Category : Recently Uploaded Files
Archive   : INTER48D.ZIP
Filename : INTERRUP.N

 
Output of file : INTERRUP.N contained in archive : INTER48D.ZIP
Interrupt List, part 14 of 14
This compilation is Copyright (c) 1989,1990,1991,1992,1993,1994,1995 Ralf Brown
----------80---------------------------------
INT 80 - Q-PRO4 - ???
--------r-80---------------------------------
INT 80 - reserved for BASIC
Note: this vector and INT 81 through INT ED are modified but not restored by
Direct Access v4.0, and may be left dangling by other programs
written with the same version of compiled BASIC
SeeAlso: INT 81"BASIC",INT 86"BASIC",INT EF"BASIC"
--------E-80---------------------------------
INT 80 - Phar Lap 386|DOS-Extender - RELOCATED PRINT-SCREEN
Note: the extender relocates INT 05 to here by default, but can be told to
leave INT 05 alone with the commandline (or DOSX= environment
variable) flag -PRIVEC 5
SeeAlso: INT 05
--------d-80---------------------------------
INT 80 - BusLogic BT-946C PCI SCSI Adapter - SCRATCHPAD RAM (NOT A VECTOR!)
Note: the factory-default location for the eight bytes of scratchpad RAM
needed by the SCSI adapter is 0000h:0200h, which is interrupt
vectors 80h and 81h
SeeAlso: INT 81"BusLogic"
--------s-80----BL00-------------------------
INT 80 - SBSIM - "STARTSND" - START SOUND ON SPECIFIED DRIVER
BL = 00h
BH = driver number (01h = FM, 02h=DDBV, 03h=memvoice, 05h=MIDI)
Return: AX = initialization result (see #3098)
Program: SBSIM is Creative Labs' SoundBlaster Simplified Interface Module,
which provides access to multiple drivers for the SoundBlaster
board through a single interface
Range: INT 80h to INT BFh, selected automatically
Note: the SBSIM installation check consists of testing for the signature
"SBSIM" at offset 103h in the interrupt handler's segment.
SeeAlso: INT 80/BL=01h"SBSIM",INT 80/BL=02h"SBSIM",INT 80/BL=03h"SBSIM"
SeeAlso: INT 80/BX=0000h"SBSIM"

(Table 3098)
Values for SBSIM error code:
01h busy--currently in use
02h bad driver specified
03h invalid function
04h voice process already active
05h couldn't start CT-VOICE
06h couldn't start CTVDSK
07h invalid SBSIM handle
08h buffer not initialized yet
09h bad filename
0Ah bad file handle
0Bh driver not started yet
0Ch XMS driver not installed
0Dh no free SBSIM handles
0Eh bad file type
0Fh couldn't free XMS block
10h invalid source selected
11h get pan position failed
12h set pan position failed
13h set volume failed
14h couldn't start fade/pan
15h couldn't stop fade/pan
16h couldn't pause fade/pan
17h not a fade/pan operation
18h bad mode for fade/pan
19h couldn't start fade/pan
1Ah source not fading/panning
1Bh FM or MIDI already playing
1Ch bad MIDI mapper format
--------s-80----BL01-------------------------
INT 80 - SBSIM - "PLAYSND" - PLAY MUSIC/VOICE ON SELECTED DRIVER
BL = 01h
BH = driver number (01h = FM, 02h=DDBV, 03h=memvoice, 05h=MIDI)
Return: AX = result (see #3098)
SeeAlso: INT 80/BL=00h"SBSIM",INT 80/BL=02h"SBSIM",INT 80/BL=04h"SBSIM"
--------s-80----BL02-------------------------
INT 80 - SBSIM - "STOPSND" - STOP MUSIC/VOICE ON SELECTED DRIVER
BL = 02h
BH = driver number (01h = FM, 02h=DDBV, 03h=memvoice, 05h=MIDI)
Return: nothing
SeeAlso: INT 80/BL=00h"SBSIM",INT 80/BL=01h"SBSIM",INT 80/BL=03h"SBSIM"
--------s-80----BL03-------------------------
INT 80 - SBSIM - "PAUSESND" - TEMPORARILY PAUSE PLAYBACK ON SELECTED DRIVER
BL = 03h
BH = driver number (01h = FM, 02h=DDBV, 03h=memvoice, 05h=MIDI)
Return: nothing
SeeAlso: INT 80/BL=00h"SBSIM",INT 80/BL=02h"SBSIM",INT 80/BL=04h"SBSIM"
SeeAlso: INT 80/BL=05h
--------s-80----BL04-------------------------
INT 80 - SBSIM - "RESUMESND" - RESTART PLAYBACK ON SELECTED DRIVER
BL = 04h
BH = driver number (01h = FM, 02h=DDBV, 03h=memvoice, 05h=MIDI)
Return: nothing
SeeAlso: INT 80/BL=00h"SBSIM",INT 80/BL=03h"SBSIM",INT 80/BL=05h"SBSIM"
--------s-80----BL05-------------------------
INT 80 - SBSIM - "GETSNDSTAT" - GET DRIVER'S STATUS
BL = 05h
BH = driver number (01h = FM, 02h=DDBV, 03h=memvoice, 05h=MIDI)
Return: AX = status
SeeAlso: INT 80/BL=00h"SBSIM",INT 80/BL=01h"SBSIM",INT 80/BL=03h"SBSIM"
--------s-80----BX0000-----------------------
INT 80 - SoundBlaster SBFM driver - GET VERSION
BX = 0000h
Return: ???
Note: SBFM installs at a free interrupt in the range 80h through BFh
SeeAlso: BX=0008h"SBFM",INT 2F/AX=FBFBh
--------s-80----BX0000-----------------------
INT 80 - SBSIM - "QUERYVERSION" - GET VERSION
BX = 0000h
Return: AX = version (AH = major, AL = minor)
Program: SBSIM is Creative Labs' SoundBlaster Simplified Interface Module,
which provides access to multiple drivers for the SoundBlaster
board through a single interface
Range: INT 80h to INT BFh, selected automatically
Note: the SBSIM installation check consists of testing for the signature
"SBSIM" at offset 103h in the interrupt handler's segment.
SeeAlso: BX=0001h"SBSIM",BX=0005h"SBSIM",INT 21/AX=4402h"CTMMSYS"
SeeAlso: INT 80/BL=00h"SBSIM"
Index: installation check;SBSIM|installation check;SoundBlaster
--------s-80----BX0001-----------------------
INT 80 - SoundBlaster SBFM driver - SET MUSIC STATUS BYTE ADDRESS
BX = 0001h
DX:AX -> music status byte
SeeAlso: BX=0000h"SBFM",BX=0002h"SBFM",BX=0003h"SBFM"
--------s-80----BX0001-----------------------
INT 80 - SBSIM - "QUERYDRIVERS" - CHECK DRIVERS INSTALLED
BX = 0001h
Return: AX = bit flags for loaded drivers (see #3099)
SeeAlso: BX=0000h"SBSIM",BX=0002h"SBSIM",BX=0005h"SBSIM",INT 80/BL=00h"SBSIM"

Bitfields for SBSIM loaded drivers:
Bit(s) Description (Table 3099)
0 FM
1 double disk-buffered voice driver (DDBV)
2 memory voice driver
3 auxiliary driver (mixer)
4 MIDI
--------s-80----BX0002-----------------------
INT 80 - SoundBlaster SBFM driver - SET INSTRUMENT TABLE
BX = 0002h
CX = number of instruments
DX:AX -> instrument table
SeeAlso: BX=0000h"SBFM",BX=0001h"SBFM",BX=0005h"SBFM"
--------s-80----BX0002-----------------------
INT 80 - SBSIM - GETADDRESS" - GET SELECTED DRIVER'S ENTRY POINT
BX = 0002h
AX = driver (00h = FM,01h = DDBV,02h = memvoice,03h = mixer,04h = MIDI)
Return: CF clear if successful
DX:AX -> entry point
CF set on error
SeeAlso: BX=0000h"SBSIM",BX=0001h"SBSIM",BX=0005h"SBSIM",INT 80/BL=00h"SBSIM"
--------s-80----BX0003-----------------------
INT 80 - SoundBlaster SBFM driver - SET SYSTEM CLOCK RATE
BX = 0003h
AX = clock rate divisor (1193180 / desired frequency in Hertz)
FFFFh to restore to 18.2 Hz
SeeAlso: BX=0000h"SBFM",BX=0001h"SBFM",BX=0004h"SBFM"
--------s-80----BX0004-----------------------
INT 80 - SoundBlaster SBFM driver - SET DRIVER CLOCK RATE
BX = 0004h
AX = driver clock rate divisor (1193180 / frequency in Hertz)
Note: default frequency is 96 Hz
SeeAlso: BX=0000h"SBFM",BX=0003h"SBFM"
--------s-80----BX0005-----------------------
INT 80 - SoundBlaster SBFM driver - TRANSPOSE MUSIC
BX = 0005h
AX = semi-tone offset
SeeAlso: BX=0000h"SBFM",BX=0002h"SBFM",BX=0006h"SBFM"
--------s-80----BX0005-----------------------
INT 80 - SBSIM - "GETBUFFERINFO" - GET DRIVER'S BUFFER ADDRESS
BX = 0005h
AX = driver (00h = FM, 01h = DDB Voice, 04h = MIDI)
Return: CF clear if successful
DX:AX -> buffer
CX = buffer size in K
CF set on error
Program: SBSIM is Creative Labs' SoundBlaster Simplified Interface Module,
which provides access to multiple drivers for the SoundBlaster
board through a single interface
Range: INT 80h to INT BFh, selected automatically
Note: the SBSIM installation check consists of testing for the signature
"SBSIM" at offset 103h in the interrupt handler's segment.
SeeAlso: BX=0000h"SBSIM",BX=0001h"SBSIM",BX=0002h"SBSIM",INT 80/BL=00h"SBSIM"
--------s-80----BX0006-----------------------
INT 80 - SoundBlaster SBFM driver - PLAY MUSIC
BX = 0006h
DX:AX -> music block
Return: AX = status
0000h successful
0001h music already active
SeeAlso: BX=0000h"SBFM",BX=0007h"SBFM",BX=000Ah"SBFM",INT 1A/AX=FF04h
--------s-80----BX0007-----------------------
INT 80 - SoundBlaster SBFM driver - STOP MUSIC
BX = 0007h
Return: AX = status
0000h successful
0001h music not active
SeeAlso: BX=0000h"SBFM",BX=0006h"SBFM",BX=0009h"SBFM",INT 1A/AX=FF05h
--------s-80----BX0008-----------------------
INT 80 - SoundBlaster SBFM driver - RESET DRIVER
BX = 0008h
Return: AX = status
0000h successful
0001h music is active
SeeAlso: BX=0000h"SBFM"
--------s-80----BX0009-----------------------
INT 80 - SoundBlaster SBFM driver - PAUSE MUSIC
BX = 0009h
Return: AX = status
0000h successful
0001h no music active
SeeAlso: BX=0000h"SBFM",BX=0007h"SBFM",BX=000Ah"SBFM",INT 1A/AX=FF01h
--------s-80----BX000A-----------------------
INT 80 - SoundBlaster SBFM driver - RESUME MUSIC
BX = 000Ah
Return: AX = status
0000h successful
0001h no music paused
SeeAlso: BX=0000h"SBFM",BX=0006h"SBFM",BX=0009h"SBFM"
--------s-80----BX000B-----------------------
INT 80 - SoundBlaster SBFM driver - SET USER-DEF TRAP FOR SYSTEM-EXCLUSIVE CMDS
BX = 000Bh
DX:AX -> trap routine
SeeAlso: BX=0000h"SBFM"
--------s-80----BX0400-----------------------
INT 80 - SBSIM - "GETVOLUME" - GET SOURCE'S VOLUME
BX = 0400h
AX = sound source (see #3100)
Return: CF clear if successful
AX = volume
CF set on error
AX = error code (see #3098 at INT 80/BL=00h)
SeeAlso: BX=0401h"SBSIM"

(Table 3100)
Values for SBSIM sound source:
00h master volume
01h voice
02h FM
03h CD
04h line in
05h microphone
--------s-80----BX0401-----------------------
INT 80 - SBSIM - "SETVOLUME" - SET SOURCE'S VOLUME
BX = 0401h
AX = sound source (see #3100)
DX = new volume
Return: AX = result (0000h = success) (see also INT 80/BL=00h)
SeeAlso: BX=0400h"SBSIM"
--------N-8001-------------------------------
INT 80 - QPC Software PKTINT.COM - INITIALIZE
AH = 01h
Return: AX = 0000h
CX = FFFFh
DX = FFFFh
Notes: this interrupt is the WinQVTNet protected mode interface to Windows 3.0
all buffer pointers are reset back to 0
--------N-8002-------------------------------
INT 80 - QPC Software PKTINT.COM - GET BUFFER ADDRESSES
AH = 02h
BX = extra bytes to allocate per packet
Return: AX = segment address of 10K buffer (for receives???)
BX = segment address of 2K buffer (for sends???)
SeeAlso: AH=05h
--------N-8003-------------------------------
INT 80 - QPC Software PKTINT.COM - GET ENTRY POINT
AH = 03h
Return: CX:DX -> receive call address
Note: the returned address can be used in the packet driver calls since it
will be a valid address in all DOS boxes
SeeAlso: AH=06h
--------N-8004-------------------------------
INT 80 - QPC Software PKTINT.COM - ENABLE???
AH = 04h
BX = ???
Return: ???
SeeAlso: AH=01h
--------N-8005-------------------------------
INT 80 - QPC Software PKTINT.COM - GET RECEIVE STATISTICS
AH = 05h
Return: AX = amount of buffer currently in use
BX = current offset in buffer
CX = number of times receive has been called
SeeAlso: AH=02h
--------N-8006-------------------------------
INT 80 - QPC Software PKTINT.COM - REMOVE RECEIVED PACKET
AH = 06h
Return: BX = next packet offset
CX = number of bytes still buffered
DX = size of packet released back into buffer pool
SeeAlso: AH=03h
--------r-81---------------------------------
INT 81 - reserved for BASIC
Note: this vector is modified but not restored by Direct Access v4.0, and
may be left dangling by other programs written with the same version
of compiled BASIC
SeeAlso: INT 80"BASIC",INT 82"BASIC"
--------N-81---------------------------------
INT 81 - IBM TOKEN RING ADAPTER - ???
SeeAlso: INT 82"TOKEN RING",INT 91"TOKEN RING"
--------d-81---------------------------------
INT 81 - BusLogic BT-946C PCI SCSI Adapter - SCRATCHPAD RAM (NOT A VECTOR!)
Note: the factory-default location for the eight bytes of scratchpad RAM
needed by the SCSI adapter is 0000h:0200h, which is interrupt
vectors 80h and 81h
SeeAlso: INT 80"BusLogic"
--------b-81---------------------------------
INT 81 - AMI WinBIOS - SECOND HARD DRIVE AUTODETECTION
Notes: used by WinBIOS with core version of July 1994 or later
QEMM 7.5 began using this interrupt internally after the QPAT3
maintenance release when searching for "ROM holes", causing a
lengthy delay during bootup. Adding the QEMM parameter RH:N will
avoid the QEMM call to INT 81 and speed up the boot process
--------s-810200---------------------------
INT 81 - Gravis UltraSound - MegaEm - PROCESS COMMAND LINE
AX = 0200h
BX = PSP segment
SI = ??? (data area)
Return: AX = status (see #3101)
BL = emulation state
bit 1 Emulation is on
bit 2 Emulation is off
Program: MegaEm is a protected-mode SoundBlaster, SoundCanvas, and MT-32
emulator for the Gravis UltraSound
Range: INT ??? to INT ??? (see INT 21/AX=FD12h)
SeeAlso: AX=0202h,AX=0300h,AX=0400h,INT 21/AX=FD12h/BX=3457h

(Table 3101)
Values for MegaEm status:
0000h successful
0001h invalid command line optie
0002h display options
0003h ???
0004h invalid number of voices specified
0005h could not load enough patches to provide acceptable emulation
0006h to many warnings on patch loading
0007h ??? (not used anymore)
0008h /CO and SCSI don't work together
0009h invalid music volume
000Ah invalid master volume
000Bh /SC switch is no longer valid
0100h ??? (some error on patch loading)
--------s-810202---------------------------
INT 81 - Gravis UltraSound - MegaEm - ???
AX = 0202h
Return: AX = ???
SeeAlso: AX=0200h,AX=0300h,AX=0400h,INT 21/AX=FD12h/BX=3457h
--------s-810300---------------------------
INT 81 - Gravis UltraSound - MegaEm - LOAD SAMPLE ???
AX = 0300h
Return: AX = ???
SeeAlso: AX=0200h,AX=0202h,AX=0400h,INT 21/AX=FD12h/BX=3457h
--------s-810400---------------------------
INT 81 - Gravis UltraSound - MegaEm - ???
AX = 0400h
BX = ??? (segment)
Return: AX = ???
BX = ???
Program: MegaEm is a protected-mode SoundBlaster, SoundCanvas, and MT-32
emulator for the Gravis UltraSound
SeeAlso: AX=0200h,AX=0202h,AX=0300h,INT 21/AX=FD12h/BX=3457h
--------s-812010------------------------
INT 81 - Gravis UltraSound - MEGA_EM v3.0+ - ???
AX = 2010h
???
Return: ???
--------s-812011------------------------
INT 81 - Gravis UltraSound - MEGA_EM v3.0+ - ???
AX = 2011h
???
Return: ???
--------s-812012------------------------
INT 81 - Gravis UltraSound - MEGA_EM v3.0+ - ???
AX = 2012h
???
Return: ???
--------s-812015------------------------
INT 81 - Gravis UltraSound - MEGA_EM v3.0+ - ???
AX = 2015h
???
Return: ???
--------r-82---------------------------------
INT 82 - reserved for BASIC
SeeAlso: INT 81"BASIC",INT 83"BASIC"
--------N-82---------------------------------
INT 82 - IBM TOKEN RING ADAPTER - ???
AH = function
00h display message???
DS:BX -> string
???
Return: ???
SeeAlso: INT 81"TOKEN RING",INT 91"TOKEN RING"
--------r-83---------------------------------
INT 83 - reserved for BASIC
SeeAlso: INT 82"BASIC",INT 84"BASIC"
--------s-8300-------------------------------
INT 83 - JM Pro Tracker v5.0 - ???
AH = 00h
???
Return: CF clear (successful)
AX = ??? (0302h)
Program: JM Pro Tracker is a public-domain resident .MOD (digital music)
player by Josha Munnik

(Table 3102)
Values for JM Pro Tracker error code:
000Ah ???
000Bh ???
0014h ???
001Eh some required parameters have not yet been set
001Fh already playing???
FExxh busy (API call already in progress)
FFxxh invalid function number
--------s-8301-------------------------------
INT 83 - JM Pro Tracker v5.0 - ???
AH = 01h
DX = ??? or FFFFh
???
Return: CF clear if successful
CF set on error
AX = error code (see #3102)
--------s-8302-------------------------------
INT 83 - JM Pro Tracker v5.0 - ???
AH = 02h
BX = ???
???
Return: CF clear if successful
AX = ???
BX = ???
CX = ???
DX = ???
SI = ???
CF set on error
AX = error code (000Ah,000Bh,other) (see #3102)
--------s-8303-------------------------------
INT 83 - JM Pro Tracker v5.0 - ???
AH = 03h
BX = ??? (only low four bits, must be nonzero)
CX = ???
???
Return: CF clear if successful
CF set on error
AX = error code (0014h) (see #3102)
--------s-8304-------------------------------
INT 83 - JM Pro Tracker v5.0 - SET DMA BUFFER???
AH = 04h
CX = number of bytes in suggested buffer
ES:DI -> suggested buffer for DMA transfers???
Return: CF clear if successful
ES:AX -> actual buffer (filled with bytes of 80h)
CX = actual length (multiple of 4)
CF set on error
AX = error code (see #3102)
Note: the buffer must not cross a 64K DMA page boundary
--------s-8305-------------------------------
INT 83 - JM Pro Tracker v5.0 - SET ??? BUFFER
AH = 05h
CX = length of buffer
ES:DI -> buffer for/containing ???
Return: CF clear (successful)
SeeAlso: AH=06h,AH=07h,AH=18h
--------s-8306-------------------------------
INT 83 - JM Pro Tracker v5.0 - SET ??? BUFFER
AH = 06h
CX = length of buffer
ES:DI -> buffer for/containing ???
Return: CF clear (successful)
SeeAlso: AH=05h,AH=07h,AH=18h
--------s-8307-------------------------------
INT 83 - JM Pro Tracker v5.0 - SET ??? BUFFER
AH = 07h
BX = ???
CX = length of buffer
ES:DI -> buffer for/containing ???
Return: CF clear (successful)
SeeAlso: AH=05h,AH=06h,AH=18h
--------s-8308-------------------------------
INT 83 - JM Pro Tracker v5.0 - START PLAYING???
AH = 08h
???
Return: CF clear if successful
???
CF set on error
AX = error code (001Eh,001Fh) (see #3102)
SeeAlso: AH=09h,AH=0Ah
--------s-8309-------------------------------
INT 83 - JM Pro Tracker v5.0 - PAUSE???
AH = 09h
???
Return: CF clear if successful
CF set on error
AX = error code (see #3102)
SeeAlso: AH=08h,AH=0Ah
--------s-830A-------------------------------
INT 83 - JM Pro Tracker v5.0 - RESUME???
AH = 0Ah
???
Return: CF clear if successful
CF set on error
AX = error code (001Fh) (see #3102)
SeeAlso: AH=08h,AH=09h
--------s-830B-------------------------------
INT 83 - JM Pro Tracker v5.0 - ???
AH = 0Bh
BX = ???
???
Return: CF clear if successful
CF set on error
--------s-830C-------------------------------
INT 83 - JM Pro Tracker v5.0 - ???
AH = 0Ch
DX bit 5 = ???
???
Return: CF clear if successful
BX = ??? (FFFFh)
CX = ??? (0000h)
DX = ???
CF set on error
AX = error code (see #3102)
--------s-830D-------------------------------
INT 83 - JM Pro Tracker v5.0 - ???
AH = 0Dh
BX = ???
???
Return: CF clear (successful)
--------s-830E-------------------------------
INT 83 - JM Pro Tracker v5.0 - ???
AH = 0Eh
BX = ??? (ignored if ES:DI = 0000h:0000h)
ES:DI -> ??? or 0000h:0000h
Return: CF clear (successful)
--------s-830F-------------------------------
INT 83 - JM Pro Tracker v5.0 - ???
AH = 0Fh
???
Return: CF clear if successful
AX = ???
CF set on error
AX = error code (see #3102)
--------s-8310-------------------------------
INT 83 - JM Pro Tracker v5.0 - ???
AH = 10h
BL = subfunction???
CX = ???
DX = ???
???
Return: CF clear if successful
CX = DX = ???
CF set on error
AX = error code (see #3102)
SeeAlso: AH=18h
--------s-8311-------------------------------
INT 83 - JM Pro Tracker v5.0 - ???
AH = 11h
BL = ???
CX = ???
Return: CF clear (successful)
--------s-8312-------------------------------
INT 83 - JM Pro Tracker v5.0 - CLEAR ???
AH = 12h
Return: nothing
--------s-8313-------------------------------
INT 83 - JM Pro Tracker v5.0 - ???
AH = 13h
BX = ???
Return: CF clear (successful)
--------s-8314-------------------------------
INT 83 - JM Pro Tracker v5.0 - ???
AH = 14h
???
Return: CF clear (successful)
BX = ???
--------s-8315-------------------------------
INT 83 - JM Pro Tracker v5.0 - GET ???
AH = 15h
BX = what to get (zero/nonzero)
Return: CF clear if successful
BX = ???
DX = ???
CF set on error
AX = error code (see #3102)
--------s-8316-------------------------------
INT 83 - JM Pro Tracker v5.0 - ???
AH = 16h
AL = subfunction
00h ???
Return: BX = ???
CX = ???
DX = ???
ES:DI -> ???
CF indicates ???
01h ???
Return: BX = ???
CX = ???
DX = ???
Return: CF clear if successful
CF set on error
AX = error code (FFxxh) (see #3102)
--------s-8317-------------------------------
INT 83 - JM Pro Tracker v5.0 - UNHOOK API INTERRUPT
AH = 17h
Return: CF clear if successful
CF set on error (hooked by another program)
--------s-8318-------------------------------
INT 83 - JM Pro Tracker v5.0 - SET BUFFERS
AH = 18h
ES:DI -> buffer-pointer structure (see #3103)
Return: nothing
SeeAlso: AH=05h,AH=06h,AH=07h,AH=10h

Format of JM Pro Tracker buffer-pointer structure:
Offset Size Description (Table 3103)
00h WORD length of ??? buffer (see AH=05h)
02h DWORD -> ??? buffer (see AH=05h)
06h WORD length of ??? buffer (see AH=06h)
08h DWORD -> ??? buffer (see AH=06h)
0Ch WORD length of ??? buffer (see AH=07h)
0Eh DWORD -> ??? buffer (see AH=07h)
12h WORD ??? (see AH=07h)
14h WORD ??? (see AH=10h) (subfunction 01h)
16h WORD ??? (see AH=10h) (subfunction 01h)
18h WORD ??? (see AH=10h) (subfunction 00h)
1Ah WORD ??? (see AH=10h) (subfunction 01h)

--------r-84---------------------------------
INT 84 - reserved for BASIC
SeeAlso: INT 83"BASIC",INT 85"BASIC"
--------r-85---------------------------------
INT 85 - reserved for BASIC
Note: INT 80 through INT ED are modified but not restored by Direct Access
v4.0, and may be left dangling by other programs written with the
same version of compiled BASIC
SeeAlso: INT 84"BASIC",INT 86"BASIC"
--------N-86---------------------------------
INT 86 - NetBIOS - ORIGINAL INT 18
Note: some implementations of NetBIOS reportedly relocate INT 18 here
SeeAlso: INT 18
--------r-86---------------------------------
INT 86 - IBM ROM BASIC - used while in interpreter
Notes: called by ROM BASIC, but pointed at IRET by BASIC.COM/BASICA.COM
BASIC.COM/BASICA.COM do not restore vector on termination
SeeAlso: INT 85"BASIC",INT 87"BASIC"
--------r-86---------------------------------
INT 86 - APL*PLUS/PC - Terminate APL session and return to DOS
SeeAlso: INT 21/AH=4Ch,INT 87"APL"
--------r-87---------------------------------
INT 87 - IBM ROM BASIC - used while in interpreter
Notes: called by ROM BASIC
BASIC.COM/BASICA.COM do not restore vector on termination
SeeAlso: INT 86"BASIC",INT 88"BASIC"
--------r-87---------------------------------
INT 87 - APL*PLUS/PC - ???
SeeAlso: INT 86"APL",INT 88/AL=00h
--------v-87---------------------------------
INT 87 - VIRUS - "ZeroHunt" - VIRAL CODE (NOT A VECTOR!)
Note: the ZeroHunt virus copies its resident code down to 0000h:021Ch and
following
SeeAlso: INT 8B"VIRUS"
--------r-88---------------------------------
INT 88 - IBM ROM BASIC - used while in interpreter
Notes: called by ROM BASIC, but pointed at IRET by BASIC.COM/BASICA.COM
BASIC.COM/BASICA.COM do not restore vector on termination
SeeAlso: INT 87"BASIC",INT 89"BASIC"
--------r-88--00-----------------------------
INT 88 - APL*PLUS/PC - CREATE OBJECT OF ARBITRARY RANK OR SHAPE
AL = 00h
BX = STPTR of the variable to be assigned
ES:SI -> model of type, rank, and shape (see #3104)
Return: ES:DI -> first data byte of object
DX:CX = number of elements in the object
SeeAlso: INT C8"APL"

Format of APL*PLUS/PC shape model:
Offset Size Description (Table 3104)
00h BYTE type
01h character (2-byte dimension sizes)
02h integer (2-byte dimension sizes)
08h floating point (2-byte dimension sizes)
11h character (4-byte dimension sizes)
12h integer (4-byte dimension sizes)
18h floating point (4-byte dimension sizes)
01h BYTE rank
02h (D)WORD first dimension of shape
N (D)WORD second dimension of shape
...
--------r-88--01-----------------------------
INT 88 - APL*PLUS/PC - CREATE CHARACTER SCALAR/VECTOR/MATRIX <64K IN SIZE
AL = 01h
AH = rank
BX = STPTR of the variable to be assigned
CX = first dimension (if any)
DX = second dimension (if any)
Return: ES:DI -> object
CX = number of elements in the object
Note: each dimension must be 32767 or smaller
SeeAlso: AL=02h,AL=08h,INT C8"APL"
--------r-88--02-----------------------------
INT 88 - APL*PLUS/PC - CREATE INTEGER SCALAR/VECTOR/MATRIX <64K IN SIZE
AL = 02h
AH = rank
BX = STPTR of the variable to be assigned
CX = first dimension (if any)
DX = second dimension (if any)
Return: ES:DI -> object
CX = number of elements in the object
Note: each dimension must be 32767 or smaller
SeeAlso: AL=01h,AL=08h,INT C8"APL"
--------r-88--08-----------------------------
INT 88 - APL*PLUS/PC - CREATE FLOATING POINT SCALAR/VECTOR/MATRIX <64K IN SIZE
AL = 08h
AH = rank
BX = STPTR of the variable to be assigned
CX = first dimension (if any)
DX = second dimension (if any)
Return: ES:DI -> object
CX = number of elements in the object
Note: each dimension must be 32767 or smaller
SeeAlso: AL=01h,AL=02h,INT C8"APL"
--------r-88--F5-----------------------------
INT 88 - APL*PLUS/PC - FORCE OBJECT INTO REAL WORKSPACE FROM VIRTUAL
AL = F5h
BX = STPTR of object
SeeAlso: INT C8"APL"
--------r-88--F6-----------------------------
INT 88 - APL*PLUS/PC - MAKE NAME IMMUNE FROM OUTSWAPPING
AL = F6h
BX = STPTR of object
SeeAlso: AL=F7h,AL=F8h,INT C8"APL"
--------r-88--F7-----------------------------
INT 88 - APL*PLUS/PC - MAKE NAME ELIGIBLE FOR OUTSWAPPING
AL = F7h
BX = STPTR of object
SeeAlso: AL=F6h,AL=F8h,INT C8"APL"
--------r-88--F8-----------------------------
INT 88 - APL*PLUS/PC - REPORT WHETHER NAME IS ELIGIBLE FOR OUTSWAPPING
AL = F8h
BX = STPTR of object
Return: BX = name's outswapping status
0000h eligible
0001h not eligible
SeeAlso: AL=F6h,AL=F7h,INT C8"APL"
--------r-88--F9-----------------------------
INT 88 - APL*PLUS/PC - DETERMINE NAME STATUS
AL = F9h
ES:SI -> name
CX = length of name
Return: CF set if name ill-formed or already in use
BX = STPTR if already in symbol table
CF clear if name is available for use
BX = 0000h
Note: does not force the name into the workspace
SeeAlso: AL=FEh,AL=FFh,INT C8"APL"
--------r-88--FC-----------------------------
INT 88 - APL*PLUS/PC - DETERMINE IF MEMORY AVAIL WITHOUT GARBAGE COLLECTION
AL = FCh
BX = amount of memory needed (paragraphs)
Return: CF clear if memory available
CF set if a workspace compaction is required
SeeAlso: AL=FDh,INT C8"APL"
--------r-88--FD-----------------------------
INT 88 - APL*PLUS/PC - PERFORM GARBAGE COLLECTION AND RETURN AVAILABLE MEMORY
AL = FDh
Return: BX = number of paragraphs available in workspace
SeeAlso: AL=FCh,INT C8"APL"
--------r-88--FE-----------------------------
INT 88 - APL*PLUS/PC - CREATE NAME
AL = FEh
ES:SI -> name
CX = length of name
Return: BX = STPTR of name
DX = interpreter's data segment
SeeAlso: AL=F9h,AL=FFh,INT C8"APL"
--------r-88--FF-----------------------------
INT 88 - APL*PLUS/PC - DETERMINE NAME STATUS
AL = FFh
ES:SI -> name
CX = length of name
Return: CF set if name ill-formed or already in use
BX = STPTR if already in symbol table
CF clear if name is available for use
BX = 0000h
Note: forces the name into the workspace and makes it immune from outswapping
SeeAlso: AL=F9h,AL=FEh,INT C8"APL"
--------r-89---------------------------------
INT 89 - IBM ROM BASIC - used while in interpreter
Notes: called by ROM BASIC
BASIC.COM/BASICA.COM do not restore vector on termination
SeeAlso: INT 88"BASIC",INT 8A"BASIC"
--------r-8A---------------------------------
INT 8A - IBM ROM BASIC - used while in interpreter
Notes: called by ROM BASIC
BASIC.COM/BASICA.COM do not restore vector on termination
SeeAlso: INT 89"BASIC",INT 8B"BASIC"
--------r-8A---------------------------------
INT 8A - APL*PLUS/PC - PRINT SCREEN
Note: same as INT 05
SeeAlso: INT 05,INT 8C"APL",INT CA"APL"
--------r-8B---------------------------------
INT 8B - IBM ROM BASIC - used while in interpreter
Notes: called by ROM BASIC, but pointed at IRET by BASIC.COM/BASICA.COM
BASIC.COM/BASICA.COM do not restore vector on termination
SeeAlso: INT 8A"BASIC",INT 8C"BASIC"
--------r-8B---------------------------------
INT 8B - APL*PLUS/PC - BEEP
Note: same as printing a ^G via INT 21/AH=02h
SeeAlso: INT 21/AH=02h,INT CB"APL"
--------v-8B---------------------------------
INT 8B - VIRUS - "ZeroHunt" - INSTALLATION CHECK (NOT A VECTOR!)
Note: if the ZeroHunt virus is resident, this vector will contain either
EE83h:019Bh (ZH-411) or EE83h:019Fh (ZH-415)
SeeAlso: INT 70"VIRUS",INT 87"VIRUS",INT 9C"VIRUS"
--------r-8C---------------------------------
INT 8C - IBM ROM BASIC - used while in interpreter
Notes: called by ROM BASIC, but pointed at IRET by BASIC.COM/BASICA.COM
BASIC.COM/BASICA.COM do not restore vector on termination
--------r-8C---------------------------------
INT 8C - APL*PLUS/PC - CLEAR SCREEN MEMORY
AX = flag
0000h do not save display attributes
0001h save attributes
SeeAlso: INT CC"APL"
--------r-8D---------------------------------
INT 8D - IBM ROM BASIC - used while in interpreter
Notes: called by ROM BASIC, but pointed at IRET by BASIC.COM/BASICA.COM
BASIC.COM/BASICA.COM do not restore vector on termination
--------r-8E---------------------------------
INT 8E - IBM ROM BASIC - used while in interpreter
Notes: called by ROM BASIC, but pointed at IRET by BASIC.COM/BASICA.COM
BASIC.COM/BASICA.COM do not restore vector on termination
--------r-8F---------------------------------
INT 8F - IBM ROM BASIC - used while in interpreter
Notes: called by ROM BASIC, but pointed at IRET by BASIC.COM/BASICA.COM
BASIC.COM/BASICA.COM do not restore vector on termination
--------r-90---------------------------------
INT 90 - IBM ROM BASIC - used while in interpreter
Notes: called by ROM BASIC, but pointed at IRET by BASIC.COM/BASICA.COM
BASIC.COM/BASICA.COM do not restore vector on termination
--------r-90---------------------------------
INT 90 - APL*PLUS/PC - USED BY PORT 10 PRINTER DRIVER
--------r-91---------------------------------
INT 91 - IBM ROM BASIC - used while in interpreter
Notes: called by ROM BASIC, but pointed at IRET by BASIC.COM/BASICA.COM
BASIC.COM/BASICA.COM do not restore vector on termination
--------N-91---------------------------------
INT 91 - IBM TOKEN RING ADAPTER - ???
SeeAlso: INT 81"TOKEN RING",INT 82"TOKEN RING",INT 93"TOKEN RING"
--------r-92---------------------------------
INT 92 - IBM ROM BASIC - used while in interpreter
Notes: called by ROM BASIC, but pointed at IRET by BASIC.COM/BASICA.COM
BASIC.COM/BASICA.COM do not restore vector on termination
--------N-92---------------------------------
INT 92 - Sangoma X.25 INTERFACE PROGRAM
BX:DX -> control block
SeeAlso: INT 68"Sangoma"
--------e-92E1-------------------------------
INT 92 - Da Vinci eMail Dispatcher INTERFACE
AH = E1h
AL = function
BX = stack count (number of words to push)
CX:DX -> stack data (in word-reversed order ready to push)
Return: AX = status (see #3105)
Note: preserves BP, DS, SI, DI; other registers may be destroyed

(Table 3105)
Values for Da Vinci eMail function status:
0001h success
FF97h "ERS_NOT_AVAILABLE"
FF99h "ERS_TOO_MANY_NAMES"
FF9Ah "ERS_BAD_NAME_PASSWORD"
FFE3h "ERS_NAME_NOT_FOUND"
FFF8h "ERS_USE_STRING" (call NetGetError to get error string)
FFFFh "ERS_NO_SUCH_FILE"
--------e-92E100-----------------------------
INT 92 - Da Vinci eMail Dispatcher - "NetInitStart"
AX = E100h
BX = size of parameter block in words (000Ah)
CX:DX -> parameter block (see #3106)
Return: AX = 0001h success
Desc: this function is used to initialize the dispatcher
SeeAlso: AX=E101h,AX=E103h

Format of Da Vinci eMail "NetInitStart" parameter block:
Offset Size Description (Table 3106)
00h WORD segment of ???
02h WORD offset of ???
04h WORD high part of long ???
06h WORD low part of long ???
08h WORD high part of long ???
0Ah WORD low part of long ???
0Ch WORD high part of long ???
0Eh WORD low part of long ???
10h WORD high part of long ???
12h WORD low part of long ???
--------e-92E101BX0000-----------------------
INT 92 - Da Vinci eMail Dispatcher - "NetInitCheck"
AX = E101h
BX = 0000h
CX:DX ignored
Return: AX = 0001h success
SeeAlso: AX=E100h,AX=E180h
--------e-92E102BX0000-----------------------
INT 92 - Da Vinci eMail Dispatcher - "NetCheckDriver"
AX = E102h
BX = 0000h
CX:DX ignored
Return: AX = 0001h success
Desc: this function is used to determine if the dispatcher is loaded
SeeAlso: AX=E10Bh,AX=E180h
--------e-92E103BX0000-----------------------
INT 92 - Da Vinci eMail Dispatcher - "NetTerminate"
AX = E103h
BX = 0000h
CX:DX ignored
Return: AX = status (see #3105)
SeeAlso: AX=E100h
--------e-92E104-----------------------------
INT 92 - Da Vinci eMail Dispatcher - "NetWhereIs"
AX = E104h
BX = size of parameter block in words (0006h)
CX:DX -> parameter block (see #3107)
Return: AX = status (see #3105)
Desc: this function is used to verify node address for usernames
SeeAlso: AX=E180h

Format of Da Vinci eMail "NetWhereIs" parameter block:
Offset Size Description (Table 3107)
00h WORD segment of node address buffer
02h WORD offset of node address buffer
04h WORD segment of uppercase username
06h WORD offset of uppercase username
08h WORD segment of "DVSEMAIL"
0Ah WORD offset of "DVSEMAIL"
--------e-92E105-----------------------------
INT 92 - Da Vinci eMail Dispatcher - "NetOpen"
AX = E105h
BX = size of parameter block in words (0007h)
CX:DX -> parameter block (see #3108)
Return: AX = 0000h Error
AX = handle
Desc: this function is used to open a submission channel
SeeAlso: AX=E10Ah,AX=E106h,AX=E108h

Format of Da Vinci eMail "NetOpen" parameter block:
Offset Size Description (Table 3108)
00h WORD operation (1 = read, 2 = write)
02h WORD segment of uppercase To: username
04h WORD offset of uppercase To: username
06h WORD segment of "DVSEMAIL"
08h WORD offset of "DVSEMAIL"
0Ah WORD segment of node address
0Ch WORD offset of node address
--------e-92E106BX0004-----------------------
INT 92 - Da Vinci eMail Dispatcher - "NetRead"
AX = E106h
BX = 0004h
CX:DX -> parameter block
Return: AX = 0001h
SeeAlso: AX=E108h
--------e-92E107BX0002-----------------------
INT 92 - Da Vinci eMail Dispatcher - "NetGetError"
AX = E107h
BX = 0002h
CX:DX -> parameter block
Return: AX = 0001h
SeeAlso: AX=E109h,AX=E180h
--------e-92E108-----------------------------
INT 92 - Da Vinci eMail Dispatcher - "NetWrite"
AX = E108h
BX = size of parameter block in words (0004h)
CX:DX -> parameter block (see #3109)
Return: AX = amount written
Desc: This function is used to write transactions to the dispatcher.
The command block is written first and then another call is used
to write the associated data.
SeeAlso: AX=E106h

Format of Da Vinci eMail "NetWrite" parameter block:
Offset Size Description (Table 3109)
00h WORD buffer count (see #3111)
02h WORD segment of command buffer (see #3110)
04h WORD offset of command buffer
06h WORD handle from NetOpen

Format of Da Vinci eMail command buffer:
Offset Size Description (Table 3110)
00h BYTE command
21h '!' Protocol commands for remote control
41h 'A' Authorization protocol element
42h 'B' Return(back) routing information
Associated data is the From: username
43h 'C' Carbon Copy list
Associated data is a comma delimitted list of usernames
44h 'D' Distribution list
Associated data is a comma delimitted list of usernames
45h 'E' Mail end marker
No associated data
48h 'H' Mail message header
Associated data is a message header buffer
4Dh 'M' Mail message
Associated data is the body of the message
4Fh 'O' Object
50h 'P' Paperclip attachment
52h 'R' Routing information
Associated data is the To: username
53h 'S' Subject
Associated data is the subject of the message
54h 'T' Trail of Reply/Forwards
01h BYTE subcommand
02h DWORD length of associated data

Format of Da Vinci eMail message header buffer:
Offset Size Description (Table 3111)
00h 30 BYTEs subject line
1Eh 24 BYTEs To
36h 24 BYTEs From
4Eh DWORD Time
BYTE 00h
BYTE hour
BYTE minute
BYTE second
52h DWORD Date
BYTE 00h
BYTE year
BYTE month
BYTE day
56h DWORD serial number (00000000h)
5Ah WORD mail types (see #3112)
5Ch WORD special types (0)

Bitfields for Da Vinci eMail mail types:
Bit(s) Description (Table 3112)
7 blind carbon copy
6 carbon copy
5 priority
4 confidential
3 certified
2 bulk
1-0 class (first, second, third, bulk)
--------e-92E109-----------------------------
INT 92 - Da Vinci eMail Dispatcher - "NetErrorFix" (UNUSED)
AX = E109h
BX = size of parameter block in words (0001h)
CX:DX -> parameter block (see #3113)
Return: AX = FF97h (ERS_NOT_AVAILABLE)
SeeAlso: AX=E107h,AX=E180h

Format of Da Vinci eMail "NetErrorFix" parameter block:
Offset Size Description (Table 3113)
00h WORD ???
--------e-92E10A-----------------------------
INT 92 - Da Vinci eMail Dispatcher - "NetClose"
AX = E10Ah
BX = size of parameter block in words (0001h)
CX:DX -> parameter block (see #3114)
Return: AX = 0001h
Desc: this function is used to close a dispatcher handle
SeeAlso: AX=E105h

Format of Da Vinci eMail "NetClose" parameter block:
Offset Size Description (Table 3114)
00h WORD handle from NetOpen
--------e-92E10B-----------------------------
INT 92 - Da Vinci eMail Dispatcher - "NetCheckQueue"
AX = E10Bh
BX = size of parameter block in words (0004h)
CX:DX -> parameter block (see #3115)
Return: AX = 0001h
SeeAlso: AX=E102h,AX=E10Ch

Format of Da Vinci eMail "NetCheckQueue" parameter block:
Offset Size Description (Table 3115)
00h WORD segment of 24-byte username buffer
02h WORD offset of 24-byte username buffer
04h WORD segment of 24-byte protocol buffer
06h WORD offset of 24-byte protocol buffer
--------e-92E10C-----------------------------
INT 92 - Da Vinci eMail Dispatcher - "NetReadQueue"
AX = E10Ch
BX = size of parameter block in words (0002h)
CX:DX -> parameter block (see #3116)
Return: AX = 0001h
SeeAlso: AX=E10Bh

Format of Da Vinci eMail "NetReadQueue" parameter block:
Offset Size Description (Table 3116)
00h WORD Segment of 128 byte node address buffer
02h WORD Offset of 128 byte node address buffer
--------e-92E10D-----------------------------
INT 92 - Da Vinci eMail Dispatcher - "NetSubmitName"
AX = E10Dh
BX = size of parameter block in words (0006h)
CX:DX -> parameter block (see #3117)
Return: AX = status (see #3105)
Desc: this function is used to verify username/password
SeeAlso: AX=E10Eh

Format of Da Vinci eMail "NetSubmitName" parameter block:
Offset Size Description (Table 3117)
00h WORD segment of uppercase password string
02h WORD offset of uppercase password string
04h WORD segment of uppercase username string
06h WORD offset of uppercase username string
08h WORD segment of "DVSEMAIL"
0Ah WORD offset of "DVSEMAIL"
--------e-92E10E-----------------------------
INT 92 - Da Vinci eMail Dispatcher - "NetRemoveName"
AX = E10Eh
BX = size of parameter block in words (0004h)
CX:DX -> parameter block (see #3118)
Return: AX = 0001h
Desc: this function is used to remove a username
SeeAlso: AX=E10Dh

Format of Da Vinci eMail "NetRemoveName" parameter block:
Offset Type Description (Table 3118)
00h WORD segment of uppercase username
02h WORD offset of uppercase username
04h WORD segment of "DVSEMAIL"
06h WORD offset of "DVSEMAIL"
--------e-92E10FBX0000-----------------------
INT 92 - Da Vinci eMail Dispatcher - IS ANYONE THERE? QUERY
AX = E10Fh
BX = 0000h
CX:DX ignored
Return: AX = 0001h
SeeAlso: AX=E180h
--------e-92E110-----------------------------
INT 92 - Da Vinci eMail Dispatcher - "NetGetAltRoute"
AX = E110h
BX = size of parameter block in words (0006h)
CX:DX -> parameter block (see #3119)
Return: AX = 0001h
SeeAlso: AX=E111h,AX=E113h

Format of Da Vinci eMail "NetGetAltRoute" parameter block:
Offset Size Description (Table 3119)
00h 6 WORDs ???
--------e-92E111-----------------------------
INT 92 - Da Vinci eMail Dispatcher - "NetDeleteAltRoutes"
AX = E111h
BX = size of parameter block in words (0004h)
CX:DX -> parameter block (see #3120)
Return: AX = 0001h
SeeAlso: AX=E110h,AX=E113h

Format of Da Vinci eMail "NetDeleteAltRoutes" parameter block:
Offset Size Description (Table 3120)
00h 4 WORDs ???
--------e-92E112-----------------------------
INT 92 - Da Vinci eMail Dispatcher - "NetChangePassword"
AX = E112h
BX = size of parameter block in words (0008h)
CX:DX -> parameter block (see #3121)
Return: AX = 0001h
SeeAlso: AX=E180h

Format of Da Vinci eMail "NetChangePassword" parameter block:
Offset Size Description (Table 3121)
00h 8 WORDs ???
--------e-92E113-----------------------------
INT 92 - Da Vinci eMail Dispatcher - "NetSetAltRoute"
AX = E113h
BX = size of parameter block in words (0008h)
CX:DX -> parameter block (see #3122)
Return: AX = 0001h
SeeAlso: AX=E110h,AX=E111h

Format of Da Vinci eMail "NetSetAltRoute" parameter block:
Offset Size Description (Table 3122)
00h 8 WORDs ???
--------e-92E175-----------------------------
INT 92 - Da Vinci eMail Dispatcher - BECOME MICRO TSR
AX = E175h
Return: AX = 0012h
BX = PSP
SeeAlso: AX=E180h
--------e-92E180-----------------------------
INT 92 - Da Vinci eMail Dispatcher - INSTALLATION CHECK
AX = E180h
Return: AX = 0012h if installed
ES:DX -> '$'-terminated driver information string
SeeAlso: AX=E102h,AX=E105h,AX=E10Fh,AX=E175h
--------r-93---------------------------------
INT 93 - IBM ROM BASIC - used while in interpreter
Notes: called by ROM BASIC
BASIC.COM/BASICA.COM do not restore vector on termination
--------N-93---------------------------------
INT 93 - IBM TOKEN RING ADAPTER - ???
SeeAlso: INT 81"TOKEN RING",INT 91"TOKEN RING"
--------r-94---------------------------------
INT 94 - IBM ROM BASIC - used while in interpreter
Notes: called by ROM BASIC, but pointed at IRET by BASIC.COM/BASICA.COM
BASIC.COM/BASICA.COM do not restore vector on termination
--------s-94----SI0000-----------------------
INT 94 u - PCM driver - INITIALIZE SOUND
SI = 0000h
ES:BX -> parameters
Return: ???
Program: PCM.COM is a sound driver for Media Vision's Pro Audio Spectrum
sound boards
Note: the installation check consists of testing for the signature string
"PCMDRIVER" immediately preceding the interrupt handler; the word
preceding the signature gives the PCM driver's version
SeeAlso: SI=0001h,SI=0002h,SI=0003h,SI=0004h,SI=0005h,SI=000Ah
Index: installation check;PCM driver|PCM.COM;installation check
Index: PCM driver;installation check
--------s-94----SI0001-----------------------
INT 94 u - PCM driver - INITIALIZE PCM
SI = 0001h
ES:BX -> parameters
Return: ???
SeeAlso: SI=0000h,SI=0002h,SI=0003h,SI=000Ah
--------s-94----SI0002-----------------------
INT 94 u - PCM driver - INITIALIZE PCM INFO
SI = 0002h
ES:BX -> parameters (see #3123)
Return: ???
SeeAlso: SI=0000h,SI=0001h,SI=0003h,SI=000Ah

Format of PCM driver function 0002h parameters:
Offset Size Description (Table 3123)
00h DWORD rate
04h WORD channel number
06h WORD "comp"
08h WORD "dsize"
--------s-94----SI0003-----------------------
INT 94 u - PCM driver - INITIALIZE DMA BUFFER
SI = 0003h
ES:BX -> parameters (see #3124)
Return: ???

SeeAlso: SI=0000h,SI=000Ah,SI=000Bh

Format of PCM driver function 0003h parameters:
Offset Size Description (Table 3124)
00h DWORD -> DMA buffer
04h WORD size of DMA buffer
06h WORD number of divisions
--------s-94----SI0004-----------------------
INT 94 u - PCM driver - INITIALIZE USER FUNCTION
SI = 0004h
ES:BX -> parameters (see #3125)
Return: ???
SeeAlso: SI=0000h,SI=0001h

Format of PCM driver function 0004h parameters:
Offset Size Description (Table 3125)
00h DWORD -> user function
--------s-94----SI0005-----------------------
INT 94 u - PCM driver - BEGIN AUDIO PLAY
SI = 0005h
Return: ???
SeeAlso: SI=0000h,SI=0006h,SI=0007h,SI=0009h
--------s-94----SI0006-----------------------
INT 94 u - PCM driver - BEGIN AUDIO RECORD
SI = 0006h
Return: ???
SeeAlso: SI=0005h,SI=0007h,SI=0009h
--------s-94----SI0007-----------------------
INT 94 u - PCM driver - PAUSE AUDIO PLAY/RECORD
SI = 0007h
Return: ???
SeeAlso: SI=0005h,SI=0006h,SI=0008h
--------s-94----SI0008-----------------------
INT 94 u - PCM driver - RESUME AUDIO PLAY/RECORD
SI = 0008h
Return: ???
SeeAlso: SI=0007h
--------s-94----SI0009-----------------------
INT 94 u - PCM driver - STOP AUDIO PLAY/RECORD
SI = 0009h
Return: ???
SeeAlso: SI=0005h,SI=0006h,SI=0007h
--------s-94----SI000A-----------------------
INT 94 u - PCM driver - UNHOOK INTERRUPTS AND TURN OFF DMA
SI = 000Ah
Return: ???
SeeAlso: SI=0000h,SI=0001h,SI=0003h
Index: uninstall;PCM driver
--------s-94----SI000B-----------------------
INT 94 u - PCM driver - FIND VALID DMA BUFFER IN HUGE MEMORY BLOCK
SI = 000Bh
ES:BX -> parameters (see #3126)
Return: ???
SeeAlso: SI=0003h

Format of PCM driver functio 000Bh parameters:
Offset Size Description (Table 3126)
00h DWORD -> memory block to contain DMA buffer
04h WORD desired size of DMA buffer
--------s-94----SI000D-----------------------
INT 94 u - Media Vision PCM.COM - GET STATUS
SI = 000Dh
Return: AX = status (0000h = waiting) (see #3127)

Bitfields for PCM.COM status:
Bit(s) Description (Table 3127)
0 playing
1 recording
2 SBplaying
3 SBrecording
14 SBpaused
15 paused
--------s-94----SI8000-----------------------
INT 94 u - Media Vision PCM.COM - GET INTERNAL DMA BUFFER ADDRESS
SI = 8000h
Return: DX:AX -> DMA buffer
Program: PCM.COM is a superset of the standard PCM driver which provides
additional functions for fine control of the driver
Note: the installation check for the Media Vision PCM.COM "shark" functions
consists of testing for the signature "PCM-SHARK" at offset 107h in
the INT 94 handler's segment
SeeAlso: SI=8001h,SI=8004h
Index: installation check;Media Vision PCM.COM|PCM.COM;installation check
Index: Media Vision PCM.COM;"shark" functions
--------s-94----SI8001-----------------------
INT 94 u - Media Vision PCM.COM - GET INTERNAL DMA BUFFER SIZE AND DIVISIONS
SI = 8001h
Return: AX = DMA buffer size
DX = divisions
SeeAlso: SI=8000h
--------s-94----SI8002-----------------------
INT 94 u - Media Vision PCM.COM - CHECK BOARD ADDRESS
SI = 8002h
Return: AX = status
0000h if board not at specified I/O address
other if board found
Note: the I/O address is specified by ORing the base I/O port shifted left
four bits into SI before calling INT 94
SeeAlso: SI=8000h
--------s-94----SI8004-----------------------
INT 94 u - Media Vision PCM.COM - GET INTERNAL NOTE BUFFER
SI = 8004h
Return: AX = offset of note buffer (segment = segment of internal DMA buffer)
DX = size of buffer in note structures
SeeAlso: SI=8000h
--------s-94----SI8005-----------------------
INT 94 u - Media Vision PCM.COM - SINGLE-STEP QUEUE
SI = 8005h
Return: ???
--------s-94----SI8011-----------------------
INT 94 u - Media Vision PCM.COM - INITIALIZE
SI = 8011h
ES:BX -> "iobf91" structure
Return: ???
--------s-94----SI8012-----------------------
INT 94 u - Media Vision PCM.COM - LOAD SOUND FOR LATER PLAY THROUGH KEYBOARD
SI = 8012h
ES:BX -> "i94f92buf" structure
Return: ???
SeeAlso: SI=8013h,SI=8014h
--------s-94----SI8013-----------------------
INT 94 u - Media Vision PCM.COM - GET INTERNAL SOUND USAGE
SI = 8013h
Return: AX = number of sounds used
DX = maximum handles
--------s-94----SI8014-----------------------
INT 94 u - Media Vision PCM.COM - GET DATA FOR SPECIFIED SOUND
SI = 8014h
ES:BX -> "i94f92buf" structure to be filled in
sound number field set to desired sound
Return: AX = status
0000h successful
FFFFh sound number out of range
SeeAlso: SI=8012h,SI=8013h
--------s-94----SI8015-----------------------
INT 94 u - Media Vision PCM.COM - GET/SET INTERNAL DMA BUFFER
SI = 8015h
ES:BX -> DMA info structure (see #3128)
Return: ???

Format of PCM.COM DMA info structure:
Offset Size Description (Table 3128)
00h DWORD -> DMA buffer (offset FFFFh = return current buffer info)
04h WORD DMA buffer size
06h WORD divisions
--------s-94----SI8016-----------------------
INT 94 u - Media Vision PCM.COM - SIMULATE DOUBLE-SHIFT HOTKEY
SI = 8016h
AX = hotkey number (01h-08h)
Return: ???
SeeAlso: AL=02h/SI=8017h
--------s-94--01SI8017-----------------------
INT 94 u - Media Vision PCM.COM - CTRL-G INTERCEPT
AL = 01h
SI = 8017h
AH = new state (00h off, 01h on)
Return: ???
SeeAlso: AL=02h/SI=8017h
--------s-94--02SI8017-----------------------
INT 94 u - Media Vision PCM.COM - DOUBLE-SHIFT-HOTKEY SOUND FEATURE
AL = 02h
SI = 8017h
AH = new state (00h off, 01h on)
Return: ???
--------s-94--04SI8017-----------------------
INT 94 u - Media Vision PCM.COM - RANDOM SOUND FEATURE
AL = 04h
SI = 8017h
AH = new state
00h off
01h on
CX = minimum delay
DX = maximum delay
Return: ???
--------s-94--08SI8017-----------------------
INT 94 u - Media Vision PCM.COM - NO ACTIVITY FEATURE
AL = 08h
SI = 8017h
AH = new state
00h off
01h on
DX:CX = delay
Return: ???
SeeAlso: AL=10h/SI=8017h
--------s-94--10SI8017-----------------------
INT 94 u - Media Vision PCM.COM - TIMER CONTROL
AL = 10h
SI = 8017h
AH = timer options (see #3129)
DX:CX = delay if AH bit 7 set (one-shot if DX bit 15 set)
Return: ???
SeeAlso: AL=08h/SI=8017h

Bitfields for PCM.COM timer options:
Bit(s) Description (Table 3129)
7 set timer
6 timer active (timer turned off if clear)
5-0 timer number
--------s-94----SI8018-----------------------
INT 94 u - Media Vision PCM.COM - GET INFO
SI = 8018h
AL = what to get
00h "F92state"
01h "F92bkgd"
02h "I10timer"
03h "I08state"
Return: DX:AX -> desired information
--------r-95---------------------------------
INT 95 - IBM ROM BASIC - used while in interpreter
Notes: called by ROM BASIC
BASIC.COM/BASICA.COM do not restore vector on termination
--------r-95---------------------------------
INT 95 - APL*PLUS/PC - DETERMINE R= SPACE
Note: use only when the R= option is invoked on entering APL
--------r-96---------------------------------
INT 96 - IBM ROM BASIC - used while in interpreter
Notes: called by ROM BASIC
BASIC.COM/BASICA.COM do not restore vector on termination
--------r-97---------------------------------
INT 97 - IBM ROM BASIC - used while in interpreter
Notes: called by ROM BASIC
BASIC.COM/BASICA.COM do not restore vector on termination
--------r-98---------------------------------
INT 98 - IBM ROM BASIC - used while in interpreter
Notes: called by ROM BASIC, but pointed at IRET by BASIC.COM/BASICA.COM
BASIC.COM/BASICA.COM do not restore vector on termination
--------r-99---------------------------------
INT 99 - IBM ROM BASIC - used while in interpreter
Notes: called by ROM BASIC, but pointed at IRET by BASIC.COM/BASICA.COM
BASIC.COM/BASICA.COM do not restore vector on termination
--------r-9A---------------------------------
INT 9A - IBM ROM BASIC - used while in interpreter
Notes: called by ROM BASIC, but pointed at IRET by BASIC.COM/BASICA.COM
BASIC.COM/BASICA.COM do not restore vector on termination
SeeAlso: INT 80"BASIC",INT 99,INT 9B
--------r-9B---------------------------------
INT 9B - IBM ROM BASIC - used while in interpreter
Notes: called by ROM BASIC, but pointed at IRET by BASIC.COM/BASICA.COM
BASIC.COM/BASICA.COM do not restore vector on termination
SeeAlso: INT 80"BASIC",INT 9A,INT 9C"BASIC"
--------r-9C---------------------------------
INT 9C - IBM ROM BASIC - used while in interpreter
Notes: called by ROM BASIC, but pointed at IRET by BASIC.COM/BASICA.COM
BASIC.COM/BASICA.COM do not restore vector on termination
SeeAlso: INT 80"BASIC",INT 9B,INT 9D"BASIC"
--------v-9C---------------------------------
INT 9C - VIRUS - "INT13" - ORIGINAL INT 13h VECTOR
SeeAlso: INT 8B"VIRUS",INT 9D"VIRUS",INT 9E"VIRUS",INT 9F"VIRUS"
--------r-9D---------------------------------
INT 9D - IBM ROM BASIC - used while in interpreter
Notes: called by ROM BASIC, but pointed at IRET by BASIC.COM/BASICA.COM
BASIC.COM/BASICA.COM do not restore vector on termination
SeeAlso: INT 80"BASIC",INT 9C"BASIC",INT 9E"BASIC"
--------v-9D---------------------------------
INT 9D - VIRUS - "INT13" - ROM INT 13h ENTRY POINT
Note: this vector is used by the virus to store the result of a call to
INT 2F/AH=13h
SeeAlso: INT 2F/AH=13h,INT 9C"VIRUS",INT 9E"VIRUS",INT 9F"VIRUS"
--------r-9E---------------------------------
INT 9E - IBM ROM BASIC - used while in interpreter
Notes: called by ROM BASIC, but pointed at IRET by BASIC.COM/BASICA.COM
BASIC.COM/BASICA.COM do not restore vector on termination
SeeAlso: INT 80"BASIC",INT 9D"BASIC",INT 9F"BASIC"
--------v-9E---------------------------------
INT 9E - VIRUS - "INT13" - ORIGINAL INT 21h VECTOR
SeeAlso: INT 70"VIRUS",INT 9C"VIRUS",INT 9D"VIRUS",INT E0"VIRUS"
--------r-9F---------------------------------
INT 9F - IBM ROM BASIC - used while in interpreter
Notes: called by ROM BASIC
BASIC.COM/BASICA.COM do not restore vector on termination
SeeAlso: INT 80"BASIC",INT 9D"BASIC",INT A0"BASIC"
--------v-9F---------------------------------
INT 9F - VIRUS - "INT13" - STORAGE FOR USER INT 13h VECTOR
Note: while it is infecting a file, the INT13 virus grabs INT 13 and uses
this interrupt to store the existing INT 13 vector for later
restoration
SeeAlso: INT 9C"VIRUS",INT 9D"VIRUS",INT D3"VIRUS"
--------r-A0---------------------------------
INT A0 - IBM ROM BASIC - used while in interpreter
Notes: called by ROM BASIC
BASIC.COM/BASICA.COM do not restore vector on termination
SeeAlso: INT 80"BASIC",INT 9F"BASIC",INT A1"BASIC"
--------r-A0---------------------------------
INT A0 - APL*PLUS/PC - USED BY APL/GSS*CGI GRAPHICS INTERFACE
SeeAlso: INT 59
--------r-A1---------------------------------
INT A1 - IBM ROM BASIC - used while in interpreter
Notes: called by ROM BASIC, but pointed at IRET by BASIC.COM/BASICA.COM
BASIC.COM/BASICA.COM do not restore vector on termination
SeeAlso: INT 80"BASIC",INT A0"BASIC",INT A2"BASIC"
--------r-A2---------------------------------
INT A2 - IBM ROM BASIC - used while in interpreter
Notes: called by ROM BASIC
BASIC.COM/BASICA.COM do not restore vector on termination
SeeAlso: INT 80"BASIC",INT A1"BASIC",INT A3"BASIC"
--------r-A3---------------------------------
INT A3 - IBM ROM BASIC - used while in interpreter
Notes: called by ROM BASIC
BASIC.COM/BASICA.COM do not restore vector on termination
SeeAlso: INT 80"BASIC",INT A2"BASIC",INT A4"BASIC"
--------r-A4---------------------------------
INT A4 - IBM ROM BASIC - used while in interpreter
Notes: called by ROM BASIC, but pointed at IRET by BASIC.COM/BASICA.COM
BASIC.COM/BASICA.COM do not restore vector on termination
SeeAlso: INT 80"BASIC",INT A3"BASIC",INT A5"BASIC"
--------U-A4---------------------------------
INT A4 U - Right Hand Man - API
AH = function number (v3.3 supports functions 00h-52h)
Return: CF set on error
CF clear if successful
Program: Right Hand Man is a TSR desk-top utility originally by Red E Products
which has evolved into Futurus Team
Note: this interrupt is only hooked while popped up
SeeAlso: INT 2F/AX=A4E0h
--------r-A5---------------------------------
INT A5 - IBM ROM BASIC - used while in interpreter
Notes: called by ROM BASIC, but pointed at IRET by BASIC.COM/BASICA.COM
BASIC.COM/BASICA.COM do not restore vector on termination
SeeAlso: INT 80"BASIC",INT A4"BASIC",INT A6"BASIC"
--------r-A6---------------------------------
INT A6 - IBM ROM BASIC - used while in interpreter
Notes: called by ROM BASIC
BASIC.COM/BASICA.COM do not restore vector on termination
SeeAlso: INT 80"BASIC",INT A5"BASIC",INT A7"BASIC"
--------r-A7---------------------------------
INT A7 - IBM ROM BASIC - used while in interpreter
Notes: called by ROM BASIC
BASIC.COM/BASICA.COM do not restore vector on termination
--------r-A8---------------------------------
INT A8 - IBM ROM BASIC - used while in interpreter
Notes: called by ROM BASIC
BASIC.COM/BASICA.COM do not restore vector on termination
--------r-A9---------------------------------
INT A9 - IBM ROM BASIC - used while in interpreter
Notes: called by ROM BASIC
BASIC.COM/BASICA.COM do not restore vector on termination
--------r-AA---------------------------------
INT AA - IBM ROM BASIC - used while in interpreter
Notes: called by ROM BASIC, but pointed at IRET by BASIC.COM/BASICA.COM
BASIC.COM/BASICA.COM do not restore vector on termination
--------r-AB---------------------------------
INT AB - IBM ROM BASIC - used while in interpreter
Notes: called by ROM BASIC
BASIC.COM/BASICA.COM do not restore vector on termination
--------r-AC---------------------------------
INT AC - IBM ROM BASIC - used while in interpreter
Notes: called by ROM BASIC
BASIC.COM/BASICA.COM do not restore vector on termination
--------r-AD---------------------------------
INT AD - IBM ROM BASIC - used while in interpreter
Notes: called by ROM BASIC
BASIC.COM/BASICA.COM do not restore vector on termination
--------r-AE---------------------------------
INT AE - IBM ROM BASIC - used while in interpreter
Notes: called by ROM BASIC, but pointed at IRET by BASIC.COM/BASICA.COM
BASIC.COM/BASICA.COM do not restore vector on termination
--------r-AF---------------------------------
INT AF - IBM ROM BASIC - used while in interpreter
Notes: called by ROM BASIC
BASIC.COM/BASICA.COM do not restore vector on termination
--------r-B0---------------------------------
INT B0 - IBM ROM BASIC - used while in interpreter
Notes: called by ROM BASIC, but pointed at IRET by BASIC.COM/BASICA.COM
BASIC.COM/BASICA.COM do not restore vector on termination
--------r-B1---------------------------------
INT B1 - IBM ROM BASIC - used while in interpreter
Notes: called by ROM BASIC, but pointed at IRET by BASIC.COM/BASICA.COM
BASIC.COM/BASICA.COM do not restore vector on termination
--------r-B2---------------------------------
INT B2 - IBM ROM BASIC - used while in interpreter
Notes: called by ROM BASIC
BASIC.COM/BASICA.COM do not restore vector on termination
--------r-B3---------------------------------
INT B3 - IBM ROM BASIC - used while in interpreter
Notes: called by ROM BASIC, but pointed at IRET by BASIC.COM/BASICA.COM
BASIC.COM/BASICA.COM do not restore vector on termination
--------U-B370-------------------------------
INT B3 - ZIPKEY - GET VERSION
AH = 70h
Return: AH = major version
AL = minor version
CL = number of states and territories in current database
DH = year of current database - 1900
DL = month of current database's file date
Program: ZIPKEY is a resident ZIPCODE database by Eric Isaacson
Note: if installed, the string "ZIPKEY" is present at offset 75h in the
interrupt handler's segment, and the byte at 7Bh contains the API
version number (00h for v1.x, 01h for v2.0)
--------U-B371-------------------------------
INT B3 - ZIPKEY - CONVERT TWO-LETTER ABBREVIATION TO STATE CODE
AH = 71h
BX = abbreviation, in either case (first letter in BL)
Return: CF set on error
AL = FFh
CF clear if successful
AL = ZIPKEY state code
SeeAlso: AH=72h
--------U-B372-------------------------------
INT B3 - ZIPKEY - CONVERT STATE CODE TO TWO-LETTER ABBREVIATION
AH = 72h
BL = ZIPKEY state code
Return: CF set on error
AX destroyed
CF clear if successful
AX = abbreviation, in upper case
SeeAlso: AH=71h,AH=73h
--------U-B373-------------------------------
INT B3 - ZIPKEY - CONVERT STATE CODE TO STATE NAME
AH = 73h
BL = ZIPKEY state code
ES:DI -> buffer for name
Return: CF set on error
AX destroyed
CF clear if successful
ES:DI points one byte beyond end of name
SeeAlso: AH=72h
--------U-B374-------------------------------
INT B3 - ZIPKEY - CONVERT ZIPCODE TO ASCII DIGITS
AH = 74h
DX = zipcode region (0-999)
CH = last two digits of zipcode (0-99)
ES:DI -> buffer
Return: CF set on error
AX destroyed
CF clear if successful
ES:DI points one byte beyond end of digit string
--------U-B375-------------------------------
INT B3 - ZIPKEY - LOOK UP STATE CODE FOR ZIPCODE
AH = 75h
DX = zipcode region (0-999)
CH = last two digits of zipcode (0-99)
Return: CF set on error (zipcode not found)
AL = suggested state code, FFh if none
CF clear if successful
AL = ZIPKEY state code
BX = area code (v2.0+)

SeeAlso: AH=76h,AH=79h
--------U-B376-------------------------------
INT B3 - ZIPKEY - LOOK UP CITY AND STATE FOR ZIPCODE
AH = 76h
DX = zipcode region (0-999)
CH = last two digits of zipcode (0-99)
ES:DI -> buffer for name
Return: CF set on error
AL = suggested state code, FFh if none
ES:DI buffer filled with suggested city name
CF clear if successful
AL = ZIPKEY state code
BX = area code (v2.0+)
ES:DI points one byte beyond end of name
SeeAlso: AH=75h,AH=78h,AH=7Eh
--------U-B377-------------------------------
INT B3 - ZIPKEY - PLAY BACK EXIT KEY FOR ENTRY WITH GIVEN ZIPCODE
AH = 77h
DX = zipcode region (0-999)
CH = last two digits of zipcode (0-99)
BX = 16-bit BIOS keycode for a defined ZIPKEY alternate exit key
Return: CF set on error
AX destroyed
CF clear if successful
zipcode specification as defined by the BX keystroke is placed in
keyboard buffer, as if the user had popped up ZIPKEY and exited
by pressing the key specified by BX
--------U-B378-------------------------------
INT B3 - ZIPKEY - LOOK UP ZIPCODES FOR A GIVEN STATE AND CITY
AH = 78h
BL = ZIPKEY state code
DS:SI -> city name, terminated with 0Dh if complete name, 00h if prefix
Return: BH = number of matching entries (set to 51 if more than 50)
DX = zipcode region of first match (0-999)
CL = last two digits of first zipcode in the range (0-99)
CH = last two digits of last zipcode in the range (0-99)
AX destroyed
SeeAlso: AH=79h,AH=7Ah
--------U-B379-------------------------------
INT B3 - ZIPKEY - LOOK UP ZIPCODES FOR A GIVEN CITY
AH = 79h
BL = ZIPKEY state code of first state to search
DS:SI -> city name, terminated with 0Dh if complete name, 00h if prefix
Return: AL = ZIPKEY state code of first matching state
BH = number of matching entries (set to 51 if more than 50)
DX = zipcode region of first match (0-999)
CL = last two digits of first zipcode in first range (0-99)
CH = last two digits of last zipcode in first range (0-99)
Note: to find all matching cities, repeat search with BL set to one more than
the returned AL
SeeAlso: AH=78h,AH=7Ah
--------U-B37A-------------------------------
INT B3 - ZIPKEY - FETCH AN ENTRY FROM A PREVIOUS LOOKUP
AH = 7Ah
BL = case number (0 to one less than value returned in BH by lookup)
Return: AL = ZIPKEY state code
DX = zipcode region (0-999)
CL = last two digits of first zipcode in the range (0-99)
CH = last two digits of last zipcode in the range (0-99)
SeeAlso: AH=78h,AH=79h
--------U-B37B-------------------------------
INT B3 - ZIPKEY - GET VALUES NEEDED TO SAVE ZIPKEY CONTEXT
AH = 7Bh
Return: BL = maximum number of characters for a city name
BH = ZIPKEY state code for last city-name search, or FFh if none
CX:DX = internal code identifying last city search
AX destroyed
SeeAlso: AH=7Ch
--------U-B37C-------------------------------
INT B3 - ZIPKEY - RESTORE ZIPKEY CONTEXT
AH = 7Ch
BL = maximum number of characters for a city name
BH = ZIPKEY state code for last city-name search, or FFh if none
CX:DX = internal code returned by AH=7Bh
Return: CF set on error
CF clear if successful
AX destroyed
SeeAlso: AH=7Bh
--------U-B37D-------------------------------
INT B3 - ZIPKEY - REQUEST POP UP
AH = 7Dh
BL = index number to simulate pressing a hotkey
FFh for immediate popup with no playback on return
Return: CF set on error
AL = error code
FDh already busy with another request
FEh illegal function
CF clear if successful
AX destroyed
window popped up and was closed by the user
SeeAlso: AH=70h
--------U-B37E-------------------------------
INT B3 - ZIPKEY - GET NAME OF PRIMARY CITY FOR A ZIPCODE REGION
AH = 7Eh
DX = zipcode region (0-999)
ES:DI -> buffer for name
Return: CF set on error
AL = FFh region does not exist
CF clear if successful
AL = ZIPKEY state code
ES:DI points one byte beyond end of name
SeeAlso: AH=76h
--------U-B37F-------------------------------
INT B3 - ZIPKEY - ENABLE/DISABLE HOTKEYS
AH = 7Fh
BL = function
00h turn off hotkeys
01h turn on hotkeys
02h return hotkey status
03h toggle hotkey status
Return: AL = hotkey status
00h off
01h on
--------U-B380-------------------------------
INT B3 - ZIPKEY v2.0+ - DETERMINE STATE FOR AREA CODE
AH = 80h
BX = telephone area code (decimal)
Return: CF clear if successful
AL = ZIPKEY state code
DX = first ZIP region for state (03E8h if Canada)
CX = number of ZIP regions in state
CF set on error
AL = FFh
DX = 03E9h
--------r-B4---------------------------------
INT B4 - IBM ROM BASIC - used while in interpreter
Notes: called by ROM BASIC
BASIC.COM/BASICA.COM do not restore vector on termination
--------r-B4---------------------------------
INT B4 - StackMan - REQUEST NEW STACK
Return: SS:SP -> new stack
Program: StackMan is a freeware stack manager by Franz Veldman of ESaSS B.V.
which functions as a replacement for the DOS STACK= command as well
as permitting multiple TSRs to share a pool of stack space
Note: the installation check consists of testing for the string "STACKXXX" at
offset 0Ah from the interrupt handler
SeeAlso: INT 2F/AX=C9FFh,INT B5"STACKMAN"
Index: installation check;STACKMAN
--------r-B5---------------------------------
INT B5 - IBM ROM BASIC - used while in interpreter
Notes: called by ROM BASIC, but pointed at IRET by BASIC.COM/BASICA.COM
BASIC.COM/BASICA.COM do not restore vector on termination
SeeAlso: INT 80"BASIC",INT B4"BASIC",INT B6"BASIC"
--------r-B5---------------------------------
INT B5 - StackMan - RESTORE ORIGINAL STACK
SS:SP -> stack returned by INT B4
Return: SS:SP restored to value before INT B4
SeeAlso: INT 2F/AX=C9FFh,INT B4"StackMan"
--------m-B5---------------------------------
INT B5 U - Netroom NETSWAP4 - ???
???
Return: ???
SeeAlso: INT 31/AH=57h
--------r-B6---------------------------------
INT B6 - IBM ROM BASIC - used while in interpreter
Notes: called by ROM BASIC
BASIC.COM/BASICA.COM do not restore vector on termination
SeeAlso: INT 80"BASIC",INT B5"BASIC",INT B7"BASIC"
--------y-B6---------------------------------
INT B6 - (NOT A VECTOR!) - USED BY TBFENCE
Program: TBFence is a security program by ESaSS B.V. which transparently
encrypts floppies and optionally allows only encrypted diskettes to
be accessed
Note: the low word of this vector (0000h:02D8h) contains the segment of the
TBFence INT 13h code, which starts with the signature word E487h;
this forms the installation check
the highest byte of this vector contains the start of a FAR JMP
instruction to ???
SeeAlso: INT B7"TBFENCE"
Index: installation check;TBFence
--------r-B7---------------------------------
INT B7 - IBM ROM BASIC - used while in interpreter
Notes: called by ROM BASIC, but pointed at IRET by BASIC.COM/BASICA.COM
BASIC.COM/BASICA.COM do not restore vector on termination
SeeAlso: INT 80"BASIC",INT B6"BASIC",INT B8"BASIC"
--------y-B7---------------------------------
INT B7 - TBFENCE - ???
SeeAlso: INT B6"TBFENCE"
--------r-B8---------------------------------
INT B8 - IBM ROM BASIC - used while in interpreter
Notes: called by ROM BASIC
BASIC.COM/BASICA.COM do not restore vector on termination
SeeAlso: INT 80"BASIC",INT B7"BASIC",INT B9"BASIC"
--------r-B9---------------------------------
INT B9 - IBM ROM BASIC - used while in interpreter
Notes: called by ROM BASIC, but pointed at IRET by BASIC.COM/BASICA.COM
BASIC.COM/BASICA.COM do not restore vector on termination
--------r-BA---------------------------------
INT BA - IBM ROM BASIC - used while in interpreter
Notes: called by ROM BASIC, but pointed at IRET by BASIC.COM/BASICA.COM
BASIC.COM/BASICA.COM do not restore vector on termination
--------r-BB---------------------------------
INT BB - IBM ROM BASIC - used while in interpreter
Notes: called by ROM BASIC, but pointed at IRET by BASIC.COM/BASICA.COM
BASIC.COM/BASICA.COM do not restore vector on termination
--------r-BC---------------------------------
INT BC - IBM ROM BASIC - used while in interpreter
Notes: called by ROM BASIC, but pointed at IRET by BASIC.COM/BASICA.COM
BASIC.COM/BASICA.COM do not restore vector on termination
--------r-BD---------------------------------
INT BD - IBM ROM BASIC - used while in interpreter
Notes: called by ROM BASIC, but pointed at IRET by BASIC.COM/BASICA.COM
BASIC.COM/BASICA.COM do not restore vector on termination
--------r-BE---------------------------------
INT BE - IBM ROM BASIC - used while in interpreter
Notes: called by ROM BASIC, but pointed at IRET by BASIC.COM/BASICA.COM
BASIC.COM/BASICA.COM do not restore vector on termination
SeeAlso: INT 80"BASIC",INT BD"BASIC",INT BF"BASIC"
--------Q-BE---------------------------------
INT BE - DESQview/X - ???
Note: points at an IRET
SeeAlso: INT 15/AX=BFDEh/BX=0006h,INT 63"DESQview"
--------r-BF---------------------------------
INT BF - IBM ROM BASIC - used while in interpreter
Notes: called by ROM BASIC, but pointed at IRET by BASIC.COM/BASICA.COM
BASIC.COM/BASICA.COM do not restore vector on termination
SeeAlso: INT 80"BASIC",INT BE"BASIC",INT C0"BASIC"
--------r-C0---------------------------------
INT C0 - IBM ROM BASIC - used while in interpreter
Notes: called by ROM BASIC, but pointed at IRET by BASIC.COM/BASICA.COM
BASIC.COM/BASICA.COM do not restore vector on termination
SeeAlso: INT 80"BASIC",INT BF"BASIC",INT C1"BASIC"
--------d-C0---------------------------------
INT C0 - AMI BIOS - DRIVE 0 DATA
Note: this vector is used by some AMI BIOSes to store the first four bytes
of the hard disk parameter table
SeeAlso: INT 41,INT 60"Adaptec",INT C1"AMI",INT C2"AMI",INT C3"AMI",INT C4"AMI"
--------r-C1---------------------------------
INT C1 - IBM ROM BASIC - used while in interpreter
Notes: called by ROM BASIC, but pointed at IRET by BASIC.COM/BASICA.COM
BASIC.COM/BASICA.COM do not restore vector on termination
SeeAlso: INT 80"BASIC",INT C0"BASIC",INT C2"BASIC"
--------d-C1---------------------------------
INT C1 - AMI BIOS - DRIVE 0 DATA
Note: this vector is used by some AMI BIOSes to store the second four bytes
of the hard disk parameter table
SeeAlso: INT 41,INT 60"Adaptec",INT C0"AMI",INT C2"AMI",INT C3"AMI"
--------r-C2---------------------------------
INT C2 - IBM ROM BASIC - used while in interpreter
Notes: called by ROM BASIC, but pointed at IRET by BASIC.COM/BASICA.COM
BASIC.COM/BASICA.COM do not restore vector on termination
SeeAlso: INT 80"BASIC",INT C1"BASIC",INT C3"BASIC"
--------d-C2---------------------------------
INT C2 - AMI BIOS - DRIVE 0 DATA
Note: this vector is used by some AMI BIOSes to store the third four bytes
of the hard disk parameter table
SeeAlso: INT 41,INT 60"Adaptec",INT C0"AMI",INT C1"AMI",INT C3"AMI"
--------r-C3---------------------------------
INT C3 - IBM ROM BASIC - used while in interpreter
Notes: called by ROM BASIC, but pointed at IRET by BASIC.COM/BASICA.COM
BASIC.COM/BASICA.COM do not restore vector on termination
SeeAlso: INT 80"BASIC",INT C2"BASIC",INT C4"BASIC"
--------d-C3---------------------------------
INT C3 - AMI BIOS - DRIVE 0 DATA
Note: this vector is used by some AMI BIOSes to store the final four bytes
of the hard disk parameter table
SeeAlso: INT 41,INT 60"Adaptec",INT C0"AMI",INT C1"AMI",INT C2"AMI"
--------r-C4---------------------------------
INT C4 - IBM ROM BASIC - used while in interpreter
Notes: called by ROM BASIC, but pointed at IRET by BASIC.COM/BASICA.COM
BASIC.COM/BASICA.COM do not restore vector on termination
SeeAlso: INT 80"BASIC",INT C3"BASIC",INT C5"BASIC"
--------d-C4---------------------------------
INT C4 - AMI BIOS - DRIVE 1 DATA
Note: this vector is used by some AMI BIOSes to store the first four bytes
of the second hard disk's parameter table
SeeAlso: INT 46,INT 64"Adaptec",INT C0"AMI",INT C5"AMI",INT C6"AMI",INT C7"AMI"
--------r-C5---------------------------------
INT C5 - IBM ROM BASIC - used while in interpreter
Notes: called by ROM BASIC
BASIC.COM/BASICA.COM do not restore vector on termination
SeeAlso: INT 80"BASIC",INT C4"BASIC",INT C6"BASIC"
--------d-C5---------------------------------
INT C5 - AMI BIOS - DRIVE 1 DATA
Note: this vector is used by some AMI BIOSes to store the second four bytes
of the second hard disk's parameter table
SeeAlso: INT 46,INT 64"Adaptec",INT C0"AMI",INT C4"AMI",INT C6"AMI",INT C7"AMI"
--------r-C6---------------------------------
INT C6 - IBM ROM BASIC - used while in interpreter
Notes: called by ROM BASIC, but pointed at IRET by BASIC.COM/BASICA.COM
BASIC.COM/BASICA.COM do not restore vector on termination
SeeAlso: INT 80"BASIC",INT C5"BASIC",INT C7"BASIC"
--------r-C6---------------------------------
INT C6 - APL*PLUS/PC - IDENTICAL TO INT 86
Note: STSC moved its interrupts from 86h-8Ch to C6h-CCh, but did not delete
the older interrupts
SeeAlso: INT 86"APL"
--------d-C6---------------------------------
INT C6 - AMI BIOS - DRIVE 1 DATA
Note: this vector is used by some AMI BIOSes to store the third four bytes
of the second hard disk's parameter table
SeeAlso: INT 46,INT 64"Adaptec",INT C0"AMI",INT C4"AMI",INT C5"AMI",INT C7"AMI"
--------r-C7---------------------------------
INT C7 - IBM ROM BASIC - used while in interpreter
Notes: called by ROM BASIC, but pointed at IRET by BASIC.COM/BASICA.COM
BASIC.COM/BASICA.COM do not restore vector on termination
SeeAlso: INT 80"BASIC",INT C6"BASIC",INT C8"BASIC"
--------r-C7---------------------------------
INT C7 - APL*PLUS/PC - ???
Note: STSC moved its interrupts from 86h-8Ch to C6h-CCh, but did not delete
the older interrupts
SeeAlso: INT 87"APL"
--------d-C7---------------------------------
INT C7 - AMI BIOS - DRIVE 1 DATA
Note: this vector is used by some AMI BIOSes to store the final four bytes
of the second hard disk's parameter table
SeeAlso: INT 46,INT 64"Adaptec",INT C0"AMI",INT C4"AMI",INT C5"AMI",INT C6"AMI"
--------r-C8---------------------------------
INT C8 - IBM ROM BASIC - used while in interpreter
Notes: called by ROM BASIC, but pointed at IRET by BASIC.COM/BASICA.COM
BASIC.COM/BASICA.COM do not restore vector on termination
SeeAlso: INT 80"BASIC",INT C7"BASIC",INT C9"BASIC"
--------r-C8---------------------------------
INT C8 - APL*PLUS/PC - IDENTICAL TO INT 88
Note: STSC moved its interrupts from 86h-8Ch to C6h-CCh, but did not delete
the older interrupts
SeeAlso: INT 88"APL"
--------r-C9---------------------------------
INT C9 - IBM ROM BASIC - used while in interpreter
Notes: called by ROM BASIC, but pointed at IRET by BASIC.COM/BASICA.COM
BASIC.COM/BASICA.COM do not restore vector on termination
SeeAlso: INT 80"BASIC",INT C8"BASIC",INT CA"BASIC"
--------r-C9---------------------------------
INT C9 - APL*PLUS/PC - ???
Note: STSC moved its interrupts from 86h-8Ch to C6h-CCh, but did not delete
the older interrupts
SeeAlso: INT 89"APL"
--------r-CA---------------------------------
INT CA - IBM ROM BASIC - used while in interpreter
Notes: called by ROM BASIC, but pointed at IRET by BASIC.COM/BASICA.COM
BASIC.COM/BASICA.COM do not restore vector on termination
SeeAlso: INT 80"BASIC",INT C9"BASIC",INT CB"BASIC"
--------r-CA---------------------------------
INT CA - APL*PLUS/PC - PRINT SCREEN
Note: STSC moved its interrupts from 86h-8Ch to C6h-CCh, but did not delete
the older interrupts
SeeAlso: INT 8A"APL"
--------r-CB---------------------------------
INT CB - IBM ROM BASIC - used while in interpreter
Notes: called by ROM BASIC, but pointed at IRET by BASIC.COM/BASICA.COM
BASIC.COM/BASICA.COM do not restore vector on termination
SeeAlso: INT 80"BASIC",INT CA"BASIC",INT CC"BASIC"
--------r-CB---------------------------------
INT CB - APL*PLUS/PC - BEEP
Notes: STSC moved its interrupts from 86h-8Ch to C6h-CCh, but did not delete
the older interrupts
same as printing a ^G via INT 21/AH=02h
SeeAlso: INT 8B"APL"
--------r-CC---------------------------------
INT CC - IBM ROM BASIC - used while in interpreter
Notes: called by ROM BASIC, but pointed at IRET by BASIC.COM/BASICA.COM
BASIC.COM/BASICA.COM do not restore vector on termination
SeeAlso: INT 80"BASIC",INT CB"BASIC",INT CD"BASIC"
--------r-CC---------------------------------
INT CC - APL*PLUS/PC - CLEAR SCREEN MEMORY
AX = flag
0000h do not save display attributes
0001h save attributes
Note: STSC moved its interrupts from 86h-8Ch to C6h-CCh, but did not delete
the older interrupts
SeeAlso: INT 8C"APL"
--------r-CD---------------------------------
INT CD - IBM ROM BASIC - used while in interpreter
Notes: called by ROM BASIC, but pointed at IRET by BASIC.COM/BASICA.COM
BASIC.COM/BASICA.COM do not restore vector on termination
SeeAlso: INT 80"BASIC",INT CC"BASIC",INT CE"BASIC"
--------r-CD---------------------------------
INT CD - STSC APL*PLUS/PC - MAY BE USED IN FUTURE RELEASES
--------r-CE---------------------------------
INT CE - IBM ROM BASIC - used while in interpreter
Notes: called by ROM BASIC, but pointed at IRET by BASIC.COM/BASICA.COM
BASIC.COM/BASICA.COM do not restore vector on termination
SeeAlso: INT 80"BASIC",INT CD"BASIC",INT CF"BASIC"
--------r-CE---------------------------------
INT CE - STSC APL*PLUS/PC - MAY BE USED IN FUTURE RELEASES
--------r-CF---------------------------------
INT CF - IBM ROM BASIC - used while in interpreter
Notes: called by ROM BASIC, but pointed at IRET by BASIC.COM/BASICA.COM
BASIC.COM/BASICA.COM do not restore vector on termination
SeeAlso: INT 80"BASIC",INT CE"BASIC",INT D0"BASIC"
--------r-CF---------------------------------
INT CF - APL*PLUS/PC - DEFAULT LOW-RESOLUTION TIMER FOR QUAD MF FUNCTION
SeeAlso: INT E0"APL"
--------r-D0---------------------------------
INT D0 - IBM ROM BASIC - used while in interpreter
Notes: called by ROM BASIC, but pointed at IRET by BASIC.COM/BASICA.COM
BASIC.COM/BASICA.COM do not restore vector on termination
SeeAlso: INT 80"BASIC",INT CF"BASIC",INT D1"BASIC"
--------r-D0---------------------------------
INT D0 - STSC APL*PLUS/PC - MAY BE USED IN FUTURE RELEASES
--------U-D0---------------------------------
INT D0 - [not a vector!] - NJFRERAM SIGNATURE VECTOR
Program: NJFRERAM is a resident free-memory display utility by Mike "Nifty
James" Blaszczak
Note: if NJFRERAM is installed, this vector points at the signature "NJ"
Index: installation check;NJFRERAM
--------r-D1---------------------------------
INT D1 - IBM ROM BASIC - used while in interpreter
Notes: called by ROM BASIC, but pointed at IRET by BASIC.COM/BASICA.COM
BASIC.COM/BASICA.COM do not restore vector on termination
SeeAlso: INT 80"BASIC",INT D0"BASIC",INT D2"BASIC"
--------r-D1---------------------------------
INT D1 - STSC APL*PLUS/PC - MAY BE USED IN FUTURE RELEASES
--------r-D2---------------------------------
INT D2 - IBM ROM BASIC - used while in interpreter
Notes: called by ROM BASIC, but pointed at IRET by BASIC.COM/BASICA.COM
BASIC.COM/BASICA.COM do not restore vector on termination
SeeAlso: INT 80"BASIC",INT D1"BASIC",INT D3"BASIC"
--------r-D2---------------------------------
INT D2 - STSC APL*PLUS/PC - MAY BE USED IN FUTURE RELEASES
--------r-D3---------------------------------
INT D3 - IBM ROM BASIC - used while in interpreter
Notes: called by ROM BASIC, but pointed at IRET by BASIC.COM/BASICA.COM
BASIC.COM/BASICA.COM do not restore vector on termination
SeeAlso: INT 80"BASIC",INT D2"BASIC",INT D4"BASIC"
--------r-D3---------------------------------
INT D3 - STSC APL*PLUS/PC - MAY BE USED IN FUTURE RELEASES
--------v-D3---------------------------------
INT D3 - VIRUS - "Antiexe" - RELOCATED INT 13
SeeAlso: INT 9F"VIRUS"
--------r-D4---------------------------------
INT D4 - IBM ROM BASIC - used while in interpreter
Notes: called by ROM BASIC
BASIC.COM/BASICA.COM do not restore vector on termination
SeeAlso: INT 80"BASIC",INT D3"BASIC",INT D5"BASIC"
--------r-D4---------------------------------
INT D4 - STSC APL*PLUS/PC - MAY BE USED IN FUTURE RELEASES
--------O-D400-------------------------------
INT D4 O - PC-MOS/386 v5.01 - OBSOLETE FUNCTIONS
AH = 00h and 01h
Return: nothing
Desc: PC-MOS/386 v5.01 reports that these functions are no longer supported
and enters an endless loop
Program: PC-MOS/386 is a multitasking/multiuser MS-DOS-compatible operating
system by The Software Link, Inc.
--------O-D402-------------------------------
INT D4 - PC-MOS/386 v3.0+ - GET SYSTEM CONTROL BLOCK POINTER
AH = 02h
Return: AX = 0000h
ES:BX -> System Control Block in V86 mode (see #3130)
ES:EBX -> System Control Block in native mode (see #3130)
Note: superseded by AH=26h
SeeAlso: AH=04h,AH=10h,AH=26h,AH=28h,AH=29h,AH=2Ah,INT 21/AX=3000h,INT 38

Format of PC-MOS/386 System Control Block:
Offset Size Description (Table 3130)
00h WORD pointer to first TCB in chain
02h 17 BYTEs reserved
13h WORD pointer to current task's TCB
15h WORD pointer to TCB of visible (console) task
--------O-D403-------------------------------
INT D4 - PC-MOS/386 v5.01 - GET/SET EXTENDED DIRECTORY INFORMATION
AH = 03h
AL = subfunction (00h get, 01h set)
DS:(E)DX -> pathname
ES:(E)BX -> 10-byte buffer for directory information (see #3131)
Return: CF clear if successful
AL = permitted access level for file (00h-03h)
ES:(E)BX -> modified buffer (AL=01h on entry)
CF set on error
AX = error code (see #0960 at INT 21/AH=59h)
Notes: BX/DX are used in V86 mode, EBX/EDX in native mode
the file class cannot be changed for files because it affects the
encryption method, but directories can have their classes changed

Format of PC-MOS/386 directory information:
Offset Size Description (Table 3131)
00h BYTE reserved (0)
01h BYTE file class ('A'-'Z' or 00h)
02h DWORD user ID of file creator
06h WORD file creation time (see #0951 at INT 21/AX=5700h)
08h WORD file creation date (see #0952 at INT 21/AX=5700h)
--------O-D404-------------------------------
INT D4 - PC-MOS/386 v3.0+ - GET TASK CONTROL BLOCK
AH = 04h
BX = task ID or FFFFh for calling task
Return: CF clear if successful
ES = segment of Task Control Block (TCB) (see #3132)
CF set on error
AX = error code (see #0960 at INT 21/AH=59h)
Note: superseded by AH=27h
SeeAlso: AH=02h,AH=27h,AH=28h,AH=29h,AH=2Ah,INT 38

Format of PC-MOS/386 Task Control Block:
Offset Size Description (Table 3132)
00h BYTE signature byte "H" if allocated from system memory pool
01h BYTE header block ID, "T" = TCB
02h WORD length of block in paragraphs
04h WORD segment address of next header block (0000h if last)
06h WORD segment address of previous header block (0000h if first)
08h WORD pointer to next TCB
0Ah WORD pointer to previous TCB
0Ch WORD pointer to associated TCB (if applicable)
0Eh WORD reserved
---TCB---
10h WORD TCB task ID
12h WORD native context save area
14h WORD start address of task
16h WORD end address of task
18h BYTE task priority
19h BYTE task time slice
1Ah BYTE "TCBWAIT" run status of task
1Bh BYTE "TCBSTAT" what the task is waiting for
1Ch DWORD address of polling routine
20h BYTE error code from last function call
21h 11 BYTEs name of currently executing task
2Ch 4 BYTEs ???
30h BYTE keyboard disabled if bit 1 set
31h BYTE current shift state and toggles
32h 2 BYTEs ???
34h BYTE current video mode
35h BYTE current video page
36h BYTE number of text columns per screen
37h BYTE number of text rows per screen
38h WORD length of video buffer
3Ah WORD video page length
3Ch WORD apge start address in video RAM
3Eh 4 WORDs current cursor positions for four screen pages
46h 8 BYTEs ???
4Eh WORD current cursor type
50h BYTE current palette setting
51h BYTE original video mode
52h BYTE start CRT row (00h or 01h)
53h BYTE video RAM in task active
54h WORD handle of video save area
56h WORD page count of video save area
58h WORD segment address of video save area
5Ah WORD poitner to first Task File Block (see #3135)
5Ch WORD pointer to first Current Directory Block (see #3138)
5Eh WORD pointer to active Current Directory Block (see #3138)
60h BYTE number of drives
61h BYTE current drive (0=A:, etc.)
62h DWORD disk transfer address
66h 4 BYTEs ???

6Ah BYTE verify flag (nonzero = on)
6Bh BYTE break flag (nonzero = on)
6Ch WORD share/lock retry count
6Eh WORD ticks between share/lock retries
70h BYTE remote printer flags (see #3133)
71h BYTE ETX/ACK delay count
72h WORD spooler segment address
74h 2 BYTEs ???
76h 3 BYTEs remote printer redirection for LPT1 through LPT3 (see #3134)
79h 2 BYTEs ???
7Bh DWORD offset of username in TCB
7Fh BYTE current output class
80h 7 BYTEs protection access rights, 2 bits per class (writeable!)
87h 122 BYTEs ???
101h BYTE TCB sleep downcounter value
102h 20 BYTEs ???
116h BYTE last scan code
...
5D0h DWORD far pointer to Device Driver Terminal's entry point
5D4h WORD offset of logical screen
5D6h WORD segment of logical screen
5D8h WORD cursor offset within page
5DAh BYTE screen columns
5DBh WORD async port number (0000h = none)
5DDh DWORD physical baudrate
5E1h 19 BYTEs reserved for Device Driver Terminal (DDT)
...
7A6h DWORD far pointer to unregister calling chain

Bitfields for PC-MOS/386 remote printer flags:
Bit(s) Description (Table 3133)
0 LPT1 to terminal
1 LPT2 to terminal
2 LPT3 to terminal
3 escape to printer pending
4 use XON/XOFF
5 use ETX/ACK
6 waiting for ACK or XON
7 transparent printing on

(Table 3134)
Values for PC-MOS/386 remote printer redirection:
00h not redirected
01h redirected to COM1
...
18h redirected to COM24
51h redirected to LPT1
52h redirected to LPT2
53h redirected to LPT3

Format of PC-MOS/386 Task File Block:
Offset Size Description (Table 3135)
00h BYTE signature byte "H" if allocated from system memory pool
01h BYTE header block ID, "F" = task file block
02h WORD length of block in paragraphs
04h WORD segment address of next header block (0000h if last)
06h WORD segment address of previous header block (0000h if first)
08h WORD pointer to next TCB
0Ah WORD pointer to previous TCB
0Ch WORD pointer to associated TCB (if applicable)
0Eh WORD reserved
---TFB---
10h WORD segment address of next TFB
12h WORD segment address of previous TFB
14h WORD segment address of TFB's Global File Block (see #3137)
16h WORD segment address of owner's PSP
18h WORD file handle
1Ah 3 BYTEs ???
1Dh DWORD file position
21h 4 BYTEs ???
25h BYTE IOCTL flags (see #3136)
26h 2 BYTEs ???

Bitfields for PC-MOS/386 IOCTL flags:
Bit(s) Description (Table 3136)
0 stdin
1 stdout
2 null device
3 clock device
4 reserved
5 ASCII mode instead of binary
6 EOF encountered on input
7 device rather than file

Format of PC-MOS/386 Global File Block:
Offset Size Description (Table 3137)
00h BYTE signature byte "H" if allocated from system memory pool
01h BYTE header block ID, "G" = global file block
02h WORD length of block in paragraphs
04h WORD segment address of next header block (0000h if last)
06h WORD segment address of previous header block (0000h if first)
08h WORD pointer to next TCB
0Ah WORD pointer to previous TCB
0Ch WORD pointer to associated TCB (if applicable)
0Eh WORD reserved
---GFB---
10h 10 BYTEs ???
1Ah WORD file attribute
1Ch BYTE ???
1Dh DWORD address of device driver
21h WORD first cluster
23h WORD time of last modification
25h WORD date of last modification
27h DWORD size of file in bytes
2Bh 11 BYTEs ???
36h 11 BYTEs device name or FCB-format filename
41h WORD segment address of TFB list
43h WORD segment address of first RLB (see #3140) (0000h = none)
45h BYTE flag: nonzero if GFB refers to character device
46h WORD address of Block Device Block (see #3139)
48h WORD sector of file's directory entry
4Ah WORD high word of file's directory entry
4Ch WORD ofsset of directory entry within sector

Format of PC-MOS/386 Current Directory Block:
Offset Size Description (Table 3138)
00h BYTE signature byte "H" if allocated from system memory pool
01h BYTE header block ID, "C" = current directory block
02h WORD length of block in paragraphs
04h WORD segment address of next header block (0000h if last)
06h WORD segment address of previous header block (0000h if first)
08h WORD pointer to next TCB
0Ah WORD pointer to previous TCB
0Ch WORD pointer to associated TCB (if applicable)
0Eh WORD reserved
---CDB---
10h BYTE drive number
11h BYTE ???
12h 64 BYTEs directory name
52h WORD first directory cluster (0000h = root)

Format of PC-MOS/386 Block Device Block:
Offset Size Description (Table 3139)
00h BYTE signature byte "H" if allocated from system memory pool
01h BYTE header block ID, "B" = block device block
02h WORD length of block in paragraphs
04h WORD segment address of next header block (0000h if last)
06h WORD segment address of previous header block (0000h if first)
08h WORD pointer to next TCB
0Ah WORD pointer to previous TCB
0Ch WORD pointer to associated TCB (if applicable)
0Eh WORD reserved
---BDB---
10h BYTE logical drive
11h BYTE unit passed to driver
12h WORD sector size
14h BYTE cluster mask
15h BYTE cluster shift count
16h WORD starting sector of first FAT
18h BYTE number of FATs
19h WORD number of root directories
1Bh WORD sector number of first data sector (cluster 0002h)
1Dh WORD number of clusters + 1 (number of highest data cluster)
1Fh BYTE number of sectors in FAT
20h WORD beginning root directory sector number
22h DWORD device driver address
26h BYTE media descriptor byte
27h 5 BYTEs ???
2Ch BYTE flag: volume > 32MB
2Dh BYTE ???
2Eh BYTE number of sectors per cluster
2Fh WORD number of clusters on device
31h WORD number of free clusters (FFFFh = unknown)
33h WORD root directory cluster number
35h WORD pointer to alias/subst string
37h WORD TCB segment address of owner (0000h = none)

Format of PC-MOS/386 Record Lock Block:
Offset Size Description (Table 3140)
00h BYTE signature byte "H" if allocated from system memory pool
01h BYTE header block ID, "R" = record lock block
02h WORD length of block in paragraphs
04h WORD segment address of next header block (0000h if last)
06h WORD segment address of previous header block (0000h if first)
08h WORD pointer to next TCB
0Ah WORD pointer to previous TCB
0Ch WORD pointer to associated TCB (if applicable)
0Eh WORD reserved
---RLB---
10h WORD segment address of owner's PSP
12h WORD segment address of Global File Block (see #3137)
14h WORD segment address of owner's Task File Block (see #3135)
16h DWORD file offset of locked region start
1Ah DWORD length of locked region
1Eh WORD owner's handle for file
--------O-D407-------------------------------
INT D4 - PC-MOS/386 v3.0+ - WAIT FOR EVENT
AH = 07h
AL = events to monitor (see #3141)
BX = number of timer ticks until timeout if AL bit 1 set
CX = bitmap of IRQs to monitor if AL bit 2 set
(bit 0 = IRQ0 .. bit 15 = IRQ15)
DX = port to monitor if AL bit 3 set
Return: CF clear if successful
AL = type of event which woke up task (see #3141)
CX = IRQ (if any) which awakened task
DX = port (if any) which awakened task
CF set on error
AX = error code (see #0960 at INT 21/AH=59h)
Note: a device driver may make this call with AL=00h, which indicates that
the driver is responsible for setting and clearing the TCBWAIT field
in the TCB. To put task to sleep, set TCBWAIT bits 2-0 to 001; to
reawaken it, set bit 1 (leaving other bits unchanged)
SeeAlso: AH=04h,INT 16/AH=00h,INT 38

Bitfields for PC-MOS/386 events to monitor:
Bit(s) Description (Table 3141)
0 keystroke
1 timeout
2 IRQ
3 port access
7 return status of user poll routine (other ignored if set)
--------O-D410-------------------------------
INT D4 - PC-MOS/386 v3.0+ - ENTER/LEAVE NATIVE 386 EXECUTION MODE
AH = 10h
AL = direction (00h return to V86 mode, 01h enter native mode)
CX = length in bytes of Native Context Area ( >=1024 )
DX = segment of Native Context Area
Return: CF clear if successful
running in desired mode at instruction following INT D4 call
all segment registers converted to appropriate selectors/segments
CF set on error
AX = error code (see #0960 at INT 21/AH=59h)
Note: MS-DOS calls are available in protected mode
SeeAlso: AH=11h,AH=12h,AH=13h,INT 2F/AX=1687h,INT 67/AX=DE0Ch,INT 38
--------O-D411-------------------------------
INT D4 - PC-MOS/386 v3.0+ - ALLOCATE NATIVE MODE MEMORY BLOCK
AH = 11h
EBX = block length in bytes
Return: CF clear if successful
EBX = number of bytes actually allocated
ES = selector for allocated block
CF set on error
AX = error code (see #0960 at INT 21/AH=59h)
Program: PC-MOS/386 is a multitasking/multiuser MS-DOS-compatible operating
system by The Software Link, Inc.
Note: the memory must be released before the program terminates
SeeAlso: AH=10h,AH=12h,INT 38
--------O-D412-------------------------------
INT D4 - PC-MOS/386 v3.0+ - FREE NATIVE MODE MEMORY BLOCK
AH = 12h
ES = selector for block to free
Return: CF clear if successful
CF set on error
AX = error code (see #0960 at INT 21/AH=59h)
SeeAlso: AH=10h,AH=11h,AH=13h,INT 38
--------O-D413-------------------------------
INT D4 - PC-MOS/386 v5.01 - GET ALIAS FOR SELECTOR (NATIVE MODE ONLY)
AH = 13h
AL = type of alias selector (00h data, 01h stack, 02h code)
BX = selector
Return: CF clear if successful
AX = new selector or 0000h if BX selector not found
CF set on error
AX = error code (see #0960 at INT 21/AH=59h)
SeeAlso: AH=11h,AH=12h
--------O-D416-------------------------------
INT D4 - PC-MOS/386 v5.01 - SET/CLEAR IRQ RESERVATION
AH = 16h
AL = function (00h clear, 01h set reservation)
CX = IRQ number
Return: AX = status
(0000h successful, 0001h currently reserved by another task)
SeeAlso: AH=07h,INT 14/AH=11h"PC-MOS"
--------O-D419-------------------------------
INT D4 - PC-MOS/386 v5.01 - GET TASK ID
AH = 19h
Return: BX = caller's task ID
Program: PC-MOS/386 is a multitasking/multiuser MS-DOS-compatible operating
system by The Software Link, Inc.
SeeAlso: AH=1Dh,AH=1Eh
--------O-D41A-------------------------------
INT D4 - PC-MOS/386 v5.01 - GET/SET TASK PRIORITY
AH = 1Ah
AL = subfunction (00h read, 01h set, 02h get and set)
BX = task ID (FFFFh for current task)
CL = new priority value
Return: CF clear if successful
CL = current priority value
CF set on error
AX = error code (see #0960 at INT 21/AH=59h)
SeeAlso: AH=1Bh,AH=1Ch
--------O-D41B-------------------------------
INT D4 - PC-MOS/386 v5.01 - GET/SET TIME SLICE
AH = 1Bh
AL = subfunction (00h read, 01h set, 02h get and set)
BX = task ID (FFFFh for current task) (see AH=19h)
CL = new time slice value
Return: CF clear if successful
CL = current time slice value
CF set on error
AX = error code (see #0960 at INT 21/AH=59h)
SeeAlso: AH=1Ah,AH=1Ch
--------O-D41C-------------------------------
INT D4 - PC-MOS/386 v5.01 - GET/SET KEYBOARD MODE
AH = 1Ch
AL = subfunction (00h enable, 01h disable, 02h get mode)
BX = task ID (FFFFh for current task)
Return: CF clear if successful
CL = current keyboard state
CF set on error
AX = error code (INT 21/AH=59h)
Program: PC-MOS/386 is a multitasking/multiuser MS-DOS-compatible operating
system by The Software Link, Inc.
SeeAlso: AH=1Ah,AH=1Bh
--------O-D41D-------------------------------
INT D4 - PC-MOS/386 v5.01 - GET CURRENT PROGRAM NAME
AH = 1Dh
BX = task ID (FFFFh for current task) (see AH=19h)
ES:DI -> buffer for program name (see #3142)
Return: CF clear if successful
ES:DI buffer filled
CF set on error
AX = error code (see #0960 at INT 21/AH=59h)
SeeAlso: AH=19h,AH=1Eh

Format of PC-MOS/386 program name buffer:
Offset Size Description (Table 3142)
00h 8 BYTEs filename
08h 3 BYTEs extension
--------O-D41E-------------------------------
INT D4 - PC-MOS/386 v5.01 - GET CURRENT USERNAME AND SECURITY CLASS
AH = 1Eh
BX = task ID (FFFFh for current task)
ES:DI -> 4-byte buffer for username
Return: CF clear if successful
CL = security class
20h (' ') none
41h-5Ah ('A'-'Z') security level
ES:DI buffer filled
CF set on error
AX = error code (see #0960 at INT 21/AH=59h)
SeeAlso: AH=19h,AH=1Dh
--------O-D41F-------------------------------
INT D4 - PC-MOS/386 v5.01 - GET TASK PARTITION INFORMATION
AH = 1Fh
BX = task ID (FFFFh for current task) (see AH=19h)
Return: CF clear if successful
CX = start segment of task
DX = ending segment of task
CF set on error
AX = error code (see #0960 at INT 21/AH=59h)
Program: PC-MOS/386 is a multitasking/multiuser MS-DOS-compatible operating
system by The Software Link, Inc.
SeeAlso: AH=2Dh
--------O-D420-------------------------------
INT D4 - PC-MOS/386 v5.01 - GET PORT AND BAUDRATE INFORMATION
AH = 20h
BX = task ID (FFFFh for current task) (see AH=19h)
Return: CF clear if successful
CX = port number (0000h if none)
DI:SI = baudrate (if CX nonzero)
CF set on error
AX = error code (see #0960 at INT 21/AH=59h)
SeeAlso: INT 14/AH=0Ch"FOSSIL"
--------O-D421-------------------------------
INT D4 - PC-MOS/386 v5.01 - REMOVE A TASK
AH = 21h
BX = task ID (FFFFh for current task) (see AH=19h)
Return: CF clear if successful
AX = ASCII percentage of System Memory Pool used
(AH = tens digit, AL = ones digit)
DS,SI destroyed
CF set on error
AX = error code (see #0960 at INT 21/AH=59h)
Program: PC-MOS/386 is a multitasking/multiuser MS-DOS-compatible operating
system by The Software Link, Inc.
SeeAlso: AH=22h
--------O-D422-------------------------------
INT D4 - PC-MOS/386 v5.01 - ADD A TASK TO THE SYSTEM
AH = 22h
DS:SI -> addtask data structure (see #3144)
Return: CF clear if successful
ES = segment address of the new task's TCB data structure
CF set on error
AX = error code (see #3143)
SeeAlso: AH=21h

(Table 3143)
Values for PC-MOS/386 error code:
08h insufficient memory
0Bh invalid addtask structure format
12h insufficient available space in system memory pool
1Fh general failure
55h already allocated
57h if task already in use or invalid parameter

Format of PC-MOS/386 addtask data structure:

Offset Size Description (Table 3144)
00h WORD task size in KB (min 16KB)
02h WORD task ID (0000h for automatic selection)
04h BYTE task class (' ' or 'A'-'Z')
05h DWORD -> ASCIZ name of task startup batchfile
09h DWORD -> task's terminal driver (0000000h = background task)
0Dh WORD task port
0Fh DWORD task baud rate
13h DWORD (ret) total extended memory
17h DWORD (ret) number of 4K extended memory pages allocated
1Bh WORD (ret) paragraphs of system memory pool allocated
1Dh WORD (ret) system memory pool size in paragraphs
1Fh WORD (ret) ASCII task percentage of system memory pool
21h 3 BYTEs reserved
--------O-D423-------------------------------
INT D4 - PC-MOS/386 v5.01 - CHANGE TERMINAL DRIVER
AH = 23h
BX = task ID (FFFFh for current task)
DS:SI -> entry point of the new Device Driver Terminal
Return: CF clear if successful
CF set on error
AX = error code (see #0960 at INT 21/AH=59h)
--------O-D424-------------------------------
INT D4 U - PC-MOS/386 v5.01 - GET OPERATING SYSTEM SERIAL NUMBER
AH = 24h
Return: DS:DX -> '$'-terminated string containing the serial number
--------O-D425-------------------------------
INT D4 - PC-MOS/386 v5.01 - IDENTIFY LOAD ADDRESS OF DEVICE DRIVER LOCATION
AH = 25h
DX = driver's CS value
Return: AX = segment address of driver in system memory pool
(0000h if the driver is not within the system memory pool)
Program: PC-MOS/386 is a multitasking/multiuser MS-DOS-compatible operating
system by The Software Link, Inc.
--------O-D426-------------------------------
INT D4 - PC-MOS/386 v5.01 - GET SYSTEM CONTROL BLOCK SEGMENT/SELECTOR
AH = 26h
Return: DX = segment/selector of the System Control Block (see #3130)
Note: this function supersedes AH=02h
SeeAlso: AH=02h,AH=27h,AH=28h,AH=29h,AH=2Ah
--------O-D427-------------------------------
INT D4 - PC-MOS/386 v5.01 - GET TASK CONTROL BLOCK SEGMENT/SELECTOR
AH = 27h
BX = task ID (FFFFh if current task) (see AH=19h)
Return: CF clear if successful
DX = segment/selector for the Task Control Block (see #3132)
CF set on error
AX = error code (INT 21/AH=59h)
Note: this function supersedes AH=04h
SeeAlso: AH=26h,AH=28h,AH=29h,AH=2Ah
--------O-D428-------------------------------
INT D4 - PC-MOS/386 v5.01 - GET CONTROL BLOCK DATA FROM SCB OR TCB
AH = 28h
BX = offset into control block at which to start reading
CX = number of bytes to read
DX = segment/selector of control block obtained via AH=26h or AH=27h
ES:DI -> buffer for data
Return: CF clear if successful
CF set on error
AX = error code (see also INT 21/AH=59h)
05h access denied due to an invalid segment/selector
SeeAlso: AH=26h,AH=27h,AH=29h,AH=2Ah
--------O-D429-------------------------------
INT D4 - PC-MOS/386 v5.01 - WRITE CONTROL BLOCK DATA INTO SCB OR TCB
AH = 29h
BX = offset into control block at which to start writing
CX = number of bytes to write
DX = segment/selector of control block obtained via AH=26h or AH=27h
DS:SI -> buffer containing data to be written
Return: CF clear if successful
CF set on errro
AX = error code (see also INT 21/AH=59h)
05h access denied due to an invalid segment/selector
Note: this function performs no bounds checking
Program: PC-MOS/386 is a multitasking/multiuser MS-DOS-compatible operating
system by The Software Link, Inc.
SeeAlso: AH=26h,AH=27h,AH=28h,AH=2Ah
--------O-D42A-------------------------------
INT D4 - PC-MOS/386 v5.01 - SWAP CONTROL BLOCK DATA OF SCB OR TCB
AH = 2Ah
BX = offset into control block at which to start swap
CX = number of bytes to swap
DX = segment/selector of control block obtained via AH=26h or AH=27h
DS:SI -> buffer containing new data and to receive current data
Return: CF clear if successful
CF set on error
AX = error code (see also INT 21/AH=59h)
05h access denied due to an invalid segment/selector
Note: the interrupts are disabled during the swap to prevent corruption
SeeAlso: AH=26h,AH=27h,AH=28h,AH=29h
--------O-D42C-------------------------------
INT D4 - PC-MOS/386 v5.01 - GET/SET SPOOLER PARAMETERS
AH = 2Ch
AL = function
00h set spooler timeout
CX = timout value in seconds
01h get spooler timeout
Return: CX = current timeout in seconds
02h get spooler parameters
Return: CH = priority (00h-09h)
CL = disposition (d, h, i, n, s)
SI = class (a - z)
03h set spooler parameters
CH = priority (00h-09h)
CL = disposition (d, h, i, n, s)
SI = class (a - z)
BX = task ID (FFFFh for current task)
DX = LPT number
Return: CF clear if successful
CF set on error
AX = error code (see #0960 at INT 21/AH=59h)
SeeAlso: AH=00h,AH=02h,AH=03h
--------O-D42D-------------------------------
INT D4 - PC-MOS/386 v5.01 - GET MAXIMUM TASK SIZE
AH = 2Dh
Return: DX = maximum task size in paragraphs
BX = start address of task space
Program: PC-MOS/386 is a multitasking/multiuser MS-DOS-compatible operating
system by The Software Link, Inc.
SeeAlso: AH=1Fh,AH=22h
--------r-D5---------------------------------
INT D5 - IBM ROM BASIC - used while in interpreter
Notes: called by ROM BASIC, but pointed at IRET by BASIC.COM/BASICA.COM
BASIC.COM/BASICA.COM do not restore vector on termination
SeeAlso: INT 80"BASIC",INT D4"BASIC",INT D6"BASIC"
--------r-D5---------------------------------
INT D5 - STSC APL*PLUS/PC - MAY BE USED IN FUTURE RELEASES
--------r-D6---------------------------------
INT D6 - IBM ROM BASIC - used while in interpreter
Notes: called by ROM BASIC, but pointed at IRET by BASIC.COM/BASICA.COM
BASIC.COM/BASICA.COM do not restore vector on termination
SeeAlso: INT 80"BASIC",INT D5"BASIC",INT D7"BASIC"
--------r-D6---------------------------------
INT D6 - STSC APL*PLUS/PC - MAY BE USED IN FUTURE RELEASES
--------r-D7---------------------------------
INT D7 - IBM ROM BASIC - used while in interpreter
Notes: called by ROM BASIC, but pointed at IRET by BASIC.COM/BASICA.COM
BASIC.COM/BASICA.COM do not restore vector on termination
SeeAlso: INT 80"BASIC",INT D6"BASIC",INT D8"BASIC"

--------r-D7---------------------------------
INT D7 - STSC APL*PLUS/PC - MAY BE USED IN FUTURE RELEASES
--------r-D8---------------------------------
INT D8 - IBM ROM BASIC - used while in interpreter
Notes: called by ROM BASIC
BASIC.COM/BASICA.COM do not restore vector on termination
SeeAlso: INT 80"BASIC",INT D7"BASIC",INT D9"BASIC"
--------r-D8---------------------------------
INT D8 - STSC APL*PLUS/PC - MAY BE USED IN FUTURE RELEASES
--------H-D8---------------------------------
INT D8 - Screen Thief v1.00 - RELOCATED IRQ0
Range: INT 78h to INT E0h, selected by commandline switch
Note: Screen Thief relocates IRQs 0 through 7 to INT D8 to INT DF by default,
but may be directed via a commandline switch to use any range
starting at a multiple of 8 between 78h and E0h
SeeAlso: INT 08"IRQ0",INT 2D/AL=10h"Screen Thief",INT 50"DESQview"
SeeAlso: INT D9"Screen Thief"
--------r-D9---------------------------------
INT D9 - IBM ROM BASIC - used while in interpreter
Notes: called by ROM BASIC, but pointed at IRET by BASIC.COM/BASICA.COM
BASIC.COM/BASICA.COM do not restore vector on termination
SeeAlso: INT 80"BASIC",INT D8"BASIC",INT DA"BASIC"
--------r-D9---------------------------------
INT D9 - STSC APL*PLUS/PC - MAY BE USED IN FUTURE RELEASES
--------H-D9---------------------------------
INT D9 - Screen Thief v1.00 - RELOCATED IRQ1
Range: INT 79h to INT E1h, selected by commandline switch
Note: (see INT D8"Screen Thief")
SeeAlso: INT 09"IRQ1",INT D8"Screen Thief",INT DA"Screen Thief"
--------r-DA---------------------------------
INT DA - IBM ROM BASIC - used while in interpreter
Notes: called by ROM BASIC, but pointed at IRET by BASIC.COM/BASICA.COM
BASIC.COM/BASICA.COM do not restore vector on termination
SeeAlso: INT 80"BASIC",INT D9"BASIC",INT DB"BASIC"
--------r-DA---------------------------------
INT DA - STSC APL*PLUS/PC - MAY BE USED IN FUTURE RELEASES
--------H-DA---------------------------------
INT DA - Screen Thief v1.00 - RELOCATED IRQ2
Range: INT 7Ah to INT E2h, selected by commandline switch
Note: (see INT D8"Screen Thief")
SeeAlso: INT 0A"IRQ2",INT D9"Screen Thief",INT DB"Screen Thief"
--------r-DB---------------------------------
INT DB - IBM ROM BASIC - used while in interpreter
Notes: called by ROM BASIC
BASIC.COM/BASICA.COM do not restore vector on termination
SeeAlso: INT 80"BASIC",INT DA"BASIC",INT DC"BASIC"
--------r-DB---------------------------------
INT DB - STSC APL*PLUS/PC - MAY BE USED IN FUTURE RELEASES
--------H-DB---------------------------------
INT DB - Screen Thief v1.00 - RELOCATED IRQ3
Range: INT 7Bh to INT E3h, selected by commandline switch
Note: (see INT D8"Screen Thief")
SeeAlso: INT 0B"IRQ3",INT DA"Screen Thief",INT DC"Screen Thief"
--------u-DC---------------------------------
INT DC - PC/370 v4.1- - API
SeeAlso: INT 60"PC/370"
--------r-DC---------------------------------
INT DC - IBM ROM BASIC - used while in interpreter
Notes: called by ROM BASIC
BASIC.COM/BASICA.COM do not restore vector on termination
SeeAlso: INT 80"BASIC",INT DB"BASIC",INT DD"BASIC"
--------r-DC---------------------------------
INT DC - STSC APL*PLUS/PC - MAY BE USED IN FUTURE RELEASES
--------H-DC---------------------------------
INT DC - Screen Thief v1.00 - RELOCATED IRQ4
Range: INT 7Ch to INT E4h, selected by commandline switch
Note: (see INT D8"Screen Thief")
SeeAlso: INT 0C"IRQ4",INT DB"Screen Thief",INT DD"Screen Thief"
--------r-DD---------------------------------
INT DD - IBM ROM BASIC - used while in interpreter
Notes: called by ROM BASIC
BASIC.COM/BASICA.COM do not restore vector on termination
SeeAlso: INT 80"BASIC",INT DC"BASIC",INT DE"BASIC"
--------r-DD---------------------------------
INT DD - STSC APL*PLUS/PC v9.0 - PLACE KEYSTROKE EVENTS IN INPUT BUFFER
BX = where to place keystrokes
FFFFh insert before current buffer contents
0000h replace current contents
0001h insert after current contents
CX = number of keystroke events to insert
ES:SI -> data to be placed into buffer (list of WORD key codes)
4000h + N = normal ASCII keystroke N (N = 00h to FFh)
4100h + N = extended ASCII keystroke N (N = 03h to 84h)
SeeAlso: INT 16/AH=05h
--------H-DD---------------------------------
INT DD - Screen Thief v1.00 - RELOCATED IRQ5
Range: INT 7Dh to INT E5h, selected by commandline switch
Note: (see INT D8"Screen Thief")
SeeAlso: INT 0D"IRQ5",INT DC"Screen Thief",INT DE"Screen Thief"
--------r-DE---------------------------------
INT DE - IBM ROM BASIC - used while in interpreter
Notes: called by ROM BASIC
BASIC.COM/BASICA.COM do not restore vector on termination
SeeAlso: INT 80"BASIC",INT DD"BASIC",INT DF"BASIC"
--------r-DE---------------------------------
INT DE - APL*PLUS/PC - ???
Note: appears to be the same as INT 16
--------H-DE---------------------------------
INT DE - Screen Thief v1.00 - RELOCATED IRQ6
Range: INT 7Eh to INT E6h, selected by commandline switch
Note: (see INT D8"Screen Thief")
SeeAlso: INT 0E"IRQ6",INT DD"Screen Thief",INT DF"Screen Thief"
--------b-DF---------------------------------
INT DF - Victor 9000/Sirius 1 - SuperBIOS
--------r-DF---------------------------------
INT DF - IBM ROM BASIC - used while in interpreter
Notes: called by ROM BASIC
BASIC.COM/BASICA.COM do not restore vector on termination
SeeAlso: INT 80"BASIC",INT DE"BASIC",INT E0"BASIC"
--------r-DF---------------------------------
INT DF - APL*PLUS/PC - SAME AS INT 10
SeeAlso: INT 10
--------H-DF---------------------------------
INT DF - Screen Thief v1.00 - RELOCATED IRQ7
Range: INT 7Fh to INT E7h, selected by commandline switch
Note: (see INT D8"Screen Thief")
SeeAlso: INT 0F"IRQ7",INT DE"Screen Thief"
--------r-E0---------------------------------
INT E0 - IBM ROM BASIC - used while in interpreter
Notes: called by ROM BASIC
BASIC.COM/BASICA.COM do not restore vector on termination
SeeAlso: INT 80"BASIC",INT DF"BASIC",INT E1"BASIC"
--------r-E0---------------------------------
INT E0 - APL*PLUS/PC - RESTIME HIGH-RESOLUTION TIMER FOR QUAD MF FUNCTION
SeeAlso: INT CF"APL"
--------v-E0---------------------------------
INT E0 - VIRUS - "Micro-128" - ???
Note: Micro-128 also overwrites the upper half of the interrupt table
SeeAlso: INT 9E"VIRUS",INT F1"VIRUS"
----------E0---------------------------------
INT E0 - DeskMate (Tandy) - DESK EXECUTIVE API
AX = function code (numerous)
parameters passed in BX, DX, ES, DI, and/or BP
Return: AX = return from function
Program: DeskMate is a proprietary GUI from Tandy distributed with several
models of the Tandy 1000's, 2500's, 3000's, and laptops. Retail
and runtime versions also exist. Some Tandy's are designed to
boot directly into DeskMate.
SeeAlso: INT 15/AX=7002h,INT E1"DeskMate"
--------O-E0---------------------------------
INT E0 - CP/M-86, Concurrent CP/M, DR Multiuser DOS - FUNCTION CALLS
CL = function number (see #3145,#3146)
DS,DX = parameters
Return: as appropriate for function
CX is often the error code (see #3147)
Notes: several functions are covered in more detail in following entries
most of these calls are also supported by Digital Research's DOS Plus
v2.1; the unsupported functions are 26h,29h-2Bh,3Ah,3Dh-62h,71h-8Ch,
90h-92h,94h-97h,9Bh-ABh, and AEh-FFh
SeeAlso: INT 21/AX=4459h,INT 21/AH=E0h"DOS Plus"

(Table 3145)
Values for CP/M-86,DR Multiuser DOS function number:
00h terminate calling process (see also INT 21/AH=00h)
01h read a character
02h write character to default console (see also INT 21/AH=02h)
03h read character from default AUX (see also INT 21/AH=03h)
04h write character to default AUX (see also INT 21/AH=04h)
05h write character to default list device (see also INT 21/AH=05h)
06h perform raw I/O on default console (see also INT 21/AH=06h)
07h return default AUX input status
08h return default AUX output status
09h write string to default console (see also INT 21/AH=09h)
0Ah read string from default console (see also INT 21/AH=0Ah)
0Bh return default console input status (see also INT 21/AH=0Bh)
0Ch get BDOS release ID
0Dh reset all disk drives (see also INT 21/AH=0Dh)
0Eh set default drive (see also INT 21/AH=0Eh)
0Fh open file via FCB (see also INT 21/AH=0Fh,#0648)
10h close file via FCB (see also INT 21/AH=10h)
11h search for first matching file with FCB (see also INT 21/AH=11h)
12h search for next matching file with FCB (see also INT 21/AH=12h)
13h delete file via FCB (see also INT 21/AH=13h)
14h sequential read via FCB (see also INT 21/AH=14h)
15h sequential write via FCB (see also INT 21/AH=15h)
16h create file via FCB (see also INT 21/AH=16h)
17h rename file via FCB (see also INT 21/AH=17h)
18h get bit map of logged drives
19h get default drive (see also INT 21/AH=19h)
1Ah set DMA address offset
1Bh get default disk allocation vector (see also INT 21/AH=1Bh)
1Ch set default drive to read-only
1Dh get bit map of read-only drives
1Eh set file attributes via FCB (see also INT 21/AX=4301h)
1Fh get address of disk parameter block (see also INT 21/AH=1Fh)
20h get/set default user number
21h read random record via FCB (see also INT 21/AH=21h)
22h write random record via FCB (see also INT 21/AH=22h)
23h compute file size with FCB (see also INT 21/AH=23h)
24h get FCB random record number (see also INT 21/AH=24h)
25h reset specified drives
26h access specified drives (not in DR DOS Plus v2.1)
27h free specified drives
28h write random with FCB, zero fill (see also also INT 21/AH=28h)
2Ah lock records in FCB file (see also INT 21/AH=5Ch)
2Bh unlock records in FCB file (see also INT 21/AH=5Ch)
2Ch set BDOS multisector count
2Dh set BDOS error mode
2Eh get free space on disk
2Fh load, initialize, and jump to process (see also INT 21/AH=4Bh)
30h flush write-deferred buffers
31h get/set system variable (DOS Plus v2.1)
32h call BIOS (XIOS) character routine (see #3146)
33h set DMA address segment
34h get DMA buffer address
35h CP/M-86 allocate maximum memory
36h allocate maximum memory at specified segment
37h CP/M-86 allocate memory segment (see also INT 21/AH=48h)
38h allocate memory at specified segment
39h CP/M-86 free specified memory segment (see also INT 21/AH=49h)
3Ah CP/M-86 free all memory (not in DOS Plus v2.1)
3Bh load .CMD file into memory
3Ch (DOS Plus v2.1) call RSX program
40h (DR-NET) log on a server
41h (DR-NET) log off a server
42h (DR-NET) send a message
43h (DR-NET) receive a message
44h (DR-NET) get network status
45h (DR-NET) get requestor configuration table
46h (DR-NET) set compatibility attributes
47h (DR-NET) get server configuration table
48h (DR-NET) set network error mode
49h (DR-NET) attach network
4Ah (DR-NET) detach network
4Bh (DR-NET) set default password
4Ch (DR-NET) get-set long timeout
4Dh (DR-NET) get parameter table
50h (DR-NET) get network information
53h get current time (see also INT 21/AH=2Ch)
54h set current time (see also INT 21/AH=2Dh)
55h get binary system date (see also INT 21/AH=2Ah)
56h set system date (see also INT 21/AH=2Bh)
57h allocate system flag
58h deallocate system flag
59h reserve memory in global area
5Ah lock physical drive
5Bh unlock physical drive
5Ch search path for executable file
5Dh load and execute command (see also INT 21/AH=4Bh)
5Eh get/set process exit code
5Fh set country information
60h get country information
63h truncate FCB file (see also INT 21/AH=28h)
64h create/update directory label
65h get directory label
66h get FCB date stamp and password mode
67h write extended FCB
68h set system date and time
69h get system date and time in binary
6Ah establish password for file access
6Bh get OS serial number
6Ch (DOS Plus v2.1) get/set program return code
6Dh get/set console mode
6Eh get/set string delimiter
6Fh write block to default console
70h write block to default list device
71h execute DOS-compatible function
74h set FCB time and date stamps
80h allocate memory
82h deallocate memory
83h poll I/O device
84h wait on system flag
85h set system flag
86h create message queue
87h open message queue
88h delete message queue
89h read from message queue
8Ah conditionally read from message queue
8Bh write to message queue
8Ch conditionally write to message queue
8Dh delay calling process
8Eh call process dispatcher (yield CPU)
8Fh terminate calling process (same as function 00h)
90h create a process
91h set calling process' priority
92h attach to default console
93h detach from default console
95h assign default console to process
96h interpret and execute commandline
97h resident procedure library
98h parse ASCII string into FCB (see also INT 21/AH=29h)
99h return default console
9Ah get address of system data (SYSDAT)
9Bh get system time and date
9Ch return calling process' descriptor
9Dh terminate process by name or PD address
9Eh attach to default list device
9Fh detach from default list device
A0h select default list device
A1h conditionally attach to default list device
A2h conditionally attach to default console
A3h get OS version number
A4h get default list device
A5h attach to default AUX
A6h detach from default AUX
A7h conditionally attach to default AUX
A8h set default AUX
A9h return default AUX
ACh read block from default AUX
ADh (DOS Plus v2.1) write block to default AUX
B0h configure default AUX
B1h get/set device control parameters
B2h send Break through default AUX
B3h allocate physical memory
B4h free physical memory
B5h map physical memory
B6h nondestructive message queue read
B7h timed wait on system flag
B8h get/set I/O port mapping
B9h set list device timeout
BAh set AUX timeout value
BBh execute XIOS service
BDh (DR Multiuser DOS) delay
FFh return 80386 to native mode

(Table 3146)
Values for DOS Plus v2.1 XIOS functions:
00h terminate program
01h ???
02h check for console input status
03h read character from console
04h write character to console
05h write character to list device
06h write character to auxiliary device
07h read character from auxiliary device
0Fh get list device status
10h-14h reserved
15h device initialization
16h check console output status
17h-7Fh reserved
---BBC Acorn---
80h get XIOS version
81h get Tube semaphore
82h release Tube semaphore
83h select text/graphics
84h update B&W graphics rectangle
85h update color graphics rectangle
86h get/release/update mouse
87h get system error info
88h entry in CLOCK called by WatchDog RSP
89h BBC OSBYTE function
8Ah BBC OSWORD function

(Table 3147)
Values for DR Multiuser DOS Error Return Code:
00h no error
01h system call not implemented
02h illegal system call number
03h cannot find memory
04h illegal flag number
05h flag overrun
06h flag underrun
07h no unused Queue Descriptors
08h no free queue buffer
09h cannot find queue
0Ah queue in use
0Ch no free Process Descriptors
0Dh no queue access
0Eh empty queue
0Fh full queue
10h CLI queue missing
11h no 8087 in system
12h no unused Memory Descriptors
13h illegal console number
14h no Process Descriptor match
15h no console match
16h no CLI process
17h illegal disk number
18h illegal filename
19h illegal filetype
1Ah character not ready
1Bh illegal Memory Descriptor
1Ch bad return from BDOS load
1Dh bad return from BDOS read
1Eh bad return from BDOS open
1Fh null command
20h not owner of resource
21h no CSEG in load file
22h process Descriptor exists on Thread Root
23h could not terminate process
24h cannot attach to process
25h illegal list device number
26h illegal password
28h external termination occurred
29h fixup error upon load
2Ah flag set ignored
2Bh illegal auxilliary device number
--------O-E0----CL03-------------------------
INT E0 - DR Multiuser DOS - "A_READ" - READ CHARACTER FROM AUX DEVICE
CL = 03h
Return: AL = ASCII character
Notes: A_READ reads the next 8-bit character from the logical auxilliary
input device (AUXn:); control is not returned to the calling
process until a character has been read.
if another process owns AUX, this call blocks until the device becomes
available
SeeAlso: INT 21/AH=03h,INT E0/CL=04h,INT E0/CL=07h,INT E0/CL=A5h,INT E0/CL=ACh
--------O-E0----CL04-------------------------
INT E0 - DR Multiuser DOS - "A_WRITE" - WRITE CHARACTER TO AUX DEVICE
CL = 04h
DL = ASCII character
Return: nothing
Note: if another process owns AUX, this call blocks until the device becomes
available
SeeAlso: INT 21/AH=04h,INT E0/CL=03h,INT E0/CL=08h,INT E0/CL=A5h,INT E0/CL=ADh
--------O-E0----CL07-------------------------
INT E0 - DR Multiuser DOS - "A_STATIN" - GET INPUT STATUS OF AUX DEVICE
CL = 07h
Return: AL = status
00h not ready
FFh character available
Desc: determine whether the current AUX device has input available
SeeAlso: INT E0/CL=03h,INT E0/CL=08h
--------O-E0----CL08-------------------------
INT E0 - DR Multiuser DOS - "A_STATOUT" - GET OUTPUT STATUS OF AUX DEVICE
CL = 08h
Return: AL = status
00h not ready
FFh ready for output
Desc: determine whether the current AUX device is able to accept more output
SeeAlso: INT E0/CL=04h,INT E0/CL=07h
--------O-E0----CL59-------------------------
INT E0 - ConcCP/M,DR Multiuser DOS - "S_MEMORY" - RESERVE MEMORY IN GLOBAL AREA
CL = 59h
DX = size in bytes
Return: AX = status
FFFFh failed
other successful
ES:BX -> reserved memory
--------O-E0----CL86-------------------------
INT E0 - ConcCP/M,DR Multiuser DOS - "Q_MAKE" - CREATE MESSAGE QUEUE
CL = 86h
DS:DX -> queue descriptor (see #3148)
Return: AX = status (0000h success, FFFFh failure)
CX = error code (see #3147)
SeeAlso: INT E0/CL=87h

Format of DR Multiuser DOS queue descriptor:
Offset Size Description (Table 3148)
00h 2 WORDs internal use, initialize to zeros
04h WORD flags
06h 8 BYTEs queue name
0Eh WORD length of message
10h WORD number of messages
12h 4 WORDs internal use, initialize to zeros
1Ah WORD offset in system area of buffer for messages
--------O-E0----CL87-------------------------
INT E0 - ConcCP/M,DR Multiuser DOS - "Q_OPEN" - OPEN MESSAGE QUEUE
CL = 87h
DS:DX -> queue parameter block (see #3149)
Return: AX = status (0000h success, FFFFh failure)
CX = error code (see #3147)
SeeAlso: INT E0/CL=86h,INT E0/CL=89h

Format of DR Multiuser DOS queue parameter block:
Offset Size Description (Table 3149)
00h WORD internal use, initialize to zero
02h WORD queue ID (set by INT E0/CL=87h)
04h WORD internal use, initialize to zero
06h WORD offset of queue message buffer
08h 8 BYTEs queue name
--------O-E0----CL89-------------------------
INT E0 - ConcCP/M,DR Multiuser DOS - "Q_READ" - READ MESSAGE QUEUE
CL = 89h
DS:DX -> queue parameter block (see #3149)
Return: AX = status (0000h success, FFFFh failure)
CX = error code (see #3147)
SeeAlso: INT E0/CL=87h,INT E0/CL=8Ah,INT E0/CL=8Bh
--------O-E0----CL8A-------------------------
INT E0 - ConcCP/M,DR Multiuser DOS - "Q_CREAD" - CONDITIONALLY READ MSG QUEUE
CL = 8Ah
DS:DX -> queue parameter block (see #3149)
Return: AX = status (0000h success, FFFFh failure)
CX = error code (see #3147)
SeeAlso: INT E0/CL=87h,INT E0/CL=89h,INT E0/CL=8Ch
--------O-E0----CL8B-------------------------
INT E0 - ConcCP/M,DR Multiuser DOS - "Q_WRITE" - WRITE MESSAGE QUEUE
CL = 8Bh
DS:DX -> queue parameter block (see #3149)
Return: AX = status (0000h success, FFFFh failure)
CX = error code (see #3147)
SeeAlso: INT E0/CL=89h,INT E0/CL=8Ch
--------O-E0----CL8C-------------------------
INT E0 - ConcCP/M,DR Multiuser DOS - "Q_CWRITE" - CONDITIONALLY WRITE MSG QUEUE
CL = 8Ch
DS:DX -> queue parameter block (see #3149)
Return: AX = status (0000h success, FFFFh failure)
CX = error code (see #3147)
SeeAlso: INT E0/CL=8Ah,INT E0/CL=8Bh
--------O-E0----CL8E-------------------------
INT E0 - ConcCP/M,DR Multiuser DOS - "P_DISPATCH" - CALL DISPATCHER
CL = 8Eh
DX = FFFFh (optional) to force dispatch
Return: nothing
Desc: allow other processes of the same or higher priority to run if they
are ready
Note: if DX=FFFFh, a dispatch is forced even if no other process is ready
SeeAlso: INT E0/CL=91h
--------O-E0----CL91-------------------------
INT E0 - ConcCP/M,DR Multiuser DOS - "P_PRIORITY" - SET PROCESS PRIORITY
CL = 91h
DL = new priority (00h highest to FFh lowest)
Note: sets priority of calling process; transient processes are initialized
to priority C8h
SeeAlso: INT E0/CL=8Eh
--------O-E0----CL93-------------------------
INT E0 - ConcCP/M,DR Multiuser DOS - "C_DETACH" - DETACH FROM DEFAULT CONSOLE
CL = 93h
Return: AX = status
0000h successfully detached
FFFFh detach failed
SeeAlso: INT E0/CL=A6h
--------O-E0----CLA5-------------------------
INT E0 - DR Multiuser DOS - "A_ATTACH" - ATTACH AUX DEVICE
CL = A5h
Return: nothing
Desc: attaches the default auxiliary device to the calling process unless
it is already attached to another process, in which case the call
blocks until the device becomes available
Note: this call should be used before attempting to read or write from
the AUX device; however, the I/O calls internally call this function
to ensure device ownership
SeeAlso: INT E0/CL=03h,INT E0/CL=04h,INT E0/CL=A6h,INT E0/CL=A7h,INT E0/CL=A8h
SeeAlso: INT E0/CL=ACh,INT E0/CL=ADh,INT E0/CL=B0h
--------O-E0----CLA6-------------------------
INT E0 - DR Multiuser DOS - "A_DETACH" - DETACH FROM AUX DEVICE
CL = A6h
Return: AX = status
0000h successfully detached
FFFFh detach failed
CX = error code
SeeAlso: INT E0/CL=93h,INT E0/CL=A5h,INT E0/CL=A7h
--------O-E0----CLA7-------------------------
INT E0 - DR Multiuser DOS - "A_CATTACH" - CONDITIONALLY ATTACH TO AUX DEVICE
CL = A7h
Return: AX = status
0000h attached
FFFFh unable to attach
Desc: attaches the default auxiliary device to the calling process if it is
available
Note: does not block if the device is already in use
SeeAlso: INT E0/CL=A5h,INT E0/CL=A6h,INT E0/CL=A8h,INT E0/CL=B0h
--------O-E0----CLA8-------------------------
INT E0 - DR Multiuser DOS - "A_SET" - SET DEFAULT AUX DEVICE NUMBER
CL = A8h
DL = auxiliary device number
Return: AX = status
0000h successful
FFFFh failed
CX = error code
Desc: specify which physical device will become AUX
SeeAlso: INT E0/CL=A5h,INT E0/CL=A9h
--------O-E0----CLA9-------------------------
INT E0 - DR Multiuser DOS - "A_GET" - GET DEFAULT AUX DEVICE NUMBER
CL = A9h
Return: AL = current default auxiliary device number
Desc: determine which physical device is currently AUX
SeeAlso: INT E0/CL=A8h
--------O-E0----CLAC-------------------------
INT E0 - DR Multiuser DOS - "A_READBLK" - READ STRING FROM AUX DEVICE
CL = ACh
DS:DX -> character control block (CHCB) (see #3150)
Return: AX = number of characters read
Desc: read characters from the default auxiliary (AUXn:) device into a buffer
until the buffer is full or the device is no longer ready
Notes: if the device is initially not ready, blocks until at least one
character has been read
if another process owns AUX, this call blocks until the device becomes
available
SeeAlso: INT E0/CL=03h,INT E0/CL=A5h,INT E0/CL=ADh

Format of DR Multiuser DOS character control block (CHCB):
Offset Size Description (Table 3150)
00h DWORD pointer to character buffer
04h WORD length of character buffer
--------O-E0----CLAD-------------------------
INT E0 - DR Multiuser DOS - "A_WRITEBLK" - WRITE STRING TO AUX DEVICE
CL = ADh
DS:DX -> character control block (see #3150)
Return: AX = number of characters written
Note: does not return until at least one character has been written
SeeAlso: INT E0/CL=04h,INT E0/CL=A5h,INT E0/CL=ACh
--------O-E0----CLB0-------------------------
INT E0 - DR Multiuser DOS - "A_CONFIG" - GET/SET AUX DEVICE PARAMETERS
CL = B0h
DX:DX -> AUX device parameter block (see #3151)
Return: AX = status
0000h successful
parameter block updated
FFFFh failed
CX = error code
SeeAlso: INT E0/CL=A5h,INT E0/CL=B1h

Format of DR Multiuser DOS AUX device parameter block:
Offset Size Description (Table 3151)
00h BYTE function (00h get, 01h set)
01h BYTE baud rate (see #3153) FFh = don't change/unknown
02h BYTE parity (see #3152)
03h BYTE stop bits (00h one, 01h 1.5, 02h two, FFh unknown/don't change)
04h BYTE data bits (05h-08h or FFh unknown/don't change)
05h BYTE handshake (00h none, 01h DTS/DSR, 02h RTS/CTS, 04h XON/XOFF,
FFh unknown/don't change)
06h BYTE XON character, FFh unknown/don't change
07h BYTE XOFF character, FFh unknown/don't change

(Table 3152)
Values for DR Multiuser DOS AUX parity:
00h none
01h odd
02h none
03h even
04h stick parity bit
FFh don't change/unknown

(Table 3153)
Values for DR Multiuser DOS AUX baud rate:
00h 50 baud
01h 62.5 baud
02h 75 baud
03h 110 baud
04h 134.5 baud
05h 150 baud
06h 200 baud
07h 300 baud
08h 600 baud
09h 1200 baud
0Ah 1800 baud
0Bh 2000 baud
0Ch 2400 baud
0Dh 3600 baud
0Eh 4800 baud
0Fh 7200 baud
10h 9600 baud
11h 19200 baud
12h 38400 baud
13h 56000 baud
14h 76800 baud
15h 115200 baud
--------O-E0----CLB1-------------------------
INT E0 - DR Multiuser DOS - "A_CONTROL" - GET/SET AUX CONTROL PARAMETERS
CL = B1h
DS:DX -> AUX device control block (see #3154)
Return: AX = status
0000h successful
control block updated
FFFFh failed
CX = error code
SeeAlso: INT E0/CL=B0h,INT E0/CL=B2h

Format of DR Multiuser DOS AUX device control block:
Offset Size Description (Table 3154)
00h BYTE function (00h get, 01h set)
01h BYTE DTR state (00h low, 01h high, FFh unknown/don't change)
02h BYTE RTS state (00h low, 01h high, FFh unknown/don't change)
03h BYTE DSR state (00h low, 01h high, FFh unknown/don't change)
04h BYTE CTS state (00h low, 01h high, FFh unknown/don't change)
05h BYTE DCD state (00h low, 01h high, FFh unknown/don't change)
06h BYTE RI state (00h inactive, 01h active, FFh unknown/don't change)
--------O-E0----CLB2-------------------------
INT E0 - DR Multiuser DOS - "A_BREAK" - SEND BREAK TO AUX DEVICE
CL = B2h
DX = duration of break in system ticks (0001h-FFFFh)
Return: AX = status
0000h successful
break signal completed
FFFFh failed
CX = error code
Note: if the AUX device is currently owned by another process, this call will
block until the device becomes available
SeeAlso: INT E0/CL=A5h,INT E0/CL=B1h
--------O-E0----CLBD-------------------------
INT E0 - DR Multiuser DOS - "P_DELAY" - DELAY EXECUTION
CL = BDh
DX = delay in system ticks
Return: after the delay elapses
Notes: the length of a system tick is installation-dependent (typically
1/50 or 1/60 second); the length may be determined by reading the
TICKSPERSEC value from the system data segment
the actual delay before the process is rescheduled to run may be up to
one tick longer than requested; the delay between rescheduling and
actual execution cannot be predicted if higher-priority processes
are awaiting a turn at the CPU
SeeAlso: INT 15/AH=86h,INT 1A/AX=FF01h,INT 2F/AX=1224h,INT 62/AX=0096h
--------g-E00000-----------------------------
INT E0 - PCROBOTS v1.41 - "SWAPTASK" - END CURRENT ROBOT'S TURN
AX = 0000h
Return: nothing
Program: PCROBOTS is P.D. Smith's adaptation of Tom Poindexter's CROBOTS, in
which specially-written .COM or .EXE programs form robots battling
each other in a user-defined arena
--------g-E00001-----------------------------
INT E0 - PCROBOTS v1.41 - "MOVEMENT" - START MOVING
AX = 0001h
BX = speed (0-maximum for robot)
CX = direction (0-359 degrees)
Return: nothing
Notes: the speed will change to the specified value at the maximum
acceleration the robot is capable of; if the robot is already moving
faster than its maximum maneuverability speed, it will not be able
to change direction
this call also terminates the current robot's turn
SeeAlso: AX=0000h,AX=0002h,AX=0003h
--------g-E00002-----------------------------
INT E0 - PCROBOTS v1.41 - "SCAN" - SCAN FOR OTHER ROBOTS IN THE GIVEN DIRECTION
AX = 0002h
BX = direction (0-359 degrees)
CX = resolution (0-45 degrees)
Return: AX = status
FFFFh if nothing detected
else robot ID (0-19)
BX = range to detected robot
Notes: the scan searches within CX degrees to either side of the specified
direction
the scanner will see right through walls, but shells will not pass
through walls
this call also terminates the current robot's turn
SeeAlso: AX=0000h,AX=0001h,AX=0003h
--------g-E00003-----------------------------
INT E0 - PCROBOTS v1.41 - "SHOOT" - FIRE A SHELL AT ANOTHER ROBOT
AX = 0003h
BX = direction (0-359 degrees)
CX = range (0-700)
Return: AX = status (0000h not fired, else ID of shell fired)
Notes: up to seven shells may be in flight for a robot at one time; the cannon
takes 50 ticks to reload
this call also terminates the current robot's turn
SeeAlso: AX=0000h,AX=0001h,AX=0002h,AX=002Ch
--------g-E00010-----------------------------
INT E0 - PCROBOTS v1.41 - "GETXY" - GET ROBOT'S CURRENT POSITION
AX = 0010h
Return: BX = current X coordinate (0-999)
CX = current Y coordinate (0-999)
--------g-E00011-----------------------------
INT E0 - PCROBOTS v1.41 - "TRANSMIT" - SEND DATA TO ANOTHER ROBOT
AX = 0011h
BX = target robot ID
CX = data to be sent
Return: AX = status (0000h data could not be sent, 0001h data sent)
Note: this call costs one unit of battery power
--------g-E00012-----------------------------
INT E0 - PCROBOTS v1.41 - "RECEIVE" - GET DATA FROM OTHER ROBOTS
AX = 0012h
Return: AX = status
0000h no data available
0001h data retrieved
BX = sender's ID
CX = data
Note: each robot has a 20-word receive FIFO; if the FIFO is full, other
robots will be unable to send more data until some is read
--------g-E00013-----------------------------
INT E0 - PCROBOTS v1.41 - "DAMAGE" - DETERMINE HOW MUCH DAMAGE SUSTAINED
AX = 0013h
Return: BX = damage status
Note: the initial value depends on configuration, but is typically 100; as
the robot is damaged, it decreases
--------g-E00014-----------------------------
INT E0 - PCROBOTS v1.41 - "SPEED" - DETERMINE HOW FAST ROBOT IS MOVING
AX = 0014h
Return: BX = current speed
--------g-E00015-----------------------------
INT E0 - PCROBOTS v1.41 - "BATTERY" - DETERMINE HOW MUCH BATTERY POWER LEFT
AX = 0015h
Return: BX = current battery charge
Note: the battery starts off with 1000 units of charge, and is constantly
being charged by solar panels and constantly discharged by motion;
the battery is charged at 4 units per turn and discharged at
0.1*speed units per turn.
--------g-E00016-----------------------------
INT E0 - PCROBOTS v1.41 - "TICKS" - DETERMINE HOW LONG SINCE GAME STARTED
AX = 0016h
Return: BX:CX = number of game ticks elapsed (not related to real time)
--------g-E00017-----------------------------
INT E0 - PCROBOTS v1.41 - "L_SIN" - GET SCALED SINE OF AN ANGLE
AX = 0017h
BX = angle (0-359 degrees)
Return: BX:CX = 100000*sine of angle
SeeAlso: AX=0018h,AX=0019h,AX=001Ah,AX=001Bh
--------g-E00018-----------------------------
INT E0 - PCROBOTS v1.41 - "L_COS" - GET SCALED COSINE OF AN ANGLE
AX = 0018h
BX = angle (0-359 degrees)
Return: BX:CX = 100000*cosine of angle
SeeAlso: AX=0017h,AX=0019h,AX=001Ah
--------g-E00019-----------------------------
INT E0 - PCROBOTS v1.41 - "L_TAN" - GET SCALED TANGENT OF AN ANGLE
AX = 0019h
BX = angle (0-359 degrees)
Return: BX:CX = 100000*tangent of angle
SeeAlso: AX=0017h,AX=0018h,AX=001Ah
--------g-E0001A-----------------------------
INT E0 - PCROBOTS v1.41 - "L_ATAN" - GET ANGLE GIVEN SCALED TANGENT
AX = 001Ah
BX:CX = 100000*tangent of an angle
Return: AX = angle (-90 to +90 degrees)
SeeAlso: AX=0017h,AX=0018h,AX=0019h
--------g-E0001B-----------------------------
INT E0 - PCROBOTS v1.41 - "SQRT" - DETERMINE SQUARE ROOT OF A NUMBER
AX = 001Bh
BX:CX = value
Return: BX:CX = square root
SeeAlso: AX=0017h
--------g-E0001C-----------------------------
INT E0 - PCROBOTS v1.41 - "SET_PATTERN" - SPECIFY ROBOT'S DISPLAY IMAGE
AX = 001Ch
BX:CX -> pattern array
Return: nothing
Note: the pattern array consists of five bytes, the low five bits of each
specifying the bit pattern for one line of the robot's screen display
--------g-E0001D-----------------------------
INT E0 - PCROBOTS v1.41 - "DEBUG_FLAG" - SET/CLEAR MARKERS NEXT TO ROBOT'S NAME
AX = 001Dh
BX = flag number (0 or 1)
CX = new value (0 reset, 1 set)
Return: nothing
Program: PCROBOTS is P.D. Smith's adaptation of Tom Poindexter's CROBOTS, in
which specially-written .COM or .EXE programs form robots battling
each other in a user-defined arena
Note: the two flag markers may be used for any purpose, typically for
debugging to provide a visual display of progress
--------g-E0001E-----------------------------
INT E0 - PCROBOTS v1.41 - "BUY_ARMOUR" - BUY OR SELL ARMOR FOR ROBOT
AX = 001Eh
BX = number of armor units to buy (negative to sell)
Return: nothing
Note: each armor unit is worth 50 battery units; the robot's armor rating
will not go above its initial rating, so attempts to purchase more
will waste battery units
SeeAlso: AX=001Fh
--------g-E0001F-----------------------------
INT E0 - PCROBOTS v1.41 - "BUY_SHELLS" - BUY ADDITIONAL CANNON SHELLS
AX = 001Fh
BX = number of shells to buy
Return: nothing
Note: each shell costs ten battery units
SeeAlso: AX=001Eh,AX=0020h
--------g-E00020-----------------------------
INT E0 - PCROBOTS v1.41 - "SHELLS LEFT" - DETERMINE HOW MANY SHELLS ROBOT HAS
AX = 0020h
Return: BX = number of shells remaining
SeeAlso: AX=001Fh
--------g-E00021-----------------------------
INT E0 - PCROBOTS v1.41 - "GET LOCAL MAP"
AX = 0021h
BX:CX -> 81-byte buffer for map (see #3155)
Return: buffer filled with 9x9 area of map centered on robot's position

(Table 3155)
Values for PCROBOTS map squares:
2Eh '.' empty square
44h 'D' damaging trap
52h 'R' refueling point
58h 'X' wall
--------g-E00022-----------------------------
INT E0 - PCROBOTS v1.41 - "INVISIBILITY" - CONTROL ROBOT'S INVISIBILITY DEVICE
AX = 0022h
BX = new state (0000h become visible, 0001h become invisible)
Return: nothing
Notes: this function has no effect if the robot is not capable of invisibility
the robot can only stay invisible for 100 turns, after which it will
automatically become visible; it must also be remain visible for
as many turns as it was invisible before it can turn invisible
again
SeeAlso: AX=0024h,AX=0080h
--------g-E00023-----------------------------
INT E0 - PCROBOTS v1.41 - "GET_SHELL_STATUS" - FIND OUT WHAT HAPPENED TO SHELL
AX = 0023h
Return: BX = status of last shell to land
0000h missed completely
0001h hit a wall
0002h hit a robot within 50-square radius
0003h hit a robot within 25-square radius
0004h hit a robot within 5-square radius
--------g-E00024-----------------------------
INT E0 - PCROBOTS v1.41 - "IS_INVISIBLE" - DETERMINE WHETHER ROBOT IS INVISIBLE
AX = 0024h
Return: BX = visibility (0000h visible, 0001h invisible)
SeeAlso: AX=0022h,AX=0080h
--------g-E00025-----------------------------
INT E0 - PCROBOTS v1.41 - "L_ATAN2" - GET ARCTANGENT
AX = 0025h
BX = Y
CX = X
Return: AX = angle (arctangent of Y/X)
--------g-E00026-----------------------------
INT E0 - PCROBOTS v1.41 - "GET_ROBOT_ID" - DETERMINE CURRENT ROBOT'S IDENTIFIER
AX = 0026h
Return: AX = robot ID
--------g-E00027-----------------------------
INT E0 - PCROBOTS v1.41 - "REGISTER_IFF" - REGISTER FRIEND/FOE IDENT STRING
AX = 0027h
BX:CX = ASCIZ IFF string
Return: nothing
Note: the IFF string may only be set once
SeeAlso: AX=0028h,AX=0029h
--------g-E00028-----------------------------
INT E0 - PCROBOTS v1.41 - "CHECK_IFF" - QUERY FRIEND/FOE IDENTIFICATION STRING
AX = 0028h
BX = robot ID to test
Return: AX = status
0000h IFF strings match
0001h IFF strings differ or invalid robot ID
SeeAlso: AX=0027h
--------g-E00029-----------------------------
INT E0 - PCROBOTS v1.41 - "REGISTER_NAME" - SPECIFY ROBOT'S NAME
AX = 0029h
BX:CX -> ASCIZ name string
Return: nothing
Note: the name may only be set once
SeeAlso: AX=0027h,AX=002Ah
--------g-E0002A-----------------------------
INT E0 - PCROBOTS v1.41 - "FIND_NAME" - SEARCH FOR ROBOT WITH GIVEN NAME
AX = 002Ah
BX:CX -> ASCIZ name string
DX = first ID to check
Return: AX = robot ID or FFFFh if no robot with specified name
SeeAlso: AX=0028h,AX=0029h,AX=002Bh
--------g-E0002B-----------------------------
INT E0 - PCROBOTS v1.41 - "GET_TEAM_ID" - DETERMINE TEAM MEMBERSHIP OF ROBOT
AX = 002Bh
Return: AX = team ID (0-2) or FFFFh if 'loner'
SeeAlso: AX=0029h
--------g-E0002C-----------------------------
INT E0 - PCROBOTS v1.41 - "GET_ASHELL_STATUS" - FIND OUT WHAT HAPPENED TO SHELL
AX = 002Ch
BX = shell ID
Return: AX = status
0000h missed completely
0001h hit a wall
0002h hit a robot within a 50-square radius
0003h hit a robot within a 25-square radius
0004h hit a robot within a 5-square radius
0005h shell not known (too old or not yet fired)
0006h shell still in flight
SeeAlso: AX=0003h
--------g-E0002D-----------------------------
INT E0 - PCROBOTS v1.41 - "REGISTER_X" - SELECT AUTOMATIC X POSITION UPDATES
AX = 002Dh
BX:CX -> X word variable
Return: AX = status (0001h OK, 0000h problem with address)
Note: after this call, PCROBOTS will automatically update the specified
word whenever the robot moves
SeeAlso: AX=002Eh
--------g-E0002E-----------------------------
INT E0 - PCROBOTS v1.41 - "REGISTER_Y" - SELECT AUTOMATIC Y POSITION UPDATES
AX = 002Eh
BX:CX -> Y word variable
Return: AX = status (0001h OK, 0000h problem with address)
Note: after this call, PCROBOTS will automatically update the specified
word whenever the robot moves
SeeAlso: AX=002Dh
--------g-E00080-----------------------------
INT E0 - PCROBOTS v1.41 - "CONFIGURE" - CUSTOMIZE ROBOT
AX = 0080h
BX = basic configuration (see #3156)
CX = advanced configuration (see #3157)
Return: AX = status (0001h OK, 0000h not first call in program)
Program: PCROBOTS is P.D. Smith's adaptation of Tom Poindexter's CROBOTS, in
which specially-written .COM or .EXE programs form robots battling
each other in a user-defined arena
Notes: a maximum of ten points may be allocated to the robot; if you attempt
to allocate more, some items will be given a value of zero. If this
function is not called, each attribute is set to the default value
of 2.
if the invisibility option is chosen, the robot will start with only
900 cannon shells instead of the default 1000

Bitfields for PCROBOTS basic configuration:
Bit(s) Description (Table 3156)
0-3 maximum speed (0-4 = 50,75,100,150,200)
4-7 maneuverability (0-4 = 20%,35%,50%,75%,100%)
8-11 cannon range (0-4 = 300,500,700,1000,1500)
12-15 robot armor (0-4 = 50,75,100,150,200)

Bitfields for PCROBOTS advanced configuration:
Bit(s) Description (Table 3157)
0-2 robot acceleration (0-4 = 5,7,10,15,20)
3 capable of invisibility
--------r-E1---------------------------------
INT E1 - IBM ROM BASIC - used while in interpreter
Notes: called by ROM BASIC
BASIC.COM/BASICA.COM do not restore vector on termination
--------N-E1---------------------------------
INT E1 - PC Cluster Disk Server Information (NOT A VECTOR!)
Desc: points at a data table
SeeAlso: INT E2
--------O-E1---------------------------------
INT E1 - MP/M-86, - ALTERNATE CP/M-86 FUNCTION CALLS
CL = function number (see #3145,#3146 at INT E0"CP/M")
DS,DX = parameters
Return: as appropriate for function
CX is often the error code (see #3147 at INT E0"CP/M")
Desc: used by some applications which alter CP/M functions while running a
child program, to store the original INT E0 vector before
intercepting INT E0
SeeAlso: INT E0"CP/M"
----------E1---------------------------------
INT E1 - DeskMate (Tandy) - TASK DATA SEGMENTS (NOT A VECTOR!)
Desc: used to store data; the low word of the vector is the data segment for
the first task; the high word is the data segment of the second task
(DeskMate supports 2-way task switching between small- or
medium-model applications)
Program: DeskMate is a proprietary GUI from Tandy distributed with several
models of the Tandy 1000's, 2500's, 3000's, and laptops. Retail
and runtime versions also exist. Some Tandy's are designed to
boot directly into DeskMate.
SeeAlso: INT E0"DeskMate"
--------r-E2---------------------------------
INT E2 - IBM ROM BASIC - used while in interpreter
Notes: called by ROM BASIC
BASIC.COM/BASICA.COM do not restore vector on termination
--------N-E2---------------------------------
INT E2 - PC Cluster Program - RELOCATED INT 1C
SeeAlso: INT 1C
--------r-E3---------------------------------
INT E3 - IBM ROM BASIC - used while in interpreter
Notes: called by ROM BASIC
BASIC.COM/BASICA.COM do not restore vector on termination
--------r-E40005-----------------------------
INT E4 - Logitech Modula v2.0 - MonitorEntry
AX = 0005h
BX = priority
Return: nothing
SeeAlso: AX=0006h
--------r-E40006-----------------------------
INT E4 - Logitech Modula v2.0 - MonitorExit
AX = 0006h
Return: nothing
SeeAlso: AX=0005h
--------r-E4---------------------------------
INT E4 - IBM ROM BASIC - used while in interpreter
Notes: called by ROM BASIC
BASIC.COM/BASICA.COM do not restore vector on termination
--------r-E5---------------------------------
INT E5 - IBM ROM BASIC - used while in interpreter
Notes: called by ROM BASIC, but pointed at IRET by BASIC.COM/BASICA.COM
BASIC.COM/BASICA.COM do not restore vector on termination
--------r-E6---------------------------------
INT E6 - IBM ROM BASIC - used while in interpreter
Notes: called by ROM BASIC
BASIC.COM/BASICA.COM do not restore vector on termination
--------O-E600-------------------------------
INT E6 - Linux DOSEMU - INSTALLATION CHECK
AH = 00h
Return: AX = AA55h if installed
BX = DOSEMU version number * 100 (decimal)
CX = patchlevel
SeeAlso: AH=FFh
--------O-E601-------------------------------
INT E6 - Linux DOSEMU - REGISTER DUMP
AH = 01h
SeeAlso: AH=00h
--------O-E602-------------------------------
INT E6 - Linux DOSEMU - SET I/O PORT PERMISSIONS
AH = 02h
BX = base I/O port address
CX = number of consecutive I/O ports
CF set to allow DOS to use ports
CF clear if DOS should not be allowed to use ports
SeeAlso: AH=00h
--------O-E605-------------------------------
INT E6 - Linux DOSEMU - STARTUP BANNER
AH = 05h
Return: nothing
SeeAlso: AH=00h
--------O-E612-------------------------------
INT E6 - Linux DOSEMU - SET "HOGTHRESHOLD"
AH = 12h
BX = new "hogthreshold" (00h-99h)
Return: nothing
Desc: specify how much CPU time DOSEMU may use
SeeAlso: AH=00h
--------O-E622-------------------------------
INT E6 - Linux DOSEMU - GET EMS STATUS
AH = 22h
Return: ???
SeeAlso: AH=00h
--------O-E630-------------------------------
INT E6 - Linux DOSEMU - SET BOOTDISK FLAG
AH = 30h
BX = new flag state (0 = false, 1 = true)
Return: nothing
SeeAlso: AH=00h
--------O-E650-------------------------------
INT E6 - Linux DOSEMU - EXECUTE UNIX COMMAND
AH = 50h
ES:DX -> ASCIZ Unix command
SeeAlso: AH=00h,AH=51h
--------O-E651-------------------------------
INT E6 - Linux DOSEMU - EXECUTE DOS COMMAND FROM UNIX
AH = 51h
ES:DX -> ASCIZ DOS command
SeeAlso: AH=00h,AH=50h
--------O-E680-------------------------------
INT E6 - Linux DOSEMU - GET CURRENT UNIX DIRECTORY
AH = 80h
Return: ES:DX -> current Unix directory
AX = length of current directory name
SeeAlso: AH=00h,AH=81h
--------O-E681-------------------------------
INT E6 - Linux DOSEMU - CHANGE CURRENT UNIX DIRECTORY
AH = 81h
ES:DX -> ASCIZ directory name
SeeAlso: AH=00h,AH=80h
--------O-E6FF-------------------------------
INT E6 - Linux DOSEMU - TERMINATE
AH = FFh
SeeAlso: AH=00h
--------r-E7---------------------------------
INT E7 - IBM ROM BASIC - used while in interpreter
Notes: called by ROM BASIC
BASIC.COM/BASICA.COM do not restore vector on termination
--------r-E8---------------------------------
INT E8 - IBM ROM BASIC - used while in interpreter
Notes: called by ROM BASIC, but pointed at IRET by BASIC.COM/BASICA.COM
BASIC.COM/BASICA.COM do not restore vector on termination
--------r-E9---------------------------------
INT E9 - IBM ROM BASIC - used while in interpreter
Notes: called by ROM BASIC
BASIC.COM/BASICA.COM do not restore vector on termination
--------r-EA---------------------------------
INT EA - IBM ROM BASIC - used while in interpreter
Notes: called by ROM BASIC
BASIC.COM/BASICA.COM do not restore vector on termination
--------r-EB---------------------------------
INT EB - IBM ROM BASIC - used while in interpreter
Notes: called by ROM BASIC
BASIC.COM/BASICA.COM do not restore vector on termination
--------r-EC---------------------------------
INT EC - IBM ROM BASIC - used while in interpreter
Notes: called by ROM BASIC
BASIC.COM/BASICA.COM do not restore vector on termination
--------N-EC---------------------------------
INT EC - used by Alloy NTNX
--------r-EC---------------------------------
INT EC - Exact - RUNTIME INTERFACE MULTIPLEXOR
AX = function number (0000h to 0140h)
STACK: DWORD address to return to
any arguments required by function
Return: STACK: return address popped, but otherwise unchanged
Desc: this is the interface from applications to the runtime system by Exact
Automatisering B.V. of the Netherlands. By using this interrupt,
it can provide DLL-style capabilities under MS-DOS.
Note: the interrupt handler removes the return address and flags placed on
the stack by the INT EC, then jumps to the appropriate function
--------r-ED---------------------------------
INT ED - IBM ROM BASIC - used while in interpreter
Notes: called by ROM BASIC, but pointed at IRET by BASIC.COM/BASICA.COM
BASIC.COM/BASICA.COM do not restore vector on termination
INT 80 through INT ED are modified but not restored by Direct Access
v4.0, and may be left dangling by other programs written with the
same version of compiled BASIC
SeeAlso: INT EC"BASIC",INT EE"BASIC"
--------r-EE---------------------------------
INT EE - IBM ROM BASIC - used while in interpreter
Notes: called by ROM BASIC, but pointed at IRET by BASIC.COM/BASICA.COM
BASIC.COM/BASICA.COM do not restore vector on termination
SeeAlso: INT ED"BASIC",INT EE"BASIC"
--------r-EF---------------------------------
INT EF - BASIC - ORIGINAL INT 09 VECTOR
Note: BASIC.COM/BASICA.COM do not restore vector on termination
SeeAlso: INT EE"BASIC",INT F0"BASIC"
--------O-EF----CX0473-----------------------
INT EF - GEM - INTERFACE
CX = 0473h
DS:DX -> GEM parameter block
--------r-F0---------------------------------
INT F0 - BASICA.COM, GWBASIC, compiled BASIC - ORIGINAL INT 08 VECTOR
Note: BASICA.COM does not restore vector on termination
SeeAlso: INT EF"BASIC"
--------*-F1---------------------------------
INT F1 - reserved for user interrupt
--------s-F1---------------------------------
INT F1 - SPEECH.COM - CONVERT TEXT STRING TO SPEECH
DS:BX -> '$'-terminated text string
Return: nothing
Program: SPEECH.COM is a resident text-to-speech converter by Douglas Sisco
--------s-F1---------------------------------
INT F1 - Andy C. McGuire SPEECH.COM/SAY.COM
SeeAlso: INT F2"SPEECH"
--------U-F1---------------------------------
INT F1 - AQUEDUCT, PIPELINE - GET DATA AREA ADDRESS
Return: AX:BX -> data area
Program: AQUEDUCT and PIPELINE are TSRs by James W. Birdsall to connect COM1
and COM2 in software
Note: The installation check consists of testing for the following signature
immediately preceding the interrupt handler: "JWBtvv" where 't' is
either "A" for AQUEDUCT or "P" for PIPELINE and "vv" is a two-digit
version number
Index: installation check;AQUEDUCT|installation check;PIPELINE
--------N-F1---------------------------------
INT F1 - NetWare Remote Boot - INSTALLATION CHECK (NOT A VECTOR!)
Note: if this vector contains the value 5774654Eh ("NetW"), the remote boot
BIOS extension is active, and access to the floppy disk is redirected
to an image file in the server's SYS:LOGIN directory
SeeAlso: INT F2"NetWare",INT F3"NetWare",INT F4"NetWare"
--------v-F1---------------------------------
INT F1 - VIRUS - "Violetta" - ???
Note: used but not chained by virus
SeeAlso: INT E0"VIRUS",INT FF"VIRUS"
----------F101-------------------------------
INT F1 - Common ISDN API (CAPI) v1.1 - "API-REGISTER" - INITIALIZE CAPI
AH = 01h
ES:BX -> buffer for CAPI's use (see note)
CX = minimum number of pending messages
DX = maximum simultaneous Level 3 connections
SI = maximum concurrent received B3 data blocks
DI = maximum B3 data block size
Return: AX = CAPI-assigned application ID
0000h on error
BX = error number
1001h registration error
Range: INT 00 to INT FF, selectable by program parameter
Notes: the caller is required to provide at least 512 bytes of stack space
the CAPI interrupt handler begins with a header which is nearly
identical to the IBM Interrupt Sharing Protocol header
(see #1825 at INT 2D), except that the short jump instruction to
a hardware reset handler at offset 09h is replaced by the signature
bytes "IA"
the maximum length of a message is fixed at 180 bytes; the standard
document suggests using CX=10, DI=1, SI=7, and DI=130 for
applications which use only a single connection and standard
protocols
the total size of the application-provided buffer must be at least
180*CX + DX*SI*DI bytes
SeeAlso: AH=02h,INT F1/AL=01h
Index: installation check;Common ISDN API
----------F1--01-----------------------------
INT F1 - Common ISDN API (CAPI) v2.0 - "CAPI_REGISTER" - INITIALIZE CAPI
AL = 01h
AH = CAPI version number * 10 (14h for v2.0)
ES:BX -> buffer for CAPI's use (see note)
CX = number of bytes for message buffer
DX = maximum simultaneous logical (Level 3) connections
SI = maximum concurrent received B3 data blocks (min. 2)
DI = maximum B3 data block size (up to 2048 bytes)
Return: AX = CAPI-assigned application ID
0000h on error
BX = error number
1001h registration error
Range: INT 00 to INT FF, selectable by program parameter
Notes: the caller is required to provide at least 512 bytes of stack space
the CAPI interrupt handler begins with a header (see #3158) which is
nearly identical to the IBM Interrupt Sharing Protocol header
(see #1825 at INT 2D), except that the short jump instruction to
a hardware reset handler at offset 09h is replaced by the signature
bytes "IA"
the standard document suggests using 1024 + (1024*DX) bytes for the
message buffer for typical applications
the total size of the application-provided buffer must be at least
CX + DX*SI*DI bytes
SeeAlso: AH=01h,INT F1/AL=02h
Index: installation check;Common ISDN API

Format of CAPI v2.0 interrupt handler entry point:
Offset Size Description (Table 3158)
00h 2 BYTEs short jump to actual start of interrupt handler, immediately
following this data block (EBh 0Fh)
02h DWORD address of next handler in chain
06h WORD signature 424Bh
08h BYTE EOI flag (80h)
80h primary hardware interrupt handler (will issue EOI)
09h 2 BYTEs reserved (0)
(is short jump to hardware reset routine in ISP header)
0Bh 4 BYTEs signature "CAPI"
0Fh 2 BYTEs two-digit CAPI version number in ASCII ('20')
SeeAlso: #1825 at INT 2D
----------F102-------------------------------
INT F1 - Common ISDN API (CAPI) v1.1 - "API-RELEASE" - UNREGISTER FROM CAPI
AH = 02h
DX = application ID (see AH=01h)
Return: AX = status (0000h,1002h) (see #3159)
Notes: the caller is required to provide at least 512 bytes of stack space
SeeAlso: AH=01h,INT F1/AL=02h

(Table 3159)
Values for CAPI v1.1 error code:
0000h successful
1001h registration error
1002h invalid application ID
1003h message too small or incorrectly coded message number
1004h invalid command or subcommand
1005h message queue full
1006h message queue empty
1007h message(s) lost due to queue overflow
1008h error uninstalling
SeeAlso: #3160
----------F1--02-----------------------------
INT F1 - Common ISDN API (CAPI) v2.0 - "CAPI_RELEASE" - UNREGISTER FROM CAPI
AL = 02h
AH = CAPI version number * 10 (14h for v2.0)
DX = application ID (see INT F1/AL=01h)
Return: AX = status (0000h,11xxh) (see #3160)
Notes: the caller is required to provide at least 512 bytes of stack space
SeeAlso: AH=02h,INT F1/AL=01h,INT F1/AL=03h

(Table 3160)
Values for CAPI v2.0 error code:
0000h successful
1001h too many applications
1002h logical block size too small (must be at least 128 bytes)
1003h buffer > 64K
1004h message buffer too small (minimum 1024 bytes)
1005h too many logical connections requested
1006h reserved
1007h could not register because CAPI busy, try again
1008h OS resource unavailable (out of memory, etc.)
1009h COMMON-ISDN-API not installed
100Ah controller does not support external equipment
100Bh controller supports only external equipment
1101h invalid application ID
1102h illegal comand or subcommand, or message too short
1103h message queue full
1104h queue empty
1105h queue overflowed (message lost)
1106h unknown notification parameter
1107h could not accept message because CAPI busy, try again
1108h OS resource unavailable (out of memory, etc.)
1109h COMMON-ISDN-API not installed
110Ah controller does not support external equipment
110Bh controller supports only external equipment
2001h message not supported in current state
2002h illegal controller/PLCI/NCCI
2003h out of PLCI
2004h out of NCCI
2005h out of LISTEN
2006h out of FAX resources (T.30 protocol)
2007h illegal message parameter coding
3001h unsupported B1 protocol
3002h unsupported B2 protocol
3003h unsupported B3 protocol
3004h unsupported B1 protocol parameter
3005h unsupported B2 protocol parameter
3006h unsupported B3 protocol parameter
3007h unsupported B protocol combination
3008h NCPI not supported
3009h unknown CIP value
300Ah unsupported flags (reserved bits set)
300Bh unsupported facility
300Ch data length not supported by current protocol
300Dh reset procedure not supported by current protocol
SeeAlso: #3159
----------F103-------------------------------
INT F1 - Common ISDN API (CAPI) v1.1 - "API-PUT-MESSAGE"
AH = 03h
DX = application ID (see AH=01h)
ES:BX -> message to be sent (see #3161)
Return: AX = status (0000h,1002h,1003h,1004h,1005h) (see #3159)
Notes: the caller is required to provide at least 512 bytes of stack space
the message buffer may be reused as soon as this call returns
SeeAlso: AH=01h,AH=04h,INT F1/AL=03h

Format of CAPI message:
Offset Size Description (Table 3161)
00h WORD total message length, including header
02h WORD application ID (see AH=01h)
04h BYTE command (see #3162,#3163)
05h BYTE subcommand (see #3162,#3163)
06h WORD message sequence number
0000h-7FFFh messages from application to CAPI (and replies)
8000h-FFFFh messages from CAPI to application (and replies)
08h var message data (max 172 bytes for v1.1 only)

(Table 3162)
Values for CAPI v1.1 message command/subcommand:
Cmd/SubCmd Name Description
01h/00h RESET-B3-REQ request resetting of a Level 3 connection
01h/01h RESET-B3-CONF confirm Level 3 connection reset
01h/02h RESET-B3-IND indication from CAPI that Level 3 conn. reset
01h/03h RESET-B3-RESP confirm receipt of RESET-B3-IND
02h/00h CONNECT-REQ establish B-channel connection
02h/01h CONNECT-CONF confirm start of connection establishment
02h/02h CONNECT-IND indication from CAPI of incoming connection
02h/03h CONNECT-RESP accept incoming connection
03h/02h CONNECT-ACTIVE-IND indication that B-channel connection complete
03h/03h CONNECT-ACTIVE-RESP confirm connection-complete indication
04h/00h DISCONNECT-REQ request shutdown of B-channel connection
04h/01h DISCONNECT-CONF confirm shutdown of B-channel connection
04h/02h DISCONNECT-IND indication that B-channel is shutting down
04h/03h DISCONNECT-RESP confirm that application knows of shutdown
05h/00h LISTEN-REQ enable indication of incoming connections
05h/01h LISTEN-CONF confirm enabling of incoming conn. indication
06h/00h GET-PARAMS-REQ request B-channel parameters
06h/01h GET-PARAMS-CONF return B-channel parameters
07h/00h INFO-REQ set B-channel info to be signalled to app
07h/01h INFO-CONF confirm B-channel info signalling
07h/02h INFO-IND signal B-channel events to application
07h/03h INFO-CONF confirm receipt of INFO-IND
08h/00h DATA-REQ send D-channel data
08h/01h DATA-CONF confirm receipt of DATA-REQ
08h/02h DATA-IND receive D-channel data
08h/03h DATA-RESP confirm receipt fo DATA-IND
09h/00h CONNECT-INFO-REQ request connection information
09h/01h CONNECT-INFO-CONF return connection information
40h/00h SELECT-B2-PROTOCOL-REQ select Level 2 protocol
40h/01h SELECT-B2-PROTOCOL-CONF confirm receipt of SELECT-B2-PROTOCOL-REQ
80h/00h SELECT-B3-PROTOCOL-REQ select Level 3 protocol
80h/01h SELECT-B3-PROTOCOL-CONF confirm receipt of SELECT-B3-PROTOCOL-REQ
81h/00h LISTEN-B3-REQ enable notification of incoming Level 3 calls
81h/01h LISTEN-B3-CONF confirm receipt of LISTEN-B3-REQ
82h/00h CONNECT-B3-REQ establish Level 3 connection
82h/01h CONNECT-B3-CONF confirm start of connection establishment
82h/02h CONNECT-B3-IND indication of incoming Level 3 connection
82h/03h CONNECT-B3-RESP accept incoming connection
83h/02h CONNECT-B3-ACTIVE-IND indication that Level 3 connection complete
83h/03h CONNECT-B3-ACTIVE-RESP confirm connection-complete indication
84h/00h DISCONNECT-B3-REQ request shutdown of Level 3 connection
84h/01h DISCONNECT-B3-CONF confirm shutdown of Level 3 connection
84h/02h DISCONNECT-B3-IND indication that Level 3 is shutting down
84h/03h DISCONNECT-B3-RESP confirm that application knows of shutdown
85h/00h GET-B3-PARAMS-REQ request Level 3 parameters
85h/01h GET-B3-PARAMS-CONF return Level 3 parameters
86h/00h DATA-B3-REQ send data on Level 3
86h/01h DATA-B3-CONF confirm sending of Level 3 data
86h/02h DATA-B3-IND indication of incoming Level 3 data
86h/03h DATA-B3-RESP confirm receipt of Level 3 data
87h/02h HANDSET-IND indication of Handset events
87h/03h HANDSET-RESP confirm receipt of Handset event
FFh/00h MANUFACTURER-REQ vendor-specific request
FFh/01h MANUFACTURER-CONF vendor-specific request confirmation
FFh/02h MANUFACTURER-IND vendor-specific notification
FFh/03h MANUFACTURER-RESP vendor-specific notification confirmation
SeeAlso: #3161,#3163
----------F1--03-----------------------------
INT F1 - Common ISDN API (CAPI) v2.0 - "CAPI_PUT_MESSAGE"
AL = 03h
AH = CAPI version number * 10 (14h for v2.0)
DX = application ID (see INT F1/AL=01h)
ES:BX -> message to be sent (see #3161)
Return: AX = status (0000h,11xxh) (see #3160)
Notes: the caller is required to provide at least 512 bytes of stack space
the message buffer may be reused as soon as this call returns
SeeAlso: AH=03h,INT F1/AL=01h,INT F1/AL=04h

(Table 3163)
Values for CAPI v2.0 message command/subcommand:
Cmd/SubCmd Name Description
01h/80h ALERT_REQ indicate compatibility with incoming calls
01h/81h ALERT_CONF confirm receipt of ALERT_REQ
02h/80h CONNECT_REQ establish B-channel connection
02h/81h CONNECT_CONF confirm start of connection establishment
02h/82h CONNECT_IND indication from CAPI of incoming connection
02h/83h CONNECT_RESP accept incoming connection
03h/82h CONNECT_ACTIVE_IND indication that B-channel connection complete
03h/83h CONNECT_ACTIVE_RESP confirm connection-complete indication
04h/80h DISCONNECT_REQ request shutdown of B-channel connection
04h/81h DISCONNECT_CONF confirm shutdown of B-channel connection
04h/82h DISCONNECT_IND indication that B-channel is shutting down
04h/83h DISCONNECT_RESP confirm that application knows of shutdown
05h/80h LISTEN_REQ enable signalling on incoming events
05h/81h LISTEN_CONF confirm enabling of incoming event signalling
08h/80h INFO_REQ send protocol information for physical connect
08h/81h INFO_CONF confirm INFO_REQ
08h/82h INFO_IND indicate event for physical connection
08h/83h INFO_CONF confirm receipt of INFO_IND
41h/80h SELECT_B_PROTOCOL_REQ change protocol on already-active connect
41h/81h SELECT_B_PROTOCOL_CONF confirm receipt of SELECT_B_PROTOCOL_REQ
80h/80h FACILITY_REQ control optional facilities
80h/81h FACILITY_CONF confirm acceptance of FACILITY_REQ
80h/82h FACILITY_IND indicate facility-dependent event
80h/83h FACILITY_RESP confirm receipt of FACILITY_IND
82h/80h CONNECT_B3_REQ establish Level 3 connection
82h/81h CONNECT_B3_CONF confirm start of connection establishment
82h/82h CONNECT_B3_IND indication of incoming Level 3 connection
82h/83h CONNECT_B3_RESP accept incoming connection
83h/82h CONNECT_B3_ACTIVE_IND indication that Level 3 connection complete
83h/83h CONNECT_B3_ACTIVE_RESP confirm connection-complete indication
84h/80h DISCONNECT_B3_REQ request shutdown of Level 3 connection
84h/81h DISCONNECT_B3_CONF confirm shutdown of Level 3 connection
84h/82h DISCONNECT_B3_IND indication that Level 3 is shutting down
84h/83h DISCONNECT_B3_RESP confirm that application knows of shutdown
85h/80h GET_B3_PARAMS_REQ request Level 3 parameters
85h/81h GET_B3_PARAMS_CONF return Level 3 parameters
86h/80h DATA_B3_REQ send data on Level 3
86h/81h DATA_B3_CONF confirm sending of Level 3 data
86h/82h DATA_B3_IND indication of incoming Level 3 data
86h/83h DATA_B3_RESP confirm receipt of Level 3 data
87h/80h RESET_B3_REQ request resetting of a logical connection
87h/81h RESET_B3_CONF confirm logical connection reset
87h/82h RESET_B3_IND indication from CAPI that logical conn. reset
87h/83h RESET_B3_RESP confirm receipt of RESET_B3_IND
88h/82h CONNECT_B3_T90_ACTIVE_IND indicate switch from T.70 to T.90
88h/83h CONNECT_B3_T90_ACTIVE_RESP confirm receipt of T90_ACTIVE_IND
FFh/80h MANUFACTURER_REQ vendor-specific request
FFh/81h MANUFACTURER_CONF vendor-specific request confirmation
FFh/82h MANUFACTURER_IND vendor-specific notification
FFh/83h MANUFACTURER_RESP vendor-specific notification confirmation
SeeAlso: #3161,#3162
----------F104-------------------------------
INT F1 - Common ISDN API (CAPI) v1.1 - "API-GET-MESSAGE"
AH = 04h
DX = application ID (see AH=01h)
Return: AX = status (0000h,1002h,1006h,1007h) (see #3159)
ES:BX -> message if successful (see #3161)
Range: INT 00 to INT FF, selectable by program parameter
Notes: the caller is required to provide at least 512 bytes of stack space
the returned message may be overwritten by the next call to this
function
SeeAlso: AH=03h
----------F1--04-----------------------------
INT F1 - Common ISDN API (CAPI) v2.0 - "CAPI_GET_MESSAGE"
AL = 04h
AH = CAPI version number * 10 (14h for v2.0)
DX = application ID (see AH=01h)
Return: AX = status (0000h,11xxh) (see #3160)
ES:BX -> message if successful (see #3161)
Range: INT 00 to INT FF, selectable by program parameter
Notes: the caller is required to provide at least 512 bytes of stack space
the returned message may be overwritten by the next call to this
function
SeeAlso: AH=04h,INT F1/AL=03h
----------F105-------------------------------
INT F1 - Common ISDN API (CAPI) v1.1 - "API-SET-SIGNAL" - SIGNAL HANDLING
AH = 05h
DX = application ID (see AH=01h)
ES:BX -> signal handler or 0000h:0000h to disable
Return: AX = status (0000h,1002h) (see #3159)
Notes: the caller is required to provide at least 512 bytes of stack space
the signal handler is called as though it were an interrupt, with
interrupts disabled; the handler must preserve all registers and
return with an IRET
SeeAlso: AH=01h
----------F1--05-----------------------------
INT F1 - Common ISDN API (CAPI) v2.0 - "CAPI_SET_SIGNAL" - SIGNAL HANDLING
AL = 05h
AH = CAPI version number * 10 (14h for v2.0)
DX = application ID (see AH=01h)
ES:BX -> signal handler or 0000h:0000h to disable
SI:DI = parameter to pass to signal handler
Return: AX = status (0000h,11xxh) (see #3160)
Notes: the caller is required to provide at least 512 bytes of stack space
the signal handler is called as though it were an interrupt, with
interrupts disabled and DX,SI,DI set as they were when this function
was called; the handler must preserve all registers and return with
an IRET
the signal handler may call CAPI_PUT_MESSAGE, CAPI_GET_MESSAGE, and
CAPI_SET_SIGNAL
SeeAlso: INT F1/AL=01h
----------F106-------------------------------
INT F1 - Common ISDN API (CAPI) v1.1 - "API-DEINSTALL" - UNINSTALL
AH = 06h
BX = force flag
0000h normal uninstall
0001h forced uninstall
Return: AX = status (0000h,1008h) (see #3159)
Desc: reset ISDN controller, close all ISDN Level 1 connections except for
telephone connections
Notes: the caller is required to provide at least 512 bytes of stack space
----------F1F0-------------------------------
INT F1 - Common ISDN API (CAPI) v1.1 - "API-GET-MANUFACTURER"
AH = F0h
ES:BX -> 64-byte buffer for manufacturer identification information
Return: ES:BX buffer filled with ASCIZ idnetification string
Range: INT 00 to INT FF, selectable by program parameter
Notes: the caller is required to provide at least 512 bytes of stack space
SeeAlso: AH=01h,AH=F1h,AH=F2h,AH=FFh,INT F1/AL=F0h
----------F1--F0-----------------------------
INT F1 - Common ISDN API (CAPI) v2.0 - "CAPI_GET_MANUFACTURER"
AL = F0h
AH = CAPI version number * 10 (14h for v2.0)
ES:BX -> 64-byte buffer for manufacturer identification information
Return: ES:BX buffer filled with ASCIZ idnetification string
Range: INT 00 to INT FF, selectable by program parameter
Notes: the caller is required to provide at least 512 bytes of stack space
SeeAlso: AH=F0h,INT F1/AL=01h,INT F1/AL=F1h,INT F1/AL=F2h,INT F1/AL=FFh
----------F1F1-------------------------------
INT F1 - Common ISDN API (CAPI) v1.1 - "API-GET-VERSION"
AH = F1h
ES:BX -> 64-byte buffer for CAPI version number
Return: ES:BX buffer filled with ASCIZ version string
Notes: the caller is required to provide at least 512 bytes of stack space
SeeAlso: AH=01h,AH=F0h,AH=F2h,AH=FFh
----------F1--F1-----------------------------
INT F1 - Common ISDN API (CAPI) v2.0 - "CAPI_GET_VERSION"
AL = F1h
AH = CAPI version number * 10 (14h for v2.0)
Return: AH = CAPI major version number
AL = CAPI minor version number
DH = vendor-specific major version
DL = vendor-specific minor version
Notes: the caller is required to provide at least 512 bytes of stack space
SeeAlso: AH=F1h,INT F1/AL=01h,INT F1/AL=F0h,INT F1/AL=F2h,INT F1/AL=FFh
----------F1F2-------------------------------
INT F1 - Common ISDN API (CAPI) v1.1 - "API-GET-SERIAL-NUMBER"
AH = F2h
ES:BX -> 64-byte buffer for CAPI serial number
Return: ES:BX buffer filled with ASCIZ serial number (seven digits), empty
string if no serial number
Notes: the caller is required to provide at least 512 bytes of stack space
SeeAlso: AH=01h,AH=F0h,AH=F1h,AH=FFh
----------F1--F2-----------------------------
INT F1 - Common ISDN API (CAPI) v2.0 - "CAPI_GET_SERIAL_NUMBER"
AL = F2h
AH = CAPI version number * 10 (14h for v2.0)
ES:BX -> 64-byte buffer for CAPI serial number
Return: ES:BX buffer filled with ASCIZ serial number (seven digits), empty
string if no serial number
Notes: the caller is required to provide at least 512 bytes of stack space
SeeAlso: AH=F2h,INT F1/AL=01h,INT F1/AL=F0h,INT F1/AL=F1h,INT F1/AH=F3h
----------F1--F3-----------------------------
INT F1 - Common ISDN API (CAPI) v2.0 - "CAPI_GET_PROFILE" - GET CAPABILITIES
AL = F3h
AH = CAPI version number * 10 (14h for v2.0)
ES:BX -> 64-byte buffer for CAPI capabilities (see #3164)
CX = controller number (01h-06h) or 0000h to get number of controllers
Return: AX = status (0000h,11xxh) (see #3160)
ES:BX buffer filled if successful
Notes: the caller is required to provide at least 512 bytes of stack space
SeeAlso: INT F1/AL=01h,INT F1/AL=F0h,INT F1/AL=F2h,INT F1/AH=FFh

Format of CAPI v2.0 capabilities:
Offset Size Description (Table 3164)
00h WORD number of installed controllers
02h WORD number of supported B channels
04h DWORD global options (see #3165)
08h DWORD B1 protocol support flags (see #3166)
0Ch DWORD B2 protocol support flags (see #3167)
10h DWORD B3 protocol support flags (see #3168)
14h 24 BYTEs reserved for CAPI use
2Ch 20 BYTEs vendor-specific information

Bitfields for CAPI v2.0 global options:
Bit(s) Description (Table 3165)
0 internal controller supported
1 external controller supported
2 handset supported (only if bit 1 also set)
3 DTMF supported
4-31 reserved (0)
SeeAlso: #3164

Bitfields for CAPI v2.0 B1 protocol support:
Bit(s) Description (Table 3166)
0 64k bps with HDLC framing (required, always set)
1 64k bps bit-transparent operation with network byte framing
2 V.110 asynchronous with start/stop byte framing
3 V.110 synchronous with HDLC framing
4 T.30 modem for group 3 FAX
5 64k bps inverted with HDLC framing
6 56k bps bit-transparent operation with network byte framing
7-31 reserved (0)
SeeAlso: #3164

Bitfields for CAPI v2.0 B2 protocol support:
Bit(s) Description (Table 3167)
0 ISO 7776 (X.75 SLP) (required, always set)
1 transparent
2 SDLC
3 Q.921 LAPD (D-channel X.25)
4 T.30 for group 3 FAX
5 point-to-point protocol (PPP)
6 transparent (ignoring B1 framing errors)
7-31 reserved (0)
SeeAlso: #3164

Bitfields for CAPI v2.0 B3 protocol support:
Bit(s) Description (Table 3168)
0 transparent (required, always set)
1 T.90NL with T.70NL compatibility
2 ISO 8208 (X.25 DTE-DTE)
3 X.25 DCE
4 T.30 for group 3 FAX
5-31 reserved (0)
SeeAlso: #3164
----------F1FF-------------------------------
INT F1 - Common ISDN API (CAPI) v1.1 - "API-MANUFACTURER" - VENDOR-SPECIFIC
AH = FFh
other registers vendor-specific
Return: registers vendor-specific
Range: INT 00 to INT FF, selectable by program parameter
Notes: the caller is required to provide at least 512 bytes of stack space
SeeAlso: AH=01h,AH=F0h,AH=F1h,AH=F2h,INT F1/AH=FFh
----------F1--FF-----------------------------
INT F1 - Common ISDN API (CAPI) v2.0 - "CAPI_MANUFACTURER" - VENDOR-SPECIFIC
AL = FFh
AH = CAPI version number * 10 (14h for v2.0)
other registers vendor-specific
Return: registers vendor-specific
Range: INT 00 to INT FF, selectable by program parameter
Notes: the caller is required to provide at least 512 bytes of stack space
SeeAlso: AH=FFh,INT F1/AL=01h,INT F1/AL=F0h,INT F1/AL=F1h,INT F1/AL=F2h
--------*-F2---------------------------------
INT F2 - reserved for user interrupt
--------s-F2---------------------------------
INT F2 - Andy C. McGuire SPEECH.COM/SAY.COM
SeeAlso: INT F1"SPEECH"
--------N-F2---------------------------------
INT F2 - NetWare Remote Boot - ORIGINAL INT 13
SeeAlso: INT F1"NetWare",INT F3"NetWare",INT F4"NetWare"
----------F2---------------------------------
INT F2 - ICCTSR 1.0 - ImageCapture COLOR Developer's Kit - API
AH = function number (see #3169)
???
Return: ???
Program: ImageCapture is a product of International Computers
SeeAlso: INT F3"ICCTSR"

(Table 3169)
Values for ImageCapture function:
01h power up
02h power down
03h set controls
04h capture image
05h display image
06h read file
07h write file
08h write array
09h read pixel
0Ah write pixel
0Bh check if VGA present
0Ch set video mode
0Dh check for keystroke
0Eh delay
--------*-F3---------------------------------
INT F3 - reserved for user interrupt
--------s-F3---------------------------------
INT F3 - SoundBlaster - POINTER TO ECHO VALUE
Note: this is not a vector, but a pointer to a DWORD containing the echo
value selected with SET-ECHO.EXE
SeeAlso: INT 2F/AX=FBFBh
----------F3---------------------------------
INT F3 - ICCTSR 1.0 - HANDSHAKE ID VECTOR
Program: ImageCapture is a product of International Computers
SeeAlso: INT F2"ICCTSR"
--------N-F3---------------------------------
INT F3 - NetWare Remote Boot - BOOT ROM'S INT 13 HANDLER
SeeAlso: INT F1"NetWare",INT F2"NetWare",INT F4"NetWare"
--------*-F4---------------------------------
INT F4 - reserved for user interrupt
--------T-F4---------------------------------
INT F4 - DoubleDOS - GIVE UP REST OF CURRENT CLOCK TICK AND ALL OF NEXT TICK
SeeAlso: INT 21/AH=EEh"DoubleDOS",INT FE"DoubleDOS"
--------N-F4---------------------------------
INT F4 - NetWare Remote Boot - ???
SeeAlso: INT F1"NetWare",INT F2"NetWare",INT F3"NetWare"
--------*-F5---------------------------------
INT F5 - reserved for user interrupt
--------T-F5---------------------------------
INT F5 - DoubleDOS - ???
--------*-F6---------------------------------
INT F6 - reserved for user interrupt
--------T-F6---------------------------------
INT F6 - DoubleDOS - ???
--------*-F7---------------------------------
INT F7 - reserved for user interrupt
--------T-F7---------------------------------
INT F7 - DoubleDOS - ???
----------F700-------------------------------
INT F7 - FSBBS 2.0 - CONFIGURATION RECORD
AH = 00h
AL = function
00h get configuration record
Return: DS:DX -> configuration record
01h set configuration record
02h get path for option
DS:DX -> option name
Return: DS:DX -> path
03h determine whether configuration record set
Return: AX = status
0000h set
0001h not yet set
04h get link state
Return: AX = state
0000h unlinked
0001h linked
Notes: this information is preliminary and still subject to change
all of the INT F7 calls for FSBBS are used for interprogram
communication between the BBS kernel and the programs it spawns
SeeAlso: AH=01h
----------F701-------------------------------
INT F7 - FSBBS 2.0 - USER RECORD
AH = 01h
AL = function
00h get user record for user currently online
Return: DS:DX -> user record
01h set user record
DS:DX -> user record
SeeAlso: AH=00h,AH=02h
----------F702-------------------------------
INT F7 - FSBBS 2.0 - GET ACCOUNT NAME
AH = 02h
Return: DS:DX -> 8-character blank-padded account name
SeeAlso: AH=01h
----------F703-------------------------------
INT F7 - FSBBS 2.0 - TERMINAL NUMBER
AH = 03h
AL = function
00h get terminal index number
Return: DX = index number
01h set terminal index number
DX = terminal index
----------F704-------------------------------
INT F7 - FSBBS 2.0 - PASSDATA BUFFER
AH = 04h
AL = function
00h get PassData buffer contents
DS:DX -> buffer for PassData contents
01h set PassData contents
DS:DX -> buffer containing new PassData
CH = length of data in buffer
----------F705-------------------------------
INT F7 - FSBBS 2.0 - TIMER FUNCTIONS
AH = 05h
AL = function
00h get time remaining
Return: DX = number of minutes remaining
01h get current time
Return: DS:DX -> 8-character time string
02h increment time
DX = number of additional minutes
03h decrement time
DX = number of minutes
SeeAlso: AH=06h
----------F706-------------------------------
INT F7 - FSBBS 2.0 - FUNCTION AVAILABILITY
AH = 06h
AL = function
00h determine whether function is available
DX = index of function
01h set function availability
DX = index of function
???
SeeAlso: AH=05h,AH=07h
----------F707-------------------------------
INT F7 - FSBBS 2.0 - DUMP FUNCTIONS
AH = 07h
AL = function
00h get current dump mode
Return: DL = mode
01h set dump mode
DL = mode
SeeAlso: AH=06h
--------*-F8---------------------------------
INT F8 - reserved for user interrupt
--------h-F8---------------------------------
INT F8 - Sanyo MBC-550 - IRQ0 - 100 HZ INTERRUPT
SeeAlso: INT 08"IRQ0",INT F9"Sanyo",INT FA"Sanyo"
--------T-F8---------------------------------
INT F8 - DoubleDOS - ???
--------*-F9---------------------------------
INT F9 - reserved for user interrupt
--------T-F9---------------------------------
INT F9 - DoubleDOS - ???
--------h-F9---------------------------------
INT F9 - Sanyo MBC-550 - IRQ1 - ???
SeeAlso: INT 09"IRQ1",INT F8"Sanyo",INT FA"Sanyo"
--------*-FA---------------------------------
INT FA - reserved for user interrupt
--------h-FA---------------------------------
INT FA - Sanyo MBC-550 - IRQ2 - SERIAL PORT USART INTERRUPT
Note: this vector is not used on the Tandy 1000TL
SeeAlso: INT 0A"IRQ2",INT F9"Sanyo",INT FB"Sanyo"
--------T-FA---------------------------------
INT FA - DoubleDOS - TURN OFF TIMESHARING
SeeAlso: INT 21/AH=EAh"DoubleDOS",INT FB"DoubleDOS"
--------*-FB---------------------------------
INT FB - reserved for user interrupt
--------h-FB---------------------------------
INT FB - Sanyo MBC-550 - IRQ3 - KEYBOARD USART RECEIVE INTERRUPT
SeeAlso: INT 0B"IRQ3",INT FA"Sanyo",INT FC"Sanyo"
--------T-FB---------------------------------
INT FB - DoubleDOS - TURN ON TIMESHARING
SeeAlso: INT 21/AH=EBh"DoubleDOS",INT FA"DoubleDOS"
--------*-FC---------------------------------
INT FC - reserved for user interrupt
--------T-FC---------------------------------
INT FC - DoubleDOS - GET CURRENT SCREEN BUFFER ADDRESS
Return: ES = segment of display buffer
Desc: determine the address of the virtual screen to which the program
should write instead of the actual video memory, so that the
multitasked programs do not interfere with each other's output
Note: the display buffer may be moved if multitasking is enabled
SeeAlso: INT 21/AH=ECh"DoubleDOS",INT FB"DoubleDOS"
--------h-FC---------------------------------
INT FC - Sanyo MBC-550 - IRQ4 - ???
SeeAlso: INT 0C"IRQ4",INT FB"Sanyo",INT FD"Sanyo"
--------*-FD---------------------------------
INT FD - reserved for user interrupt
--------T-FD---------------------------------
INT FD - DoubleDOS - ???
--------h-FD---------------------------------
INT FD - Sanyo MBC-550 - IRQ5 - ???
SeeAlso: INT 0D"IRQ5",INT FC"Sanyo",INT FE"Sanyo"
--------S-FD---------------------------------
INT FD - TFPCX - INSTALLATION CHECK
AH = function (see separate entries below)
Program: TFPCX is an interface between modem and terminal program for packet-
radio communications
Notes: the installation check consists of testing for the string "N5NX" three
bytes beyond the interrupt handler; INT FD is the default, but may
be changed, so the full installation check consists of scanning
for the signature
TFPCX returns AX=FFFFh on any unsupported function call
SeeAlso: AH=01h,AH=03h,AH=FEh
--------S-FD01-------------------------------
INT FD - TFPCX - TEST FOR CHARACTER WAITING
AH = 01h
Return: AX = status
0000h no characters waiting
0001h character available for input
Program: TFPCX is an interface between modem and terminal program for packet-
radio communications
SeeAlso: AH=02h
--------S-FD02-------------------------------
INT FD - TFPCX - GET CHARACTER
AH = 02h
Return: AL = character
Notes: this call is only allowed if AH=01h indicated that a character is
available
all available characters should be read before sending any additional
characters
SeeAlso: AH=01h,AH=03h
--------S-FD03-------------------------------
INT FD - TFPCX - OUTPUT CHARACTER

AH = 03h
AL = character to send
Return: nothing
SeeAlso: AH=02h
--------S-FDFE-------------------------------
INT FD - TFPCX - GET VERSION
AH = FEh
Return: AH = major version
AL = minor version
Program: TFPCX is an interface between modem and terminal program for packet-
radio communications
SeeAlso: AH=01h,AH=03h
--------B-FE---------------------------------
INT FE - AT/XT286/PS50+ - destroyed by return from protected mode
Note: the ROM BIOS uses 0030h:0100h as the initial stack on startup, which
is the last fourth of the interrupt vector table. If the processor
is returned to real mode via a hardware reset (the only possibility
on an 80286, though there are a number of ways of generating one),
then the BIOS startup code stacks three words on its scratch stack
before determining that a return to real mode has been requested.
As a result, INT FE and INT FF are corrupted.
SeeAlso: INT FF"XT286"
--------T-FE---------------------------------
INT FE - DoubleDOS - GIVE UP TIME
AL = number of 55ms time slices to give away
Return: after other program (if active) has run
SeeAlso: INT 21/AH=EEh"DoubleDOS",INT F4"DoubleDOS"
--------G-FE---------------------------------
INT FE - Turbo Debugger 8086 v2.5+ - OVERLAY MANAGER
SeeAlso: INT 3F
--------h-FE---------------------------------
INT FE - Sanyo MBC-550 - IRQ6 - ???
SeeAlso: INT 0E"IRQ6",INT FD"Sanyo",INT FF"Sanyo"
--------B-FF---------------------------------
INT FF - AT/XT286/PS50+ - destroyed by return from protected mode
Note: (see INT FE"XT286")
SeeAlso: INT FE"XT286"
--------b-FF---------------------------------
INT FF - Z100 - WARM BOOT
SeeAlso: INT 40"Z100"
--------h-FF---------------------------------
INT FF - Sanyo MBC-550 - IRQ7 - ???
SeeAlso: INT 0F"IRQ7",INT FE"Sanyo"
--------Q-FF---------------------------------
INT FF U - QEMM-386.SYS v6.0+ - internal
Notes: requires that a byte in the conventional-memory stub be set to the
desired function number (00h through 0Ch)
SeeAlso: #3170


(Table 3170)
Values for QEMM internal functions:
00h reflect back to Virtual86-mode interrupt handler (default)
01h ???
02h access DR7???
03h QPI upcall (see INT 67/AH=3Fh)
04h ???
05h ???
06h INT 15/AH=87h
07h EMS services (see INT 67/AH=40h,INT 67/AH=5Dh)
08h ???
09h QEMM exception handler
0Ah XMS services (see INT 2F/AX=4310h)
0Bh Virtual DMA Services (see INT 4B/AX=8102h)
0Ch ???
--------v-FF---------------------------------
INT FF - VIRUS - "Violetta" - ???
Note: used but not chained by virus
SeeAlso: INT E0"VIRUS",INT F1"VIRUS"
--------V-FF----BX0000-----------------------
INT FF - PC/FORTH - GRAPHICS API - VIDEO STATUS CHANGE
BX = 0000h
DS:SI -> FORTH program counter
SS:BP -> FORTH parameter stack
SS:SP -> FORTH return stack
DS:DX -> FORTH video parameter area
Desc: called to inform graphics driver of any status changes such as video
mode changes, character color changes, graphics XOR mode turned on
or off, etc.
--------V-FF---------------------------------
INT FF - PC/FORTH - GRAPHICS API
BX = function number
0001h function REDRAW
0002h function !PEL
0003h function @PEL
0004h function LINE
0005h function ARC
0006h function @BLOCK
0007h function !BLOCK
0008h function FLOOD
DS:SI -> FORTH program counter
SS:BP -> FORTH parameter stack
SS:SP -> FORTH return stack
details of parameters not available
--------!---Admin----------------------------
Highest Table Number = 3170
--------!---FILELIST-------------------------
Please redistribute all of the files comprising the interrupt list (listed at
the beginning of the list and in INTERRUP.1ST) unmodified as a group, in a
quartet of archives named INTER48A through INTER48D (preferably the original
authenticated PKZIP archives), the utility programs in a fifth archive
called INTER48E.ZIP, and the WinHelp-related programs in a sixth archive
named INTER48F.ZIP.

This compilation is Copyright (c) 1989,1990,1991,1992,1993,1994,1995 Ralf Brown
--------!---CONTACT_INFO---------------------
Internet: [email protected] (currently forwards to [email protected])
UUCP: {uunet,harvard}!pobox.com!ralf
FIDO: Ralf Brown 1:129/26.1
or post a message to me in the DR_DEBUG echo (I probably won't see it
unless you address it to me)
CIS: >INTERNET:[email protected]


  3 Responses to “Category : Recently Uploaded Files
Archive   : INTER48D.ZIP
Filename : INTERRUP.N

  1. Very nice! Thank you for this wonderful archive. I wonder why I found it only now. Long live the BBS file archives!

  2. This is so awesome! 😀 I’d be cool if you could download an entire archive of this at once, though.

  3. But one thing that puzzles me is the “mtswslnkmcjklsdlsbdmMICROSOFT” string. There is an article about it here. It is definitely worth a read: http://www.os2museum.com/wp/mtswslnk/