Dec 102017
 
GC-PREVUE is a photoplotter/penplotter data viewer. GC-PREVUE lets you graphically inspect Gerber, HPGL, and Emma plotter data, as well as Excellon and Sieb & Meyer drill and rout data.
File GCPREVUE.ZIP from The Programmer’s Corner in
Category Printer + Display Graphics
GC-PREVUE is a photoplotter/penplotter data viewer. GC-PREVUE lets you graphically inspect Gerber, HPGL, and Emma plotter data, as well as Excellon and Sieb & Meyer drill and rout data.
File Name File Size Zip Size Zip Type
MAKEPVU.EXE 356054 353430 deflated
README.BAT 26 26 stored
README.DOC 4523 1605 deflated

Download File GCPREVUE.ZIP Here

Contents of the README.BAT file


type a:readme.doc | more


Contents of the README.DOC file


type a:readme.doc | more













GraphiCode GC-PREVUE Shareware

GC-PREVUE is a photoplotter/penplotter data viewer. GC-PREVUE
lets you graphically inspect Gerber, HPGL, and Emma plotter data,
as well as Excellon and Sieb & Meyer drill and rout data.

GC-PREVUE also makes Checkplots on Postscript and HPGL compatible
printers and plotters.

This disk should contain the following contents:

README.DOC
README.BAT
MAKEPVU.EXE

MAKEPVU.EXE is a PKSFX self extracting file.

When you run MAKEPVUE.EXE, the following files will be
automatically extracted from the MAKEPVU executable, and will be
copied onto your disk.

GCPREVUE.EXE DEMO.APR DEMODAT1.GBR DEMODAT2.GBR
DEMODAT3.NC DEMO.RCK GERBER.PDF NCDRILL.PDF
NCROUTE.PDF QUEST.PDF EMMA80.PDF APER.EXE
HAPPY.CAP HAPPY.CAT THERMRD.CAT THERMSQ.CAT
OCTAGON.CAT MOIRERD.CAT MOIRESQ.CAT QUAD.CAT
DQUAD.CAT OVAL.CAT CROSSHR.CAT ANNULRD.CAT
ANNULSQ.CAT TRIANGLE.CAP TUTORIAL.BAT TUTORIAL.DOC
DEMO.KEY DEFAULT.PED DEMO.PED GERBER.DOC
GCPREVUE.DOC TUTORIAL.PED DEMO2.KEY

GCPREVUE.EXE is the main program.

The other files are supporting files including:

TUTORIAL.DOC - GCPREVUE Tutorial Document
TUTORIAL.BAT - GCPREVUE Automated Tutorial Demonstration
GERBER.DOC - Gerber and Photoplotting Tutorial
GCPREVUE.DOC - ASCII text file of GCPREVUE Manual
APER.EXE - Custom Aperture Editor

After running MAKEPVU, type TUTORIAL to start a self running
demonstration of GCPREVUE. For additional assistance with the
demonstration, print out TUTORIAL.DOC and follow along with the
demonstration.














Shareware License Statement

GraphiCode, Inc. grants you, the possessor of a GC-PREVUE program
diskette, the right to make copies of this GC-PREVUE diskette,
and to distribute copies of this diskette with the following
restrictions and requirements:

You must distribute ALL the GC-PREVUE files on this diskette at
the same time. This diskette contains the files MAKEPVU.EXE and
a README file that includes this License Statement.

You may put the GC-PREVUE files on this diskette on a network or
BBS as long as the contents are unchanged.

You may distribute the GC-PREVUE files ONLY in the compressed
form in which you received them on this diskette.

You may NOT distribute the files that load onto your hard drive
as a result of running the MAKEPVU.EXE decompression program.

You must NOT modify any GC-PREVUE files or add any files to the
diskette you distribute.

You may sell copies of this GC-PREVUE diskette, but only at a
price that does not exceed the cost of reproduction and
distribution. If you advertise any GC-PREVUE diskettes, you must
identify "GC-PREVUE" as a trademark of GraphiCode, Inc.

You must NOT copy or distribute printed copies of the on-disk GC-
PREVUE manual, or the printed GC-PREVUE manual published by
GraphiCode, or any portion of those printed manuals.

GC-PREVUE is the only GraphiCode product distributed as
"shareware". You may NOT make copies of other GraphiCode
software.

You don't need to notify GraphiCode when you distribute copies of
GC-PREVUE according to these rules.

For user support call GraphiCode Technical Support at (206) 771-
5600 or call our technical support BBS at (206) 771- 6980. To
order printed copies of the GC-PREVUE user manual, or for more
information about GraphiCode products, contact us at (206)-672-
1980. Our fax number is (206) 672-2705.
Our address is:
19101 36th Avenue West, Suite 204
Lynnwood WA 98036
USA


GC-PREVUE programs and manual are Copyright (C) 1987-1991
GraphiCode, Inc. GraphiCode, GC-, and GC-PREVUE are
trademarks of GraphiCode, Inc.









 December 10, 2017  Add comments

Leave a Reply