Category : Lotus and other Spreadsheets
Archive   : PARADI.ZIP
Filename : CPYLTS.BAT

ECHO OFF
REM LOTUS DRIVER COPY FACILITY
REM %1 specifies 1-2-3 or Symphony
REM %2 specifies H or F for hard or floppy disk install
REM %3 specifies the drive and directory for a hard disk install
IF *%1 == * GOTO END
CLS
ECHO * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
ECHO * %1 drivers for the Paradise VGA Card
ECHO * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
ECHO * This procedure will copy new Lotus %1 drivers to
IF *%2 == *H ECHO * %1 directory on your hard disk at %3.
IF *%2 == *F ECHO * temporary work disk for use by your Lotus INSTALL program.
ECHO * These drivers support the use of the Paradise VGA in 800x600 or
ECHO * 640x480 graphics and 132 column text.
ECHO *
ECHO * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
IF *%2 == *F ECHO * If you do not have a blank work disk ready, or
ECHO * If this is not what you intend hold down [CTRL] while
ECHO * typing the letter C, then press the letter Y.
ECHO * Otherwise...
PAUSE
IF *%2 == *H GOTO HCOPY
CLS
ECHO * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
ECHO * If you have two floppy drives
ECHO * Insert your blank WORK DISK in your B: drive.
ECHO *
ECHO * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
ECHO *
ECHO * If you have only ONE floppy drive
ECHO * When prompted to insert the disk for the B: drive
ECHO * insert your blank WORK DISK in your floppy drive.
ECHO *
ECHO * When prompted to insert the disk for the A: drive
ECHO * insert the PARADISE VGA UTILITY disk in your drive.
ECHO *
ECHO * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
PAUSE
:FCOPY
COPY SP*.DRV B:\
GOTO DONE
:HCOPY
CLS
IF NOT EXIST %3\INSTALL.EXE GOTO ERROR1
COPY SP*.DRV %3
:DONE
CLS
ECHO * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
ECHO *
ECHO * Paradise VGA drivers for %1 copied
ECHO *
ECHO * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
ECHO * You will now need to use INSTALL to modify your %1 driver
ECHO * set to support the Paradise VGA extended capabilities.
ECHO * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
IF *%2 == *H IF EXIST %3\SINGLE.LBR GOTO ERROR2
GOTO END
:ERROR1
CLS
ECHO 
ECHO The pathname indicated does not contain the Lotus INSTALL program.
ECHO You must include the pathname of the directory that contains your
ECHO %1 program and utilities when you run this batch file.
IF *%1 == *Symphony ECHO SYMHD [drive:][path]
IF *%1 == *1-2-3 ECHO 123HD [drive:][path]
IF *%1 == *Symphony ECHO Note: You must be using Lotus Symphony Release 1.1, 1.2 or 2.0.
IF *%1 == *1-2-3 ECHO Note: You must be using Lotus 1-2-3 Release 2.0 or Release 2.01
ECHO to use these drivers.
GOTO END
:ERROR2
ECHO 
ECHO * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
IF *%1 == *Symphony ECHO * Attention: If you are using Symphony Release 1.1 your Symphony
IF *%1 == *1-2-3 ECHO * Attention: If you are using 1-2-3 Release 2.0 your 1-2-3
ECHO * directory already contains a file called SINGLE.LBR. You must delete
ECHO * this file before you run INSTALL, or you will not be able to add the new
ECHO * Paradise drivers.
ECHO *
IF *%1 == *Symphony ECHO * If you are using Symphony Rel 1.2 or 2.0 you do not need to delete this file.
IF *%1 == *1-2-3 ECHO * If you are using 1-2-3 Release 2.01 you do not need to delete this file.
ECHO * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
:END