Jan 022018
 
Soundblaster disk update.

Full Description of File



Sound Blaster BBs Updates
Filename:- SB16W31.EXE

UPD-STD-01 (Revision 3)
Sound Blaster Software Updates disk for
SB 2.0, SBP2 & SB16. Refer to Readme.txt
for details of changes.





File SB16UPD.ZIP from The Programmer’s Corner in
Category Music and Digitized Voice
Soundblaster disk update.
File Name File Size Zip Size Zip Type
DISK.ID 100 73 deflated
FILE_ID.DIZ 336 173 deflated
INSTALL.EXE 172532 140153 deflated
INSTALL.PVL 14968 14494 deflated
LICENSE.TXT 4704 2078 deflated
README.TXT 6862 1555 deflated
SB16UPD.PVL 280121 264573 deflated

Download File SB16UPD.ZIP Here

Contents of the README.TXT file



Sound Blaster BBs Updates
Filename:- SB16W31.EXE

UPD-STD-01 (Revision 3)
Sound Blaster Software Updates disk for
SB 2.0, SBP2 & SB16. Refer to Readme.txt
for details of changes.





Sound Blaster Updates Disk


This file contains the following sections:

1. Installation requirements
2. Installation Instruction
3. INSTALL's operation
4. Updated files


1. INSTALLATION REQUIREMENTS

To install Sound Blaster Updates, you require INSTALL.EXE,
INSTALL.PVL and an additional file that is card dependent.
(Refer to the table below)


Audio card File required

Sound Blaster 16 (Advanced Signal Processor) SB16UPD.PVL
Sound Blaster 16 SB16UPD.PVL
Sound Blaster Pro 2 SBPROUPD.PVL
Sound Blaster Pro SBPROUPD.PVL
Sound Blaster 2.0 SB2UPD.PVL



2. INSTALLATION INSTRUCTION

To update your Sound Blaster software, follow the steps below:

a. Copy all the files required (as shown in section 1) onto a
floppy disk or a directory in your hard disk.

b. Run the program INSTALL.EXE from the floppy disk or your hard
disk.

c. Follow the program's instruction to complete the installation.


3. INSTALL's OPERATION

INSTALL will perform the following tasks:

a. Move all out-dated files that are no longer in use from your Sound
Blaster directory to the BACKUP directory.

b. Back-up all files that will be updated to the BACKUP directory.

c. Install updated programs to your Sound Blaster directory.

d. Verify and update the files WINSETUP.INF and OEMSETUP.INF if
necessary.

If you choose to update the drivers in your Windows directory, the
program will perform the following tasks:

a. Remove all out-dated drivers that are no longer in use from your
Windows directory.

b. Install updated drivers to your Windows directory.

c. Verify that the file SYSTEM.INI contains the correct name of the
Sound Blaster driver.

At the end of the installation, a log file SBUPDATE.LOG will be
created in your Sound Blaster directory. You may use a text editor
to view this file. Alternatively, follow the steps below:

a. Change to your Sound Blaster directory.

b. Type "TYPE SBUPDATE.LOG" and press .


4. UPDATED FILES

Note - BACKUP directory refers to the directory \BACKUP in your
Sound Blaster directory which will be created by INSTALL.


For Sound Blaster 16 (Advanced Signal Processor) users


The following files will be updated:

SBCONFIG.EXE WINSETUP.EXE WFM0006.ACV WFM0007.ACV
WFM0200.ACV CTVDSK.DRV CTWDSK.DRV CSP.SYS
MMPLAY.EXE SBSIM.COM VOICE.EXE VPLAY.EXE
VREC.EXE WPLAY.EXE WREC.EXE SOUNDOLE.EXE
VSBPD.386 CSPMAN.DLL SB16AUX.DRV SB16SND.DRV
SB16FM.DRV WI0006.CSP WI0007.CSP WI0200.CSP
WO0006.CSP WO0007.CSP WO0200.CSP WFM0001A.CSP
WFM0006A.CSP WFM0007A.CSP WFM0200A.CSP

The following files will moved to the BACKUP directory if it exists:

ASP.SYS ASPMAN.DLL ASPMAN.DLL SBP16SND.DRV
WO0200.ASP WI0200.ASP WO0006.ASP WI0006.ASP
WO0007.ASP WI0007.ASP

The following files will be verified and modified if necessary:

WINSEUP.INF OEMSETUP.INF CONFIG.SYS


If you choose to update your Windows drivers:-

The following drivers in the \WINDOWS and \WINDOWS\SYSTEM
directories will be deleted if it exists:

SBP16SND.DRV ASPMAN.DLL

The following drivers in the \WINDOWS and \WINDOWS\SYSTEM
directories will be updated:

CTRES.DLL SB16SND.DRV SB16AUX.DRV CSPMAN.DLL
VSBPD.386 SB16FM.DRV MIDIMAP.CFG WFM0006.ACV
WFM0007.ACV WFM0200.ACV

The following file will be verified and modified if necessary:

SYSTEM.INI


For Sound Blaster 16 users


The following files will be updated:

SBCONFIG.EXE WINSETUP.EXE WFM0006.ACV WFM0007.ACV
WFM0200.ACV CTVDSK.DRV CTWDSK.DRV MMPLAY.EXE
SBSIM.COM VOICE.EXE VPLAY.EXE VREC.EXE
WPLAY.EXE WREC.EXE SOUNDOLE.EXE VSBPD.386
CSPMAN.DLL SB16AUX.DRV SB16SND.DRV SB16FM.DRV

The following files will moved to the BACKUP directory if it exists:

WINSETUP.INF ASPMAN.DLL ASPMAN.DLL SBP16SND.DRV
WVFM0006.ACV WVFM0007.ACV WVFM0200.ACV

The following files will be verified and modified if necessary:

WINSEUP.INF OEMSETUP.INF

If you choose to update your Windows drivers:-

The following drivers in the \WINDOWS and \WINDOWS\SYSTEM
directories will be deleted if it exists:

SBP16SND.DRV ASPMAN.DLL

The following drivers in your Windows and Windows \SYSTEM directory
will be updated:

CTRES.DLL SB16SND.DRV SB16AUX.DRV CSPMAN.DLL
VSBPD.386 SB16FM.DRV MIDIMAP.CFG WFM0006.ACV
WFM0007.ACV WFM0200.ACV

The following file will be verified and modified if necessary:

SYSTEM.INI


For Sound Blaster Pro 2 users


The following files will be updated:

SBPMIXER.EXE SBPSND.DRV SBPAUX.DRV VSBPD.386
SBP2FM.DRV MIDIMAP.CFG

If you choose to update your Windows drivers:-

The following drivers in the \WINDOWS and \WINDOWS\SYSTEM
directories will be updated:

SBPSND.DRV SBPAUX.DRV VSBPD.386 SBP2FM.DRV
MIDIMAP.CFG


For Sound Blaster Pro users


The following files will be updated:

SBPMIXER.EXE SBPSND.DRV SBPAUX.DRV VSBPD.386

If you choose to update your Windows drivers:-

The following drivers in the \WINDOWS and \WINDOWS\SYSTEM
directories will be updated:

sbpsnd.drv sbpaux.drv vsbpd.386



For Sound Blaster 2.0 users


The following file will be updated:

SB20SND.DRV

If you choose to update your Windows drivers:-

The following driver in the \WINDOWS\SYSTEM directory will be
updated:

SB20SND.DRV


******* End of README *******


 January 2, 2018  Add comments

Leave a Reply