Dec 182017
 
Make null modem cable out of telephone cable.
File RJ11R232.ZIP from The Programmer’s Corner in
Category Tutorials + Patches
Make null modem cable out of telephone cable.
File Name File Size Zip Size Zip Type
RJ11R232.DOC 4146 1138 deflated

Download File RJ11R232.ZIP Here

Contents of the RJ11R232.DOC file


How to Make an Outrageously Long Null Modem Cable With Phone Cable
____________________________________________________________________________
by Keith Barney
Barneysville BBS
(703) 528-0124
V-Series 9600
_____________________________________________________________________________


Recently I was trying to connect serially to another computer,
and needed a way to go over 100 feet, and also not have a cable as thick
as a tree trunk. One of my co-workers had a sketch of how to accomplish
what I needed to do with regular phone line and some connectors which I
easily obtained for $5.00 each at my local electronics store. The sketch
my co-worker had was written in the back of a book, and what I am trying to
do is to preserve the plan so that others may benefit from it, and I will be
able to find it again.

This is how to make an outrageously long null modem cable:

You will need the following materials...
o 2 rj11 to 25pin female or 2 rj11 to 9pin female or one
rj11 to 25pin female and one rj11 to 9pin female
serial kits. (Whatever fits the back of your serial
port) serial kits.
o A long 4 wire phone cable.
(As long as your installation needs)

o 2 rj11 ends for 4 or 6 wire cable
(the 6 wire ends will work on 4 wire cable, but
you just have to be carefull when you center it
before crimping it).

o A rj11 end stripping and crimping tool.
(Most expensive thing, like $20.00).


Steps to build cable:

1. Make rj11 cable. (Colors opposite at each end)
(One end is Black, Red, Green, Yellow, and other is
Yellow, Green, Black and Red).

2. Wire 1st kit from template 1. (25 pin or 9 pin)

3. Wire 2nd kit from template 2. (25 pin or 9 pin)

4. Snap the connectors to the rj11 cable and plug the ends in.


** Massively important note, be sure to build one kit from one of the
** Template ones and one kit from one of the Template twos.
** Otherwise it won't work!!

Template 1 for 25 pin Connectors:

(25 Pin) Kit One:
Color Pin
________________________________________________________
Black 7
Red 2
Green 3
Yellow 8

Jumper 4 and 5 together

Jumper 6 and 8 and 20 together




Template 1 for 9 pin Connectors:

(9 Pin) Kit One:
Color Pin
________________________________________________________
Black 5
Red 2
Green 3
Yellow 1

Jumper 6 and 4 and 1 together

Jumper 7 and 8 together


Template 2 for 25 pin Connectors:

(25) Pin Kit Two:
Color Pin
________________________________________________________
Black 8
Red 2
Green 3
Yellow 7

Jumper 4 and 5 together

Jumper 6 and 20 together


Template 2 for 9 pin Connectors:

(9) Pin Kit Two:
Color Pin
________________________________________________________
Black 1
Red 2
Green 3
Yellow 5

Jumper 6 and 4 together

Jumper 7 and 8 together

_____________________________________________________________________________








 December 18, 2017  Add comments

Leave a Reply