Category : Network Files
Archive   : NOVELFAX.ZIP
Filename : 1012652.TXT

FYI

(Note: The origin of this information may be internal or external to Novell.
Novell makes every effort within its means to verify this information.
However, the information provided in this document is FOR YOUR INFORMATION
only. Novell makes no explicit or implied claims to the validity of this
information.)

TITLE: Installing a Server
DOCUMENT ID#: FYI.P.6021
DATE: 01OCT92
PRODUCT: NetWare Lite
PRODUCT VERSION: All versions
SUPERSEDES: NA
LITE FAX DOC #: 2652

SYMPTOM

NA

ISSUE/PROBLEM

Installing a Server

The computer you are installing NetWare Lite on must have a hard disk to
be configured as a server. Do not simply copy the files off the original
(or backup) diskettes. To install NetWare Lite and configure the
computer as a server, do the following steps. Depending on your current
setup, the installation program may skip some of the steps.

1. Insert the diskette labeled "program" into the A: (or B:) drive.

2. Type A:INSTALL, and press .

3. Use the arrow keys to highlight "Make this machine a server," and
press .

4. Type in a name for the server, and press .

5. Insert the diskette labeled DRIVER into the A: drive, and press
.

6. Use the arrow keys to highlight the type of network board in your
machine, and press . If you are not sure which board to
choose, refer to the hardware documentation to determine what type
of board you have or which interface it is compatible with.

7. A window showing default settings for your board is displayed. You
may change these if necessary by highlighting the item and pressing
, then highlight the correct value, and press . Refer
to the hardware documentation if you are not sure what the settings
should be. When the settings are correct, press .

8. Answer YES or NO to the "path" message.

9. FILES must be set in the CONFIG.SYS file for the server to run. The
default value shown should work in most situations. If you know
that you need to use a different value, answer NO to the "files"
message and edit CONFIG.SYS appropriately.


10. BUFFERS must be set in the CONFIG.SYS file for the server to run.
The default value shown should work in most situations. If you know
that you need to use a different value, answer NO to the "buffers"
message and edit CONFIG.SYS appropriately.

11. NetWare Lite is now installed. Press to exit the installation
program.

See FYI.P.6004 "SERVER Only Instead of SERVER and CLIENT" for more
information on whether you should also install the client software.

SOLUTION

NA