Dec 092017
 
Good DOS .GIF viewer that includes slide-show.
File PSHOW20.ZIP from The Programmer’s Corner in
Category Printer + Display Graphics
Good DOS .GIF viewer that includes slide-show.
File Name File Size Zip Size Zip Type
FILES.SHW 814 24 deflated
PSHOW.DOC 5556 2512 deflated
PSHOW.EXE 148134 70789 deflated
REGISTER.FRM 2307 824 deflated
TEST.GIF 13111 13023 deflated

Download File PSHOW20.ZIP Here

Contents of the PSHOW.DOC file



PEEPSHOW Ver 2.0
----------------

PEEPSHOW is SHAREWARE for IBM PC and compatibles. It is user supported
and available for a 15 day trial period after which you are required to
register. You can license your copy of the program for use on one
machine by sending $20 + $2 (p&h) in US currency to:

PEEPWORKS
9 Myrtle St #5
Boston, MA 02114-4121

PEEPSHOW is copyrighted software and my not be changed or modified in
any way except by the author. PEEPSHOW is shareware and may be freely
distributed as long as it remain in its complete form with all
documentation files. If you plan to use this program for more than 10
days you may license it as follows.

1 - 10 copies $20 each
Site License $99

All prices are subject to change without notice.

As a registered user, you will be entitled to:

* Free technical support (no collect calls please).
* 1 free upgrade (when you send a stamped disk mailer).


THE AUTHOR OF THIS PROGRAM SHALL NOT BE LIABLE FOR ANY DIRECT, INDIRECT,
CONSEQUENTIAL, OR INCIDENTAL DAMAGES ARISING OUT OF THE USE OF INABILITY
TO USE THIS PRODUCT EVEN IF THE AUTHOR HAS BEEN ADVISED OF THE POSSIBILITY
OF SUCH DAMAGES OR CLAIM.

This means if something happens to your computer while you are using
PEEPSHOW, don't blame us.

No more than $5 (FIVE) US dollars may be charged for redistribution of this
program and under NO CIRCUMSTANCES may a REGISTERED VERSION be redistributed.

PeepWorks will only return calls to REGISTERED users.

It is not recommended that the SHARE utility is used with PeepShow. It may
cause unpredictable results.

GIF is copyrighted by Compuserve Inc.
PCX is copyrighted by ZSOFT Inc.
TIF is copyrighted by Aldus Inc.
FLI is copyrighted by AutoDesk Inc.

PEEPSHOW
--------
PEEPSHOW is a picture viewer/slideshow for IBM compatibles with VESA
compatible SVGA cards. GIF, PCX, TGA, TIF, and FLI picture file formats
are supported. PEEPSHOW will use available DOS memory, EMS, and XMS memory.
However, the program was designed for 386 computers and SVGA cards with at
least 512K memory. Therefor, HIMEM.SYS, EMM386.SYS or QEMM386.SYS should
be installed and 4 MEGS of EMS/XMS ram should be available, but two
should work ok just fine.

This program will work on most SVGA VESA compatible boards. Almost every
SVGA board out there comes with a VESA compatible driver (i.e. SVGA.COM or
SVGA.EXE on your SVGA driver disk), so if your's doesn't, you might want
to get a new SVGA card.

For those of you who have the newer versions of Paradise, Trident, and other
cards (especially the newer windows accelerator cards) are recommended to
use the VESA.COM or VESA.EXE files as some of these cards have changes that
may have unpredictable results on your SVGA card. The VESA drivers usually
take up less than 10k (which usually can be loaded high) so try and use it
if you can.


INSTRUCTIONS
------------
If you haven't figured out how to use PEEPSHOW yet, it's pretty simple.
There are only 9-10 keys you will ever need to use.

From the window/box you may view a picture at any time simply by pressing
[ENTER] or [Space bar]. You can move around to any directory by selecting it
(a name with a for example). To add the picture the cursor is currently
on, press F9 and it will be added to the current list.
Press F10 and you will be at the slideshow menu.

From the slideshow menu you may select the current picture by pressing '1'.
Then enter the line where you wish to place it. The picture on that line
will be overwritten.

Remove a picture by pressing '2', and entering it's line number.
Entering '3' will start the show.
Enter '4' to change the delay rate.
Enter '5' to clear the current list.
Enter '6' to toggle the fade option.
Enter '7' to load a new set of files.
Enter '8' to save the current list of files.

F1 - Toggle graphics mode to 300x200x256.
F7/F8 - Change current SVGA mode.
F9/F10 - Brighten/Darken picture.

As you can see the program is very simplistic and hopefully you will grow
fond of it and register.

Any suggestions on how to improve the program are greatly appreciated.

PLEASE REGISTER THIS SOFTWARE
Thankyou.

PeepWorks


Updates
-------

Ver 1.4
-------
Added FLI file format (320x200x256 mode only).
Fixed misc. memory allocation probs.

Ver 1.5
-------
Added save to .TIF greyscale format.
Fixed .TGA problems color and greyscale.
Fixed color problem in picture menu.
Fixed save lockup problem that occurred occasionally.
Added mouse support.
New Slideshow interface.
Added saving/loading of different slideshows (.SHW files).
Fixed size problem in Video Seven mode 720x540.
Added autodetect mode to size of picture.
Allow for reading of GIF 89a files - no support for 89a files though.
Allows for 100 pictures per list in registered version.
---------------------------------------------------------------------------

Ver 1.5a
--------
Fixed TGA problems.

Ver 2.0
-------
Added:
Command line options to read .SHW files and execute.
Various keys.
Spawn to DOS option.
Drive change option.
Better error support.
Delay options for each picture.
View pictures from slideshow list.
Added mouse support.
Added Alt-F9 to add all files in current directory to slideshow.





 December 9, 2017  Add comments

Leave a Reply