# Category : Science and Education

Archive : CAF23.ZIP

Filename : CAF.DOC

Resident Floating Point Scientific Calculator

by

Bob Eyer

[73230,2620]

Apr 30, 1992

ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ SHAREWARE NOTICE and TERMS ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿

³ ³

³ The content of this archive is shareware: if you think it's a ³

³ worthy addition to your personal software, you might make a ³

³ contribution to the author. In return for your contribution you ³

³ will receive the most recent updates of the items mentioned in the ³

³ list below. ³

³ ³

³ Simply purchase a money order from your bank in the amount of $20 ³

³ US made out to Bob Eyer and send with your return address to: ³

³ ³

³ Bob Eyer ³

³ 1100 Bloor Street West ³

³ Suite 16 ³

³ Toronto, Canada M6H 1M8 ³

³ ³

³ Please mention in your accompanying note whether you wish 5.25" or ³

³ 3.5" diskette format, and state the name in which you wish ³

³ registration-only utilities to be registered. ³

³ ³

³ Do not send checks. Checks cause problems across international ³

³ borders which make them unsuitable for small purchases by mail ³

³ order. Checks will be returned with your order unfilled. ³

³ ³

³ Enquiries may be placed by writing directly to the author via ³

³ Easyplex at Compuserve [73230,2620]. ³

³ ³

³ Warranty and Disclaimer: ³

³ ----------------------- ³

³ The author, Bob Eyer, of this and all items below guarantees the ³

³ physical integrity of the diskette covering the points above, and ³

³ will replace free of charge, if it is received defective. ³

³ However, in no case will the author be responsible for any damages ³

³ due to loss of data or any other reason. In no event does the ³

³ author's liability for any damages exceed the price paid for the ³

³ buyer's order of this software, regardless of the form of the ³

³ claim. The person using the software bears all risk as to the ³

³ quality and performance of the software. ³

³ ³

³ ³

³ DESCRIPTION OF PROGRAMS YOU WILL RECEIVE FOR YOUR CONTRIBUTION ³

³ -------------------------------------------------------------- ³

³ ³

³ The items listed below, except the ones with asterisk in the left ³

³ margin, are registered to you personally. As personally ³

³ registered to you, these particular copies may not be distributed ³

³ without the author's consent. Names of programs falling into this ³

³ category are all versions of MG, versions of SPC after SPC 5.4, ³

³ all versions of HOST, CA, and CAF. These programs may be freely ³

³ circulated only in their 'shareware' form. Versions of these ³

³ programs which are personally registered to the user must not be ³

³ so circulated. When you place an order by making your shareware ³

³ contribution under these terms, you are agreeing to abide by this ³

³ principle. ³

³ ³

³ The asterisked items mentioned below are in fact collections of ³

³ new versions of Eyer utilities, most of the older versions of ³

³ which were posted separately. They have been combined into ³

³ packages in order to simplify processing orders at this end. ³

³ ³

³ MG 3.0 ³

³ ------ ³

³ Moving average ASCII graphing program. Especially designed for ³

³ obtaining graphic updates on stock-market activity in practical ³

³ trading environments, in which it is essential that the user get a ³

³ quick graph immediately, with points of the graph directly ³

³ associated with the numerical and other text information which ³

³ these points represent (a feat impractical in Lotus graphics). ³

³ Designed to be used with SETV in the SUTL package. ³

³ ³

³ SPC 5.5 ³

³ ------- ³

³ Multidrive columnar drive report, with fairly complete description ³

³ of your machine including communications, important chips, ³

³ printer, BIOS, memory, processor and coprocessor speed, ³

³ multitasking, networking, and so on, all in one single snapshot. ³

³ New version doubles the amount of information on each ³

³ communications port and displays the information in columnar mode ³

³ above the drive report, adds an environment usage readout as well ³

³ as a new P parameter to pause the PRINT multiplexer, when it is ³

³ used to feed data to your printer. (DOS PRINT lacks a pause ³

³ command). ³

³ ³

³ HOST 2.3 ³

³ -------- ³

³ Provides a simple BBS host for occasional use. Fully ³

³ configurable, but capable of being run 'right out of the box', ³

³ HOST provides ringback, file transfer, mail, chat, userlog, shell, ³

³ and much more - in an executable only 27K in size. ³

³ ³

³ CA 2.4 ³

³ ------ ³

³ 7-function fixed point TSR calculator with formatted displays and ³

³ scientific notation for direct paste to text. Also has ³

³ accumulator. Four mode groups. About 13K of memory. ³

³ ³

³ CAF 2.3 ³

³ ------- ³

³ Memory resident calculator with formatted displays and direct ³

³ paste to text, with minimum screen overlay. 24 functions, ³

³ including trig, factorials & combinations, mean & standard ³

³ deviation, regression analysis, much more. Six mode groups. CAF ³

³ is the most sophisticated calculator in the business for its ³

³ size. 32K of memory. ³

³ ³

³ * FUTL 2.0 ³

³ -------- ³

³ A collection of file processing utilities including - ³

³ CHG 2.8 - File/directory attribute/date/time reader/changer ³

³ ELIM 2.6 - Replacement for DOS DEL ³

³ FVER 2.1 - BBS file list verifier - automatic, redirectable ³

³ MV 2.8 - File mover, large improvement over MV 2.6. ³

³ MVA 2.1 - BBS file mover, reads from list, uses download path ³

³ OTL 3.0 - Operation to List, generalisation of MVA, for BBSes ³

³ RNF 2.2 - Puts special flags on filenames ³

³ SWP 2.0 - Single level sweep program, faster than SWEEP.COM ³

³ TYME 2.3 - Program execution timer ³

³ WD 2.6 - Applies wildcard to any program ³

³ Each is the best and smallest in the business for what it does. ³

³ ³

³ * SUTL 2.1 ³

³ -------- ³

³ A collection of small utilities covering batch file, diagnostic, ³

³ communications analysis, file, video, and other areas, including ³

³ AL, CFIX, DOSV, DTR, EL, EMS, KALL, LF, PAUZ, PF, PORT, RING, RTS, ³

³ SETV, SS, and TSTF. Includes a number of very useful memory ³

³ resident programs, such as AL(alarm) and PORT(analyser). ³

³ ³

³ * TUTL 2.1 ³

³ -------- ³

³ A collection of text-processing utilities, including ADD, CBRO, ³

³ CITM, COMB, DIV, ESRT, LCNT, REV, and SPLT. Except for LCNT (a ³

³ very fast wildcarded text linecounter), these programs cover ³

³ important ground in text processing for which there exists no ³

³ other alternative in the shareware market. Users who do much ³

³ work with ASCII text should not be without these utilities. ³

³ ³

³ ³

ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ

ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿

³ WARNING: THIS SOFTWARE MAY NOT WORK PROPERLY WITH CERTAIN ³

³ APPLICATIONS. SEE CAUTION BELOW. ³

ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ

Help screen

-----------

Syntax: CAF [/U] Hotkey: Rightshift-/

Binary operations: + - * / ^ C P

Unary operations: SQ SQRT EXP LOG SIN ASN

COS ACS TAN ATN SINH COSH TANH ! X=

Registers: E PI A B C X K M N R S

To quit from following areas, use Esc key -

MEAN REGRESSION

Modes: places COLOR y RAD/DEG

TWO/NAP/TEN STUF/D DMS/NODMS

Review: ST

See the note about Errors below.

Changes since CAF 2.0

---------------------

- Much better input editor, allowing use of Esc key to exit; no

more jerky cursor action.

- Adds MEAN and REGRESSION special areas. ADD now integrated

into MEAN chiefly to save space. New display prompts put

results to the left the prompt.

- C added to binary functions - number of combinations of n things

taken r at a time. The math notation 'nCr' is somewhat modified

as 'a C b'.

- P added to binary functions - number of permutations, same

type of syntax as for combinations.

- ! added to unary functions - the factorial function. As for

all other unary functions, the function name MUST precede its

argument, and be separated by a blank. Thus the math notation

'10!' reads in CAF as '! 10'.

- MEAN area added - enables user to find the total, mean and

standard deviation of a list of numbers. Reserved for

registered users only.

- REGRESSION area added - enables user to find the correlation

coefficient of a series of paired data. Also computes the least

square regression line and other data for this series.

Registered users only.

- New registers for direct readout or paste: K (the y-intercept of

the regression line), M (the slope), N (the number of data in

the supplied scatter of points), R (the correlation

coefficient), S (the standard deviation for the MEAN).

Additional data, including the covariance of listed pairs,

available only in registered versions.

- New storage register X, for saving old results for re-entry into

subsequent calculations.

- Introduces DMS format ('degree-minute-second') for trig

functions. Default is No DMS (NODMS). Where DMS is set, CAF

treats the first two digits following the decimal point of

angles as the number of minutes, and the next four digits as

seconds correct to the nearest hundredth of a second. Only

works when DEG (degree) mode is set, and only on the trig

functions and their inverses.

- The PLACES mode is simplified so that the mere entry of a single

digit number causes CAF to change the number of places.

Formerly, the user had to type 'x PLACES' to get it to recognise

x as the number of places. Entry of the number of places now

affects all displayed numbers, as well as all those which are

pasted to the underlying application. In the MEAN and

REGRESSION areas, however, results are formatted to a minimum of

3 places within those areas unless places is set higher than 3.

If set to 0, results rounded to 3 places in the area windows

will appear to maximum precision on exit from those windows.

- The N/D modes are now changed to STUF/D. The reason is to avoid

conflict with the N register readout for the number of pairs of

data entered in the MEAN and REGRESSION areas.

- Extends to all unary functions the same coverage of register

input as applies to binary functions.

INTRODUCTORY NOTE: CAF is a floating point companion alternative

to CA (see program listing in Shareware Notice above), which is

restricted to four function fixed point arithmetic. CAF supports

24 functions. Registered versions of CA use about 12K of memory;

CAF uses about 32K. This is comparable to some of the simpler

floating point calculators, such as FFC, but, unlike these (which

are usually restricted to the standard four arithmetic functions),

CAF offers far more functionality.

CAF is not a general formula evaluator. If you need to do many

different kinds of calculations on the same text in one shot, it

may be more appropriate to use Lotus 1-2-3 or similar, print

results as a file, edit, and then insert into your text. CAF,

however, does provide a simple means of re-using input data for

subsequent calculations (see section below about Automatic

Store/Recall and also the discussion about register operations).

Also, CAF provides a method of adding many numbers before

injecting the sum to text (See Special Accumulator section below).

CAF's floating point emulator will take advantage of the

coprocessor, if one is installed. This advantage is noticeable

primarily on XT's and slow AT's, and primarily with regard to the

transcendental functions. Except for SQ, all Unary operations and

the power function are directly or indirectly based on infinite

series and/or the use of Newton's Method. The accuracy of this

range of functions is about 12 significant figures, rather than

the usual 15 for ordinary arithmetic.

CAF's real number range, apart from sign, is roughly between

1e-294 and 1.7e+308. This is much larger than is possible in the

companion program CA, and is also larger than the usual range for

many scientific calculators.

IMPORTANT: This program does not provide a menu or picture of a

calculator - so as to avoid obscuring portions of the underlying

editing application, and to avoid requiring the user to employ

only 25 x 80 screens (some TSR calculators require this, to make

use of Line 25 for calculator monitoring). CAF responds equally

well in 50 x 80 or 44 x 132 video environments; generally, it is

indifferent to the manner in which the video raster is defined.

CAF is designed to respond just to the hotkey, which provides

merely a 'calculation window', in which the user enters his

calculations or mode changes. Hitting ENTER after supplying a

calculation or mode change to the window, simply executes the job

and returns to the application. Where a result is generated, it

is pasted directly to the underlying application where the cursor

was last located.

In examples seen below, EACH calculation or mode change is

preceded by invoking the hotkey. This, however, does not apply to

special areas dealing with more complex problems, such as MEAN and

REGRESSION.

CAF is also designed to return the cursor to the initial position

in the main calculation window, to permit making mode adjustments

without line skipping. Once a task is completed, you may exit the

window merely by hitting ENTER one additional time or by using the

spacebar to delete the window. The old window always disappears

in an editing environment after the result is injected to the

text, but mode change information will, in general, remain.

Modes/review

------------

CAF provides 6 groups of mode selections - number of decimal

places to which to round results, colour of calculation window,

whether to use Radian or Degree measure, what base to use for the

EXP and LOG operations, whether to echo the result to display or

paste to text, and whether to use DMS format in trig calculations.

The current mode situation may be viewed simply by entering ST in

the calculation window (ST is short for 'status').

Mode changes are entered directly in the calculation window and

the new mode specs are resummarised in the calculation window,

just as though ST had been issued.

x

Entry of 5 in the calculation window will cause CAF to operate so

as to round all results to five decimal places. Entry of 0 means

that no formatting will occur. The default value is 0.

COLOR y:

Entry of 'COLOR 30' will cause the calculation window to have a

bright yellow foreground and a blue background. For colour

details see below. The default colour scheme is black on white

(112). Color 0 automatically converts to 112, so as to avoid

black on black.

RAD/DEG:

Entry of RAD in the window causes CAF to assume all angles entered

as arguments in trig functions are in radian measure. Entry of

DEG puts CAF into Degree mode. The default is Degree mode.

TWO/NAP/TEN:

CAF supports three bases for use with the LOG or EXP functions.

TWO means Base 2; NAP is short for the Napierian base (2.718 ...)

and means Base e; and TEN means Base 10. The default is Base e.

STUF/D:

STUF means normal (stuff the result to the underlying

application), and D means display (that is, display at TSR video

level). STUF is the default. STUF mode injects results to the

underlying application; display mode echoes results to the screen

without pasting to the application at all.

Register operations

-------------------

CAF supports pasting 11 registers direct to text. For example,

after invoking the hotkey, we simply enter

e [= 2.7182818284590

(the use of the left bracket here merely signifies that the result

appears at the underlying application, not at TSR level)

In addition, the user may simply enter A, B, or C to examine the

last value stored in CAF's "store/recall" facilities (see

below), as well as the general storage register X, and the

statistics registers.

Binary operations

-----------------

CAF supports seven two-variable ('binary') operations: + - * / ^ C

P, or add, subtract, multiply, divide, raise to a power,

combinations and permutations, respectively. For example,

1991-1917 [= 74

7e-6+3e-4 [= 0.000307

3.33e+1+4.56e-3 [= 33.30456

When entering exponentially formatted numbers one must specify a

sign (+ or -) immediately after the 'e' symbol.

Additional examples:

35/34 [= 1.0294117647058

35*34 [= 1190

35^34 [= 3.1500214e+52

10 C 4 [= 210 (210 combinations of 10 things

taken 4 at a time)

Unary operations

----------------

CAF also supports 10 unary transcendental functions, grouped by

inverses, as well as three hyperbolic functions, and the factorial

function. Here, a blank must separate the name of the operation

and the number which the operation takes as its argument.

Examples,

! 6 [= 720 (factorial 6)

SIN 45 [= 0.7071067811865

COS 1 [= 0.9998476951563

LOG 2 [= 0.6931471805599

EXP 1 [= 2.7182818284590

SQRT 2 [= 1.4142135623731

If you wish to use Base 10 logarithms, just enter TEN in the

window, and then

LOG 2 [= 0.3010299956639

Note: the EXP function is in fact an antilog function, since it is

subject to the same range of base changes as is the LOG function.

This may be inconvenient to some users who assume that the

exponential function must always have base e, but implementing a

separate antilog function seemed, in the circumstances, merely to

be useless duplication of what is, essentially, a quite flexible

function.

The internal setup for the hyperbolic functions is the same as for

the trig functions. If you select DEGree mode, CAF will convert

your degree measure into the radian equivalent before calculating

the function. If you select RADian mode, CAF will do no such

conversion, but will inject your argument directly to the

function.

Automatic store/recall

----------------------

If you are doing several calculations which involve use of the

same term, you may reduce typing further by using variables.

Calculation window variables are A, B, and C. The first time

you execute a calculation with numbers, the first number is

always stored into A, the second number into B, and the result

into C. These values can be re-used, simply by employing these

variables in subsequent calculations [except, of course, for the

fact that, as each new calculation is done, the value of C will

be updated with the new result].

Example (after entering 3 in the window):

Suppose we wish to perform the following calculations -

34.21102 x 435, and

34.21102 / 355.5

Here, each calculation uses the same initial term. We proceed

as follows, each time by hitting Rightshift-slash, and entering

the calculation shown:

34.21102 * 435 [= 1.488e+4

a/355.5 [= 9.623e-2

The second calculation above could be repeated merely by entering

a/b

The user may also proceed to obtain results for the other three

operations, using the same numbers, as follows:

a*b [= 12162.018

a+b [= 389.711

a-b [= -321.289

The output C-variable can also be used in calculations. For

example, we may first calculate with no scientific notation

2/3 [= 0.667 ]

Here, A = 2, B = 3, and C is the result in brackets. Now, if we

multiply the result C by 3, we should get back the numerator A:

C * 3 [= 2.000

This example illustrates the fact that CAF, like handheld

calculators with the store/recall function, stores results in a

separate register before rounding. It is this separate register

that is used for input, when the user employs C in a

calculation. [otherwise, the user might get back 2.001].

This type of 'result protection' on use of a previous result is

not, however, found in most TSR calculators.

All these remarks apply also to CAF's trig functions. For

example (using 5 decimal places),

SIN 89 [= 0.99985

We may now get back the value of the argument, simply by

performing the inverse (ARCSINE or ASN) on the result:

ASN C [= 89.00000

The same principle also works with squares and squareroots, as

well as logs and exponentials. For example,

LOG 2 [= 0.69315

but the argument '2' may be had by performing the inverse on the

result:

EXP C [= 2.00000

You may also store a previous input or result into the general

storage register X. Just use, for example,

X= C or X = C

to store the value of C into X. X may be recalled simply by

entering X by itself, or by using it as an argument in any

function.

ADD (special accumulator)

-------------------------

Entry of the keyword ADD in the calculation window, will transfer

control to a special area of CAF, which displays the following

type of prompt:

X>

Numbers entered at this prompt are totalled, each total being

echoed in the left half of the display. If the next number in the

series is the same as the previous number, you may simply enter X

at the prompt; CAF interprets X as the previous value of the

argument entered. The same principle applies where you merely

wish to add the previous total to itself: use C.

Hitting the Esc key finishes the operation, wipes the special

window from the screen (if you're in an editing environment), and

injects the result to the underlying application if CAF is in STUF

mode.

MEAN (Total, Mean and Standard deviation)

-----------------------------------------

Entry of the keyword MEAN in the calculation window will

transfer control to a special area of CAF which displays the

following type of prompt:

X>

Numbers entered at this prompt are totalled and in passing CAF

also computes the mean and standard deviation for all numbers

entered, displaying these results in the stated order to the left

of the prompt.

If the next number in the series is the same as the previous one,

you may simply enter X at the prompt; CAF interprets X in the MEAN

window as the value of the argument last entered. The same

principle applies where the user wishes merely add the previous

total to itself: use the result register C.

The data displayed to the left of the prompt are displayed as

rounded to a minimum of 3 places.

When finished entering data, simply hit the Esc key to paste the

Total to the underlying application. The other data are available

by entering the following variable names:

X - Mean.

S - Standard deviation

N - Number of data entered.

The main result, the total, may be reaccessed by using register C.

For the interest of statistics people, the definition of standard

deviation used in CAF assumes the "n - 1" basis. That is, it is

based on multiplying the the root mean square of the data by the

square root of the ratio of N to N - 1. The purpose of the n-1

basis is to obtain a more realistic value for the standard

deviation in small sample applications than is possible with a

mere variance calculation.

The value of this routine is primarily to obtain quick results on

small amounts of data found directly on the screen in the

underlying application. If you have a large job to do, involving

many points, your best bet is to use a large program such as LOTUS

1-2-3.

MEAN is available only to registered users.

REGRESSION (regression analysis)

--------------------------------

Entry of the keyword REGRESSION in the calculation window will

transfer control to the REGRESSION area of CAF.

Here, the prompt will change between

X>

and

Y>

and CAF will issue a beep to the speaker each time a Y value is

entered. Three running results are displayed to the left of the

prompt: The correlation coefficient, the y-intercept of the

regression line, and the slope of that line. The previous value

of X may be entered at either prompt by using X, and the previous

value of Y may be entered at either prompt by using Y. If you

enter C (the result register) the current correlation coefficient

will be entered at the prompt in question. Avoid, unless you

really want to do that.

But otherwise, operation of the REGRESSION area is similar to

that in MEAN.

On use of Esc to exit, CAF will paste the correlation

coefficient to the underlying application. To paste the

y-intercept, use K; and to paste the slope, use M. The

regression line has the standard form,

Y = K + MX

As usual, N is the number of pairs of data entered in the

REGRESSION window. The correlation coefficient may be obtained by

entering R.

REGRESSION is available only to registered users.

Prompt Colour

-------------

As stated above, to change the colour of the calculation window,

simply enter

COLOR x

in the window, where x is a COLOR number. The default is 112,

which describes black foreground on a white background. 0 is

impossible (black on black), and so CAF converts that number to

112 automatically. Foreground and Background colours may be

determined by using the following table:

Back Fore Bright Fore

---- ---- -----------

Black 0 0 8

Blue 16 1 9

Green 32 2 10

Cyan 48 3 11

Red 64 4 12

Magenta 80 5 13

Brown 96 6 14

White 112 7 15

The correct COLOR number is found merely by adding the Foreground

number to the Background number desired. For example, Bright

Green on Blue background is 10 + 16 = 26.

Avoid setting COLOR above 127. Values above that limit will

produce blinking displays.

In my estimation the COLORs best for the eye are 10, 11, 14, 15,

26, 27, 30, 31, 74, 75, 78, 79 and 112. But you may have other

ideas. Example,

COLOR 75

sets the window to Bright Cyan on a Red background.

Errors

------

CAF supports error reports as follows -

xyz: illegal - This message occurs where your entered

instruction, 'xyz', is not recognised by

CAF. For example, 'TAN89' is illegal;

should be 'TAN 89'.

Read examples in documentation above to

be sure you understand how to enter

expressions.

Illegal X setting - This means that you have tried to save

the value of unsupported register into

X. The supported registers are listed

on the help screen.

Zero divide error - Attempt to divide by zero. This can be

an explicit mistake, like '5 / 0', or it

may be an attempt to calculate the value

of a unary function which divides two

other functions to obtain its result.

For example, the TAN, or Tangent of an

angle, is really the ratio of the Sine

and the Cosine of that angle; but the

Cosine of 90 degrees is zero, so trying

to find the Tangent of 90 will generate

this error.

Negative base error - You tried raising a negative number to a

power (cannot be done on real numbers).

Negative argument error - You tried taking the LOG of a negative

number (cannot be done on real numbers).

Requires registration - This means you are trying to access a

function accessible only to registered

users. (Send in your contribution, and

get full access plus much more!)

CAUTION

-------

Certain types of editors will not work consistently with CAF - in

particular, editors which simulate the Macintosh console

environment, such as the Microsoft DOS 5.0 Editor. Like Microsoft

Windows, these environments do certain tricks with video display -

and, so I understand, certain tricks to redefine one or more

interrupt functions - which lead to machine hangs when CAF and

other similar TSR's are run concurrently with them. (The problem

here is not unique to CAF, as collateral testing of other TSR

calculators has shown). If you're serious about computing, don't

use graphics user interfaces (GUI's)!

Further, like all memory resident programs, CAF is vulnerable to

compatibility problems which may arise from its use with other

TSR's. If you find you must reboot, try removing other memory

resident programs from your AUTOEXEC.BAT file, or try changing the

sequence in which they are loaded until you find the best

combination.

However, tests have shown that CAF is much less vulnerable to

interrupt collisions and other compatibility problems than other

resident floating point calculators.

One category of TSR which is almost guaranteed to cause trouble

for CAF (and for any program which stuffs keystrokes into the

keyboard buffer) are programs like 128KEY.COM, which lengthen or

change the effective size of the keyboard buffer. Don't use such

programs with CAF.

CAF is primarily intended to work with editors and wordprocessors,

and has been tested on Wordperfect 5.0, Galaxy 2.42, Captain

Blackbeard 1.13, SLED 1.1, QEDIT 2.08, pEDIT 2.10, and a number of

other editors/wordprocessors, with no confirmed problem or

abnormality.

CAF is recommended for use as the last memory resident program

loaded, so as to permit the use of the /U commandline option to

unload it from memory, and only in standard text-editing or

wordprocessing applications. Unless you have found that CAF works

with your non-standard application, it is recommended that you

take the precaution of unloading CAF before you invoke such an

application.

----------------------

End of documentation

Very nice! Thank you for this wonderful archive. I wonder why I found it only now. Long live the BBS file archives!

This is so awesome! 😀 I’d be cool if you could download an entire archive of this at once, though.

But one thing that puzzles me is the “mtswslnkmcjklsdlsbdmMICROSOFT” string. There is an article about it here. It is definitely worth a read: http://www.os2museum.com/wp/mtswslnk/