Dec 102017
 
DANCAD3D, CAD-CAE-CAM, Wire frame animation, and drawing program. Part 5 of 5.
File DANCAD5.ZIP from The Programmer’s Corner in
Category Printer + Display Graphics
DANCAD3D, CAD-CAE-CAM, Wire frame animation, and drawing program. Part 5 of 5.
File Name File Size Zip Size Zip Type
11X14.JET 434 139 deflated
11X17.JET 434 140 deflated
150D8X11.JET 459 138 deflated
150D8X14.JET 459 139 deflated
150DEXEC.JET 459 142 deflated
150D_A4.JET 464 143 deflated
16X20.JET 434 133 deflated
300D8X11.JET 459 138 deflated
300D8X14.JET 459 137 deflated
300DEXEC.JET 459 145 deflated
300D_A4.JET 464 143 deflated
ADOBE_PS.LZR 853 217 deflated
AMPLOTII.PLT 633 301 deflated
BASIC.PLT 505 162 deflated
COMREX.PLT 373 112 deflated
CPA_80.PRN 240 77 deflated
DANCAD3D.063 2560 1245 deflated
DANCAD3D.064 5888 2501 deflated
DANCAD3D.065 7680 3684 deflated
DANCAD3D.067 1280 521 deflated
DANCAD3D.068 4864 2180 deflated
DANCAD3D.069 4096 1670 deflated
DANCAD3D.073 3072 1619 deflated
DANCAD3D.075 34560 14143 deflated
DANCAD3D.808 3584 1160 deflated
DANCAD3D.814 3584 1259 deflated
DANCAD3D.FON 22400 7675 deflated
DANCAD3D.MSG 1589 726 deflated
DISK5OF5.DOC 1511 767 deflated
DMPL.PLT 428 120 deflated
DXF.PLT 744 166 deflated
DXY_101.PLT 623 296 deflated
DXY_800.PLT 613 293 deflated
FIRST.LZR 1053 257 deflated
FP_215.PLT 353 104 deflated
FX286E13.PRN 230 74 deflated
FX286E8.PRN 491 271 deflated
HI_80.PLT 372 111 deflated
HOOKUP1.2D 189576 48053 deflated
HP7470A.PLT 473 131 deflated
HP7470AF.PLT 709 320 deflated
HP7570A0.PLT 468 128 deflated
HP7570A5.PLT 0 0 stored
HPGL.PLT 473 131 deflated
HPLJPLUS.JET 434 130 deflated
IBM5152.PRN 255 78 deflated
INSTALL.BAT 3771 1024 deflated
IP_500.PLT 448 124 deflated
KXP1091I.PRN 496 274 deflated
LABEL3D5.TXT 399 254 deflated
LASERPS1.LZR 853 215 deflated
LASERPS2.LZR 853 217 deflated
LASERPS3.LZR 853 217 deflated
LASERPS4.LZR 858 217 deflated
LASERPS5.LZR 858 218 deflated
LAST.LZR 738 196 deflated
LINOTYPE.LZR 853 218 deflated
LJIII811.PLT 617 179 deflated
LJIII814.PLT 617 180 deflated
LJIIIA4.PLT 617 180 deflated
LJIIIFIR.PLT 567 164 deflated
LJIIILAS.PLT 382 120 deflated
LJIIIMID.PLT 332 106 deflated
LQ_1500.PRN 496 271 deflated
LQ_1500W.PRN 220 71 deflated
MIDDLE.LZR 718 189 deflated
MX_80.PRN 501 272 deflated
NEC_P6.PRN 496 271 deflated
PASCAL.PLT 781 373 deflated
PIXY3.PLT 348 96 deflated
PROPRINT.PRN 491 271 deflated
README.BAT 2772 1231 deflated
SCM_D200.PRN 461 266 deflated
SP1200AI.PRN 258 80 deflated
STARG15X.PRN 461 271 deflated
SWEET_P.PLT 373 112 deflated

Download File DANCAD5.ZIP Here

Contents of the README.BAT file


ECHO OFF
CLS
REM Copyright (c) 1986 - 1991 by Daniel H. Hudgins, All Rights Reserved
REM File README.BAT for use with DANCAD3D.COM v2.5H

ECHO DANCAD3D by Daniel H. Hudgins, 466 Diamond St., San Francisco, CA 94114, U.S.A.
ECHO .
ECHO To use DANCAD3D v2.5 you need this hardware:
ECHO * 512KB to 640KB DOS memory, 400KB or more of it as free memory.
ECHO * A CGA, Color Graphics Adapter video board or
ECHO * A EGA, Enhanced color Graphics Adapter video board or
ECHO * A Hercules (tm), Monochrome Graphics Card type video board.
ECHO * A Hard-Disk or RAM disk with more than 2MB of free disk space.
ECHO * DOS 2.1 or higher and a fully IBM compatible computer.
ECHO .
ECHO Make a back-up copy of these five 360KB disks or three 720KB disks.
ECHO Enter COPY A:*.* B: with the blank formatted disk in drive B:
ECHO and one of the five DANCAD3D disks in the A: drive.
ECHO .
ECHO To print the DANCAD3D.DOC information file:
ECHO Put the disk number four (4 of 5) in drive A:, then enter A:, then
ECHO PRINTDOC DANCAD3D.DOC LPT1 (For the parallel printer port.)
ECHO or
ECHO PRINTDOC DANCAD3D.DOC COM1 (Use DOS MODE to set up the serial printer port.)
ECHO .
ECHO The DANCAD3D.DOC has information to get you started using DANCAD3D.
ECHO .
ECHO .
PAUSE

CLS
ECHO To install DANCAD3D on your HARDDISK enter INSTALL A C, where C is the
ECHO letter for your harddisk and A is the letter for the floppy drive you will
ECHO be putting the DANCAD3D disks in, or INSTALL B C if you need to use floppy
ECHO drive B. You can use Harddisk D in place of C if you want to also.
ECHO .
ECHO To run one of the demos that are on the disk enter DEMO1 after you install
ECHO DANCAD3D on your harddisk. There are other example MACRO files on the set of
ECHO disks that come with the manuals. They include some that show you how to
ECHO animate a robot, some mechanical simulations, and a macro that demonstrates
ECHO DANCAD3D v2.5's ability to animate mathematical formulas.
ECHO .
ECHO Enter DANCAD3D to start the program. Press [T]utor from its main menu to
ECHO read some help screens. Press [D]raw from the main menu to draw. When you
ECHO run the program for the first time it will ask you for the video mode you want
ECHO it to use. If you do not know what type of video board you have read the
ECHO instruction book that came with your computer. Be sure and read the
ECHO disclaimer in the file DANCAD3D.DOC before you run the program.
ECHO .
ECHO .
PAUSE

CLS
TYPE DISK5OF5.DOC
PAUSE

CLS
ECHO .
ECHO Enter DEMO1 to see the demo run. To run DANCAD3D when you turn your
ECHO computer on again enter CD DC25 then enter DANCAD3D.
ECHO .



 December 10, 2017  Add comments

 Leave a Reply

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>

(required)

(required)