Category : OS/2 Files
Archive   : LW22.ZIP
Filename : LW.MDM

 
Output of file : LW.MDM contained in archive : LW22.ZIP
Anchor 2400i Internal Half-card` ATZ^MATDT^M^~^~+++^~^~^~ATH0^MCONNECTNO DIALNO CARRIERBUSYVOICEERRORATE1Q0M1X4V1S7=60
AT&C1&D2&W
AST 2X9600 Internal Half-cardKATZ^MATDT^M^~^~+++^~^~^~ATH0^MCONNECTNO DIALTONENO CARRIERBUSYVOICEERROR¡AT&F
AT&C1&D2\J0\N3\Q3\V1&W
DIP SWITCH SETTINGS:

FRONT 1 2 3 4 5 6 7 8 9 10
U D D U D U U D * *

REAR 1 2 3 4 5 6 7 8
D D D U D U U *

*=Not Used
ATI 2400etc (non V.42)lf-card€%ATZ^MATDT^M^~^~+++^~^~^~ATH0^MCONNECTNO DIAL TONENO CARRIERBUSYVOICEERRORAT&F1
AT&C1&D2&W
ATI 2400etc/e & 2400etc/i (with V.42)€%ATZ^MATDT^M^~^~+++^~^~^~ATH0^MCONNECTNO DIAL TONENO CARRIERBUSYVOICEERRORAT&F2
AT&C1&D2&W
ATI 9600etc/e V.32/V.42 (with V.42)–ATZ^MATDT^M^~^~+++^~^~^~ATH0^MCONNECTNO DIAL TONENO CARRIERBUSYVOICEERRORAT&F2
AT&C1&D2&W
BocaModem 14.4Kbps V.32bis FaxModem–ATZ^MATDT^M^~^~+++^~^~^~ATH0^MCONNECTNO DIALTONENO CARRIERBUSYVOICEERROR2AT&F
ATN1W0&Q9&C1&D2&K3%E1S10=30S11=50S95=3
AT&W0
Cardinal 2400 MNPV.32bis FaxModem€%ATZ^MATDT^M^~^~+++^~^~^~ATH0^MCONNECTNO DIAL TONENO CARRIERBUSYVOICEERROR%AT&F
AT&C1&D2&T5\C1\J0\N3\Q3\V1\K3&W
Digicom 9624LE / 9624PC V.32bisem–ATZ^MATDT^M^~^~+++^~^~^~ATH0^MCONNECTNO DIALTONENO CARRIERBUSYVOICEERRORAT&F
AT*F3*E9&W
E*Tech Bullet E9696M V.32 MNPemKATZ^MATDT^M^~^~+++^~^~^~ATH0^MCONNECTNO DIALTONENO CARRIERBUSYVOICEERROR"AT&F
AT&C1&D2&T5$C1$E1$F4$S0$X5&W
E*Tech Bullet PC2400MH MNPPem€%ATZ^MATDT^M^~^~+++^~^~^~ATH0^MCONNECTNO DIALTONENO CARRIERBUSYVOICEERRORAT&F
AT&C1&D2&T5$C1$E2$F4$X1&W
Everex 12e External (EV-936)em°ATE1F1H0M1Q0V1X4&C1&D2^MATDT^M^~^~+++^~^~^~ATH0^MCONNECTNO DIALTONENO CARRIERBUSYNO ANSWERERRORhDIP SWITCH SETTINGS:

1 2 3 4 5 6 7 8 9
On Off Off Off Off On Off Off Off
Everex 24e External (EV-945)em` ATE1F1H0M1Q0V1X4&C1&D2^MATDT^M^~^~+++^~^~^~ATH0^MCONNECTNO DIALTONENO CARRIERBUSYNO ANSWERERRORdDIP SWITCH SETTINGS:

1 2 3 4 5 6 7 8 9
On Off Off Off Off On Off Off Off
Everex Evercom 24+ MNP945)em€%AT\C0\J0\K5\N3\Q0\V1V1E1Q0X4^MATDT^M^~^~+++^~^~^~ATH0^MCONNECTNO DIALTONENO CARRIERBUSYNO ANSWERERROREverex EverFax 24/96945)em€%AT^M\J0\K5\N3\Q0\V1V1E1Q0X4^MATDT^M^~^~+++^~^~^~ATH0^MCONNECTNO DIAL TONENO CARRIERBUSYNO ANSWERERRORAT&F
AT&T5\J0\N3\V1\X1%C1\Q3&W
Fastcomm FDX 2424 (MNP Class-5)em€%ATZ^MJ0\K5\N3\Q0\V1V1E1Q0X4^MATDT^M^~^~+++^~^~^~ATH0^MCONNECTNO DIALTONENO CARRIERBUSYNO ANSWERERROR1zAT&F
ATE1Q0M1X4V1S7=60
AT&B1&C1&D2&G0&H1&I1&M6&W
DIP SWITCH SETTINGS: All switches on the bottom of the modem should be
in the OPEN (off) position.
Fastcomm FDX 2496MNP Class-5)em€%ATZ^MJ0\K5\N3\Q0\V1V1E1Q0X4^MATDT^M^~^~+++^~^~^~ATH0^MCONNECTNO DIALTONENO CARRIERBUSYNO ANSWERERROR1zAT&F
ATE1Q0M1X4V1S7=60
AT&B1&C1&D2&G0&H1&I1&M6&W
DIP SWITCH SETTINGS: All switches on the bottom of the modem should be
in the OPEN (off) position.
Fastcomm FDX 9696 (V.32 & MNP-5)mKATZ^MJ0\K5\N3\Q0\V1V1E1Q0X4^MATDT^M^~^~+++^~^~^~ATH0^MCONNECTNO DIALTONENO CARRIERBUSYNO ANSWERERROR1zAT&F
ATE1Q0M1X4V1S7=60
AT&B1&C1&D2&G0&H1&I1&M6&W
DIP SWITCH SETTINGS: All switches on the bottom of the modem should be
in the OPEN (off) position.
Generic 1200 Baud Hayes clone)m°ATE1Q0M1X4V1^MQ0\V1V1E1Q0X4^MATDT^M^~^~+++^~^~^~ATH0^MCONNECTNO DIALTONENO CARRIERBUSYVOICEWERERRORŸ DIP SWITCH SETTINGS: Refer to your modem manual as to the location
of your switches and the function of each. You
should be sure to set the modem so that it does
NOT force Carrier Detect (this is usually
switch #6). You should also set the modem so
that DTR is NOT forced on (usually switch #1).
Generic 1200 Baud Hayes clone)m°ATZ^MM1X4V1^MQ0\V1V1E1Q0X4^MATDT^M^~^~+++^~^~^~ATH0^MCONNECTNO DIALONENO CARRIERBUSYVOICEWERERRORATE1Q0M1X4V1S7=60
AT&C1&D2&W
Generic 2400 Baud Hayes clone)m` ATE1Q0M1X4V1^MQ0\V1V1E1Q0X4^MATDT^M^~^~+++^~^~^~ATH0^MCONNECTNO DIALTONENO CARRIERBUSYVOICEWERERROR™DIP SWITCH SETTINGS: Refer to your modem manual as to the location
of your switches and the function of each. You
should be sure to set the modem so that it does
NOT force Carrier Detect (this is usually
switch #6). You should also set the modem so
that DTR is NOT forced on (usually switch #1).
Generic 2400 Baud Hayes clone (switchless)` ATZ^MM1X4V1^MQ0\V1V1E1Q0X4^MATDT^M^~^~+++^~^~^~ATH0^MCONNECTNO DIALONENO CARRIERBUSYVOICEWERERRORATE1Q0M1X4V1S7=60
AT&C1&D2&W
Generic V.32 (or other high speed) modemKATZ^MM1X4V1^MQ0\V1V1E1Q0X4^MATDT^M^~^~+++^~^~^~ATH0^MCONNECTNO DIAL TONENO CARRIERBUSYVOICEWERERROR¦ To use this modem setup you must:

- Set the baud to the maximum rate for the modem.
- Make sure that hardware handshaking (CTS and RTS) is enabled at the
modem, either via DIP switch or AT command.
- Make sure that the modem expects a constant computer-to-modem (DTE)
baud rate and that it will negotiate the modem-to-modem (link) rate.

Please, refer to your modem manual for modem specific details.
GVC 9600 V.42r other high speed) modemKATZ^MM1X4V1^MQ0\V1V1E1Q0X4^MATDT^M^~^~+++^~^~^~ATH0^MCONNECTNO DIALTONENO CARRIERBUSYVOICEWERERRORAT&F
AT&C1&D2%C1\J0\N3\Q3\V1&W
Hayes SmartModem 1200 Externald) modem°ATE1Q0M1X4V1S7=60^MV1E1Q0X4^MATDT^M^~^~+++^~^~^~ATH0^MCONNECTNO DIALTONENO CARRIERBUSYVOICEWERERROR±Set the following DIP switches on your modem:

1 2 3 4 5 6 7 8 9 10
U U D U D U U D U U

NOTE: Not all versions of this modem have switches 9 and 10
Hayes SmartModem 1200B Full Card Internal°ATE1Q0M1X4V1S7=60^MV1E1Q0X4^MATDT^M^~^~+++^~^~^~ATH0^MCONNECTNO DIALTONENO CARRIERBUSYVOICEWERERROR6DIP SWITCH SETTINGS:

#2 DOWN - RJ12/RJ13 phone jack
UP - RJ11 or equivelent
#3 UP - Allow true CD
#4 UP - Allow DTR

NOTE: Not all SmartModem 1200B's are alike! Some may not have all
of these switches! Check the manual to make sure that this
setup is correct.
Hayes SmartModem 1200B Half Card Internal°ATE1Q0M1X4V1S7=60^MV1E1Q0X4^MATDT^M^~^~+++^~^~^~ATH0^MCONNECTNO DIALTONENO CARRIERBUSYVOICEWERERRORœDIP SWITCH SETTINGS:

#2 RIGHT - RJ12/RJ13 phone jack
LEFT - RJ11 or equivelent
#3 RIGHT - Allow true CD
#4 LEFT - Allow DTR
Hayes SmartModem 2400Half Card Internal` ATZ^MM1X4V1S7=60^MV1E1Q0X4^MATDT^M^~^~+++^~^~^~ATH0^MCONNECTNO DIALTONENO CARRIERBUSYVOICEWERERRORATE1Q0M1X4V1S11=60
AT&C1&D2&W
Hayes V-Series 2400 (without V.42)ernal` ATZ^MM1X4V1S7=60^MV1E1Q0X4^MATDT^M^~^~+++^~^~^~ATH0^MCONNECTNO DIALTONENO CARRIERBUSYVOICEWERERROR3ATE1Q0M1X4V1S11=60
AT&C1&D2&G0&J0&K3&L0&P0
AT&Q5&W
Hayes V-Series 9600without V.42)ernalKATZ^MM1X4V1S7=60^MV1E1Q0X4^MATDT^M^~^~+++^~^~^~ATH0^MCONNECTNO DIALTONENO CARRIERBUSYVOICEWERERROR3ATE1Q0M1X4V1S11=60
AT&C1&D2&G0&J0&K3&L0&P0
AT&Q5&W
Hayes V-Series 9600 V.42ut V.42)ernalKATZ^MM1X4V1S7=60^MV1E1Q0X4^MATDT^M^~^~+++^~^~^~ATH0^MCONNECTNO DIALTONENO CARRIERBUSYVOICEWERERRORDATE1Q0M1X4V1S11=60
AT&C1&D2&G0&J0&K3&L0&P0
AT&Q5S36=7S46=2S48=7W2&W
Hayes Personal Modem 2400t V.42)ernal` AT&C1&D2E1Q0^M60^MV1E1Q0X4^MATDT^M^~^~+++^~^~^~ATH0^MCONNECTNO DIALONENO CARRIERBUSYVOICEWERERRORHayes V-series ULTRA Smartmodem 9600nal–ATZ^MD2E1Q0^M60^MV1E1Q0X4^MATDT^M^~^~+++^~^~^~ATH0^MCONNECTNO DIALTONENO CARRIERBUSYVOICEWERERRORMAT&F
ATE1N1Q0M1X4V1W2
AT&C1&D2&G0&J0&K3&L0&P0
AT&Q5&U0
ATS7=60S49=8S50=240&W
Intel 2400EX MNPRA Smartmodem 9600nal€%ATZ^MD2E1Q0^M60^MV1E1Q0X4^MATDT^M^~^~+++^~^~^~ATH0^MCONNECTNO DIAL TONENO CARRIERBUSYVOICEWERERRORAT&F
AT&T5\J0\N3\Q3\V1\X1&W
Intel 2400B non-MNP modemsdem 9600nal` ATZ^MD2E1Q0^M60^MV1E1Q0X4^MATDT^M^~^~+++^~^~^~ATH0^MCONNECTNO DIAL TONENO CARRIERBUSYVOICEWERERROR AT&C1&D2&W
Intel 2400B MNP modemsmsdem 9600nalÀATZ^MD2E1Q0^M60^MV1E1Q0X4^MATDT^M^~^~+++^~^~^~ATH0^MCONNECTNO DIAL TONENO CARRIERBUSYVOICEWERERRORAT&F\N3\J0\Q3\V1&W
Intel 2400 v.42bis modemsdem 9600nal€%ATZ^MD2E1Q0^M60^MV1E1Q0X4^MATDT^M^~^~+++^~^~^~ATH0^MCONNECTNO DIAL TONENO CARRIERBUSYVOICEWERERRORAT&F&W
Intel 9600EX V.32 with V.42bis9600nal–ATZ^MD2E1Q0^M60^MV1E1Q0X4^MATDT^M^~^~+++^~^~^~ATH0^MCONNECTNO DIAL TONENO CARRIERBUSYVOICEWERERROR
AT&F
AT&T5&W
Intel High Speed v.42bis modems600nal–ATZ^MD2E1Q0^M60^MV1E1Q0X4^MATDT^M^~^~+++^~^~^~ATH0^MCONNECTNO DIAL TONENO CARRIERBUSYVOICEWERERRORAT&F&W
INFOTEL 144Ied v.42bis modems600naláATN1&C1&D2&Q9W1^MMV1E1Q0X4^MATDT^M^~^~+++^~^~^~ATH0^MCONNECTNO DIALTONENO CARRIERBUSYVOICEWERERRORMicrocom AX/1200,AX/1200c,AX/2400,AX/2400c€%ATZ^M1&D2&Q9W1^MMV1E1Q0X4^MATDT^M^~^~+++^~^~^~ATH0^MCONNECTNO DIAL TONENO CARRIERBUSYVOICEWERERRORy‡ATE1Q0M1X1V1\V1\E0\T0%E1%C1%P2%M0%Z1
AT\G0\N3S0=0\J0\Q3\X0\K5\A3\C2%A13
AT\L0\I0\H0&D2&C1\D0\R1&L0&M0&R0&T5
AT&P0&G0B1&W
DIP SWITCH SETTINGS:

FRONT 1 2 3 4 5 6 7 8 9 10
U D D D D U U D U U


REAR 1 2 3 4 5 6 7 8
D D D U D U D D
Microcom AX/9624c AX/9612c2400,AX/2400cKATZ^M1&D2&Q9W1^MMV1E1Q0X4^MATDT^M^~^~+++^~^~^~ATH0^MCONNECTNO DIAL TONENO CARRIERBUSYVOICEWERERRORyÏATE1Q0M1X1V1\V1\E0\T0%E1%C1%P2%M0%Z1
AT\G0\N3S0=0\J0\Q3\X0\K5\A3\C2%A13
AT\L0\I0\H0&D2&C1\D0\R1&L0&M0&R0&T5
AT&P0&G0B1&W
DIP SWITCH SETTINGS:

FRONT 1 2 3 4 5 6 7 8 9 10
U D D D D U U D U U

REAR 1 2 3 4 5 6 7 8
D D D U D U D D

Data compression can be enabled by issuing the command AT%C1
Microcom QX/4232hsX/9612c2400,AX/2400c–ATZ^M1&D2&Q9W1^MMV1E1Q0X4^MATDT^M^~^~+++^~^~^~ATH0^MCONNECTNO DIALTONENO CARRIERBUSYVOICEWERERROR+üAT&F
ATE1Q0X4\V2\N5\J0\Q3
AT&D2&C1&T5%C3&W
DIP SWITCH SETTINGS:

FRONT 1 2 3 4 5 6 7 8 9 10
U D U U U D D D U

REAR 1 2 3 4 5 6 7 8
D U D U D U U D

T/D in Data Mode
O/A your choice

Data compression is enabled by issuing the AT%C3 command
Microcom QX/V.32cX/9612c2400,AX/2400c–ATZ^M1&D2&Q9W1^MMV1E1Q0X4^MATDT^M^~^~+++^~^~^~ATH0^MCONNECTNO DIALTONENO CARRIERBUSYVOICEWERERROR+ÊAT&F
ATE1Q0X4\V1\N3\J0\Q3
AT&D2&C1&T5%C3&W
DIP SWITCH SETTINGS:

FRONT 1 2 3 4 5 6 7 8 9 10
U D D U D U U D U

REAR 1 2 3 4 5 6 7 8
D U D U D D D D

Data compresion is enabled by issuing the AT%C3 command
Multi-Tech MultiModem 224EC / 224PC W/MNP€%ATZ^M1&D2&Q9W1^MMV1E1Q0X4^MATDT^M^~^~+++^~^~^~ATH0^MCONNECTNO DIALTONENO CARRIERBUSYVOICEWERERROR)mAT&F
AT&E1&E4&15
AT$MB2400$SB9600$BA0&W0
DIP SWITCH SETTINGS:

Switch Bank 1 OPEN
2 * \__ Sets COM Port
3 * /

224EC: Switches on Back of Edgecard
1 OPEN (Up)
2 OPEN (Up)
3 CLOSED (Down)
4 CLOSED (Down)

Data compression is enabled using the AT&E15 command
Multi-Tech MultiModem MT224EH5 (MNP 5)NP€%ATZ^M1&D2&Q9W1^MMV1E1Q0X4^MATDT^M^~^~+++^~^~^~ATH0^MCONNECTNO DIAL TONENO CARRIERBUSYVOICEWERERRORquAT$A0&B0&BS0&C1$D0&D2$F1
AT&G0$MI0&M0$R1&R1&S1
ATB1E1M1Q0V1X4&Q0
AT&E1&E4&E8&E10&E13&E15
AT$MB2400$SB9600$BA0&W0
DIP SWITCH SETTINGS:

4 Switch Bank 1 2 3 4
D U D D
8 Switch Bank 1 2 3 4 5 6 7 8
U U D U D U U D

These jumpers INSIDE the modem also need to be changed:
RTS: toward the back of the modem.
CTS/RTS: toward the back of the modem.

Data compression is enabled using the AT&E15 command
Multi-Tech MultiModem MT224EH7 (MNP 7)NPKATZ^M1&D2&Q9W1^MMV1E1Q0X4^MATDT^M^~^~+++^~^~^~ATH0^MCONNECTNO DIAL TONENO CARRIERBUSYVOICEWERERRORu'AT$A0&B0&BS0&C1$D0&D2$F1
AT&G0#L0$MI0&M0$R1&R1&S1
ATB1E1M1Q0V1X4&Q0
AT&E1&E4&E8&E10&E13&E15
AT$MB2400$SB19200$BA0&W0
DIP SWITCH SETTINGS:

4 Switch Bank 1 2 3 4
D U D D
8 Switch Bank 1 2 3 4 5 6 7 8
U U D U D U U D

This jumper INSIDE the modem also needs to be changed:
CTS/RTS: toward the back of the modem.
Data compression is enabled by the AT&E15 command
Multi-Tech MultiModem 224PC5 (MNP 7)NP` ATZ^M1&D2&Q9W1^MMV1E1Q0X4^MATDT^M^~^~+++^~^~^~ATH0^MCONNECTNO DIALTONENO CARRIERBUSYVOICEWERERRORŠAT&F
DIP SWITCH SETTINGS:

Switch Bank 1 OPEN
2 * \__ Sets COM Port
3 * /
4 CLOSED
Multi-Tech MultiModem 696E (MNP 7)NPKATZ^M1&D2&Q9W1^MMV1E1Q0X4^MATDT^M^~^~+++^~^~^~ATH0^MCONNECTNO DIAL TONENO CARRIERBUSYVOICEWERERRORy$AT$A1&B0&BS0&C1$D0&D2$EP1$F1
AT&G0&M0$MI0&M0$R1&R1&S1
ATB1E1M1Q0V1X4&Q0
AT&E1&E4&E8&E10&E13&E15
AT$MB9600$SB19200$BA0&W0
DIP SWITCH SETTINGS:

4 Switch Bank 1 2 3 4
D U D D
8 Switch Bank 1 2 3 4 5 6 7 8
U U D U D U U D

This jumpers INSIDE the modem also needs to be changed:
CTS/RTS: toward the back of the modem.
Data compression is enabled using the AT&E15 command
Multi-Tech MultiModem 932EC (MNP 7)NPKATZ^M1&D2&Q9W1^MMV1E1Q0X4^MATDT^M^~^~+++^~^~^~ATH0^MCONNECTNO DIALTONENO CARRIERBUSYVOICEWERERROR6AT&F
AT&E1&E4&E8&E10&E13&E15
AT$MB9600$SB19200$BA0&W0
Multi-Tech MultiModem V.32 (MNP 7)NPKATZ^M1&D2&Q9W1^MMV1E1Q0X4^MATDT^M^~^~+++^~^~^~ATH0^MCONNECTNO DIAL TONENO CARRIERBUSYVOICEWERERRORV?AT&F
AT&C1&D2B1E1M1Q0V1X4
AT&E1&E4&E8&E10&E13&E15
AT$MB9600$SB19200$BA0&W0 ($MB14400)
DIP SWITCH SETTINGS:

4 Switch Bank 1 2 3 4
D U D D
8 Switch Bank 1 2 3 4 5 6 7 8
U U D U D U U D

This jumper INSIDE the modem also needs to be changed:
RTS/CTS so that the jumper it on the CTS side.

Data compression is enabled using the AT&E15 command
Multi-Tech MultiModem V32 with V.42bisNP–ATZ^M1&D2&Q9W1^MMV1E1Q0X4^MATDT^M^~^~+++^~^~^~ATH0^MCONNECTNO DIAL TONEBUSYRRIERVOICEOICEWERERRORV=AT&F
AT&C1&D2B1E1M1Q0V1X4
AT&E1&E4&E8&E10&E13&E15
AT$MB9600$SB19200$BA0&W0 ($SB38400)
DIP SWITCH SETTINGS:

4 Switch Bank 1 2 3 4
D U D D
8 Switch Bank 1 2 3 4 5 6 7 8
U U D U D U U D

This jumpers INSIDE the modem also needs to be changed:
RTS/CTS so that the jumper it on the CTS side.

Data compression is enabled using the AT&E15 command
NEC N9631 V.32 MNPm V32 with V.42bisNPKATZ^M1&D2&Q9W1^MMV1E1Q0X4^MATDT^M^~^~+++^~^~^~ATH0^MCONNECTNO DIAL TONENO CARRIERBUSYVOICEWERERRORAT&F2
ATE1Q0&T5\Q3\V1\X1*FT1&W
Practical Peripherals PM2400 V.42bisNP` ATZ^M1&D2&Q9W1^MMV1E1Q0X4^MATDT^M^~^~+++^~^~^~ATH0^MCONNECTNO DIAL TONENO CARRIERBUSYVOICEWERERROR9ATB1E1L2M1Q0V1X4Y1&C1&D2&G0&J0&L0&P0
AT&X0&Y0S0=0S2=43&W
Practical Peripherals PM2400SA MNPisNP€%ATZ^M1&D2&Q9W1^MMV1E1Q0X4^MATDT^M^~^~+++^~^~^~ATH0^MCONNECTNO DIALTONENO CARRIERBUSYVOICEWERERRORUATB1E1L2M1Q0V1X4Y0&C1&D2&J0&P0
AT\A3\C1\E0\G0\J0\K5\N3\Q3\V1\X0
AT%C0%A0S0=0S2=43&W0
Practical Peripherals 9600SA MNPisNP–ATZ^M1&D2&Q9W1^MMV1E1Q0X4^MATDT^M^~^~+++^~^~^~ATH0^MCONNECTNO DIAL TONENO CARRIERBUSYVOICEWERERROR
AT&F&C1&D2&W
Supra V.32bis modem settings.MNPisNP–ATZ^M1&D2&Q9W1^MMV1E1Q0X4^MATDT^M^~^~+++^~^~^~ATH0^MCONNECTBUSYAL TONENOCARRIERNO CARRIERNO DIALTONEERRORAT&F2
ATL0
AT&W
Telebit T2000 & Trailblazer PlusisNPKATZ^M1&D2&Q9W1^MMV1E1Q0X4^MATDT^M^~^~+++^~^~^~ATH0^MCONNECTNO DIALTONENO CARRIERBUSYRRIERVOICELTONEERRORª0AT E1 Q0 M1 V1 W1 X14 Y0 S0=0
AT S50=0 S51=254 S52=4 S54=3 S58=2
AT S63=1 S64=0 S66=1 S67=0 S68=2 S90=0
AT S92=1 S94=1 S95=2 S96=1 S110=1
AT S111=0 S131=1 S255=0 &W1 &W2
BEFORE STARTING: Place your Telebit in ECM (Enhanced Command Mode)
by following these steps:

1. Start with the modem OFF and the A/B switch in the A position
2. Press and hold the T/D while turning the modem ON. Release the
T/D switch after the MR indicator comes on.
Telebit T2500 Trailblazer PlusisNPKATZ^M1&D2&Q9W1^MMV1E1Q0X4^MATDT^M^~^~+++^~^~^~ATH0^MCONNECTNO DIALTONENO CARRIERBUSYRRIERVOICELTONEERROR9íATE1Q0M1X4V1S11=60 X3??
AT&C1&D2&G0&J0&K3&L0&P0
AT&Q5&W
BEFORE STARTING: Place your Telebit in CCM (Conventional Command Mode)
by following these steps:

1. Start with the modem OFF
2. Press and hold the T/D while turning the modem ON. Release the
T/D switch when the PEP, CD, and MR lights flash.
3. Tap the T/D switch until the CD light is lit (but not flashing)
and the PEP and MR lights are OFF.
4. Press and hold the T/D switch until the CD starts flashing
again (about 2 seconds or longer)
Gateway 14,400 bps Fax/Modem v.32/v.42bis–ATZ0^M&D2&Q9W1^MMV1E1Q0X4^MATDT^M^~^~+++^~^~^~ATH0^MCONNECTNO DIALTONENO CARRIERBUSYRRIERVOICELTONEERROR-AT&F
ATT W1 &C1 &D2 &L0 &P0 S7=60 S95=47 &W0
UDS 2440,400 bps Fax/Modem v.32/v.42bis€%ATZ^M&D2&Q9W1^MMV1E1Q0X4^MATDT^M^~^~+++^~^~^~ATH0^MCONNECTNO DIAL TONENO CARRIERBUSYRRIERVOICELTONEERROR)ÉAT&F
ATS7=60
AT&C1&D2&R&T5%N8%U3%V0%K1&W
JUMPER SETTINGS: There are two jumpers INSIDE the modem that should
be checked. These are for CTS and RTS flow control.
These look something like:

o o| o o o
o o| FLO CTS
F R
L T
O S

The pins above "RTS" should be jumpered and the right
two by "CTS" should be covered.
UDS V.3224/V.3225 (V.32)em v.32/v.42bisKATZ^M&D2&Q9W1^MMV1E1Q0X4^MATDT^M^~^~+++^~^~^~ATH0^MCONNECTNO DIAL TONENO CARRIERBUSYRRIERVOICELTONEERROR&AT&F
ATS7=60
AT&C1&D2&R&T5%C1\Q3\V1&W
USRobotics Direct 1200PC Internal.42bis°ATE1Q0M1X1V1S7=60^MV1E1Q0X4^MATDT^M^~^~+++^~^~^~ATH0^MCONNECTNO DIAL TONENO CARRIERBUSYRRIERVOICELTONEERRORŽDIP SWITCH SETTINGS:

1 2 3 4
OFF OFF OFF OFF

JUMPER SETTINGS:

J1 UP
J2 UP
J3 DOWN
J14 UP
USRobotics Password 1200 Internal.42bis°ATE1Q0M1X1V1S7=60^MV1E1Q0X4^MATDT^M^~^~+++^~^~^~ATH0^MCONNECTNO DIAL TONENO CARRIERBUSYRRIERVOICELTONEERROR˜ DIP SWITCH SETTINGS:

1 2 3 4
UP UP UP UP

JUMPER SETTINGS:

J1 UP
J2 UP
J3 RIGHT
J5 DOWN
USRobotics Password 1200 Internal.42bis` ATZ^MM1X1V1S7=60^MV1E1Q0X4^MATDT^M^~^~+++^~^~^~ATH0^MCONNECTNO DIAL TONENO CARRIERBUSYRRIERVOICELTONEERROR/€ATE1Q0M1X6V1S7=60S11=60
AT&B0&H1&R2&I0&M4&N0&W
DIP SWITCH SETTINGS:

1 2 3 4 5 6 7 8 9 10
UP UP DN UP DN UP UP DN DN UP
USRobotics Direct 2400PC / Sportster 2400` ATE1Q0M1X6V1S7=60S11=60^MX4^MATDT^M^~^~+++^~^~^~ATH0^MCONNECTNO DIAL TONENO CARRIERBUSYRRIERVOICELTONEERRORu DIP SWITCH SETTINGS:

1 2 3 4 5 6 7 8 9 10
OFF OFF ON OFF ON OFF OFF ON ON ON
USRobotics HST Dual Standard (V.42)2400–ATZ^MM1X6V1S7=60S11=60^MX4^MATDT^M^~^~+++^~^~^~ATH0^MCONNECTNO DIAL TONENO CARRIERBUSYRRIERVOICELTONEERROR9¯AT&F
ATB1E1Q0M1X7V1S7=60
AT&A3&B1&C1&D2&H1&R2&M4&N0&K3&W
DIP SWITCH SETTINGS:

1-UP 2-UP 3-DOWN 4-UP 5-DOWN
6-UP 7-UP 8-DOWN 9-DOWN 10-UP
WIDE SWITCH-UP
USRobotics HST (144x ROM)d (V.42)2400KATZ^MM1X6V1S7=60S11=60^MX4^MATDT^M^~^~+++^~^~^~ATH0^MCONNECTNO DIAL TONENO CARRIERBUSYRRIERVOICELTONEERROR,³ATE1Q0M1X7V1S7=60
AT&B1&C1&D2&H1&M4&N0&R2&W
DIP SWITCH SETTINGS:

1-UP 2-UP 3-DOWN 4-UP 5-DOWN
6-UP 7-UP 8-DOWN 9-DOWN 10-UP
WIDE SWITCH-UP
USRobotics HST (144x ROM) (V.42))2400–ATZ^MM1X6V1S7=60S11=60^MX4^MATDT^M^~^~+++^~^~^~ATH0^MCONNECTNO DIAL TONENO CARRIERBUSYRRIERVOICELTONEERROR2²ATE1Q0M1X7V1S7=60
AT&A3&K3&B1&C1&D2&H1&M4&N0&R2&W
DIP SWITCH SETTINGS:

1-UP 2-UP 3-DOWN 4-UP 5-DOWN
6-UP 7-UP 8-DOWN 9-DOWN 10-UP
WIDE SWITCH-UP
USRobotics HST (96x ROM)(V.42))2400KATZ^MM1X6V1S7=60S11=60^MX4^MATDT^M^~^~+++^~^~^~ATH0^MCONNECTNO DIAL TONENO CARRIERBUSYRRIERVOICELTONEERROR&³ATE1Q0M1V1X7S7=60
AT&B1&H1&M4&N0&R2&W
DIP SWITCH SETTINGS:

1-UP 2-UP 3-DOWN 4-UP 5-DOWN
6-UP 7-UP 8-DOWN 9-DOWN 10-UP
WIDE SWITCH-UP
USRobotics HST Dual Standard2))2400–ATZ^MM1X6V1S7=60S11=60^MX4^MATDT^M^~^~+++^~^~^~ATH0^MCONNECTNO DIAL TONENO CARRIERBUSYRRIERVOICELTONEERROR9³AT&F
ATB1E1Q0M1X7V1S7=60
AT&A2&B1&C1&D2&H1&R2&M4&N0&K0&W
DIP SWITCH SETTINGS:

1-UP 2-UP 3-DOWN 4-UP 5-DOWN
6-UP 7-UP 8-DOWN 9-DOWN 10-UP
WIDE SWITCH-UP
USRobotics MicroLink 2400d2))2400` ATE1Q0M1X6V1S7=60S11=60^MX4^MATDT^M^~^~+++^~^~^~ATH0^MCONNECTNO DIAL TONENO CARRIERBUSYRRIERVOICELTONEERRORu DIP SWITCH SETTINGS:

1 2 3 4 5 6 7 8 9 10
OFF OFF ON OFF ON OFF OFF ON ON ON
USRobotics Sportster 140002))2400–ATZ^MM1X6V1S7=60S11=60^MX4^MATDT^M^~^~+++^~^~^~ATH0^MCONNECTNO DIAL TONENO CARRIERBUSYRRIERVOICELTONEERRORUSRobotics HST with V.32bis and Dual Standard with V.32bis–ATZ^MM1X6V1S7=60S11=60^MX4^MATDT^M^~^~+++^~^~^~ATH0^MCONNECTNO DIAL TONENO CARRIERBUSYRRIERVOICELTONEERROR7²AT&F
ATE1Q0M1X7V1S7=60
AT&A3&K3&B1&C1&D2&H1&M4&N0&R2&W
DIP SWITCH SETTINGS:

1-UP 2-UP 3-DOWN 4-UP 5-DOWN
6-UP 7-UP 8-DOWN 9-DOWN 10-UP
WIDE SWITCH-UP
USRobotics VARmodem 2400s and Dual Standard with V.32bis` ATE1Q0M1X6V1S7=60S11=60^MX4^MATDT^M^~^~+++^~^~^~ATH0^MCONNECTNO DIAL TONENO CARRIERBUSYRRIERVOICELTONEERRORu DIP SWITCH SETTINGS:

1 2 3 4 5 6 7 8 9 10
OFF OFF ON OFF ON OFF OFF ON ON ON
ZOOM HC2400Rmodem 2400s and Dual Standard with V.32bis` ATZ^MM1X6V1S7=60S11=60^MX4^MATDT^M^~^~+++^~^~^~ATH0^MCONNECTNO DIALTONENO CARRIERBUSYRRIERVOICELTONEERRORAT&F
ATS11=60&C1&D2&W
ZOOM HC2400Smodem 2400s and Dual Standard with V.32bis` ATZ^MM1X6V1S7=60S11=60^MX4^MATDT^M^~^~+++^~^~^~ATH0^MCONNECTNO DIALTONENO CARRIERBUSYRRIERVOICELTONEERRORAT&F
ATS11=60&C1&D2&W
ZOOM MX2400Rmodem 2400s and Dual Standard with V.32bis` ATZ^MM1X6V1S7=60S11=60^MX4^MATDT^M^~^~+++^~^~^~ATH0^MCONNECTNO DIALTONENO CARRIERBUSYRRIERVOICELTONEERRORAT&F
ATS11=60&C1&D2&W
ZOOM MX2400Smodem 2400s and Dual Standard with V.32bis` ATZ^MM1X6V1S7=60S11=60^MX4^MATDT^M^~^~+++^~^~^~ATH0^MCONNECTNO DIALTONENO CARRIERBUSYRRIERVOICELTONEERRORAT&F
ATS11=60&C1&D2&W
ZOOM FaxModem V.32bis (14400 bps modem)ard with V.32bisáAT&FL0&C1&D2&K3S7=60S11=55S36=7S95=44^MATDT^M^~^~+++^~^~^~ATH0^MCONNECTNO DIALONENO CARRIERBUSYRRIERVOICELTONEERROR)AT&F
AT&C1&D2S36=7S38=0S95=44
ATS11=60&W
ZOOM HC2400R V.42bis/240000 bps modem)ard with V.32bis€%ATZ^M&C1&D2&K3S7=60S11=55S36=7S95=44^MATDT^M^~^~+++^~^~^~ATH0^MCONNECTNO DIALONENO CARRIERBUSYRRIERVOICELTONEERROR)AT&F
AT&C1&D2S36=7S38=0S95=44
ATS11=60&W
ZyXEL U-1496.42bis/240000 bps modem)ard with V.32bis–ATZ0^MC1&D2&K3S7=60S11=55S36=7S95=44^MATDT^M^~^~+++^~^~^~ATH0^MCONNECTNO DIAL TONENO CARRIERNO ANSWERERRORLTONEERROR

  3 Responses to “Category : OS/2 Files
Archive   : LW22.ZIP
Filename : LW.MDM

  1. Very nice! Thank you for this wonderful archive. I wonder why I found it only now. Long live the BBS file archives!

  2. This is so awesome! 😀 I’d be cool if you could download an entire archive of this at once, though.

  3. But one thing that puzzles me is the “mtswslnkmcjklsdlsbdmMICROSOFT” string. There is an article about it here. It is definitely worth a read: http://www.os2museum.com/wp/mtswslnk/