17number of strings
28End of file on the terminal!
42(That makes 100 errors; please try again.)
22You want to edit file
09 at line
44R to run without stopping, Q to run quietly,
23I to insert something,
20E to edit your file,
561 or ... or 9 to ignore the next 1 to 9 tokens of input,
22H for help, X to quit.
44I have just deleted some text, as you asked.
48You can now delete more, or insert, or whatever.
50Sorry, I don't know how to help in this situation.
36Maybe you should try asking a human?
42Sorry, I already gave what help I could...
59An error might have occurred before I noticed any problems.
45``If all else fails, read the instructions.''
35METAFONT capacity exceeded, sorry [
44If you really absolutely need more capacity,
35you can ask a wizard to enlarge me.
19This can't happen (
59I'm broken. Please show this to someone who can fix can fix
35I can't go on meeting you like this
55One of your faux pas seems to have wounded me deeply...
59in fact, I'm barely conscious. Please fix it and try again.
57Try to insert some instructions for me (e.g.,`I show x'),
43unless you just want to quit by typing `X'.
19' has been inserted
59Uh, oh. A little while ago one of the quantities that I was
59computing got too large, so I'm afraid your answers will be
55somewhat askew. You'll probably have to adopt different
54tactics next time. But I shall try to carry on anyway.
15Square root of
23 has been replaced by 0
52Since I don't take square roots of negative numbers,
52I'm zeroing this one. Proceed, with fingers crossed.
48Since I don't take logs of non-positive numbers,
27angle(0,0) is taken as zero
54The `angle' between two identical points is undefined.
16main memory size
24AVAIL list clobbered at
31Double-AVAIL list clobbered at
24Doubly free location at
12Bad flag at
14New busy locs:
14a bad variable
16, before choices
15, after choices
23Some number got too big
46The path that I just computed is out of range.
53So it will probably look funny. Proceed, for a laugh.
31Scaled picture would be too big
50I can't yscale the picture as requested---it would
45make some coordinates too large or too small.
42Proceed, and I'll omit the transformation.
50I can't xscale the picture as requested---it would
15move table size
21(No new edges added.)
24 % beginning in octant `
19% entering octant `
08 & cycle
11 % segment
33, before subdivision into octants
19, after subdivision
43, after subdivision and double autorounding
36, after subdivision and autorounding
18Curve out of range
56At least one of the coordinates in the path I'm about to
56digitize was really huge (potentially bigger than 4095).
40So I've cut it back to the maximum size.
41The results will probably be pretty wild.
19rounding table size
09 .. cycle
16 (newly created)
13Pen too large
59The cycle you specified has a coordinate of 4095.5 or more.
55So I've replaced it by the trivial path `(0,0)..cycle'.
24Pen cycle must be convex
59The cycle you specified either has consecutive equal points
54or turns right or turns through more than 360 degrees.
16pen polygon size
23@ retrograde line from
18@ transition line
20Value is too large (
53The equation I just processed has given some variable
54a value of 4096 or more. Continue and I'll try to cope
47with that big value; but it might be dangerous.
47(Set warningcheck:=0 to suppress this message.)
15Bad PREVDEP at
16Out of order at
43I already knew that this equation was true.
50But perhaps no harm has been done; let's continue.
23[unknown command code!]
16input stack size
17text input levels
47Incomplete if; all text was ignored after line
51A forbidden `outer' token occurred in skipped text.
58This kind of error happens when you say `if...' and forget
57the matching `fi'. I've inserted a `fi'; this might work.
53The file ended while I was skipping conditional text.
21Forbidden token found
16 while scanning
41I suspect you have forgotten an `enddef',
52causing me to read past where you wanted me to stop.
49I'll try to recover; but if the error is serious,
51you'd better type `E' or `X' now and fix your file.
27to the end of the statement
42A previous error seems to have propagated,
15a text argument
45It seems that a right delimiter was left out,
18the definition of
14the text of a
41I suspect you have forgotten an `endfor',
39Text line contains an invalid character
53A funny symbol that I can't read has just been input.
48Continue, and I'll forget that it ever happened.
40Incomplete string token has been flushed
53Strings should finish on the same line as they began.
50I've deleted the partial string; you might want to
48insert another by typing, e.g., `I"new string"'.
32Enormous number has been reduced
52I can't handle numbers bigger than about 4095.99998;
53so I've changed your constant to that maximum amount.
36(Please type a command or say `end')
37*** (job aborted, no legal end found)
31Missing symbolic token inserted
52Sorry: You can't redefine a number, string, or expr.
49I've inserted an inaccessible symbol so that your
60definition will be completed without mixing me up too badly.
51Sorry: You can't redefine my error-recovery tokens.
50The next thing in this `def' should have been `=',
54because I've already looked at the definition heading.
49But don't worry; I'll pretend that an equals sign
45was present. Everything from here to `enddef'
43will be the replacement text of this macro.
41This variable already starts with a macro
44After `vardef a' you can't say `vardef a.b'.
40So I'll have to discard this definition.
46Missing parameter type; `expr' will be assumed
52You should've had `expr' or `suffix' or `text' here.
20parameter stack size
40I'm not currently working on a for loop,
40so I had better not try to end anything.
53I'm confused; after exiting from a loop, I still seem
53to want to repeat it. I'll try to forget the problem.
22No loop is in progress
51Why say `exitif' when there's nothing to exit from?
35I shall pretend that one was there.
20*** (loop confusion)
12Not a string
41I'm going to flush this expression, since
48scantokens should be followed by a known string.
22Too many arguments to
11 Missing `
52I'm going to assume that the comma I just read was a
57right delimiter, and then I'll begin expanding the macro.
55You might want to delete some tokens before continuing.
20Missing argument to
48That macro has more parameters than you thought.
54I'll continue by pretending that each missing argument
23is either zero or null.
54I've finished reading a macro argument and am about to
56read another; the arguments weren't delimited correctly.
51I've gotten to the end of the macro parameter list.
57I've got the first argument; will look now for the other.
49There should've been a colon after the condition.
43I'm ignoring this; it doesn't match any if.
38When you say `for x=a step b until c',
43the initial value `a' and the step size `b'
55and the final value `c' must have known numeric values.
57The next thing in this loop should have been `=' or `:='.
47was present, and I'll look for the values next.
51The next thing in this loop should have been a `:'.
41So I'll pretend that a colon was present;
50everything from here to `endfor' will be iterated.
47I assume you meant to say `until' after `step'.
48So I'll look for the final value and colon next.
15input file name
19I can't find file `
23I can't write on file `
20Please type another
45*** (job aborted, file error in nonstop mode)
20transcript file name
20file name for output
37File names can't appear within macros
46Sorry...I've converted what follows to tokens,
37possibly garbaging the name you gave.
51Please delete the tokens and insert the name again.
26 (see the transcript file)
13 (future pen)
30 expression can't begin with `
58I'm afraid I need some sort of value in order to continue,
49so I've tentatively inserted `0'. You may want to
43delete this zero and insert something else;
50see Chapter 27 of The METAFONTbook for an example.
39Nonnumeric ypart has been replaced by 0
48I thought you were giving me a pair `(x,y)'; but
50after finding a nice xpart `x' I found a ypart `y'
54that isn't of numeric type. So I've changed y to zero.
59(The y that I didn't like appears above the error message.)
22A group begun on line
12 never ended
56I saw a `begingroup' back there that hasn't been matched
47by `endgroup'. So I've inserted `endgroup' now.
16Division by zero
43I'll pretend that you meant to divide by 1.
44Improper subscript has been replaced by zero
54A bracketed subscript must have a known numeric value;
59unfortunately, what I found was the value that appears just
55above this error message. So I'll try a zero subscript.
21 has been obliterated
54It seems you did a nasty thing---probably by accident,
46but nevertheless you nearly hornswoggled me...
50While I was evaluating the right-hand side of this
51command, something happened, and the left-hand side
52is no longer a variable! So I won't change anything.
51While I was evaluating the suffix of this variable,
55something was redefined, and it's no longer a variable!
59In order to get back on my feet, I've inserted `0' instead.
47I've scanned an expression of the form `a[b,c',
41so a right bracket should have come next.
51I've seen a `[' and a subscript value, in a suffix,
24Pen path must be a cycle
39I can't make a pen from the given path.
49Undefined coordinates have been replaced by (0,0)
49I need x and y numbers for this part of the path.
42The value I found (see above) was no good;
48so I'll try to keep going by using zero instead.
45(Chapter 27 of The METAFONTbook explains that
36you might want to type `I ???' now.)
45Undefined x coordinate has been replaced by 0
51I need a `known' x value for this part of the path.
45Undefined y coordinate has been replaced by 0
51I need a `known' y value for this part of the path.
49I've scanned a direction spec for part of a path,
39so a right brace should have come next.
36Improper curl has been replaced by 1
43A curl must be a known, nonnegative number.
46I've got the x coordinate of a path direction;
36will look for the y coordinate next.
45A path join command should end with two dots.
34Improper tension has been set to 1
53The expression above should have been a number >=3/4.
46Paths don't touch; `&' will be changed to `..'
48When you join paths `p&q', the ending point of p
49must be exactly equal to the starting point of q.
53So I'm going to pretend that you said `p..q' instead.
46Undefined condition will be treated as `false'
53The expression shown above should have had a definite
48true-or-false value. I'm changing it to `false'.
40*** (cannot readstring in nonstop modes)
59I'm afraid I don't know how to apply that operation to that
53particular type. Continue, and I'll simply return the
54argument (shown above) as the result of the operation.
30String contains illegal digits
55I zeroed out characters that weren't in the range 0..7.
48I zeroed out characters that weren't hex digits.
18Number too large (
57I have trouble with numbers greater than 4095; watch out.
58combination of types. Continue, and I'll return the second
52argument (see above) as the result of the operation.
49The quantities shown above have not been equated.
60Oh dear. I can't decide if the expression above is positive,
59negative, or zero. So this comparison test won't be `true'.
41Unknown relation will be considered false
58You're trying to divide the quantity shown above the error
55message by zero. I'm going to divide it by one instead.
32Improper transformation argument
46The expression shown above has the wrong type,
39so I can't transform anything using it.
37Transform components aren't all known
56I'm unable to apply a partially specified transformation
42except to a fully known pair or transform.
31That transformation is too hard
49I can apply complicated transformations to paths,
49but I can only do integer operations on pictures.
16Too far to shift
49I can't shift the picture as requested---it would
30A statement can't begin with `
51I was looking for the beginning of a new statement.
58If you just proceed without changing anything, I'll ignore
56everything up to the next `;'. Please insert a semicolon
58now in front of anything that you don't want me to delete.
52(See Chapter 27 of The METAFONTbook for an example.)
28Extra tokens will be flushed
59I've just read as much of that statement as I could fathom,
59so a semicolon should have been next. It's very puzzling...
53but I'll try to get myself back together, by ignoring
40I couldn't find an `=' or `:=' after the
50expression that is shown above this error message,
44so I guess I'll just ignore it and carry on.
36Improper `:=' will be changed to `='
54I didn't find a variable name at the left of the `:=',
50so I'm going to pretend that you said `=' instead.
19Internal quantity `
28' must receive a known value
56I can't set an internal quantity to anything but a known
54numeric value, so I'll have to ignore this assignment.
30Equation cannot be performed (
58I'm sorry, but I don't know how to make such things equal.
55(See the two expressions just above the error message.)
34Redundant or inconsistent equation
56An equation between already-known quantities can't help.
50But don't worry; continue and I'll just ignore it.
58The equation I just read contradicts what was said before.
09 (off by
48Declared variable conflicts with previous vardef
56You can't use, e.g., `numeric foo' after `vardef foo'.
51Proceed, and I'll ignore the illegal redeclaration.
51Illegal suffix of declared variable will be flushed
50Variables in declarations must consist entirely of
46names and collective subscripts, e.g., `xa'.
57Are you trying to use a reserved word in a variable name?
43I'm going to discard the junk I found here,
51up to the next comma or the end of the declaration.
49Explicit subscripts like `x15a' aren't permitted.
44I'm not currently working on a `begingroup',
46Always say `randomseed:=
29Unknown value will be ignored
48Your expression was too random for me to handle,
43so I won't change the random seed just now.
55I found no right delimiter to match a left one. So I've
56put one in, behind the scenes; this may fix the problem.
11The token `
32' is no longer a right delimiter
48Strange: This token has lost its former meaning!
44I'll read it as a right delimiter this time;
43but watch out, I'll probably miss it later.
28' isn't an internal quantity
55Something like `tracingonline' should follow `interim'.
46You should have said `let symbol = something'.
55was present. The next token I read will be `something'.
19number of internals
25t delimiter that matches
17[repeat the loop]
17 still untouched)
56This isn't an error message; I'm just showing something.
54Next time say `withweight
55I'll ignore the bad `with' clause and look for another.
47Next time say `withpen
40Weight must be -3, -2, -1, +1, +2, or +3
20 is the wrong type (
45I was looking for a "known" picture variable.
37So I'll not change anything just now.
23Not a suitable variable
61At this point I needed to see the name of a picture variable.
58(Or perhaps you have indeed presented me with one; I might
59have missed it, if it wasn't followed by the proper token.)
54This expression should have specified a known picture.
46This expression should have been a known path.
11Not a cycle
58That contour should have ended with `..cycle' or `&cycle'.
37Strange path (turning number is zero)
43Backwards path (turning number is negative)
53The path doesn't have a counterclockwise orientation,
41so I'll probably have trouble drawing it.
51(See Chapter 27 of The METAFONTbook for more help.)
17Bad window number
42It should be the number of an open window.
52Say `openwindow k from (r0,c0) to (r1,c1) at (x,y)',
57where all quantities are known and k is between 0 and 15.
19Bad culling amounts
44Always cull by known amounts that exclude 0.
46A message should be a known string expression.
32(That was another `errmessage'.)
51This error message was generated by an `errmessage'
43command, so I can't give any explicit help.
51Pretend that you're Miss Marple: Examine all clues,
41and deduce the truth by inspired guesses.
17 has been reduced
48Font metric dimensions must be less than 2048pt.
35Invalid code has been replaced by 0
54I was looking for a number between 0 and 255, or for a
55string of length 1. Didn't find it; will use 0 instead.
12 is already
13in a ligtable
13in a charlist
51It's not legal to label a character more than once.
43I was looking for a known, positive number.
50For safety's sake I'll ignore the present command.
56A colon should follow a headerbyte or fontinfo location.
21Illegal ligtable step
38I was looking for `=:' or `kern' here.
15Too far to skip
57At most 127 lig/kern steps can separate skipto1 from 1::.
51The amount of kern should be a known numeric value.
39I'm processing `extensible c: t,m,b,r'.
23Improper font parameter
41 values had to be adjusted by as much as
47(illegal design size has been changed to 128pt)
26file name for font metrics
24Font metrics written on
15:: was missing)
24(a font metric dimension
23 font metric dimensions
21 had to be decreased)
17 METAFONT output
19 (just shipped out)
51(There's unbounded black in character shipped out!)
59The expression shown above has the wrong type to be output.
18Output written on
25 strings of total length
43 memory locations dumped; current usage is
16 symbolic tokens
17 (preloaded base=
14base file name
26Beginning to dump on file
22Transcript written on
19(end occurred when
09 on line
16 was incomplete)
52(see the transcript file for additional information)
33(dump is performed only by INIMF)
21debug # (-1 to exit):