Jan 032018
 
MIDIEX is a simple utility to transmit and receive raw System Exclusive data between your computer and your synthesizer.
File MIDIEX18.ZIP from The Programmer’s Corner in
Category Music and Digitized Voice
MIDIEX is a simple utility to transmit and receive raw System Exclusive data between your computer and your synthesizer.
File Name File Size Zip Size Zip Type
MIDIEX.C 12510 3543 deflated
MIDIEX.EXE 17428 10533 deflated
MIDIEX.H 4119 1048 deflated
MIDIINT.ASM 16353 3657 deflated
MIDIINT.OBJ 1435 952 deflated
MIDIX_MC.MAK 306 172 deflated
MIDIX_TC.MAK 651 338 deflated
README 1626 736 deflated

Download File MIDIEX18.ZIP Here

Contents of the README file


MIDIEX version 1.8
Updated by Mike W. Smith, 12/5/89


MIDIEX is a simple utility to transmit and receive raw System Exclusive
data between your computer and your synthesizer. MIDIEX cannot send a
"Request SYSEX" message to your synthesizer, so all received data dumps
must be initiated by the synthesizer. MIDIEX requires that a Roland
MPU-401 or equivalent interface installed in your computer to be able to
send and receive the data. This version of MIDIEX allows you to set the
IRQ level the MPU uses, set the base address of the MPU card, and set the
receive buffer size.



To set the parameters, use:

MIDIEX /B:nnnn /I:n /A:nnn
where,

/B:nnnn is the size of the receive buffer in bytes,
/I:n is the IRQ level of the MPU, and
/A:nnn is the base address for the MPU's I/O ports,
(for hexidecimal numbering, precede the address
with a 0x)

The defaults are /I:2 /A:0x330 /B:1024.



To bring up help, use:

MIDIEX ?

which will display the above message.



PROGRAMMER's NOTE: MIDIEX has been completely rewritten and is now
compatable with Turbo C ver. 2.0. To compile the files, you will need
either Borland's Turbo C ver. 2.0, Microsoft C ver. 5.0 or later, or
Quick C ver 1.0 or later compilers, and Microsoft's MASM ver. 5.1 or
Borland's TASM ver. 1.0 assemblers. Make files have been provided for
both Microsoft MAKE and Borland TMAKE utilities.




 January 3, 2018  Add comments

Leave a Reply