Dec 112017
 
Digital Audio Time 1.0 - A Digital Audio time speaker. Speaks the time on your Sound Blaster, AdLib, Sound Source, or PC Speaker. TAG SOFTWARE - Reg $5.

Full Description of File


Digital Audio Time 1.0 - A Digital Audio time
speaker. Speaks the time on your Sound
Blaster, AdLib, Sound Source, or PC Speaker.
TAG SOFTWARE - Reg $5.



File DATIME10.ZIP from The Programmer’s Corner in
Category Music and Digitized Voice
Digital Audio Time 1.0 – A Digital Audio time speaker. Speaks the time on your Sound Blaster, AdLib, Sound Source, or PC Speaker. TAG SOFTWARE – Reg $5.
File Name File Size Zip Size Zip Type
CATALOG.DOC 46113 16917 deflated
DATALARM.DOC 1376 658 deflated
DATIME.DOC 14877 4989 deflated
DATIME.EXE 121360 86927 deflated
FILE_ID.DIZ 160 128 deflated
README.DOC 5720 1802 deflated
REGISTER.DOC 3669 1104 deflated
TMALARM.BAT 1030 395 deflated

Download File DATIME10.ZIP Here

Contents of the README.DOC file


Digital Audio Time 1.0 - A Digital Audio time
speaker. Speaks the time on your Sound
Blaster, AdLib, Sound Source, or PC Speaker.
TAG SOFTWARE - Reg $5.

Welcome to Digital Audio Time version 1.0 7/1/94

Digital Audio Time 1.0 is a program that speaks the current
time on your Sound Blaster, AdLib Personal Computer
Music System, Disney Sound Source, PC Speaker, or 100%
compatibles.

This README file contains important, last minute information.
If you have a printer, please print and read the documentation
file DATIME.DOC.

This program has been tested on the following:

- a 33MH 486 running DOS 6.0 with a Sound Blaster 16.
- a 25MH 386DX running MSDOS 3.3 with an AdLib.
- a 16MH 386SX running MSDOS 3.3 and PCDOS 2.1 with a
Sound Blaster 1.5 and a Disney Sound Source

We suggest you load this program to your hard disk. It contains
digital sounds and can take awhile to load from floppy disk,
loading this program to your hard disk will improve
performance.

We are extremely interested in your constructive comments
and suggestions. Feedback from users, even negative
feedback, helps us to improve our game products. We thank
you for your interest in TAG SOFTWARE products.

Please send your comments or suggestions to :
..........................
: :
: TAG SOFTWARE :
: 5909 Shepherd Lane :
: Seabrook, MD 20706 :
:........................:

Or we can be reached on The Programmer's Corner BBS
301-596-7692 or 410-995-6873.

INSTALLATION

DATIME should be executable directly from the floppy disk.
We suggest that you make a backup copy, using your favorite
disk duplication program. We strongly suggest that you
install DATIME on your hard disk. Performance is affected by
floppy drive throughput.

EXECUTING DATIME FROM A FLOPPY:

1) Insert the floppy disk containing DATIME into a floppy
disk drive. If this drive is the "B" drive then use "B:"
instead of "A:" in the remaining steps.

2) For systems with a Sound Blaster, AdLib, or PC Speaker, at
the DOS prompt type:

A:
DATIME

For systems with a Disney Sound Source, at the DOS prompt
type:

A:
DATIME -D

3) This command should display:

Digital Audio Time version 1.0
COPYRIGHT (c) 1993 by Allen & Carole Grider
Shareware version - Continued use requires registration
The time is HH:MM [ PM ]

And you should hear the time being spoken.

Remember that you get one FREE disk from our large collection
of digital sound files when you register DATIME. See our
catalog (CATALOG.DOC) for descriptions.

INSTALLATION TO HARD DISK:

If you have received your copy of DATIME 1.0 from a disk
or rack vendor, they may have included an installation
program. If so, then follow the directions supplied therein.
Otherwise, follow these directions.

1) Insert the floppy disk containing DATIME into the
floppy disk drive. If this drive is the "B" drive, use
"B:" instead of "A:" in the remaining steps.

2) You should create a directory on your hard disk. We
suggest DATIME as its name. It can be on any of your
DOS disks. These procedures assume that you will install
DATIME on your C: disk. If you wish to install it on
another of your disks, substitute that disk for C: in the
rest of these steps. Type the following to create the
directory.

C:
CD \
MKDIR DATIME
CD DATIME

3) Copy the contents of the floppy disk into the directory you
just created on your hard disk.

COPY A:*.*

4) Digital Audio Time 1.0 is now installed on your hard
disk. To complete the installation, print out the DATIME.DOC
and REGISTER.DOC files.

5) For systems with a Sound Blaster, AdLib, or PC Speaker, at
the DOS prompt type:

DATIME

For systems with a Disney Sound Source, at the DOS prompt
type:

DATIME -D

6) This command should display:

Digital Audio Time version 1.0
COPYRIGHT (c) 1993 by Allen & Carole Grider
Shareware version - Continued use requires registration
The time is HH:MM [ PM ]

And you should hear the time being spoken.

Remember that you get one FREE disk from our large collection
of digital sound files when you register DATIME. See our
catalog (CATALOG.DOC) for descriptions.

QUICK INSTALLATION

1) Copy all the files from the floppy to a directory on your
hard disk. Print out the DATIME.DOC and REGISTER.DOC
files. Remember that this program is shareware. If you
continue to use it, you are required to register it.

2) Change to the directory that you copied DATIME to in
the step above. Type:

DATIME(for use with a Sound Blaster, AdLib or PC
Speaker)

or

DATIME -D(for use with a Disney Sound Source)

3) This command should display:

Digital Audio Time version 1.0
COPYRIGHT (c) 1993 by Allen & Carole Grider
Shareware version - Continued use requires registration
The time is HH:MM [ PM ]

And you should hear the time being spoken.

Remember that you get one FREE disk from our large collection
of digital sound files when you register DATIME. See our
catalog (CATALOG.DOC) for descriptions.


 December 11, 2017  Add comments

Leave a Reply