Dec 282017
 
The supplemental files for DOS 6.22. From MSBBS.
File SUP622.ZIP from The Programmer’s Corner in
Category Tutorials + Patches
The supplemental files for DOS 6.22. From MSBBS.
File Name File Size Zip Size Zip Type
4201.CP_ 2399 2399 stored
4208.CP_ 359 359 stored
5202.CP_ 260 260 stored
720ID01.BAT 109 85 deflated
720ID02.BAT 109 85 deflated
8514.VI_ 6421 6421 stored
ADOS.CFG 61 36 deflated
ADOS.CO_ 17911 17853 deflated
ADOS.OV_ 45289 45199 deflated
ADOS.TX_ 40535 40461 deflated
AM.EXE 7825 5014 deflated
AREADME.TX_ 12280 12280 stored
ASSIGN.CO_ 4547 4547 stored
BACKUP.EX_ 22966 22966 stored
CGA.GR_ 1617 1617 stored
CGA.IN_ 2775 2771 deflated
CGA.VI_ 6131 6131 stored
CHOICE.COM 1754 1027 deflated
COMMANDS.TX_ 25400 25344 deflated
COMP.EX_ 8738 8738 stored
CV.COM 716 343 deflated
DOSSHELL.CO_ 1907 1777 deflated
DOSSHELL.EX_ 142511 142351 deflated
DOSSHELL.HL_ 48773 48612 deflated
DOSSWAP.EX_ 13498 13493 deflated
DRVBOOT.BA_ 1277 1277 stored
DVORAK.SY_ 1779 1779 stored
DVORAK.TX_ 3215 3215 stored
EDLIN.EX_ 9222 9222 stored
EGA.GR_ 2466 2466 stored
EGA.IN_ 2776 2770 deflated
EGA.SY_ 3684 3684 stored
EGA.VI_ 6160 6160 stored
EGAMONO.GR_ 2318 2318 stored
EXE2BIN.EX_ 5983 5983 stored
EXPAND.EXE 16129 15617 deflated
FAKEMOUS.COM 307 287 deflated
GET_FUNC.COM 24 23 deflated
GORILLA.BA_ 10439 10439 stored
GRAFTABL.CO_ 6078 6031 deflated
HERC.GR_ 1636 1636 stored
HERC.VI_ 6271 6271 stored
ISO.CP_ 15240 13678 deflated
ISO.TXT 2761 1062 deflated
JOIN.EX_ 12237 12237 stored
KBDBUF.SYS 1140 850 deflated
LCD.CP_ 2793 2517 deflated
MIRROR.CO_ 11424 11424 stored
MONEY.BA_ 13049 13049 stored
MONO.GR_ 296 296 stored
MONO.IN_ 2451 2451 stored
MSHERC.CO_ 4086 4086 stored
NET.1X_ 4704 4566 deflated
NET.TX_ 2656 2480 deflated
NETBEUI.DO_ 21122 21108 deflated
NETWKSTA.1X_ 38186 37548 deflated
NETWKSTA.2X_ 60768 59843 deflated
NIBBLES.BA_ 7182 7182 stored
PRINTER.SY_ 10961 10961 stored
PRINTFIX.COM 234 206 deflated
REDIR.1X_ 19627 19567 deflated
REDIR.2X_ 20033 19982 deflated
REMLINE.BA_ 4435 4435 stored
SD6COPY.BAT 758 404 deflated
SETNAME.EX_ 3131 3131 stored
SETUP.BAT 13208 3154 deflated
TPCREAD.ME 199 165 deflated
VGA.GR_ 3198 3198 stored
VGA.VI_ 6355 6355 stored
VGAMONO.GR_ 3214 3214 stored

Download File SUP622.ZIP Here

Contents of the ISO.TXT file


ISO.TXT
=======
This file provides information about the ISO.CPI file.

The ISO.CPI file contains ISO-compliant versions of certain character
sets (codepages).

ISO-compliant fonts are special monospace (nonproportional) display fonts
that, on some displays, are more readable than standard display fonts.
(ISO fonts work only in 25-line mode; they do not support 43- or 50-line
mode.) The ISO fonts included with MS-DOS 6.22 comply with Part 3 of
the ISO 9241 Specification.

The ISO.CPI file contains ISO-compliant versions of the following character
sets (codepages):

437 United States
737 Greek II
850 Multilingual (Latin I)
852 Slavic/Eastern European (Latin II)
855 Cyrillic I
857 Turkish
860 Portuguese
861 Icelandic
863 Canadian-French
865 Nordic
866 Russian (Cyrillic II)
869 Greek I

To install ISO fonts, you add or edit commands in your AUTOEXEC.BAT and
CONFIG.SYS files. If your system is already set up to load a character
set (code page) other than the standard United States character set,
carry out Procedure 1. Otherwise, carry out Procedure 2.

Procedure 1 -- If your system is already set up to load a character set
other than the standard United States character set:

1. In your AUTOEXEC.BAT file, change the MODE CON CODEPAGE PREPARE
command so that it specifies ISO.CPI instead of your usual
codepage (.CPI) file.

For example, suppose your current MODE command loads the Portugese
character set (860) and looks like the following:

MODE CON CODEPAGE PREPARE=((860) C:\DOS\EGA.CPI)

To use the ISO-compliant version of the Portugese character set, you
would change this command to specify ISO.CPI, as follows:

MODE CON CODEPAGE PREPARE=((860) C:\DOS\ISO.CPI)

Procedure 2 -- If you are using the standard US character set:

1. Add a DEVICE command for DISPLAY.SYS to your CONFIG.SYS file. For
example, if you want to use the United States hardware character
set (437), and if DISPLAY.SYS is in the C:\DOS directory, you would
add the following command to your CONFIG.SYS file:

DEVICE=C:\DOS\DISPLAY.SYS CON=(EGA,437,2)

Note that DISPLAY.SYS uses about 12K of memory.

2. Add MODE commands to your AUTOEXEC.BAT file to load and select the
proper character sets (code pages). For example, to use the ISO
version of the United States character set (437), you would add
the following commands to your AUTOEXEC.BAT files:

MODE CON CODEPAGE PREPARE=((437) C:\DOS\ISO.CPI)
MODE CON CODEPAGE SELECT=437



 December 28, 2017  Add comments

Leave a Reply