Dec 172017
 
Turbo Screen editor used to create ASCII screens. Also creates Turbo C or Turbo Pascal Source code. Easy to work with.
File SCRED1.ZIP from The Programmer’s Corner in
Category Miscellaneous Language Source Code
Turbo Screen editor used to create ASCII screens. Also creates Turbo C or Turbo Pascal Source code. Easy to work with.
File Name File Size Zip Size Zip Type
INSTALL.BAT 2584 656 deflated
INSTALL6.BAT 1048 416 deflated
README.DOC 8528 2742 deflated
SCRDISK1.EXE 129496 128206 deflated
SCRDISK2.EXE 109512 107213 deflated

Download File SCRED1.ZIP Here

Contents of the README.DOC file



Page 1 Turbo ScrEdit 1.6 [ReadMe.Doc]
(Shareware Version)

(C)opyright 1989, 1990 by iHn Systems.
P.O. Box 1707
Tulare CA. 93275-1707
(209) 688-7665
Answering machine available 24 hrs.

[About version 1.6]----------------------------------------------
Turbo ScrEdit 1.6 has many improvements over version 1.5, but is
completely source code compatible with all previous versions.
Improvements include:
1 - A new programmers reference manual.
2 - New tutor parts II and III (II deals with field validation
statements, III deals with programming techniques.)
3 - New version now supports true DUPE FIELDS, EDIT MASKS, FULL
COLOR RECONFIGURING PROGRAMMATICALLY (fields and screens).
Improved demonstration files and examples. New modes for
using ENTER as TAB, instantaneous field validation as data
is entered, automatic display of field help messages, and
much more!
4 - All new installation procedure (INSTALL.BAT).
5 - BATCH file procedures simplify generating the "Unit" and
"C" library files for programmers interfaces.
6 - Windows library has been improved and made much faster and
more flexible.

PREVIOUS TURBO SCREDIT USERS:
Delete all of the previous Turbo ScrEdit files and re-
install using INSTALL.BAT.

ScrEdit.Exe has been renamed to TScrEdit.Exe.

PREVIOUS VERSION ERRORS CORRECTED:
The run time error that would occasionally occur while using
the F4 compile screen option has been corrected.

The F9 ascii character override procedure has been
corrected.

Turbo ScrEdit seemed to Hang when any key was pressed other
that Y or N when prompting for confirmation during screen
selection - Now it continues to prompt until Y or N is
selected.

Automatic screen file backup is now optional - has Y or N
prompt.


[DISTRIBUTION DISKETTES]-----------------------------------------
DISK 1 OF 2: Contains the Turbo ScrEdit screen development
environment and PARTS I and II of the Turbo ScrEdit
Tutor.

DISK 2 OF 2: Contains the source code needed to compile and
create the programming interfaces required to access
and use screens stored in Turbo ScrEdit screen







Page 2 [ReadMe.Doc]
-----------------------------------------------------------------
libraries. Disk 2 of 2 also contains PART III of the
Turbo ScrEdit tutor, the programmers reference
manual, programming examples.

DISK 3: REGISTERED VERSION ONLY: Contains the "Pop Up"
windows interface files, a mailing label program
that demonstrates using Turbo ScrEdit screens and
windows to maintain a data base of mailing labels.
(Uses Turbo Database Toolbox). Other programming
examples as disk space allows.


[BULLETIN BOARD USERS]-------------------------------------------

If you have downloaded the Turbo ScrEdit files from a bulletin
board, you will want to unpack the files onto 2 (360k) floppy
diskettes. (One high density diskette will do, but it will be
easier to follow the installation instructions if you use two
diskettes.)

Unpack ScrEd1.Arc onto a diskette labeled "Disk 1 of 2".

Unpack ScrEd2.Arc onto a diskette labeled "Disk 2 of 2".

When you have successfully unpacked the files you will have two
diskettes that will contain the files listed below.

[DISK FILES DESCRIPTION]-----------------------------------------
(Registered version)
"Disk 1 of 2" "Disk 2 of 2" "Disk 3"
------------ ------------ --------------
ScrDisk1.Exe ScrDisk3.Exe See ReadMe.Doc
ScrDisk2.Exe ScrDisk4.Exe
ReadMe.Doc ScrDisk5.Exe
Install.Bat ReadMe.Doc
Install3.Bat
Install5.Bat

For a detailed description of each of the files in the Turbo
ScrEdit package, read the contents of the file "PrintMe.1st".
























Page 3 [ReadMe.Doc]
[INSTALLATION INSTRUCTIONS]--------------------------------------

The batch file INSTALL.BAT will help you install Turbo ScrEdit on
your system. The installation will vary depending on your system
configuration.

* Hard disk users* There is nothing special you will need to
do before beginning the installation. You will specify the name
of the directory that you want Turbo ScrEdit to be installed
into. The installation program will create the directory and four
additional sub-directories.

* Floppy disk users * You will need 5 formatted diskettes
for the installation. Some of the diskettes will only be required
until you can print the documents that they will hold. Before we
go further let me show you how the 5 diskettes will relate to the
hard drive installation.

Hard Disk Structure: Floppy diskettes labeled:
--------------------------- ------------------------------------
C:\UserDirectory "1 of 5 - Turbo ScrEdit"
C:\UserDirectory\Tutor "2 of 5 - Turbo ScrEdit Tutor"
C:\UserDirectory\Doc "3 of 5 - Programmers Ref. Manual"
C:\UserDirectory\Interfac "4 of 5 - Program Interface Modules"
C:\UserDirectory\Demos "5 of 5 - Examples and Demos"

(UserDirectory is specified by you during installation.)
-----------------------------------------------------------------

INSTALL.BAT requires three parameters and has a command line
format of:
INSTALL TYPE FROM: TO:[\PATH]
---- ----- ----------
TYPE: H when installing on a hard drive system.
F when installing on a floppy drive system.
FROM: The disk drive where the installation diskette has
been inserted.
TO:[\PATH]
FLOPPY DRIVE INSTALLATION: specify only the
destination disk drive (No Path, \ is assumed).

HARD DRIVE INSTALLATION: specify the drive and
path where you wish Turbo ScrEdit to reside.

TO BEGIN THE INSTALLATION: follow these 3 steps:

STEP 1 - Insert "Disk 1 of 2" into drive A:

STEP 2 - FLOPPY DRIVE INSTALLATION: Insert diskette "1 of 5"
into drive B: and type: B:

STEP 3 - HARD DRIVE INSTALLATION example:
A:INSTALL H A: C:\ScrEdit

- FLOPPY DRIVE INSTALLATION example:
A:INSTALL F A: B:

TO COMPLETE THE INSTALLATION: When INSTALL.BAT is finished, the
initial installation will be complete. However, there are still
several steps to be performed. Locate and print the file
"PrintMe.1st and continue the installation as described beginning
on Page 3.



 December 17, 2017  Add comments

Leave a Reply