Category : OS/2 Files
Archive   : SEDTOS2.ZIP
Filename : ATHLP.EDT

 
Output of file : ATHLP.EDT contained in archive : SEDTOS2.ZIP

Sedt Version 3.3
Help Menu

At any point type Backspace ( H) to go
up one level, Return to continue and go up one level at
the end, or a digit to make a menu selection.

0 Keypad Diagram
1 Keyboard Commands
2 Internal Commands

0
ÚÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄ¿ ÚÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄ¿
³ ³ ³ ³ ³ ³ Find ³ Delete³
³ ³ ³ Sedt Version 3.3 ³ Gold ³ Help ³ Next ³ Line ³
³ ³ ³ IBM PC/AT ³ ³ ³ FIND ³UND. L.³
ÃÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄ´ Unshifted Keyboard ÃÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄ´
³ ³ App Sr³ ³ Page ³ Paragr³ Subst.³ Delete³
³ ³ LOAD ³ ³ SEDT ³ FILL ³ Next ³ Word ³
³ ³ PASTE ³ ³COMMAND³ PARAGR³ SUBST.³UND. W.³
ÃÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄ´ ÃÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄ´
³ ³ Save ³ ³Forward³Reverse³ Cut ³ Delete³
³ ³ File ³ ³ ³ ³ ³ Char ³
³ ³ ³ ³ BOTTOM³ TOP ³ PASTE ³UND. C.³
ÃÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄ´ ÃÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄ´
³ Save ³ ³ ³ Word ³ End ³ Char ³ ³
³ File &³ Quit ³ ³ CHNGE ³ Line ³ SPEC ³ Enter ³
³Context³ ³ ³ CASE ³DEL EL.³ INSRT ³ ³
ÃÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄ´ ÃÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄ´ ³
³ ³ Save ³ ³ Line ³ Select³ ³
³ Dead ³ File &³ ³ ³ ³ SWAP ³
³ ³ Exit ³ ³ OPEN LINE ³ CANCEL³ ³
ÀÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÙ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÙ

ÚÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄ¿ ÚÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄ¿
³ Insert³ Beginn³ ³ ³ ³ Find ³ Delete³
³ Escape³ Line ³ Sedt Version 3.3 ³ Gold ³ Help ³ Next ³ Line ³
³ (ESC) ³ ³ IBM PC/AT ³ ³ ³ FIND ³UND. L.³
ÃÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄ´ Shifted Keyboard ÃÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄ´
³ Delete³ Spawn³ ³ Find ³ Up ³ Up one³ Delete³
³ Beginn³ Text ³ ³ Next ³ 1 Line³ Screen³ Word ³
³ Word ³ Proces³ ³ FIND ³CRS TOP³ TOP ³UND. W.³
ÃÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄ´ ÃÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄ´
³ ³O/S Com³ ³ Left ³ ³ Right ³ Delete³
³ HELP ³ SEDT ³ ³ SCROLL³ ³ SCROLL³ Char ³
³ ³COMMAND³ ³ UP ³ ³ DOWN ³UND. C.³
ÃÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄ´ ÃÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄ´
³ Buffer³ Buffer³ ³ Select³ Down ³ Dn one³ ³
³ 0 ³ 1 ³ ³ ³ 1 Line³ Screen³ Enter ³
³ LEARN ³LEARN K³ ³ CANCEL³CRS BOT³ BOTTOM³ ³
ÃÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄ´ ÃÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄ´ ³
³ Buffer³ Buffer³ ³ ³ Remove³ ³
³ 2 ³ 3 ³ ³ Paste ³ GET ³ SWAP ³
³ ³ ³ ³ ³SEL RNG³ ³
ÀÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÙ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÙ
1

Keyboard Commands

0 Cursor Movement
1 Deletion
2 Insertion
3 Selecting Text Ranges
4 Text Formatting
5 Session Control
6 Key Definition
7 Miscellaneous
8 Ruler Definition Commands

10

C U R S O R M O V E M E N T

H: Goto start of line
+: Set temporary direction to forward
-: Set temporary direction to reverse
.: Goto mark
<: Set temporary direction to reverse
>: Set temporary direction to forward
B: Goto end of buffer
M: Set mark
T: Goto start of buffer
: Goto beginning of line
: Goto next occurrence of search string
: Go one screen up
: Go one screen down
: Go 1 line up vertically
: Go 1 character back
: Go 1 line down vertically
: Go 1 character forward
: Goto next line beginning
: Goto next word
: Goto next end of line
: Goto next character
: Set default direction forward
: Set default direction reverse
: Goto next page
: Goto next paragraph
: Goto next occurrence of search string
: Goto matching bracketing character:'"<>[]{}()
: Goto next occurence of string
: Go to top of buffer
: Go to bottom of buffer
: Position cursor at top of window
: Go backwards until key struck
: Position cursor at bottom of window
: Go forward until key struck
: Goto end of buffer
: Goto beginning of buffer
: Goto next occurrence of string
11

D E L E T I O N

J/: Delete to beginning of word
U: Delete to beginning of line
Z: Clear buffer
: Delete to beginning of word
: Cut
: Cut
: Delete character forward
: Delete word forward
: Delete line forward
: Delete to end of line
12

I N S E R T I O N

I/<->|>: Insert a tab character
M/: Insert a carriage return
G: Include file at current position
P: Insert a form feed character
: Insert an escape character
: Paste
: Open line
: Insert ASCII character
: Undelete paste string
: Undelete character
: Undelete word
: Undelete Line
13

S E L E C T I N G T E X T R A N G E S

: Set select point at current position
: Set select point at current position
: Cancel select point
: Cancel select point
14

T E X T F O R M A T T I N G

A: Set indentation level
D: Decrease indentation level
E: Increase indentation level
T: Adjust select range by a tab stop
C: Center line
I: Toggle tab expansion/insertion
L: Toggle block/line cut and paste
O: Toggle overstrike mode
J: Refill paragraph from beginning of line
R: Enter ruler definition mode
_: Insert a hyphen and reindent paragraph
: Process file with TXTF
: Fill or justify to end of paragraph
15

S E S S I O N C O N T R O L

W: Refresh display
D: Toggle between one and two window mode
E: Edit new file in current buffer
F: Save current buffer and exit
Q: Exit without saving current buffer
S: Save contents of buffer
W: Toggle between 132 and 80 character screen
: Save contents of buffer
: Quit without saving buffer
: Save buffer and exit
: Select buffer 0
: Select buffer 1
: Select buffer 2
: Select buffer 3
16

K E Y D E F I N I T I O N

K: Define key
I: Save key definition in buffer
L: Load key definition from buffer
: Load keystrokes into ^Z
: Load keystrokes into arbitrary key
17

M I S C E L L A N E O U S

L: Increase font size
P: Print contents of buffer
R: Reduce font size
: Execute operating system command
A: Toggle automatic horizontal screen shifting
H: Help
U: Undo last command if possible
X: Switch to previous window
: Delete select range and append to paste buffer
: Dead key
: Dead key
: Help
: Execute operating system command
: Substitute next occurrence of search string
: Help
: Dead key
: Load paste buffer from file
: Dead key
: Execute Sedt command
: Load paste buffer from select range
: Change case EDT style
: Execute Sedt command
: Substitute one string by another
: Swap characters
18

R U L E R D E F I N I T I O N C O M M A N D S

Move 1 column right
Move 1 column left
- Remove tab stop at current column
<->|> Move right to next tab position
H Move to column 1
T Set a tab position at the current column
L Set left margin
R Set right margin for fill
J Set right margin for justify
W Set left margin for fill and justify
A Set auto left margin mode
I Set Tab indentation level
Remove all format controls at current column
Load saved ruler number Digit

Save ruler in saved ruler number Digit
Return to edit mode
2

Internal Commands

0 Execution
1 Tokens
2 Prompts
3 Conditionals
4 State Control
5 Movement Commands
6 Action Commands
20

Execution

Key definitions terminated by a period are executed immediatly
after the key is pressed.

Key definitions not terminated by a period are saved until a key
with a defition terminated by a period is pressed.
21

Tokens

Tokens are replaced by the value that the token definies
immediatly before command execution. Tokens replacement will not
happen in responses to prompts.

%% Replaced by a single % character
%# The current value of the counter
%F Output file name of the current buffer
%N Filename, excluding extention, of the output file
of the current buffer
%T The file type of the output file of the current
buffer
%D The device and directory of the output file of
the current buffer
%E Value of environment variable SEDT or, on VMS,
the string Sedt$Dir:
%L Current line number
%C Current character position
%P The contents of the paste buffer
22

Prompts

If a key definition contains one of the following characters: ?
or ! the following actions will take place:

?? is replaced by ?

!! is replaced by !

? will prompt with at the
bottom of the screen, read a string from the keyboard and
replace the contruct with the string.

! will prompt with at the
bottom of the screen, wait for a key to be pressed and
replace the construct with a string that uniquely
identifies the key.
23

Conditionals

^C() causes to be executed only if the
current buffer contains unsaved changes.

^C(|) causes to be executed if
the buffer contains unsaved changes and to
executed if the buffer is unchanged.

^E()() causes to be executed.
If any error occurs during the execution the rest of
will be skipped and will be
executed. string is ignored if no error
occurs.

^E()(|) will execute
. If an error occurs the rest of
will be skipped and then will be executed,
otherwise is executed after completion of
.

^S() causes to be executed only if there is
a select region active.

^S(|) causes to be executed if
a select region is active. If no select region is active
will be executed>. 24

State Control

^TD() Saves the direction flag and restores it after
have been executed.

^TI() Saves the replace/insert mode flag and restores
it after have been executed.

^TB() Saves the block/line mode flag and restores it
after have been executed.

^TT() Saves the the tab insert/expand flag and restores
it after have been executed.
25

Movement Commands

{}@AC Absolute Character
{}@AL Absolute Line
@BB Beginning of Buffer
@BM Matching bracketing character:'"<>[]{}()
@EB End of Buffer
@EL End of Line
{+|-|<|>}{}@C Character
{+|-|<|>}{}@F
Find
{+|-|<|>}{}@L Line
{}@M Mark
{+|-|<|>}{}@N Next ocurrence of
{+|-|<|>}{}@PAG Page
{+|-|<|>}{}@PAR Paragraph
{+|-|<|>}{}@SCR Screen
{+|-|<|>}{}@SEN Sentence
@SR Select Range
{+|-|<|>}{}@V Vertical
{+|-|<|>}{}@W Word
@XSR Select Range without clear
26

Action Commands

:A Advance as Default
:B Backward as Default
:CB Cursor at Bottom of Screen
:CC<@ command> Change Case
:CD<@ command> Change to Lower case
:CE Change Case Edt Style
:CH Insert ASCII Character
:CL Center Line
:CM Cursor at Middle of Screen
:CNG Get counter from buffer
:CNI Increment or decrement counter
:CNP Insert value of counter in buffer
:CNS Set counter value
:CS Save buffer context
:CT Cursor at Top of Screen
:CU<@ command> Change to Upper Case
😀<@ command> Delete
:EAP<@ command> Delete and Append to Delete Buffer
:EL Set Error Level for Audible Warning
:ERC Clear edit region
:ERS<@ Command> Set edit region
:FE
Edit File
:FG
Get File
:FNL Use Larger Font
:FNS Use Smaller Font
:FS
Save File
:FW
Write Buffer to File
:FX
Execute File
:GAP<@ command> Get and Append to Delete Buffer
:GE<@ command> Get
:GR Get Ruler from Ruler Definition File
:H Help
:I
Insert Text
:K
Define Key
{}:LD Decrease Indentation
{}:LI Increase Indentation
:LK<@ Command> Load Key Definition from Buffer
{}:LNE Execute Keystrokes Stored in Key
:LNL Store Keystrokes in Key
:LNX End keystroke learning
:LS Set Indentation Level
{}:M Mark cursor position
{}:NL New line
{+|-|<|>}{}:NS Substitute Next
:OE
Output Error Message
{}:OL Open Line
:OM
Output Message
:OS Toggle Overstrike Mode
:OW. Switch to Previous Buffer
:PD Insert Current Date
:PL
Load Paste Buffer from File
:PR
Print Current Buffer
:PS
Save Paste Buffer
:PT Insert Current Time
:Q Quit
:REP Replace
:RF Refresh Display
:RK Redefine key as character
:RL Ruler
:RMCHA Clear character delete buffer
:RMHEL Clear help buffer
:RMLIN Clear line delete buffer
:RMPAG Clear page delete buffer
:RMPAR Clear paragraph delete buffer
:RMPAS Clear paste buffer
:RMSEA Clear search buffer
:RMSEN Clear sentence delete buffer
:RMSUB Clear substitute buffer
:RMUNK Clear unknown delete buffer
:RMWOR Clear word delete buffer
:RS Reset Select Range
:RTAB<@ command> Replace tabs with spaces
:RUL<@ command> Load Ruler from Entity
:RUS Save Ruler in Buffer
:SAVK
Save key definitions in file
:SC Show Current Column
:SEL Select
:SETB Set block/line mode toggle
:SETD Set forward/reverse toggle
:SETR Set replace/insert mode toggle
:SETT Set tab insert/expand toggle
:SK Save Key Definition in Buffer
:SL<@ command> Load Search Buffer
:STAB<@ command> Replace multiple spaces with tabs
:STRP<@ command> Strip trailing spaces from end of lines
{+|-|<|>}{}:SUB
Substitute
:SV Show Version
:SYQ
Spawn without clearing and refreshing screen
:SYR

Spawn and redirect stdout and sterr
:SYS
Spawn to Operating System
{}:TAB Move to Next Tab Stop
{+|-|<|>}{}:TAD<@ command>
Adjust Text by One Tab Stop
:TB Toggle Block Mode
:TC Toggle Control Character Display
:TD Toggle Direction
:TF<@ command> Fill
:TI Test for Input Pending
:TM Toggle Buffer Markers
:TP Toggle Cursor Line
:TR Toggle ruler display
:TS Toggle Automatic Screen Shifts
:TT Toggle Tab Expansion
{}:UC Undelete Character
{}:UL Undelete Line
:UM Undo Last Command
:UOFF Turn off screen updating
:UON Turn on screen updating
{}:UPAG Undelete Page
{}:UPAR Undelete Paragraph
:UPD Update Buffer Header Line
{}:USEN Undelete Sentence
{}:USR Paste
{}:UU Undelete Unknown
{}:UW Undelete Word
:WC Toggle Windows
:WD Toggle Width
:WI Select Buffer
:X Exit
:Z Zap Buffer


  3 Responses to “Category : OS/2 Files
Archive   : SEDTOS2.ZIP
Filename : ATHLP.EDT

  1. Very nice! Thank you for this wonderful archive. I wonder why I found it only now. Long live the BBS file archives!

  2. This is so awesome! 😀 I’d be cool if you could download an entire archive of this at once, though.

  3. But one thing that puzzles me is the “mtswslnkmcjklsdlsbdmMICROSOFT” string. There is an article about it here. It is definitely worth a read: http://www.os2museum.com/wp/mtswslnk/