Category : Recently Uploaded Files
Archive : CSLAV107.ZIP
Filename : VENDINFO.DIZ
Output of file : VENDINFO.DIZ contained in archive : CSLAV107.ZIP
³ CompuSlave Message Database v1.07 ³
³ SEE BELOW FOR PRODUCT INFORMATION ³
ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ
ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿
³ This is a VENDINFO Product Information Record ³
³ ³
³ This record is a means of conveying information about a software ³
³ product from the author to distributors and users. It contains a ³
³ normal, "human-readable" section (you're reading it now), followed ³
³ by a compressed data record. The data record contains a great ³
³ deal of information in a form useable by automated tools. This ³
³ allows BBSes, disk vendors, etc. to test automatically for ³
³ permission to distribute, and to automatically extract product ³
³ information for use in BBS files databases, vendor catalogs, etc. ³
³ ³
³ The VENDINFO file standard is published and is freely useable. ³
³ ³
³ The VENDINFO toolset includes a free end-user viewer, processing ³
³ tools for use by distributors (BBSes, shareware disk vendors, ³
³ etc.), and the editor used by author/publishers to produce these ³
³ records. These tools are either free or very-low cost shareware. ³
³ The toolset can be obtained from many sources, including the ³
³ originators of VENDINFO: ³
³ ³
³ Rams' Island Software Voice: 303-841-2848 CompuServe: 76244,324 ³
³ 7644 E. Lakecliff Way BBS: 303-841-6269 FidoNet: 1:104/333 ³
³ Parker, CO 80134-5904 USA RIME: RAMSISLE ³
ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ
VENDINFO standard v1.00, produced by VendEdit v1.00, 6-Feb-1995
===== Product Information ==============================
Product: CompuSlave Message Database
Version: 1.07
Version Date: 6-Feb-1995
Product Type: Software
Basic Distribution Policy (see License, below, for details):
Shareware, subject to distribution restrictions
Product Description: CompuSlave v1.07
CompuSlave imports CompuServe forum capture
files into a database, converting them to
individual messages. Add, delete, edit, and
search the entire database for key words or
phrases. Make those messages work for you!
Create your own technical support resource.
Ideal for power users, programmers, and
network administrators. Network support is
included. Easy to use!
Category: For CompuServe
Keywords: CompuSlave CompuServe Message Forum Database
Required Packages: CSLAV107
This Package: CSLAV107
Required Configuration
Processor Family: Intel 80x86 (minimum 80286 (AT))
Minimum OS: MS-DOS 3.3
Standard RAM: 450K
Extended Memory: 1000K
XMS Memory: 0K
Hard Drive Space: 1000K
Required:
Extended Memory
XMS
HIMEM
Hard drive
Keyboard
Orders:
Address: Stevenson Technical Services,
108 2nd Avenue West
PO Box 297
Bertha MN 56437
Phone: 218-924-2050
FAX: 218-924-2050
BBS Name: The STSI BBS
BBS Phone: 218-924-2060
CompuServe: 76300,3066
Internet: [email protected]
Support:
Address: Stevenson Technical Services,
108 2nd Avenue West
PO Box 297
Bertha MN 56437
Phone: 218-924-2050
FAX: 218-924-2050
BBS Name: The STSI BBS
BBS Phone: 218-924-2060
CompuServe: 76300,3066
Internet: [email protected]
===== Information for Users ("READ-ME") ================
This package contains CompuSlave (TM) by Stevenson Technical Services,
Inc. (STSI). This document contains only a brief description of the
package and its features, along with instructions for its installation.
Quite detailed documentation is included in the package, but it is in
archived form, and is more easily read after installation.
CompuSlave is a program designed to import CompuServe forum capture
files into a database, converting them to individual messages. Add,
delete, edit, and search the entire database for key words or phrases.
Make those messages work for you! Create your own technical support
resource. CompuSlave is ideal for power users, programmers, and network
administrators. Network support is included.
CompuSlave is a shareware program. You may use it for up to 2 weeks,
without charge (see CSLAVE.DOC for more details). If you like the
program, and wish to continue its use after this evaluation period, you
are required to pay for the program (see REGISTER.DOC for more details).
Any fee you may have paid to others (disk vendors, dealers, etc.) to
obtain this evaluation version was a fee for their copying and
distribution services, rather than a payment for continued use of the
program.
===== Packing List =====================================
As released by the author or publisher, this package contained the
following files in addition to this VENDINFO.DIZ:
Filename Size Date Time CRC32
READ_ME.1ST 216 6-Feb-1995 01:07a EB5EF01B
READ_ME.BAT 409 6-Feb-1995 01:07a B547ECAC
FILE_ID.DIZ 431 6-Feb-1995 01:07a 074E7A7C
CSLAVE.DOC 62924 6-Feb-1995 01:07a E7C87DE8
REGISTER.DOC 4128 6-Feb-1995 01:07a 62C044D5
VENDOR.DOC 216 6-Feb-1995 01:07a 8C5E6214
WHATSNEW.DOC 4578 6-Feb-1995 01:07a A8F1235D
CSLAVE.EXE 507136 6-Feb-1995 01:07a B27C27ED
INSTALL.EXE 138000 6-Feb-1995 01:07a 17AC24F3
RTM.EXE 108846 6-Feb-1995 01:07a 2E89F6E4
CSLAVE.HLP 27116 6-Feb-1995 01:07a 49669EC0
CSLAVE.INI 245 6-Feb-1995 01:07a AD4F5464
DPMI16BI.OVL 65376 6-Feb-1995 01:07a 04C478A9
INSTALL.REF 16 6-Feb-1995 01:07a 8786A96B
CSLAVE.REV 11884 6-Feb-1995 01:07a 1E2CA040
DESC.SDI 53 6-Feb-1995 01:07a CDF1E3C6
IMPORT.TXT 6365 6-Feb-1995 01:07a E69762F1
===== Installation =====================================
The installation procedure for CompuSlave is quite simple. The package
includes a program, "INSTALL.EXE", which automates the entire process.
You will need about 1 megabyte of available disk space (initially) on
the hard drive on which you plan to install CompuSlave.
The exact steps you need to take will depend on how you received
CompuSlave.
INSTALLING FROM DISKETTES
To install from diskette(s), you need to perform the following steps.
1. Place CompuSlave distribution diskette "Disk 1" in the
appropriate diskette drive.
2. Execute the "INSTALL.EXE" program on the distribution diskette.
For example, if the distribution diskette is on drive A:, type
the MS-DOS command, "a:install".
3. Follow the instructions presented by the installation program. You
will have a chance to approve installation before any changes are
actually made to the contents of your hard drive. The program will
ask you for a destination directory, and will copy the CompuSlave
files to that directory. If you received CompuSlave on two
diskettes, you will need to insert Disk 2 in the diskette drive
when asked to do so. If you so direct it, the installation
program will install executable programs and documentation in
other directories of your choice.
INSTALLING FROM A HARD DRIVE
If you downloaded CompuSlave from a BBS (or received it in the form of
archive files from some other source), you will need to perform the
following steps.
1. Extract the contents of the archive file(s) in a temporary
directory on your hard drive. The procedure for doing this varies,
depending on the form in which you received the package. In all
likelihood, the fact that you are reading this text means that you
already have the necessary tools and knowledge to perform this step.
If not, you should be able to obtain directions for this from the
same source from which you received the package.
2. Execute the "INSTALL.EXE" program which you have extracted. For
example, if the temporary directory into which you have extracted the
program files is C:\TEMPDIR, you would execute the MS-DOS
command, "c:\tempdir\install".
3. Follow the instructions presented by the installation program. You
will have a chance to approve installation before any changes are
actually made to the contents of your hard drive. The program will
ask you for a destination directory, and will copy the program files
to that directory. If you so direct it, the installation program
will install executable programs and documentation in other
directories of your choice.
When you're satisfied that the installation was successful, you should
delete the temporary directory FROM which you installed the program,
(C:\TEMPDIR, in the above discussion), including all its contents.
YOU'RE READY TO GO
Once you've complete the installation, you should consult the documents
(filename extension "doc") which have been installed. In particular,
read at least the "Installation" section of the file CSLAVE.DOC. That
document will tell you how to invoke the program, and will give you
other information you need to properly evaluate CompuSlave. We hope you
enjoy the program.
===== Warranty =========================================
LIMITED WARRANTY
THIS SOFTWARE AND MANUAL ARE PROVIDED FOR EVALUATION ONLY, ON AN "AS
IS" BASIS. STEVENSON TECHNICAL SERVICES, INC. (STSI) DISCLAIMS ALL
WARRANTIES RELATING TO THIS SOFTWARE, WHETHER EXPRESSED OR IMPLIED,
INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE. NEITHER STEVENSON TECHNICAL
SERVICES, INC. (STSI), NOR ANYONE ELSE WHO HAS BEEN INVOLVED IN THE
CREATION, PRODUCTION, OR DELIVERY OF THIS SOFTWARE SHALL BE LIABLE FOR
ANY INDIRECT, CONSEQUENTIAL, OR INCIDENTAL DAMAGES ARISING OUT OF THE
USE OR INABILITY TO USE SUCH SOFTWARE, EVEN IF STEVENSON TECHNICAL
SERVICES, INC. (STSI) HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES OR CLAIMS. THE PERSON USING THE SOFTWARE BEARS ALL RISK AS TO
THE QUALITY AND PERFORMANCE OF THE SOFTWARE.
This agreement shall be governed by the laws of the State of Minnesota
and shall inure to the benefit of Stevenson Technical Services, Inc.
and any successors, administrators, heirs and assigns. Any action or
proceeding brought by either party against the other arising out of or
related to this agreement shall be brought only in a STATE or FEDERAL
COURT of competent jurisdiction located in Todd County, Minnesota. The
parties hereby consent to in personam jurisdiction of said courts.
===== License for Use and Distribution =================
TRIAL USE LICENSE
CompuSlave is NOT a public domain program. It is copyrighted by
Stevenson Technical Services, Inc. (STSI). This software and
accompanying documentation are protected by United States copyright law
and also by international treaty provisions.
Stevenson Technical Services, Inc. (STSI) grants you a limited license
to use this software for evaluation purposes for a period not to exceed
two weeks. If you continue using this software after the two-week
evaluation period, you MUST make a registration payment to Stevenson
Technical Services, Inc. (STSI).
You may not use, copy, rent, lease, sell, modify, decompile,
disassemble, otherwise reverse engineer, or transfer the licensed
program except as provided in this agreement. Any such unauthorized
use shall result in immediate and automatic termination of this license.
All rights not expressly granted here are reserved to Stevenson
Technical Services, Inc. (STSI).
U.S. Government Information: Use, duplication, or disclosure by the
U.S. Government of the computer software and documentation in this
package shall be subject to the restricted rights applicable to
commercial computer software as set forth in subdivision (b)(3)(ii) of
the Rights in Technical Data and Computer Software clause at
252.227-7013 (DFARS 52.227-7013). The Contractor/manufacturer is
Stevenson Technical Services, Inc. (STSI), 108 2nd Avenue West,
PO Box 297, Bertha, MN 56437.
Stevenson Technical Services, Inc. may revoke any permissions granted
here, by notifying you in writing. All rights not expressly
granted here are reserved to Stevenson Technical Services, Inc.
===== Compressed Data Record Follows ===================
PK
UwF _Øu # VENDDATA.v . N . & & 7 .> 4^> þ ~ ^ þ.n ¿/_?O )& ' ;' , < \g··÷gÑbeÆÎÎÌòÊ°*ö³(¹è<#¦äÀ%8Ïà ëîy:ðQ°Àú;ת}c}Éuð¬;/õþØoxéoä]ÚjÆ;se½mîòãþ Þõ}ùÏÚyúÓ¾ÞÚÏÙ"ßÑɹÉm-?Z©ÞXB,ÏB,¾á¹AùyYti~U)ÄV±ÅØ!¶"ÐIq
|ùýêV~##Îÿ.ë;¹¼øxÓÙµê<
Ò橯ýãU~Òøm½íÎ[öÌKò¥úaþÛ²oÉÛÞ¿õ×Ä×cëÿXo¤s{÷O ?P»#?÷á'´;ò Ïóî¦ýã}ÓQ¿ã#þ{ÔíÀú±¯rïÓM»ÓåÕ>{¿2ÏöíNuS§W«Ýi,ÿË æ)忽¶-Û8Lo]î VbX>^±e^áòÚ ùÍÆ>ªÄPy ?:4·×NSÙ¶%õu<ÖÉÌäï{ùßÅY ÔþîÛPNí¶;Öx÷ßeØwóµ§ÜHßÆïãW³×'¨Y/å¢ýÌôÆÛ7´£ÝHsWî.Æþ´Ø q¦Û ä¯ÎIw"åW 2EôR·J´~¦ËÊvÛF÷XûýîTÂó¨2t eOhw,ã>eÈ/¹Ý¡ õ%kw(ë ù!à
áá+Öª!ê
` $D¨"gÆág
¸ ï¼·¤ð¼´ âý ð~^þOÐ[
Ë¿¨¸Ôãcîá'(.(+æ#Cx!ÈlÃTu$pÏFôV£EÊyuGojb8I*7ë*h$NSæÎ
UwF _Øu # VENDDATA.PK * C
Very nice! Thank you for this wonderful archive. I wonder why I found it only now. Long live the BBS file archives!
This is so awesome! 😀 I’d be cool if you could download an entire archive of this at once, though.
But one thing that puzzles me is the “mtswslnkmcjklsdlsbdmMICROSOFT” string. There is an article about it here. It is definitely worth a read: http://www.os2museum.com/wp/mtswslnk/