Dec 282017
Expanded CD command, helps move about directories. | |||
---|---|---|---|
File Name | File Size | Zip Size | Zip Type |
GO.DOC | 5526 | 1826 | deflated |
GO.EXE | 35936 | 34435 | deflated |
Download File GOVER220.ZIP Here
Contents of the GO.DOC file
***** ***** *
** ** ** ** ***
** ** ** ***
** **** ** ** *
** ** ** **
***** ***** *
GO ver 2.20 By Kenneth E. Sandquist Jr.
Vision Software March 16, 1992
------------------------------------------
Go was written for obvious reasons! I have a 130 meg harddrive and
trying to keep up with where all my directories have gone to is tedious to
say the least! So along came GO. GO will allow you to locate the occurrence
of any directory on your drive(s) and, if you specify, drop you into that
directory.
It's that simple.
Usage: GO [parameter]{d:}DirName
Where parameter:
no parameter = find the first occurrence of DirName and change
to that directory.
-ad= find ALL occurrences of DirName on default
drive ONLY and ask which directory to change to.
-af= find ALL occurrences of DirName on ALL drives
and ask which directory to change to (including
floppies).
-df= find All occurrences of DirName on default drive
and floppies ONLY.
-a = find ALL occurrences of DirName on ALL drives
and ask which directory to change to.
-d = search default drive ONLY for first occurrence
of DirName and change to that directory.
-f = search ALL drives for first occurrence of
DirName and change to that directory.
(including floppies)
d: = drive on which to search for DirName.
HINT:
To achieve maximum performance from this program, it is a good idea to
optimize your hard drive(s) with a program like Norton's Speed Disk or
Spinrite!
Example:
GO -a TEMP
Will search all directory levels (branches) on ALL drives (EXCLUDING
floppies) for every occurrence of the directory 'TEMP' and prompt you for the
directory you want to change to.
Likewise:
GO -a TE*
Will search all directory levels on ALL drives (EXCLUDING floppies) for
every occurrence of directories beginning with the letters 'TE' and prompt
you for the directory you want to change to.
GO will also give you a "Second Chance"(TM) to search for the NEXT occurrence
of DirName. Example:
If you tell GO to find the first occurrence of the TEMP directory:
GO TEMP
and you find that it is not the particular TEMP directory you wanted,
you can type the same command line - GO TEMP - and GO will search for
the NEXT directory matching TEMP.
NOTE:
The "Second Chance"(TM) is limited to just that - a second time. Typing the
same command line more than twice will just loop you through the first two
matches!
That's it!
If you make a mistake, you can interrupt the search by hitting - C
during the search. The program will drop back to where you started.
-----------------------------------------------------------------------------
VERSION INFORMATION
New with version 1.1: The asterisk wildcard is now supported!
New with version 2.0: Multi-drive support!
Floppy drive support!
"Second Chance"(TM) logic!
New with version 2.1: Fast!
Minor and major bug fixes!
Network compatible!
New with version 2.11: Faster still!
Changed the main subprogram to assembly language!
Eliminated unnecessary code which reduced the size!
Now capable of type-ahead-buffering while searching!
New with version 2.20: Even faster!
Removed directory level parameter!
Re-wrote control-c handler!
A little smaller!
----------------------------------------------------------------------------
DISCLAIMER STUFF
The author of this program has taken every care so that GO will run on
every computer...However...Due to the vast number of computer manufacturers,
no warranty, implied or otherwise, shall be in effect.
-----------------------------------------------------------------------------
REGISTER ???
Although any contribution would be appreciated (hint! hint!), If you
find this program of some use, pass it along to a friend...Right now I'm
looking for recognition not, so much, money. HOWEVER...don't be shy with the
ol' checkbook !!! If you do make a contribution of $10, you will be given
the next release along with any other utilities I come up with between now
and then!
-----------------------------------------------------------------------------
WHO IS VISION SOFTWARE?
Vision Software was founded by the author:
Kenneth E. Sandquist Jr.
3187A Aqueduct Dr.
Lexington, Ky. 40517
-----------------------------------------------------------------------------
** ** ** ** ***
** ** ** ***
** **** ** ** *
** ** ** **
***** ***** *
GO ver 2.20 By Kenneth E. Sandquist Jr.
Vision Software March 16, 1992
------------------------------------------
Go was written for obvious reasons! I have a 130 meg harddrive and
trying to keep up with where all my directories have gone to is tedious to
say the least! So along came GO. GO will allow you to locate the occurrence
of any directory on your drive(s) and, if you specify, drop you into that
directory.
It's that simple.
Usage: GO [parameter]{d:}DirName
Where parameter:
no parameter = find the first occurrence of DirName and change
to that directory.
-ad= find ALL occurrences of DirName on default
drive ONLY and ask which directory to change to.
-af= find ALL occurrences of DirName on ALL drives
and ask which directory to change to (including
floppies).
-df= find All occurrences of DirName on default drive
and floppies ONLY.
-a = find ALL occurrences of DirName on ALL drives
and ask which directory to change to.
-d = search default drive ONLY for first occurrence
of DirName and change to that directory.
-f = search ALL drives for first occurrence of
DirName and change to that directory.
(including floppies)
d: = drive on which to search for DirName.
HINT:
To achieve maximum performance from this program, it is a good idea to
optimize your hard drive(s) with a program like Norton's Speed Disk or
Spinrite!
Example:
GO -a TEMP
Will search all directory levels (branches) on ALL drives (EXCLUDING
floppies) for every occurrence of the directory 'TEMP' and prompt you for the
directory you want to change to.
Likewise:
GO -a TE*
Will search all directory levels on ALL drives (EXCLUDING floppies) for
every occurrence of directories beginning with the letters 'TE' and prompt
you for the directory you want to change to.
GO will also give you a "Second Chance"(TM) to search for the NEXT occurrence
of DirName. Example:
If you tell GO to find the first occurrence of the TEMP directory:
GO TEMP
and you find that it is not the particular TEMP directory you wanted,
you can type the same command line - GO TEMP - and GO will search for
the NEXT directory matching TEMP.
NOTE:
The "Second Chance"(TM) is limited to just that - a second time. Typing the
same command line more than twice will just loop you through the first two
matches!
That's it!
If you make a mistake, you can interrupt the search by hitting
during the search. The program will drop back to where you started.
-----------------------------------------------------------------------------
VERSION INFORMATION
New with version 1.1: The asterisk wildcard is now supported!
New with version 2.0: Multi-drive support!
Floppy drive support!
"Second Chance"(TM) logic!
New with version 2.1: Fast!
Minor and major bug fixes!
Network compatible!
New with version 2.11: Faster still!
Changed the main subprogram to assembly language!
Eliminated unnecessary code which reduced the size!
Now capable of type-ahead-buffering while searching!
New with version 2.20: Even faster!
Removed directory level parameter!
Re-wrote control-c handler!
A little smaller!
----------------------------------------------------------------------------
DISCLAIMER STUFF
The author of this program has taken every care so that GO will run on
every computer...However...Due to the vast number of computer manufacturers,
no warranty, implied or otherwise, shall be in effect.
-----------------------------------------------------------------------------
REGISTER ???
Although any contribution would be appreciated (hint! hint!), If you
find this program of some use, pass it along to a friend...Right now I'm
looking for recognition not, so much, money. HOWEVER...don't be shy with the
ol' checkbook !!! If you do make a contribution of $10, you will be given
the next release along with any other utilities I come up with between now
and then!
-----------------------------------------------------------------------------
WHO IS VISION SOFTWARE?
Vision Software was founded by the author:
Kenneth E. Sandquist Jr.
3187A Aqueduct Dr.
Lexington, Ky. 40517
-----------------------------------------------------------------------------
December 28, 2017
Add comments