Dec 292017
 
Os/2 drivers for Boca Voyager card.
File VOYOS2.ZIP from The Programmer’s Corner in
Category OS/2 Files
Os/2 drivers for Boca Voyager card.
File Name File Size Zip Size Zip Type
BVHSVGA.DLL 26336 15226 deflated
BVHVGA.DLL 40924 20579 deflated
COPYING 17 17 stored
CT480.DSP 3391 883 deflated
CT480B.DSP 258 144 deflated
CT600.DSP 3393 890 deflated
CT600B.DSP 261 145 deflated
CT64300.DSC 936 405 deflated
CT768.DSP 3400 902 deflated
CT768B.DSP 260 145 deflated
DSPRES.DL_ 107793 105291 deflated
IBMVGA32.DL_ 33182 31727 deflated
INSTALL.CMD 1355 452 deflated
README 2060 751 deflated
SCREEN01.SYS 6398 3904 deflated
SV480256.DL_ 73299 70499 deflated
SV600256.DL_ 73419 70587 deflated
SV768256.DL_ 74068 71217 deflated
SVGA.EXE 74311 28616 deflated
SVGAINST.DLL 32709 17877 deflated
VSVGA.SYS 78348 42466 deflated
WINVGA 142972 134473 deflated
WINXGA 108416 108041 deflated

Download File VOYOS2.ZIP Here

Contents of the README file



====
OS/2
====
These drivers are designed to function with the OS/2 2.1 operating system.


DRIVER INSTALLATION
****************************************************************************
NOTE: ALWAYS USE THE "INSTALL.CMD" FOR THE FIRST INSTALLATION OF THE VIDEO
DEVICE DRIVERS. TO CHANGE VIDEO RESOLUTIONS, USE THE "DSPINSTL"
PROGRAM.
****************************************************************************

To install the drivers, follow these instructions:

Step 1: Install OS/2 as you normally would for a VGA display. Open an OS/2
full-screen or window session.

Step 2: Place the Display Driver Diskette #3 in drive A. Type A: to
make this the default drive. Then type INSTALL A: C: .
Once the drivers are installed, the "DSPINSTL" program is auto-
matically invoked. Follow the instructions of the program to set up
the OS/2 drivers in your system. Once the installation is complete,
the system must be shut down and restarted for changes to take effect.


DRIVER DISKETTE COPY
***************************************************************************
NOTE: DISKETTE COPIES OF THE OS/2 DRIVERS MUST HAVE A "VOLUME LABEL" THAT
READS "DISP 1" IN ORDER TO BE AN INSTALLABLE DISKETTE.
***************************************************************************

To copy the OS/2 Display Driver Diskette #3, follow these instructions.

Step1: Copy all files on the Display Driver Diskette #3 as you normally
would onto another diskette.

Step 2: Place the diskette copy in drive A. At the C:\ prompt, type
LABEL A: DISP 1 to properly label your diskette. Then store your
diskette copy in a safe place.

====================================================================
For proper installation of OS/2 drivers, all diskette copies must be
properly labeled "DISP 1".
====================================================================


 December 29, 2017  Add comments

Leave a Reply