Category : Science and Education
Archive   : AIZ451.ZIP
Filename : BBS.CNF

;
;
;
; SV1AIZ Multiuser Multiport BBS.
; v4.51 (c)1991
; All rights reserved.
; Spiros M. Kavalaris
;
; BBS,GATEWAY configuration file.
;
; Any line starting with a ';' will be
; ignored from the bbs during start up.
; BBS also ignores any blank line.
;
;
;
;
;--- START GENERAL DEFINITIONS ---
;
; You have to declare the full paths on the following directory
; descriptions.
;
C:\AIZBBS\ {BBS directory path}
C:\AIZBBS\MAIL\ {Path for mail}
C:\AIZBBS\FILES\ {Path for up-dnload files}
C:\AIZBBS\BIN\ {Path for bin files}
C:\AIZBBS\HELP\ {Path for help files}
;
; NOPATH if we don't need swap.
;
C:\AIZBBS\SWAP.BBS
;
; Here is the file which contains
; all the necessary informations,for qsy
; operation.
; NOPATH if we don't support QSY.
;
C:\AIZBBS\QSY.TXT
;
; Fwd file.
;
BBS.FWD
;
;
; Specify the printer port (1,2,3).
; (0) to not initialize printer during
; start up.The same procedure is available
; from the sysop window.
;
0
;
; Set the display card to AUTO for autodetection.
; If you have snow or flicker problems with CGA cards
; use COLOR instead of AUTO.It will cause
; a little delay on screen updating routines.
;
AUTO {Display card.Auto,Mono,Color }
;
; Max number of channels,max number of ports.
;
8,2
;
;
SV1AIZ {Our call}
Spiros {our name}
ABCDEFABCDEFAB {Password for remote operation}
Auto host {Put tncs in host mode.(Auto,No Auto)}
;
;
; Login register flag,
; Bulletin hold flag,
; Call validity check flag,
; Checks if a bull we are taking,originated by us and rejects,
; Y to Check the number of digipeaters before accept a connection,
; Keyboard true task,
; Y if ok to Sound bell characters,
; PK232 monitor.Internal.Put Y if u have display problems,
; Sysop available flag,
; Y,if ok to update a log file,
; Log Dnload requests,
; Log Upload requests,
; Log YDnload requests,
; Log YUpload requests,
; Log Kill procedures,
; Log Read procedures,
; Log File erase requests,
; Log YFile erase requests,
; Bid to private mail,
; Binary Fwd Support, (not implemented yet)
; FbbFwd Support,
; SCREEN save timeout,
; Fwd minute,
; Channel timeout in minutes,
; Days to Hold a bulletin as old.'0' to deactivate.
;
N,Y,N,Y,Y,Y,N,N,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,5,17,10,120
;
; Editor's colors
;
; Editor's border color,
; Editor's text color,
; Editor's block color,
; Editor's cmd color.
112,11,48,11
;
;
;
; Max number of calls in jlist,
; Max number of calls in mailbeacon header.
;
6,20
;
;
;

0 5 {Days of the week to do housekeeping.0=Sunday}
;
;
; Hour to do housekeeping.Put 24 or more if you don't need it,
; Minute to do housekeeping
;
6,5
;
; Gates.Upgate,downgate descriptions.Do not remove even if you don't
; support gates.
;
HF
VHF
;
;
;
; ** PORTS **
; 1)QRG of the port.
; 2)Com (0=com1,1=com2,2=com3,3=com4,etc up to 8),Baud rate.
; 3)Tnc type (DRSI,Tnc-2,PK-232,PK-88)
; 4)Broadcast path.(fm SV1AIZ to BBS UI pid F0).I think it explains everything.
; 5)Broadcast info.Each port has its own.
; 6)Max number of connections allowed on this port.(Be carefull),
; Broadcast interval in minutes,
; Attribute of this port.It has to do with monitor frames only.
;
;--- START DEFINE PORTS ---
14.105 MHz
0,4800
Tnc-2
MAIL
$V/B $V-2/G $V-2/N QRV.
4,6,15
;--
144.675 MHz
1,9600
Tnc-2
MAIL
$V/B $V-2/G $V-2/N QRV.
4,6,7
;--- END OF PORTS ---
;
; ** CHANNELS **
; In this topic,we have to define each channel which we have declared in the
; beginning of this cnf file.We have 8 channels total,as we have wrote.
; So,we must describe 8 different channels.Description for channel 0 is
; always presented here.Channel 0 will always be a monitor channel for
; all these tncs you have defined.DO not remove.You can add (up to 24) more
; channels or remove.But you have to change the max number of channels in
; the beginning of this file.Be carefull.You better put an ';' in these
; channels you don't need,to avoid rewriting later.
; PK232's first channel is channel 0 not 1 as on tnc2 or drsi.
; So if we use pk232,after monitor's description,we have to define the first
; channel as 0.If use 1 as the 1st pk's channel,the first connection which
; will direct on pk's 0 channel,will never serve any user.
;
;
;
;--- START DEFINE CHANNELS ---
;
; Monitor channel.
;
; Channel,Paclen,Maxframe,Call,VduBuf.
;
0,80,1,SV1AIZ,25
;--
; Logical channels start here.
;
; Channel,Port,Attribute,Paclen,Maxframe,Streamcall,VduBuf,FwdOnly flag,
; Gateway flag,User limited access flag,Number of digipeaters to accept conn.
;
;
1,0,15,80,2,SV1AIZ,25,N,N,N,4
;--
2,0,15,80,2,SV1AIZ,25,N,N,N,4
;--
3,0,15,80,2,SV1AIZ-2,25,N,G,N,4
;--
4,0,15,80,2,SV1AIZ-1,25,N,N,N,4
;--
1,1,15,254,4,SV1AIZ,25,N,N,N,4
;--
2,1,15,254,4,SV1AIZ,25,N,N,N,4
;--
3,1,15,254,4,SV1AIZ-2,25,N,G,N,4
;--
4,1,15,254,4,SV1AIZ,25,N,N,N,4
;
;--- END OF CHANNELS ---
;
; Sysop's window attribute,
; Sysop's vdu shadow buffer in lines,
; Command line attribute.
;
15,35,112
;
;
; ** SERVERS **
; You may have up to 9 different server descriptions.
; Each server requires 4 descriptions.
;
; 1)Server address.
; 2)Text Filename to create.
; 3)Text Filename to read after server's process.
; 4)Server's filename to run,with command line parameters if required.
;
; The whole server topic begins and ends with at least 2 dashes.
;
--- START DEFINE SERVERS ----
REQINF
REQINF.IN
REQINF.OUT
REQINF.EXE SV1AIZ C:\AIZBBS\ FILES\ BIN\
REQFIL
REQFIL.IN
REQFIL.OUT
REQFIL.EXE SV1AIZ C:\AIZBBS\FILES\
REQDIR
REQINF.IN
REQINF.OUT
REQINF.EXE SV1AIZ C:\AIZBBS\ FILES\ BIN\
--- END OF SERVERS ---
;
; ** GENERAL MESSAGES **
; There are msgs below for each type of user.
; You may change them,put wildcards etc.
; Each decleration included between 2 dashes.
;
--
Welcome to $V BBS channel $E !
Pse Type N (Your firstname)
NZ (Your zipcode)
M (Your homebbs)
to become a registered user.

-- {New user msg.255 characters max in length}
Welcome to $V BBS channel $E !

Hello $N !!

-- {Regular user.255 characters maximum in length}
Hello $N !! (?Q for Qsy details)
-- {Bbs and expert user msg.Line length}
BBS CMDS:A,B,C,D,H,I,J,K,L,M,N,O,R,S,T,U,V,W,X,Y >
-- {Prompt msg.Line length}
BBS CMDS:B,H,N,NZ,M,KM,LM,RM,S,T >
-- {Short prompt.Line length}
$V BBS>
-- {Xpert user prompt}
Enter cmd: B,JA,JB,X,C,N or Help >
-- {Gateway prompt}
Nodes : J41VAA/V (TheNet), ATH/V (KANODE)
-- {Nodes}
Bye $N !
-- {Log off msg}
Timeout..
-- {Timeout msg}
R:$D/$Tz $C@$V.#PIRE.GRC.EU - HF/VHF [$v]
-- {Fwd header}
Lst Msg# $L Mail for:
-- {mailbeacon text}
14
-- {Mailbeacon interval}
Wait while $S is paged.
-- {Sysop available msg}
$S is not available
-- {Sysop not available msg}
Pse std by $N,$S would like to talk to you.
-- {Sysop's response if available}
$S did not answer.
-- {Sysop timeout msg}
;
;
; No wildcards allowed on the following msgs.
;
;
;
Msg# TS Size To At(@) From Date/Time Subject
Call Name TBL Ct Zip LastLogin HomeBBS
** Not Found.
** Not Enough Parameters.
** Invalid Command.
** Invalid Parameters.
** There is a file with that name.
** File not found.
** No files found.
Subject ?
** I already have this Bid..
** You are not allowed to use Bids.
** Aborted.
** Directory already exists.
** Pse send the file. Finish by typing Ctrl-Z.
File has been stored.
** You are not authorized to do this.
** You are not authorized to kill that msg.
** Your messages have been erased..
** You are not authorized to read that msg.
** You cannot use this channel.
** You have to use C .
** You cannot talk to yourself.
** No usage.
** You have to use M .
** Invalid BBS call.
** You have been changed to an expert user.
** You have been changed back to normal user.
** You are not an official user.
You have unread mail.
You have unread mail.Type RM to read it.
;
** Cannot attach this port.
has been erased.
Max available memory :
** Not while forwarding.
Fwd file has been changed to :
** Path not found.
** You have entered the round table.
** Fwd minute =
** Fwd minute has been changed to
** Channel timeout =
** Channel timeout has been changed to
** Insert usercall.
** Insert username.
** Insert usertype.
** Insert Home BBS.
** Ok with Bids ? (Y/N).
** Ok with BidLevel 1 ? (Y/N).
has been registered.
** No memory available.
** You are back in BBS mode.
;
** No help available for
** No infos supported.
** You are not a remote sysop.
** Remote Sysop Verification :
** You are not an official user.
** Pse type N .
If no @ BBS field,you will get your msgs at
#Fwd Started.
Ctr-ZQ to quit ,Ctrl-ZH for help.
** Asking chat request to
.Pse wait.
** Hello ,
** Pse ,use M cmd to specify your Home BBS.
** Round Table Users :
** There is noone in the table.
** Ok ,Join the table.
** Chat request from
** Accept ? (Y/N).
Denied.
** Ok ,your request has been accepted.
** Invalid Bid length.
Enter text for
.Finish by typing Ctrl-Z or /EX.
The following files are available :
has been stored.
** This Msg will be held for Sysop's review.
** BBS only port,sorry.
** You are not allowed to use this port.
** You have not entered your Name.Use N your firstname.
** You have not entered your Zip code.Use NZ ur zipcode.
** You have not entered your Home bbs.Use M your home bbs.
;
; BBS sends cmds to the tncs according port definitions.
; Each group included between 2 dashes.
;
; Drsi start up cmds.
;--
;P0 1 64 10 4 1 10 100 18000 50 4
;--
;P1 1 64 10 4 1 10 100 18000 50 4
;--
;
;
; TNC2 start up cmds.
;
--
A0
E0
MIUSC
N15
W5
U 0
O2
F3
T50
P64
R1
K0
--
A0
E0
MIUSC
N15
W5
U 0
O4
F3
T50
P64
R1
K0
--
;
; PK232 start up cmds.
;
;--
;MLSV1AIZ
;MN6
;MC6
;AA0
;AIN
;AP0
;FL0
;FR2
;ILN
;PL0
;CH00
;PLN
;MIO
;ECN
;NEN
;TFN
;ST00
;SO00
;RLN
;VHON
;HB1200
;TD50
;8BY
;DW4
;--