MEDshare
4100 West 15th, #103
Plano, Texas 75093
(214)736-3668

DENTAL#1
Version 1.03

Dental Office Management System
Unregistered version ($10.00 - 100 patient limit)
Registered version ($395.00 - no limits)
Other products soon to be available.

VAR's & CONSULTANTS: If you find DENTAL#1 to be a product, of
quality, that you would like to offer your clients please contact
Paul E. Tucker, MEDshare, 4100 West 15th, Suite 103, Plano, Texas
75093. We are interested in building our registered distributor
base and would like to hear from you.

DENTAL#1 System requirements:
MS-DOS 2.0 (or greater)
640k of memory (* required)
Monochrome (or color) monitor
(1) 5 1/4" floppy disk drive (for loading of software)
(1) hard disk drive (for program and data files)
(1) printer (any dot matrix printer)

NO SPECIAL FORMS ARE REQUIRED. ALL REPORTS WILL BE
PRINTED ON 8 1/2" X 11" STANDARD STOCK PAPER.

(Note - DENTAL#1 is a single user system and is not qualified for
multi-user, or network, usage.)

Files contained on your distribution disks:
README.1ST = Basic instructions.
DENTAL1.EXE = Program (part 1 of 4).
DEN1001.OVL = Program (part 2 of 4).
DEN1002.OVL = Program (part 3 of 4).
DEN1003.OVL = Program (part 4 of 4).
MANUAL.PT1 = Part 1 of 4 part user manual.
MANUAL.PT2 = Part 2 of 4 part user manual.
MANUAL.PT3 = Part 3 of 4 part user manual.
MANUAL.PT4 = Part 4 of 4 part user manual.
MANUAL.BAT = Routine to print your user manual.
DENTABLE.DBF = Predefined charge code table.

Steps to follow for system installation:
1. Make a backup of the DENTAL#1 distribution disks and store
the originals in a save place. Use the newly created
backup disks for all following installation instructions.

2. Check to insure that you have a 'CONFIG.SYS' file in your
root directory with the following MINIMUM values:
FILES = 20 BUFFERS = 8
If you do not have a 'CONFIG.SYS' file, or it does not
contain these minimum values, consult your DOS manual on
how to create/modify your 'CONFIG.SYS' file.
(Note - DENTAL#1 will not operate properly, and may crash,
if your 'CONFIG.SYS' file does not exist with these values.
If you needed to create, or modify, your 'CONFIG.SYS' file
be sure that you reboot your system before you continue.
Your system only reads the values contained in your
'CONFIG.SYS' file at initial system boot.)

3. From your root directory create a sub-directory that will
contain your DENTAL#1 program and data files. The following
DOS command will create a sub-directory called "DENTAL1".
C>MD\DENTAL1
4. Once you have created the sub-directory, select the new
sub-directory by entering:
C>CD\DENTAL1
5. Insert DENTAL#1 distribution disk #1 into drive A. Copy the
contents of drive A into the newly created DENTAL1 sub-
directory by entering the following DOS command:
C>COPY A:*.*
Remove disk from drive A upon completion.
6. Insert DENTAL#1 distribution disk #2 into drive A. Copy the
contents of drive A into the newly created DENTAL1 sub-
directory by entering the following DOS command:
C>COPY A:*.*
Remove disk from drive A upon completion.
Repeat process with dist #3.
7. Print your user manual and read before going any further:
a: turn on your printer
b: enter C>MANUAL


ALL COPIES OF DENTAL#1 WILL INITIALLY LOAD AS 'UNREGISTERED' HAVING A
100 PATIENT LIMIT. THIS PATIENT LIMIT WILL BE REMOVED UPON THE ENTRY
OF A VALID 'USER REGISTRATION NUMBER' INTO YOUR PRACTICE DATA. THIS
'USER REGISTRATION NUMBER' IS UNIQUE TO EACH USER AND IS PROVIDED TO
THE USER UPON RECEIPT OF A FULLY PAID AND PROPERLY FILLED OUT
REGISTRATION FORM. WHEN YOU SEND IN THIS FORM CHECK TO INSURE THAT
YOUR PRACTICE NAME IS ENTERED EXACTLY AS YOU WISH IT TO BE - ANY
CHANGES IN ENTERING YOUR PRACTICE NAME WILL INVALIDATE YOUR UNIQUE
REGISTRATION NUMBER.

REGISTERED USERS WILL RECEIVE THE FOLLOWING BENEFITS:
>FREE BUG REPLACEMENT DISKS;
>PRINTED USER MANUAL;
>CURRENT VERSION OF DENTAL1:
>LOW COST PRODUCT UPGRADES;
>SPECIAL PRICES ON NEW PRODUCTS FROM MEDshare.


REGISTERING YOUR COPY OF DENTAL#1:
After you've worked with the un-registered package
of DENTAL#1, and decide you want full access to the system,
follow these simple steps to register:
1. Enter the (A)pplication support section of the
UTILITIES sub-menu, select '(U)pdate practice data' and
verify that the information displayed is correct and
entered exactly as you want it to be displayed in all
usages.
2. Enter the (S)ystem support section of the
UTILITIES sub-menu, select '(P)rint registration form,
and print out a copy of the REGISTRATION FORM.

3. Finally, mail the form and a check to cover the
registration fee to MEDshare.

A. A REGISTRATION NUMBER that will unlock you from
the 100 patient limits of the system.
B. A phone number you can call for support (you will
be billed for this support).
C. A printed copy of the user's manual.
D. A copy of the newest version of DENTAL#1.
E. Newsletter informing you of other programs that
complement DENTAL#1.

(Sorry but we can only support our registered users.)