Dec 112017
 
DANCAD3D, CAD-CAE-CAM, Wire frame animation, and drawing program. Part 2 of 5.
File DANCAD2.ZIP from The Programmer’s Corner in
Category Printer + Display Graphics
DANCAD3D, CAD-CAE-CAM, Wire frame animation, and drawing program. Part 2 of 5.
File Name File Size Zip Size Zip Type
DANCAD3D.025 16384 1171 deflated
DANCAD3D.026 112384 42477 deflated
DANCAD3D.027 42240 17396 deflated
DANCAD3D.029 9472 3328 deflated
DANCAD3D.030 6144 2658 deflated
DANCAD3D.031 7424 2657 deflated
DANCAD3D.032 7424 3560 deflated
DANCAD3D.033 6912 3308 deflated
DANCAD3D.034 5120 2504 deflated
DANCAD3D.035 10496 4696 deflated
DANCAD3D.036 1280 702 deflated
DANCAD3D.037 1536 771 deflated
DANCAD3D.038 3328 1435 deflated
DANCAD3D.061 98816 38996 deflated
DANCAD3D.062 9472 3788 deflated
DANCAD3D.066 1024 450 deflated
DISK2OF5.DOC 1511 767 deflated
INSTALL.BAT 3771 1024 deflated
LABEL3D2.TXT 395 254 deflated
README.BAT 2772 1231 deflated

Download File DANCAD2.ZIP Here

Contents of the README.BAT file


ECHO OFF
CLS
REM Copyright (c) 1986 - 1991 by Daniel H. Hudgins, All Rights Reserved
REM File README.BAT for use with DANCAD3D.COM v2.5H

ECHO DANCAD3D by Daniel H. Hudgins, 466 Diamond St., San Francisco, CA 94114, U.S.A.
ECHO .
ECHO To use DANCAD3D v2.5 you need this hardware:
ECHO * 512KB to 640KB DOS memory, 400KB or more of it as free memory.
ECHO * A CGA, Color Graphics Adapter video board or
ECHO * A EGA, Enhanced color Graphics Adapter video board or
ECHO * A Hercules (tm), Monochrome Graphics Card type video board.
ECHO * A Hard-Disk or RAM disk with more than 2MB of free disk space.
ECHO * DOS 2.1 or higher and a fully IBM compatible computer.
ECHO .
ECHO Make a back-up copy of these five 360KB disks or three 720KB disks.
ECHO Enter COPY A:*.* B: with the blank formatted disk in drive B:
ECHO and one of the five DANCAD3D disks in the A: drive.
ECHO .
ECHO To print the DANCAD3D.DOC information file:
ECHO Put the disk number four (4 of 5) in drive A:, then enter A:, then
ECHO PRINTDOC DANCAD3D.DOC LPT1 (For the parallel printer port.)
ECHO or
ECHO PRINTDOC DANCAD3D.DOC COM1 (Use DOS MODE to set up the serial printer port.)
ECHO .
ECHO The DANCAD3D.DOC has information to get you started using DANCAD3D.
ECHO .
ECHO .
PAUSE

CLS
ECHO To install DANCAD3D on your HARDDISK enter INSTALL A C, where C is the
ECHO letter for your harddisk and A is the letter for the floppy drive you will
ECHO be putting the DANCAD3D disks in, or INSTALL B C if you need to use floppy
ECHO drive B. You can use Harddisk D in place of C if you want to also.
ECHO .
ECHO To run one of the demos that are on the disk enter DEMO1 after you install
ECHO DANCAD3D on your harddisk. There are other example MACRO files on the set of
ECHO disks that come with the manuals. They include some that show you how to
ECHO animate a robot, some mechanical simulations, and a macro that demonstrates
ECHO DANCAD3D v2.5's ability to animate mathematical formulas.
ECHO .
ECHO Enter DANCAD3D to start the program. Press [T]utor from its main menu to
ECHO read some help screens. Press [D]raw from the main menu to draw. When you
ECHO run the program for the first time it will ask you for the video mode you want
ECHO it to use. If you do not know what type of video board you have read the
ECHO instruction book that came with your computer. Be sure and read the
ECHO disclaimer in the file DANCAD3D.DOC before you run the program.
ECHO .
ECHO .
PAUSE

CLS
TYPE DISK5OF5.DOC
PAUSE

CLS
ECHO .
ECHO Enter DEMO1 to see the demo run. To run DANCAD3D when you turn your
ECHO computer on again enter CD DC25 then enter DANCAD3D.
ECHO .



 December 11, 2017  Add comments

Leave a Reply