Dec 062017
 
AsEasyAs Spreadsheet program 2 of 2.
File ASA55F-2.ZIP from The Programmer’s Corner in
Category Lotus and other Spreadsheets
AsEasyAs Spreadsheet program 2 of 2.
File Name File Size Zip Size Zip Type
ASA55U.DOC 2657 1172 deflated
ASA55U.EXE 106446 102460 deflated

Download File ASA55F-2.ZIP Here

Contents of the ASA55U.DOC file




-----------------------------------------------------------------
AS-EASY-AS Ver 5.5 Utility Disk (Disk #2)
-----------------------------------------------------------------
(C) Copyright 1992, TRIUS, Inc.

This is Disk #2 of a two-disk set of the AS-EASY-AS V5.5 program.
If you received the program on a 3.5" or a high density disk, it's
possible that all files from Disk #1 (Program Disk) and Disk #2
(Samples/Util Disk) are contained on ONE disk. If that's the
case, then any reference to Disk #2, (or Disk #1) below, should be
assumed to refer to your SINGLE disk.

Disk #2 Contains only two files. This (ASA55U.DOC) file and a Self-
Extract file (ASA55U.EXE) which is an archive containing all the sample
worksheets and other files. The files from ASA55U.EXE are extracted
during the installation process of AS-EASY-AS (i.e., executing
the INSTALL.EXE program on Disk #1). For more information,
please refer to the READ.ME text file on Disk #1.

To extract the files in ASA55U, manually, follow the simple steps
below:

1. Make sure you are at the DOS prompt
2. Log to the disk/drive where you want to install the files
(e.g., if installing to Drive C: directory ASA, your current
directory should be C:\ASA)
3. Place Disk #2 in your disk drive (A, B, C....)
4. Type d:ASA55U (where d is the Disk #2 drive) and press [ENTER]
(e.g., if Disk #2 is in drive A:, then type A:ASA55U and press
[ENTER]).
5. Read and follow the On-Screen Simple instructions.


After the files have been extracted from the archive, you may view, or
print the SAMPLES.DOC, any other files with the file extension .DOC, or
the on-disk user's manual (ASEASY.MAN).

To view these files on your screen, you may use your favorite file
lister utility, a text editor, your word processor (provided it can
handle ASCII files) or the DOS 'TYPE' command.

You may print the files by simply COPYing them to your printer device.
For example, to print the file SAMPLES.DOC, at the DOS prompt, type

COPY SAMPLES.DOC PRN and press [ENTER].

Alternatively, if you know what port your printer is connected to, you
may type substitute 'PRN', above, with LPT1, LPT2, COM1, COM2,...

Please, note that if you want to print the ASEASY.MAN file, you should
have at least 120 sheets of paper available in your printer.

If you are a registered user (Already have a printed bound manual) you
DO NOT need to print the ASEASY.MAN file!

------------------------------------------------------------------- END







 December 6, 2017  Add comments

Leave a Reply