Category : Network Files
Archive   : NOVELFAX.ZIP
Filename : 1012853.TXT

 
Output of file : 1012853.TXT contained in archive : NOVELFAX.ZIP


FYI

(Note: The origin of this information may be internal or external to Novell.
Novell makes every effort within its means to verify this information.
However, the information provided in this document is FOR YOUR INFORMATION
ONLY. Novell makes no explicit or implied claims to the validity of this
information.)

TITLE: NetWare Lite 1.1 Status Reports
DOCUMENT ID#: FYI.P.6072
DATE: 04DEC92
PRODUCT: NetWare Lite
PRODUCT VERSION: v1.1
SUPERSEDES: NA
LITE FAX DOC #: 2853

SYMPTOM

NA

ISSUE/PROBLEM

NetWare Lite 1.1 Status Reports

Network software status reports 1 through 31 are documented in the
NetWare Lite manual on pages 138 through 144. The following are
additional status reports.

Status Report 32: The size of receive buffers specified in the server
configuration is too big for the LAN board being
used. The receive buffer size was changed to the
maximum packet size allowed by the LAN board.

Status Report 33: The size of read buffers specified in the server
configuration is too big for the LAN board being
used. The read buffer size was changed to the
maximum packet size allowed by the LAN board.

Status Report 34: SERVER.EXE cannot initialize network printer because
the number of configured printers is too small.

Status Report 35: SERVER.EXE cannot initialize network printer because
the number of configured printers is too small.

Status Report 36: Selected configuration of SERVER.EXE exceeds 64k of
data memory. Use NET.EXE to reduce configuration
parameters. Reboot machine now, then reconfigure
server with NET.EXE while SERVER.EXE is not loaded.

Status Report 37: CLIENT.EXE was loaded before SERVER.EXE. SERVER.EXE
should be loaded first if a Network Printer is, or
will be, attached to this machine.

Status Report 38: Not enough memory to load.

Status Report 39: The IO buffer size specified in the server
configuration is not a multiple of 16. The IO buffer
size was changed to a multiple of 16.

Status Report 40: The IO buffer size specified in the server
configuration is not a valid multiple of the receive
buffer size. The IO buffer size was changed to two
times the receive buffer size.

Status Report 41: The number of IO buffers specified in the server
configuration is greater than the number of
connections. The number of IO buffers was changed to
the number of connections.

Status Report 42: Byte value greater than 255 in configuration file was
truncated.

Status Report 43: CLIENT.EXE was not unloaded because no previously
loaded CLIENT.EXE could be found in memory.

Status Report 44: CLIENT.EXE was not unloaded because the version of
CLIENT.EXE in memory is not the same as this one.
You must run the same version of CLIENT.EXE to unload
it.

Status Report 45: CLIENT.EXE was not unloaded because another program
was loaded after it. You must unload this other
program first to unload CLIENT.EXE.

Status Report 46: CLIENT.EXE was unloaded from memory.

Status Report 47: Byte value greater than 255 in NET.CFG configuration
file was truncated.

Status Report 48: Bad route address syntax in NET.CFG configuration
file.

Status Report 49: SERVER.EXE was not unloaded because it is not
currently loaded.

Status Report 50: SERVER.EXE was not unloaded because the version of
SERVER.EXE in memory is not the same as this one.
You must run the same version of SERVER.EXE to unload
it.

Status Report 51: SERVER.EXE was not unloaded because another program
was loaded after it. You must unload this other
program first before unloading SERVER.EXE.

Status Report 52: SERVER.EXE was unloaded from memory.

Status Report 53: This copy of SERVER.EXE is for update use only.
SERVER.EXE did not load.

Status Report 54: This copy of CLIENT.EXE is for update use only.
CLIENT.EXE did not load.

Status Report 55: SERVER.EXE was not loaded because an IPX socket could
not be opened. Please configure IPX with more
sockets before loading SERVER.EXE.

Status Report 56: SERVER.EXE was not loaded because NETx.COM has been
loaded. Please load SERVER.EXE before loading
NETx.COM.

SOLUTION

NA


  3 Responses to “Category : Network Files
Archive   : NOVELFAX.ZIP
Filename : 1012853.TXT

  1. Very nice! Thank you for this wonderful archive. I wonder why I found it only now. Long live the BBS file archives!

  2. This is so awesome! 😀 I’d be cool if you could download an entire archive of this at once, though.

  3. But one thing that puzzles me is the “mtswslnkmcjklsdlsbdmMICROSOFT” string. There is an article about it here. It is definitely worth a read: http://www.os2museum.com/wp/mtswslnk/