Dec 162017
 
SKEM is an easy to use (user friendly) schematic drawing program designed to provide the user with the ability to produce high quality printed schematic drawings.
File SKEM10.ZIP from The Programmer’s Corner in
Category Science and Education
SKEM is an easy to use (user friendly) schematic drawing program designed to provide the user with the ability to produce high quality printed schematic drawings.
File Name File Size Zip Size Zip Type
AC_PLUG.SCR 190 83 deflated
AMP1.SCR 68 35 deflated
AND_2IN.SCR 115 67 deflated
AND_3IN.SCR 130 70 deflated
ANTENNA.SCR 68 34 deflated
ARROW_D1.SCR 92 49 deflated
ARROW_D2.SCR 77 43 deflated
ARROW_DN.SCR 92 49 deflated
ARROW_IN.SCR 120 51 deflated
ARRW_OUT.SCR 120 54 deflated
BATTERY1.SCR 98 60 deflated
BATTERY2.SCR 157 77 deflated
BOX1.SCR 68 29 deflated
BOX2.SCR 68 29 deflated
BOX3.SCR 68 29 deflated
BRIDGE1.SCR 344 131 deflated
BRIDGE2.SCR 331 122 deflated
CAP_ELEC.SCR 127 68 deflated
CAP_FIX.SCR 66 39 deflated
CHOKE.SCR 181 79 deflated
CIRCLE16.SCR 20 17 deflated
CIRCLE24.SCR 20 17 deflated
CIRCLE4.SCR 20 17 deflated
CIRCLE8.SCR 18 16 deflated
COIL.SCR 151 69 deflated
CONNECT1.SCR 53 32 deflated
CONNECT2.SCR 53 30 deflated
COUR07F0.SFL 6468 2802 deflated
CRYSTAL.SCR 128 62 deflated
DASH1.SCR 83 52 deflated
DASH2.SCR 98 54 deflated
DASH3.SCR 353 111 deflated
DASH4.SCR 422 121 deflated
DB9.SCR 130 71 deflated
DB_CONN.SCR 122 60 deflated
DIODE.SCR 92 55 deflated
DOT.SCR 81 44 deflated
D_LINE1.SCR 23 18 deflated
D_LINE3.SCR 23 18 deflated
D_LINE5.SCR 23 17 deflated
EGAVGA.BGI 5554 4021 deflated
FET_DUAL.SCR 326 119 deflated
FET_N.SCR 266 107 deflated
FUSE.SCR 111 70 deflated
GND_COLD.SCR 67 43 deflated
GND_HOT.SCR 83 49 deflated
HEAD.SCR 213 98 deflated
HELP.DOC 15177 5088 deflated
INSTALL.EXE 11696 7704 deflated
JK_EAR.SCR 153 70 deflated
JK_EARSW.SCR 293 102 deflated
JK_PHONE.SCR 62 36 deflated
JK_STERO.SCR 209 81 deflated
LEDARROW.SCR 206 83 deflated
LITT.CHR 5131 2118 deflated
MAKE_PTR.EXE 32336 18000 deflated
MIC.SCR 100 61 deflated
MOTOR1.SCR 215 83 deflated
MOTOR2.SCR 218 87 deflated
NAND_2IN.SCR 127 74 deflated
NAND_3IN.SCR 142 77 deflated
NOR_2IN.SCR 131 79 deflated
NOR_3IN.SCR 146 85 deflated
NPN.SCR 251 109 deflated
OPENING.TXT 3232 1179 deflated
OP_AMP.SCR 143 69 deflated
OR_2IN.SCR 134 78 deflated
OR_3IN.SCR 149 83 deflated
OUTLET.SCR 218 87 deflated
PHOT_NPN.SCR 236 106 deflated
PLUG_EAR.SCR 272 100 deflated
PNP.SCR 251 111 deflated
README.TXT 586 321 deflated
REGISTER.FRM 1274 402 deflated
RES_FIX.SCR 201 79 deflated
RES_VAR.SCR 316 120 deflated
SAMPLE.SKM 800 321 deflated
SCR.SCR 122 66 deflated
SKEM.CFG 205 107 deflated
SKEM.EXE 93664 44622 deflated
SPEAKER.SCR 143 67 deflated
SW_2POS.SCR 173 84 deflated
SW_3POS.SCR 200 96 deflated
SW_BUTT.SCR 161 78 deflated
SW_SLIDE.SCR 158 79 deflated
SW_SP_NC.SCR 161 76 deflated
SW_SP_NO.SCR 146 75 deflated
SYM_SCR.IDX 1174 495 deflated
TESTPIN1.SCR 83 43 deflated
TESTPIN2.SCR 92 52 deflated
VARICAP.SCR 122 64 deflated
X1.SCR 38 23 deflated
X2.SCR 38 23 deflated
XFORM_A.SCR 294 106 deflated
XFORM_I.SCR 324 117 deflated
XOR_2IN.SCR 151 83 deflated
XOR_3IN.SCR 166 86 deflated
ZENER.SCR 122 66 deflated

Download File SKEM10.ZIP Here

Contents of the README.TXT file


SKEM 1.0 Installation Instructions

The install program will ask which drive you wish to
install SKEM 1.0 on. It then will create a subdirectory
of SKEM and copy all the files from the floppy to that
drive's subdirectory. After copying all the files the
install program will execute the MAKE_PTR.EXE program.
The MAKE_PTR will read each of the .SCR symbol files and
create a laser printer bit-map file (.PTR) of that symbol.

After the install program is finished, you will be returned
to DOS. To run SKEM 1.0, just type in SKEM and hit the
ENTER key.

Enjoy......



 December 16, 2017  Add comments

Leave a Reply