Category : Science and Education
Archive   : ORCAD.ZIP
Filename : READ.ME

 
Output of file : READ.ME contained in archive : ORCAD.ZIP
*************************************************
*** ***
*** OrCAD/PCB Demonstration Disk ***
*** ***
*************************************************

Accompanying this program disk is a short booklet called "The OrCAD/PCB
Demo Guide". This demonstration is interactive: it requires your
participation. In the Demo Guide are step-by-step instructions telling
you how to use the program to layout a simple, example PCB. The
demonstration covers most of OrCAD/PCB's layout features. Also
included in the Demo Guide is a short command reference: it tells you a
little about each one of OrCAD/PCB's features, even those not covered
in the step-by-step demo.

After you complete the step-by-step demonstration, we urge you to
experiment on your own with the program. Two additional sample layouts
are included on this disk in the DESIGN subdirectory.

This demonstration program requires a MOUSE be installed. Be sure your
Mouse driver is installed (consult your Mouse reference manual for
information on the installation process).

*******************************************************************************

Demo Guide Errata:

Please note these corrections to the demo guide.

pg. 10 OrCAD/PCB's grid is now set at 0.050 inches (50 mils).
pg. 11 Footnote 4. DBSM should read DB9M; SSIP100 should read 6SIP100.
pg. 13 Step 6. should read .
Note: module names are replaced when the Use Netlist command is issued.
pg. 15 Step 3. After selecting Begin, press or click the left mouse
button two times.
pg. 15 Step 8. Use the mouse to perform this step.
pg. 17 Step 6. Table 1 is on this page.
pg. 20 Step 4. After this step, press or click the right mouse button.
pg. 20 Step 5e. Use the mouse to perform this step.
pg. 20 Step 7. Select Begin should read: Press .
pg. 21 You will route one track manually, not two tracks.
pg. 23 Step 2 should read Place Module Move.
pg. 23 Step 4. Type the letter

or press to use the Place command.
pg. 28 Step 6c should read: Select Erase Routes. The prompt Erase All Tracks?
appears. Select Yes to erase all tracks.
pg. 28 Step 1 should read: Press either the right mouse button or to
return to the Routing command line.
pg. 29 Figure 18 shows plots in this order (front to back):
layer 1, layer 2, silkscreen, drill template, solder mask.

To exit the OrCAD/PCB demo program, use the QUIT Abandon command.

*******************************************************************************

Currently available display and plotter drivers for OrCAD/PCB:


Display Resolution Colors
----------------------------------------------------------------
Color Graphics Adapter CGA4.DRV 320x200 4
EGA standard monitor EGA16C1.DRV 320x200 16
Color Graphics Adapter CGA2.DRV 640x200 2
EGA standard monitor EGA16C2.DRV 640x200 16
Tecmar Graphics Master TGM16N.DRV 640x200 16
EGA Monochrome monitor EGA2.DRV 640x350 1
EGA (64K RAM) EGA4E.DRV 640x350 4
EGA Enhanced monitor EGA16E.DRV 640x350 16
AT&T 6300 ATT2C.DRV 640x400 2
HP Vectra Multi-Video HPVECTRA.DRV 640x400 2
NCR graphics adapter NCR2.DRV 640x400 2
Tandy 2000 Graphics TANDY2K.DRV 640x400 2
Televideo TeleCAT TELECAT.DRV 640x400 2
Toshiba 3100 Laptop T3100.DRV 640x400 2
Wyse-700 WYSE700A.DRV 640x400 2
NCR graphics adapter NCR4.DRV 640x400 4
AT&T 6300 DEB ATT16C.DRV 640x400 16
Sigma 400 SIGMA400.DRV 640x400 16
Tecmar Graphics Master TGM16I.DRV 640x400 16
IBM PS/2 MCGA MCGA480.DRV 640x480 1
Color Graphic Comm. EGASQ640.DRV 640X480 16
Everex Micro Enhancer EVERX640.DRV 640x480 16
GENOA SuperEGA GENOA640.DRV 640x480 16
IBM PS/2 VGA VGA640.DRV 640x480 16
Paradise Autoswitch PEGA640.DRV 640x480 16
TSENG LABS EVA-480 EVA480.DRV 640x480 16
QuadEGA ProSync VEGA640.DRV 640x480 16
Video7 VEGA Deluxe/VGA VEGA640.DRV 640x480 16
GENOA SuperEGA HiRes GENOA528.DRV 640x528 16
Tecmar Graphics Master TGM4N.DRV 720x200 4
CPT 9000 Half Screen CPTHGC.DRV 720x348 1
Hercules Monochrome HGC2.DRV 720x348 1
Tecmar Graphics Master TGM2N.DRV 720x348 1
Tecmar Graphics Master TGM4I.DRV 720x400 4
Tecmar Graphics Master TGM2I.DRV 720x696 1
CPT 900 Full Screen CPTFULL.DRV 720x728 1
Everex Micro Enhancer EVERX752.DRV 752x410 16
GENOA Superega HiRes GENOA752.DRV 752x410 16
QuadEGA Prosync VEGA752.DRV 752x410 16
Video7 VEGA Deluxe/VGA VEGA752.DRV 752x410 16
MDS Genius / AXTEL 530 GENIUS.DRV 768x1008 1
EGA Wonder (ATI) ATI800.DRV 800x560 16
GENOA SuperEGA HiRes GENOA800.DRV 800x600 16
Paradise VGA PVGA800.DRV 800x600 16
Video7 VEGA VGA VEGA800.DRV 800x600 16
Wizard EGA WIZRD800.DRV 800x600 16
GENOA SuperEGA HiRes GENOA912.DRV 912x480 16
Vectrix PEPE VECT768.DRV 1024x768 16
Vectrix PEPE (AT) VECTRXAT.DRV 1024x1024 16
Vectrix PEPE (PC) VECTRXPC.DRV 1024x1024 16
Vectrix PEPE VECT1280.DRV 1280x1024 16
Wyse-700 WYSE700B.DRV 1280x400 2
Wyse-700 WYSE700C.DRV 1280x800 2


Plotter
---------------------------------------------------------------------
APPLE410.DRV (Apple 410)
CALCOMP1.DRV (Calcomp intelligent plotters)
CALCOMP2.DRV (Calcomp non-intelligent plotters)
DXF.DRV (AUTOCAD)
DXY101.DRV (Roland DXY 101)
DXY800.DRV (Roland DXY 800)
GERBER.DRV (Gerber Photo Plotter 2.3 format)
GERBER34.DRV (Gerber Photo Plotter 3.4 format)
HI.DRV (Houston Instruments)
HI29.DRV (Houston Instruments DMP-29)
HP.DRV (HP plotters - HPGL language)
HPX.DRV (HP Compatible plotters)
PSCRIPT.DRV (any PostScript plotter)
WG.DRV (Western Graphtec)

*******************************************************************************


For more information, assistance, or to place an order, please contact
your local OrCAD representative:

WA/OR/MT/ID/AK Seltech 206-746-7970
N.CA/N.NV Elcor Associates 408-980-8868
S.CA Advanced Digital Group 714-897-0319
S.NV/UT/AZ/NM/CO Tusar 602-998-3688
ND/SD/MN/W.WI Comstrand 612-788-9234
NE/KS/IA/MO Walker Engineering 913-888-0089
TX/OK/AR/LA Abcor 713-486-9251
MI/E.WI/IL MacKellar Associates 313-335-4440
IN/OH/KY/WV/W.PA Frank J. Campisano Inc 513-574-7111
TN/NC/SC/VA Tingen Technical Sales 919-870-6670
MS/AL/GA Electro Cadd 404-446-7523
FL High Tech Support Group 813-920-7564
E.PA/NJ/NY/DC/DE/MD Beta Lambda 201-446-1100
CT/RI/MA/VT/NH/ME DGA Associates 617-935-3001

BC/AB/SK/MB Interworld Electronics 604-984-4171
ON/PQ Electralert 416-475-6730

AUSTRALIA Prometheus 3862-3666
AUSTRIA Dahms Elektronik GmbH 316-640-300

BELGUIM IENX 649-9991
DENMARK/NORWAY NordCAD 817-3299
ENGLAND(UK/IRELAND) ARS Microsystems 276-685005
FINLAND Elektrotel OY 754-3122
FRANCE ALS Design 14604-3047
INDIA Hinditron Computers PVT 812-367-289
ISRAEL TICI Software Systems 3-945214
ITALY BRM Italiana 11-771-0636
MicroData System 187-966-123
JAPAN Sotec Company, Ltd. 45-641-0802
KOREA Jeil Precision Co., LTD 785-4181
Youl Systems, Inc. 556-9161
SINGAPORE Micro Ace PTE., LTD 742-8941
SPAIN Next-For S.A. 504-0201
SWEDEN Technology Partners 8-156815
Translogic 046-291-350
SWITZERLAND Logmatic AG 5683-3838
TAIWAN Molecatex INC. 2-741-0400
Leesel International 2-708-8690
WEST GERMANY Compware, GmbH 40-818-074
Ferrari Electronic GmbH 30-396-5021
Hoschar Systemelektronik 721-374-338
InfraTech 40-81-7578

or contact:

OrCAD Systems Corporation
1049 SW Baseline St Suite 500
Hillsboro, OR 97123

(503) 640-9488 (SALES & ADMINISTRATION)
(503) 640-5007 (TECHNICAL SUPPORT)


  3 Responses to “Category : Science and Education
Archive   : ORCAD.ZIP
Filename : READ.ME

  1. Very nice! Thank you for this wonderful archive. I wonder why I found it only now. Long live the BBS file archives!

  2. This is so awesome! 😀 I’d be cool if you could download an entire archive of this at once, though.

  3. But one thing that puzzles me is the “mtswslnkmcjklsdlsbdmMICROSOFT” string. There is an article about it here. It is definitely worth a read: http://www.os2museum.com/wp/mtswslnk/