Category : HD Utilities
Archive   : PS16DATA.ZIP
Filename : NOVELL.BAT

 
Output of file : NOVELL.BAT contained in archive : PS16DATA.ZIP
PROMPT $p$g
CLS
ECHO OFF
echo ********************** NOVELL 2.11 INSTALLATION ***********************
ECHO NOTES
ECHO *********************** PERSTOR SYSTEMS INC. **************************
ECHO 7631 East Greenway Road
ECHO Scottsdale, Arizona 85260
ECHO *
ECHO Novell 2.11 is delivered with a diskette labeled DSK_DRV_001
ECHO which contains (2) two important files:
ECHO ATDISK.OBJ (applicable to the Perstor 16F controller)
ECHO SCSI.OBJ (applicable to the Perstor 8XT/AT controller)
ECHO *
ECHO For the Perstor 16F on Novell 286 version 2.11:
ECHO *
ECHO 1. After all other machine setup is performed, use ATFSETUP
ECHO to select all or both of your disk drive types on the Perstor 16F
ECHO 2. Low level Format all or both of your Hard disks using ATFLFMT
ECHO as described in the Perstor manual
ECHO 3. Partition the first disk or the disk which will have DOS on it
ECHO using your Operating system's FDISK
ECHO 4. High level format the DOS partition using FORMAT C:/S
ECHO TO PERFORM THE INSTALLATION:
ECHO 5. DISKCOPY (Not copy) diskette DSK_DRV_001 onto a New Diskette
pause
ECHO 6. On the new diskette do the following:
ECHO Perform a Debug routine on ATDISK.OBJ
echo -E C1B
echo XXXX 64.FF 00.FF (this is the operand value
echo for a MOV CX,64)
echo -W
echo -Q
ECHO THE ATDISK.OBJ FILE IS NOW CORRECTED FOR MACHINES WITH HIGHER
ECHO OPERATING SPEEDS. This diskette should be used to generate
ECHO Your Novell 2.11 Systems using NETGEN. NETGEN will create a directory
ECHO KNOWN AS UTILEXE-.1, which will contain the COMPSURF files, with
ECHO THE PATCHED driver linked into COMPSURF. Make sure that the COMPSURF
ECHO FILES CONTAINED IN THAT UTILEXE-.1 ARE COPIED TO A FORMATTED DISKETTE
ECHO AND THAT COMPSURF IS RUN FROM THAT DISKETTE.
ECHO ATDISK.OBJ IS THE LINKABLE DRIVER FOR THE WD AND PERSTOR 16F
ECHO CONTROLLERS, BUT CONTAINS A MACHINE TIMING DEPENDENT SERIES
ECHO OF INSTRUCTIONS.
ECHO *
ECHO AFTER COMPLETING THESE PATCHES, GENERATE THE NOVELL SYSTEMS
ECHO AS STATED IN THE NOVELL MANUALS.
echo **********************************************************************
ECHO ON


  3 Responses to “Category : HD Utilities
Archive   : PS16DATA.ZIP
Filename : NOVELL.BAT

  1. Very nice! Thank you for this wonderful archive. I wonder why I found it only now. Long live the BBS file archives!

  2. This is so awesome! 😀 I’d be cool if you could download an entire archive of this at once, though.

  3. But one thing that puzzles me is the “mtswslnkmcjklsdlsbdmMICROSOFT” string. There is an article about it here. It is definitely worth a read: http://www.os2museum.com/wp/mtswslnk/