Dec 092017
 
DANCAD3D, CAD-CAE-CAM, Wire frame animation, and drawing program. Part 3 of 5.
File DANCAD3.ZIP from The Programmer’s Corner in
Category Printer + Display Graphics
DANCAD3D, CAD-CAE-CAM, Wire frame animation, and drawing program. Part 3 of 5.
File Name File Size Zip Size Zip Type
COLORTST.MAC 841 286 deflated
DANCAD3D.003 1536 427 deflated
DANCAD3D.041 3328 1505 deflated
DANCAD3D.042 1536 797 deflated
DANCAD3D.043 53248 24288 deflated
DANCAD3D.047 4096 1359 deflated
DANCAD3D.048 4352 1924 deflated
DANCAD3D.049 11008 5290 deflated
DANCAD3D.050 7680 3270 deflated
DANCAD3D.051 7424 3274 deflated
DANCAD3D.052 4608 2418 deflated
DANCAD3D.053 512 400 deflated
DANCAD3D.054 6144 2757 deflated
DANCAD3D.055 7168 2937 deflated
DANCAD3D.056 6656 2688 deflated
DANCAD3D.057 18432 7032 deflated
DANCAD3D.058 2048 509 deflated
DANCAD3D.059 2048 1062 deflated
DANCAD3D.060 8448 2925 deflated
DANCAD3D.071 8448 3279 deflated
DEMO1.BAT 105 85 deflated
DEMO1.MAC 5695 2085 deflated
DEMO1.SUB 2404 1055 deflated
DEMO1A.ASC 27994 2985 deflated
DEMO1B.ASC 31348 3340 deflated
DEMO1C.ASC 17274 1933 deflated
DEMO1D.ASC 281 83 deflated
DEMO2.BAT 252 193 deflated
DEMO2.MAC 2136 910 deflated
DEMO2A.SUB 857 464 deflated
DEMO2B.SUB 1392 662 deflated
DEMO2C.SUB 4090 1105 deflated
DEMO2D.SUB 2015 984 deflated
DEMO2E.SUB 811 452 deflated
DEMO2F.SUB 961 493 deflated
DEMO2G.SUB 878 506 deflated
DEMO2H.SUB 1751 860 deflated
DEMO2I.SUB 995 517 deflated
DEMO3.BAT 143 97 deflated
DEMO3.MAC 20341 5332 deflated
DEMO3A.2D 19386 4090 deflated
DEMO3B.2D 18816 4710 deflated
DEMO4.BAT 120 100 deflated
DEMO4.MAC 3361 1530 deflated
DIMHV.MAC 4356 530 deflated
DISK3OF5.DOC 1511 767 deflated
INSTALL.BAT 3771 1024 deflated
LABEL3D3.TXT 399 255 deflated
README.BAT 2772 1231 deflated

Download File DANCAD3.ZIP Here

Contents of the README.BAT file


ECHO OFF
CLS
REM Copyright (c) 1986 - 1991 by Daniel H. Hudgins, All Rights Reserved
REM File README.BAT for use with DANCAD3D.COM v2.5H

ECHO DANCAD3D by Daniel H. Hudgins, 466 Diamond St., San Francisco, CA 94114, U.S.A.
ECHO .
ECHO To use DANCAD3D v2.5 you need this hardware:
ECHO * 512KB to 640KB DOS memory, 400KB or more of it as free memory.
ECHO * A CGA, Color Graphics Adapter video board or
ECHO * A EGA, Enhanced color Graphics Adapter video board or
ECHO * A Hercules (tm), Monochrome Graphics Card type video board.
ECHO * A Hard-Disk or RAM disk with more than 2MB of free disk space.
ECHO * DOS 2.1 or higher and a fully IBM compatible computer.
ECHO .
ECHO Make a back-up copy of these five 360KB disks or three 720KB disks.
ECHO Enter COPY A:*.* B: with the blank formatted disk in drive B:
ECHO and one of the five DANCAD3D disks in the A: drive.
ECHO .
ECHO To print the DANCAD3D.DOC information file:
ECHO Put the disk number four (4 of 5) in drive A:, then enter A:, then
ECHO PRINTDOC DANCAD3D.DOC LPT1 (For the parallel printer port.)
ECHO or
ECHO PRINTDOC DANCAD3D.DOC COM1 (Use DOS MODE to set up the serial printer port.)
ECHO .
ECHO The DANCAD3D.DOC has information to get you started using DANCAD3D.
ECHO .
ECHO .
PAUSE

CLS
ECHO To install DANCAD3D on your HARDDISK enter INSTALL A C, where C is the
ECHO letter for your harddisk and A is the letter for the floppy drive you will
ECHO be putting the DANCAD3D disks in, or INSTALL B C if you need to use floppy
ECHO drive B. You can use Harddisk D in place of C if you want to also.
ECHO .
ECHO To run one of the demos that are on the disk enter DEMO1 after you install
ECHO DANCAD3D on your harddisk. There are other example MACRO files on the set of
ECHO disks that come with the manuals. They include some that show you how to
ECHO animate a robot, some mechanical simulations, and a macro that demonstrates
ECHO DANCAD3D v2.5's ability to animate mathematical formulas.
ECHO .
ECHO Enter DANCAD3D to start the program. Press [T]utor from its main menu to
ECHO read some help screens. Press [D]raw from the main menu to draw. When you
ECHO run the program for the first time it will ask you for the video mode you want
ECHO it to use. If you do not know what type of video board you have read the
ECHO instruction book that came with your computer. Be sure and read the
ECHO disclaimer in the file DANCAD3D.DOC before you run the program.
ECHO .
ECHO .
PAUSE

CLS
TYPE DISK5OF5.DOC
PAUSE

CLS
ECHO .
ECHO Enter DEMO1 to see the demo run. To run DANCAD3D when you turn your
ECHO computer on again enter CD DC25 then enter DANCAD3D.
ECHO .



 December 9, 2017  Add comments

Leave a Reply