File Archive

 
Output of file : PKTDRVR.H contained in archive : PKTD11B.ZIP

#ifndef CL_ETHERNET

/* Packet driver interface classes */
#define CL_NONE 0
#define CL_ETHERNET 1
#define CL_PRONET_10 2
#define CL_IEEE8025 3
#define CL_OMNINET 4
#define CL_APPLETALK 5
#define CL_SERIAL_LINE 6
#define CL_STARLAN 7
#define CL_ARCNET 8
#define CL_AX25 9
#define CL_KISS 10
#define CL_IEEE8023 11
#define CL_FDDI 12
#define CL_INTERNET_X25 13
#define CL_LANSTAR 14
#define CL_SLFP 15
#define CL_NETROM 16
#define NCLASS 17

/* Packet driver interface types (not a complete list) */
#define TC500 1
#define PC2000 10
#define WD8003 14
#define PC8250 15
#define ANYTYPE 0xffff

/* Packet driver function call numbers. From Appendix B. */
#define DRIVER_INFO 1
#define ACCESS_TYPE 2
#define RELEASE_TYPE 3
#define SEND_PKT 4
#define TERMINATE 5
#define GET_ADDRESS 6
#define RESET_INTERFACE 7
#define GET_PARAMETERS 10
#define AS_SEND_PKT 11
#define SET_RCV_MODE 20
#define GET_RCV_MODE 21
#define SET_MULTICAST_LIST 22
#define GET_MULTICAST_LIST 23
#define GET_STATISTICS 24
#define SET_ADDRESS 25

/* Packet driver error return codes. From Appendix C. */

#define NO_ERROR 0
#define BAD_HANDLE 1 /* invalid handle number */
#define NO_CLASS 2 /* no interfaces of specified class found */
#define NO_TYPE 3 /* no interfaces of specified type found */
#define NO_NUMBER 4 /* no interfaces of specified number found */
#define BAD_TYPE 5 /* bad packet type specified */
#define NO_MULTICAST 6 /* this interface does not support multicast */
#define CANT_TERMINATE 7 /* this packet driver cannot terminate */
#define BAD_MODE 8 /* an invalid receiver mode was specified */
#define NO_SPACE 9 /* operation failed because of insufficient space */
#define TYPE_INUSE 10 /* the type had previously been accessed, and not released */
#define BAD_COMMAND 11 /* the command was out of range, or not implemented */
#define CANT_SEND 12 /* the packet couldn't be sent (usually hardware error) */
#define CANT_SET 13 /* hardware address couldn't be changed (> 1 handle open) */
#define BAD_ADDRESS 14 /* hardware address has bad length or format */
#define CANT_RESET 15 /* couldn't reset interface (> 1 handle open) */

#define CARRY_FLAG 0x1

/* In pktdrvr.asm: */
int far test_for_pd (int intno);
int far access_type (int intno,int if_class,int if_type,int if_number,
char far *type,unsigned typelen,int interrupt (*receiver) (void) );
int far driver_type (int intno);
int far release_type (int intno,int handle);
int far get_address (int intno,int handle,char far *buf,int len);
int far get_mtu (int intno);
int far send_pkt (int intno,char far *buffer,unsigned length);
int far set_mode (int intno,int handle,int mode);

#endif /* CL_ETHERNET */