Category : Printer + Display Graphics
Archive   : GIFLST11.ZIP
Filename : GIFLIST.HLP

ProWindows(tm) Professional - (c) Copyright 1988-1991 DSE Software Publishing ‹Î…ç'
c
*B ®ûC}UTo(22$@No Helpˆoñ 9Sorry, No Help Is Available. œUTo“>6>@
ÿMain Menu Helpÿˆo1  >1. Catalog GIF Disk ,Use this menu item to catalog a new disk. You may
also change the default disk drive from here. How- ever this does not make the change to the GIF.CFG. C2. Delete GIF Volume +If you change files on a disk that you already have cataloged then you need to delete these files and volume from your catalog before you can re-catalog
it. This does not harm the files on your disk in any way, it only deletes the files & volume from the catalog so you may re-catalog it again. J3. View GIF Catalog ,You may view catalog or volumes from this menu item. }4. Print GIF Catalog +Here you can print out your catalog to paper. This lets you see at a glance if you already have a file before you waste time downloading a duplicate file. B5. Setup Utilities -This is where you enter your default drive, printer codes, & picture file type. The program comes with the defaults set up for reading drive B: and printer codes for Panasonic KX-P1123 or Epson LQ-850. Check your owners manual for your printer codes if diff-
erent then the defaults. Also, you may choose from the different picture file formats to catalog. The program will only list from the one you choose.
After you have finished entering your defaults, save the configuration to the GIF.CFG file from which the program looks for each time it is run. != * = ØA
MMVë@

ÿCatalog GIFÿˆM~ˆJ~ˆJ~ˆáˆxFˆJxˆJxˆJxˆJxˆJxˆJxˆJxˆJxˆJxˆJxˆJxˆJx M1. Add or update gif catalog.: -2. Change default disk drive.: -3. Exit back to the main menu: ÃÚÄE¿ ³ E³ ³ E³ ³ E³ ³ E³ ³ E³ ³ E³ ³ E³ ³ E³ ³ E³ ³ E³ ³ E³ ÀÄEÙ UTo>>@
ÿCatalog HelpÿˆoÁ >You may add or update only disks which are not in the catalog! If volume "XYZ111" exists and you have add- ed or changed some files, then you need to delete that volume from the catalog before you can re-catalog it. The program will not let you catalog a volume that is already cataloged. fYou may change the default drive for reading disks, however, this change is not saved to the .CFG file and the next time you run the program, the default drive you saved from the Setup Utilities menu will be used. öQo**@
ÿChange Driveÿˆoy )Drive:\Path => BUTo  4 4œ@
ÿChange Drive Helpÿˆo_
 4Enter the Drive you will use to read your files and the path to them. Exp: B:\PIC\ -  or right mouse button exits - accepts hòAA_“@
ÿView GIF Catalogÿxˆx<ˆ>xˆ>xˆ>xˆ>xˆ>xˆ>xˆ>xˆ>xˆ>xˆ>xˆ>xˆ>xˆ>xˆ>xˆ>xˆ>xˆ>xˆA ÚÄ;¿ ³ ;³ ³ ;³ ³ ;³ ³ ;³ ³ ;³ ³ ;³ ³ ;³ ³ ;³ ³ ;³ ³ ;³ ³ ;³ ³ ;³ ³ ;³ ³ ;³ ³ ;³ ³ ;³ ÀÄ;Ù AUToIHHE@
ÿView GIF Helpÿˆoí HSelect catalog to view your catalog. Press any key to continue the file listing. The listing gives you the filename, number of bytes in thousands (k), and the volume (disk) that it is on. The bottom of the screen shows you the # of volumes, # of files, and # total bytes of files in millions (M) along with the day, date, and time of day. vSelecting volumes will give you a listing of all the volumes in your catalog. Use this feature to see if you have cataloged all of your disks. ~ or right mouse button exits. key moves selector. f
&>>Ãc
@
ÿPrint GIF Catalogÿˆ?ˆxˆˆxˆˆtxˆxˆˆtxˆxˆxˆˆxˆˆxˆxˆ{ˆ{ˆ xˆxˆxˆˆxˆ
ˆ{xˆxˆxˆxˆˆxˆˆxˆˆq~~~ˆqxˆxˆˆqxˆxˆxˆ" >ÚÄ¿ ÚÄ¿ ³ Select Print Mode =>> ³ ³ ³ ³ / ³ Àľ ÀÄÙ ÚÄ¿ ÚÄ¿ ³ ³ ³ * Comments available ³ ÀÄÙ ³ on registered copy ³ ÚÄ¿ ³ Send for it today! ³ ³ ³ ÀÄÙ ÀÄÙ ÚÄ¿ ÚÄ¿ ³ Press To Cancel ³ ³ ³ ³ / ³ ÀÄÙ ÀÄÙ "UToû
HH÷
@
ÿPrint HelpÿˆoÕ HSelecting a print mode with the key or arrows will print out a listing to your printer. If it doesn't print right - check out the default printer codes in the Setup Utilities menu from the main menu. You must place your printer codes there. OIf you have the Shareware version, then the only mode available to you is the [4 Column Listing]. Comments are also not avail- able in this version. Send for your Registered Version TODAY! N or right mouse button exits. õ

MMi¡@
ÿDelete VolumeÿˆxHˆJxˆJxˆJxˆJxˆJxˆJxˆJxˆJxˆJxˆJxˆJxˆJxˆJxˆJxˆJxˆxHˆ~ˆExˆJx ÚÄG¿ ³ G³ ³ G³ ³ G³ ³ G³ ³ G³ ³ G³ ³ G³ ³ G³ ³ G³ ³ G³ ³ G³ ³ G³ ³ G³ ³ G³ ÀÄGÙ ÚÄG¿ ³ Volume: ?³ ÀÄGÙ UTo>>@

ÿDelete HelpÿˆoÁ >Here is where you can delete a volume from your cat- alog. You need to do this if you have added or del- eted any files on that volume or before you change
the volume name to another volume name. After you
have deleted the volume from your catalog you can then re-catalog the same volume again and add it to your catalog in it's new form. _Type volume name and press , press  again to delete volume. aMouse or key moves selector. or right
mouse key exits. = * = gHH™
Î@
ÿProgram Set Upÿˆ"ˆ!ˆˆˆˆ$ˆ!ˆˆ
ˆˆˆˆˆˆˆˆ ˆˆˆ
ˆˆˆˆˆˆ
ˆˆˆˆˆˆ
ˆˆˆˆˆˆˆˆˆˆˆˆˆ ˆˆ ˆ
ˆˆBˆˆˆ ˆˆBˆˆ<ˆˆAˆˆ3ˆˆ "ÚÄ ¿ Default Drive And Path To Read: ³ ³ $ÀÄ Ù ÚÄ ¿ Printer Codes: Files to Catalog: ³ 1. ³ Í ÚÄ
¿ Enter Choice * ³ 2. ³ 10 Pt 80 Width: ³
³ ÚÄ¿ * ³ 3. ³ 12 Pt 96 Width: ³
³ ³ ³ * ³ 4. ³ 17 Pt 137 Width: ³
³ ÀÄÙ * ³ 5. ³ Í ÀÄ
Ù *Only Available * ³ 6. ³ ÚÄ¿ On Registered * ³ 7. ³ ³ ³ Version. ÀÄ Ù ÀÄÙ ÚÄA¿ ³ GIFLIST Ver #1.1 - (c) 1992 - Bob Lavine - S H A R E W A R E ³ ÀÄAÙ See GIFLIST .DOC for more information on what is available
on the Registered Version. Please fill out COMMENT.DOC and
return, even if you don't register your copy. for Help UToBB@
ÿSetup Helpÿˆo
 BSelect drive and path to read: B:\PICS\ The program places the "*.GIF" after your entry. PPrinter codes: 210 Pt is Normal print 80 columns wide. 12 Pt is Elite print 96 columns wide. 17 Pt is Condensed print 137 columns wide. Make sure that you put a space inbetween each 2 number
sets. If only 1 number set no space is needed. Number set is the 2 byte printer code such as: 27 [Esc] IChoose type of picture files to catalog. or arrow keys or mouse. file - / exits. …