Category : A Collection of Games for DOS and Windows
Archive   : NTRAID01.ZIP
Filename : PROBLEMS.TXT

 
Output of file : PROBLEMS.TXT contained in archive : NTRAID01.ZIP
This file contains a list of problems that you might have with Night Raid,
and what you can do about them.

Problem: The game hangs on the startup screen.
Solution: Some of Night Raid's device detection code is conflicting
with something in your system. The following are command line switches that
disable certain attempts at detection. Use use them, start Night Raid by
typing "NITERAID /xxx" ("NTR /xxx" for the shareware version), where "xxx"
is one of the following:
GRAPHICS Disables VGA card detection.
NOMOUSE Disables Mouse/mouse driver detection.
NOADLIB Disables AdLib and SoundBlaster detection.
NOSOUNDBLASTER Disables SoundBlaster detection.
NOSOUNDSOURCE Disables Sound Source detection.

Problem: The game pauses every once and awhile.
Solution: Night Raid is having a hard time fitting everything it needs
into memory. Try making more memory available to the game by removing any
TSRs you don't need, or using an EMS emulator (such as EMM386.SYS) to make
more memory available to Night Raid. To make Night Raid use the EMS, use
"NITERAID /USEEMS" to start the game.

Problem: The game hangs during play, or the sounds stop playing.
Solution: Night Raid can make heavy demands on the system -
simultaneously reading from the disk and playing multiple sound effects from
EMS. Some EMS setups have a difficult time with this. If you're using EMS,
try running Night Raid without it. Some SoundBlaster cards may have
problems with Night Raid's autodetection, or problems may crop up if you
have set your SoundBlaster up in a non-standard way - see the section below
on setting the "BLASTER" environment variable.

Problem: I'm using OS/2, and Night Raid interferes with printing.
Solution: This is probably because of the Sound Source autodetection.
Use "NITERAID /NOSOUNDSOURCE" to avoid the autodetection.

Problem: The colors are really messed up.
Solution: Some video cards manage to get by Night Raid's test code. Use
"NITERAID /SLOWPALETTE" to start the game.

Problem: Night Raid doesn't recognize my Sound Source.
Solution: If you're using your Sound Source with a Tandy machine, use
"NITERAID /SSTANDY". If you're not using a Tandy, try using "NITERAID /SS?",
where the '?' represents the LPT port you have the Sound Source attached to.
For example, if you have your Sound Source attached to LPT2, then you'd use
"NITERAID /SS2". Note that, if you're using a Tandy, and the "/SSTANDY"
switch by itself doesn't work, you'll have to use both "/SSTANDY" AND "/SS?".

Problem: Night Raid doesn't recognize my AdLib or SoundBlaster card.
Solution: Night Raid's AdLib detection relies on bus speed, which works
on almost all systems. However, it may not work on some REALLY fast systems.
Start Night Raid with "NITERAID /ADLIB".

Problem: Night Raid doesn't recognize my SoundBlaster card.
Solution: Odds are that you have changed the SoundBlaster's settings, so
Night Raid can't find the card. To fix this, you need to tell Night Raid
about the non-default settings.

You do this by setting the "BLASTER" environment variable up to contain
the appropriate information. To set the enviroment variable up, either
include the following in your AUTOEXEC.BAT file or type it on the command
line before running Night Raid:
SET BLASTER=Axxx Ix Dx

Axxx represents the the address of the SoundBlaster/SB Pro. For the SB, it's
either A210,A220,A230,A240,A250 or A260. For the SB Pro, it's either A220 or
A240. Default is A220.

Ix represents the IRQ number used by the SB/SB Pro. For the SB, it's either
I2, I5, or I7. IRQ 10 (only available on a machine with AT BIOS and the SB
Pro) is not supported. Default is I7.

Dx represents the DMA channel used by the SB/SB Pro. D0, D1, or D3 are
acceptable values. Default is D1.



  3 Responses to “Category : A Collection of Games for DOS and Windows
Archive   : NTRAID01.ZIP
Filename : PROBLEMS.TXT

  1. Very nice! Thank you for this wonderful archive. I wonder why I found it only now. Long live the BBS file archives!

  2. This is so awesome! 😀 I’d be cool if you could download an entire archive of this at once, though.

  3. But one thing that puzzles me is the “mtswslnkmcjklsdlsbdmMICROSOFT” string. There is an article about it here. It is definitely worth a read: http://www.os2museum.com/wp/mtswslnk/