.SCR

; FILE SPORT.SCR (MSMSPORT.SCR)
;
; An MS-DOS Kermit script program for dialing the US Robotics Sportster or
; Courier 14400 or 28800 modem, to be used with MS-DOS Kermit 3.12 or later.
; The modem is set for RTS/CTS flow control, fixed interface speed of 57600,
; and to negotiate highest modulation, compression, with error correction
; with all types of fallback.
;
; To use: SET MODEM=SPORT (in DOS, before starting Kermit)
; or: DEFINE _MODEM SPORT (in Kermit, before dialing)
; or: SET MODEM SPORT (in Kermit, v3.14 or later)
; and: Make sure Kermit executes the standard MSKERMIT.INI file.
;
; Authors: Christine M. Gianone, Frank da Cruz; Columbia U, June 1993
; Modified 8 Aug 93 to fix typo (W1 is not a legal Sportster command).
; 10 Nov 93 - eliminate DSR check.
; 18 Jan 95 - update for version 3.14, SET CARRIER, etc.
; 24 Mar 95 - update comments after testing with V.34 model.
;
def errfail echo \%1, hangup, goto fail ; Macro to handle failures.
if < VERSION 312 errfail {MS-DOS Kermit 3.12 or later required.}

define chkerr if fail stop 1 \%1
define chkok input 3 OK, if fail stop 1 \%1

if > VERSION 313 set carrier OFF ; Don't require carrier during dialing.

set input echo on ; So we can watch what happens.
set input timeout proceed ; Allow IF SUCCESS, IF FAILURE.
set input case ignore ; Use caseless string comparisons

set parity none ; Avoid parity foulups
set flow none ; Avoid flow control deadlocks
hangup ; Begin by dropping DTR
pause 1 ; for one second

; Speed. Don't worry about modem, it autobauds up to 57600 bps.

set speed 57600
echo Configuring USR Sportster on \v(line).

:INIT
output ATQ0V1&S0I3\13 ; Enable word result codes, turn on DSR
chkok {Can't get modem's attention}
output AT E1 X4 &A3 &D2\13 ; Set echoing, result codes, etc.
chkok {Can't initialize modem}
output AT&B1\13 ; Fixed interface speed
chkok {Can't fix interface speed}
output AT &H1&R2\13 ; RTS/CTS hardware flow control
chkok {Can't enable RTS/CTS} ; On modem
wait 5 cts
if fail errfail {Modem is not asserting CTS!}
set flow rts/cts ; And in Kermit too, but only now
output AT &N0\13
chkok {Can't enable modulation fallback}
output AT &K1&M4\13 ; Compression and EC enabled
chkok {Can't enable compression and EC}
output AT &Y3\13 ; Make modem pass BREAK transparently
chkok {Can't become transparent to BREAK}

if def \%1 if not equal "\%1" "=" goto BEGIN
echo Modem initialization complete, no number to dial.
end 0

:BEGIN ; Now DIAL.
clear ; Clear INPUT buffer.
set count 5 ; Dialing retry counter, 5 tries allowed.
echo Dialing \%1 on \v(line) at \v(speed) bps, wait...
echo
pause 1
goto dial ; 1st time, skip pause and Redialing message

:REDIAL
set alarm 30
pause 30 ; Wait 30 seconds before redialing.
if not alarm errfail {Dialing canceled.}
echo Redialing... ; Message for redialing.
pause 1

:DIAL
output ATD\%1\13 ; Dial the number.
set alarm 90 ; (For detecting keyboard interruptions.)
if > VERSION 312 clear input ; Clear echo from INPUT buffer.
if < VERSION 313 clear
input 30 \10 ; Wait for the linefeeds...

:GETMSG
input 60 \10 ; ...that surround the response message.
if success goto gotmsg ; Got a message.
if alarm errfail {No response from modem.} ; No response in 90 seconds.
hangup ; User interrupted from keyboard,
output \13 ; cancel dialing by sending carriage return,
goto again ; and go try again right away.

:GOTMSG
reinput 1 CONNECT ; Got a message, was it CONNECT?
if success goto done ; If so, we're done.
reinput 1 BUSY ; Line is busy.
if success goto busy ; Go wait a while and then dial again.
reinput 1 ERROR ; Command syntax error.
if success errfail {Dialing command error}
reinput 1 NO CARRIER ; Phone didn't answer or no carrier.
if success errfail {No answer or no carrier}
reinput 1 NO ANSWER ; No answer
if success errfail {No answer - try again later}
reinput 1 NO DIAL TONE ; No dialtone when phone taken off hook.
if success errfail {No dialtone - Is your modem connected to the phone line\63}
goto getmsg ; None of the above, get another message.

:BUSY
if < \v(count) 2 goto quit ; Don't wait 30 seconds if tries are used up.
Echo Line is busy, will dial again in 30 seconds.
echo Press any key to cancel...
output \13 ; CR cancels dialing
hangup ; Hang up.
:AGAIN
if count goto redial ; Then go redial.
:QUIT
errfail {It never answers! I give up.} ; Too many tries.

:DONE ; Connected.
echo \7 ; Celebrate with a beep.
define errfail ; Erase local macro definitions...
if > VERSION 313 set carrier on ; Require carrier from now on.
end 0 ; Finished, return success code.

:FAIL ; Dialing failed, no beep.
define errfail ; Erase local macro definitions...
if > VERSION 313 set carrier off ; So they can CONNECT and see what's up...
end 1 ; Return failure code.

; End of SPORT.SCR