Category : HD Utilities
Archive   : MAX_IDE.ZIP
Filename : LXT-437A.TXT

 
Output of file : LXT-437A.TXT contained in archive : MAX_IDE.ZIP
===========================================================================
Maxtor LXT-437A ATA IDE Drive
===========================================================================

Key features:

* 12 read, 13 write msec average seek time
* Advanced buffer implementation (read ahead cache)
* Proven AT compatability
* Auto parking
* No Pre-Comp required

SPECIFICATIONS:

Performance;

Capacity, typical format
* Per drive (Mbytes)...........437
* Per sector (bytes)...........512
* Spare capacity (Mbytes)......8.7

AT Bus Transfer(Mbytes)........6.0

Disk Transfer (Mbits/sec)......13.27

Seek time (msec), typical
* Read.........................12
* Write........................13
* Track to Track................3
* Maximum......................30

Rotational Speed (RPM).......3600 +/- 5%

Average latency (msec).......8.33

FUNCTIONAL:

* Data zones....................8
* Bit density (Kbpi)........33-44
* Track density (tpi).......1,600
* Disks.........................5
* Data heads....................9
* Servo heads...................1
* Physical tracks..........13,977
* Sectors per track.........47-72
* Physical cylinders........1,560

PHYSICAL:

Dimentions

* Height....................1.625 in. (41.3 mm)
* Width.....................4.000 in. (101.6 mm)
* Depth 5.750 in. (146 mm)
* Weight....................2.2 lb. (1 kg.)

Temperature limits

* Operating.................5-50 (C)
* Non-operating...........-40-65 (C)
* Temperature gradiant/Hr..20 (C)/hr.

Relative humidity limits ( Non condensing)

* Operating.................5 to 80%
* Non-operating.............5 to 80%
* Maximum gradiant/Hr............20%
* Maximum wet bulb...............27.6 (C)

Shock (G's)

* Non-operating..................50
* Operating (no errors)...........3
* Operating (recoverable errors).10

POWER:

* +12VDC +/- 5%, 0.6A (typical) 2.1A, Max.
* +5VDC +/- 5%, 0.5A (typical)
* Power dissapation (typical) 11 WAtts

RELIABILITY:

MTBF.......................150,000 Hrs.
PM........................Not Required
MTTR........................20 Minutes
Component design life..........5 years(min)

==============================================================================

LXT-xxxA PCB Layout
ÚÄÄÄÄÂÄÄÄÄÄÄÄÄÄ¿ ÚÄÄ¿ ÚÄÄÄÄÄÄÄÄÄÄ¿ ÚÄÄÄ¿ ÚÄÄÄÄÄÄÄÄÄ¿ ÚÄ¿ ÚÄÄÄÄÄÄÄÄÄÄ¿
³ ³ ÀÄÙ ÀÄÄÙ ÀÄÄÙ ÀÄÄÄÄÙ ÀÄÄÙ ÀÄÄÙ ³
³ J3 ³ ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» ³
³ ³ J6 º 9 7 5 3 1 º ³
ÀÄÄÄÂÙ ÚÄÄÄÄÄ¿ º ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ º ÚÄÂÄÅ
ÚÄÄÄÁ¿ ³:::|:³<ÄÄÄÄÄÄÄĶ ³ * * * Û * ³ º ³ ÃÄÅ
³ Ã ÀÄÄÄÄÄÙ º ³ * * * Û * ³ º J5 ³ ÃÄÅ
³ Ã º ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ º ³ ÃÄÅ
³ Ã º 10 8 6 4 2 º ÀÄÁÄÅ
³ à ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ ÚÄÂÄÅ
³ Ã ³ ÃÄÅ
³ J1 Ã ³ ÃÄÅ
³ Ã J2 ³ ÃÄÅ
³ Ã ³ ÃÄÅ
³ Ã ³ ÃÄÅ
³ Ã ³ ÃÄÅ
³ Ã ÀÄÁÄÅ
³ Ã ÚÄÂÄÅ
ÀÄÄÄÂÙ J4 ³ ÃÄÅ
³ ÚÄ¿ To attach an external LED, use pins 9-10ÄÄÄÄÄÄÄ> ÀÄÁÄÅ
ÀÄÄÄÄÄÄÙ ³ ÚÄÄÙ
ÚÄÄÄÄÄÄÄÄÙ ÀÄÄ¿
ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ

LXT-A Jumper Designations ³1-2³3-4³5-6³7-8³9-10³
ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÄ´
³ Master/Slave ³ ³ ³ ³ ³ ³
³ Only drive in single drive sys ³ R ³ ³ ³ ³ ³
³ Master in dual drive system ³ R ³ ³ ³ ³ ³
³ Slave in dual drive system ³ J ³ ³ ³ ³ ³
ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÄ´
³ Drive Active (System LED) ³ ³ J ³ ³ ³ ³
ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÄ´
³ Slave Present ³ ³ ³ ³ ³ ³
³ One drive in single drive sys ³ ³ ³ R ³ ³ ³
³ Master in dual drive system ³ ³ ³ R ³ ³ ³
³ Slave in dual drive system ³ ³ ³ O ³ ³ ³
ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÄ´
³ Two Drive System ³ ³ ³ ³ ³ ³
³ One drive in single drive sys ³ ³ ³ ³ R ³ ³
³ Master in dual drive sys ³ ³ ³ ³ J ³ ³
³ Slave in dual drive sys ³ ³ ³ ³ R ³ ³
ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÄ´
³ Sync Spindle Pulse Source ³ ³ ³ ³ ³ ³
³ If receiving pulse ³ ³ ³ ³ ³ R ³
³ If transmitting pulse* ³ ³ ³ ³ ³ J ³
ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÁÄÄÄÁÄÄÄÁÄÄÄÁÄÄÄÄÙ
J=Jumpered R=Removed O=Optional
*=This jumper may only be used
only on one drive in an array

CMOS Configuration: Cyls Hds Write Landing Sec/Trk
PreComp Zone
416.9MB Capacity ---------------------------------
(437 Million Bytes) 847 16 0 847 63

LXT-437A & LXT-437S are trademarks of Maxtor Corporation.
AT is a registered trademark of IBM Corporation.
Specifications subject to change without notice.
Copyright 1992 Maxtor Corporation.
==============================================================================


  3 Responses to “Category : HD Utilities
Archive   : MAX_IDE.ZIP
Filename : LXT-437A.TXT

  1. Very nice! Thank you for this wonderful archive. I wonder why I found it only now. Long live the BBS file archives!

  2. This is so awesome! 😀 I’d be cool if you could download an entire archive of this at once, though.

  3. But one thing that puzzles me is the “mtswslnkmcjklsdlsbdmMICROSOFT” string. There is an article about it here. It is definitely worth a read: http://www.os2museum.com/wp/mtswslnk/