Category : System Diagnostics for your computer
Archive   : XLOCK1.ZIP
Filename : README.DOC

xlock1-readme.doc 6/1/90

LICENSE AGREEMENT

The X-Lock 1 Product is NOT "Public Domain" and it is NOT "Freeware".
X-Lock 1 is a copyrighted software product developed and owned by X-Lock
Corporation, located in Alpharetta, Georgia, U. S. A. X-Lock Corporation,
grants you without charge the right to reproduce, distribute and use
copies of this version of our X-Lock 1 shareware software product, subject to
the limitations specified below, and on the express condition that you do not
receive any payment, commercial benefit, or other consideration for such
reproduction or distribution, or change this license agreement or the
following copyright notice which appears in the software, documentation, user
interface, menus and magnetic media: (C) Copyright 1988, 1989, 1990
X-Lock Corporation All rights reserved worldwide.

Limitations: You may make and keep one (1)back-up copy of the software for
your personal use, provided that (i) you copy all the copyright, trademark,
and other information indicated on the initial screen display (or on the
diskette label, for the registered version disk) onto your backup diskette
label, and (ii) you have registered. Also you may distribute copies to other
persons, but solely for their evaluation (i.e., to decide whether to continue
using the product and therefore register) and solely for evaluation by such
other persons during that thirty (30) day period. X-Lock 1 must NOT be sold or
otherwise provided as part of a larger system, or as a part of a more
inclusive product or service, without express written consent and licensing
from X-Lock Corporation.

The rights to receive any such financial or other benefit, and to modify the
product or employ its components in any kind of derivative work, are reserved
exclusively by X-Lock Corporation. Support from users enables us to develop
additional features and future versions of the X-Lock 1.


Registered users benefit from enhanced technical support, notice of new
products, and bulletin board access. To register, please send $25 to:

MAGEE ENTERPRISES INC.
POST OFFICE BOX 1587
NORCROSS, GEORGIA 30091 USA
(404) 446-0271

Please use the enclosed registration form and include software version #.

Xlock Corporation has a wide range of data security and privacy products,
please see the following page for additional products.



ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿
³ X-Lock Product Familiy ³
ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´
³ ³
³ Thank you for choosing X-Lock 1 as a privacy system for ³
³ your computer/s. To have a fully functional security ³
³ system you may want to install optional software/hardware. ³
³ A list of our current product line is provided below. ³
³ ³
ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´
³ ³
³ X-Lock 1 Access Control SHAREWARE privacy system ³
³ Provides access control for ³
³ 1 user ³
³ ³
³ X-Lock 10 Access Control Provides access control for ³
³ 1 system administrator and ³
³ 9 general users ³
³ ³
³ X-Lock 10 Hardware Provides increased security with³
³ hardware boot protection for ³
³ IBM PC/AT and 100% compatibles ³
³ ³
³ X-Lock 10 PS/2 Hardware Microchannel version of above ³
³ ³
³ Directory Control System Administrator can ³
³ restrict access to specific ³
³ directories to individual users ³
³ ³
³ Program Authentication Guards against computer viruses ³
³ and un-authorized use of ³
³ software ³
³ ³
³ Audit Trail Provides a permament record ³
³ of who has used the PC and ³
³ their activities ³
³ ³
³ DES Encryption Provides a means to encrypt ³
³ your data on a file by file ³
³ basis ³
³ ³
³ X-Lock 50 An NSA approved security system ³
³ for 130 users providing all of ³
³ the above features with the ³
³ added benifit of full disk DES ³
³ hardware encryption on the fly. ³
³ ... for maximum security ³
³ ³
ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ

Also, please feel free to contribute your ideas regarding desired additional
product features and functionality.


THIS PRODUCT IS LICENSED "AS IS" WITHOUT ANY WARRANTY OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE, PERFORMANCE, OR OTHERWISE; ALL WARRANTIES
ARE EXPRESSLY DISCLAIMED. BY USING THE X-LOCK 1 PRODUCT, YOU AGREE THAT
NEITHER X-LOCK CORPORATION NOR ANY OFFICERS, DIRECTORS, EMPLOYEES,
SHAREHOLDERS, AFFILIATES, OWNERS, OR OTHER RELATED PARTIES WILL BE LIABLE TO
YOU OR ANY THIRD PARTY FOR ANY USE OF (OR INABILITY TO USE) OR PERFORMANCE OF
THIS PRODUCT, OR FOR ANY DAMAGES WHATSOEVER WHETHER BASED ON CONTRACT, TORT OR
OTHERWISE. EVEN IF WE ARE NOTIFIED OF SUCH POSSIBILITY IN ADVANCE. (SOME
STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL
DAMAGES, SO THE FOREGOING LIMITATION MAY NOT APPLY TO YOU.)

You may not reverse-engineer, disassemble, modify, decompile or create
derivative works of the product. You acknowledge that the product includes
certain trade secrets and confidential information, all of which is the
copyrighted intellectual property of X-Lock Corporation. X-Lock 1 is a
registered trademark of X-Lock Corporation. All rights are reserved
worldwide. IBM, Microchannel, PS/2 and Personal System/2 are registered
trademarks of the IBM Corporation.


RESTRICTED RIGHTS LEGEND

Use, duplication or disclosure by the Government is subject to restrictions as
set forth in sub paragraph (c) (1) (ii) of the Rights in Technical Data and
Computer Software clause of DFARS 252.227-7013. X-Lock Corporation,
2001 Westside Pkwy, Suite 190, Alpharetta, Georgia 30201. (404) 475-8787

* * * * * * * * * * * * * * * * Installation * * * * * * * * * * * * * * * * *

On the X-LOCK 1 distribution diskette you should have the following files:

README.DOC - documentation (this file)
1INSTALL.EXE - install / uninstall program
PASSWORD.EXE - password change program
EMERACC.EXE - emergency access program
LOGON.SYS - security driver
SUSPEND.COM - suspend utility
SHOWME.EXE - module version utility
WHO.EXE - unauthorized logon audit utility

If you downloaded these files from a network or BBS, copy all of them to
a blank diskette. We will refer to this disk as your "INSTALL diskette".
The current version of 1install requires that the installation
be done from this diskette.

Please be sure to make a backup of this diskette.


Installation of X-Lock 1 is SIMPLE. There are three(3) steps:

1. Format a bootable system diskette for use by installation program
2. Execute the A:1INSTALL program to install programs
3. Execute the PASSWORD program to activate your password



UN-Installation of X-Lock 1 is also SIMPLE. There is one(1) step:

1. Execute the A:1INSTALL program to un-install programs



>>>> NOTE: The XLOCK-1 must be un-installed prior to changing DOS levels


* * * * * * * * * * * * * * * Installation - Step One * * * * * * * * * * *

INSTALLATION - STEP ONE


First obtain ANOTHER diskette that will fit in your bootable diskette
drive, (most of the time this is drive a:). Format this diskette with
the standard DOS command:

FORMAT X:/S

where X is the bootable drive on your PC

This bootable diskette will be used later as the "EMERGENCY ACCESS"
diskette.

Please label as EMERGENCY ACCESS and which PC it is for.

Please place it aside and re-insert the "INSTALL" diskette.


* * * * * * * * * * * * * * * Installation - Step two * * * * * * * * * * *

INSTALLATION - STEP TWO

Next get to the bootable drive prompt, for instance

A:\

Once you see the prompt above invoke the install program
like this:

1install : :

where source is your bootable diskette drive and
target is your bootable hard disk.

Once you have invoked 1install.exe a screen will appear asking you
if you want to install or un-install. Select "I" to install. A
menu will now appear with the current status (installed/un-installed)
of all available X-Lock options. You may select each option by
pressing the button that represents it. For example if you chose
to install Access Control you would press the '1' button on your
keyboard.

NOTE: Access Control MUST be installed prior to any other module.

You will then be prompted to insert the formatted system diskette
you made earlier. After 1install.exe is finished with the
"Emergency Access Diskette" you may install additional options (if
purchased) or quit the program.

You must now re-boot your computer before you can finish installing
X-LOCK 1. The install program will assist by re-booting for you.

NOTE: YOU MUST REBOOT !

The "Emergency Access" diskette created above can be used
to obtain "Emergency Access" should you ever get locked out of
your PC. Keep this disk in a safe place as it can be used to
circumvent the security system. Also, each emergency access
diskette is unique to the PC where it was created. DO NOT
USE AN EMERGENCY ACCESS DISKETTE CREATED ON ONE PC ON ANOTHER
PC. Use of the emergency access disk on the wrong PC will
destroy the PC's data, and it will not be recoverable. Each
PC must have its own unique Emergency Access Diskette. The
Emergency Access diskettes are not interchangable between PC's.

The procedures for using the Emergency Access diskette are
described below.

* * * * * * * * * * * * * * Installation - Step three * * * * * * * * * *

INSTALLATION - STEP THREE

cd xlock
password

The password program will obtain your account name and password that
you create (up to twenty characters). It is advisable to use at
least eight characters each.

X-Lock 1 is now completely installed. To make it active, the
computer must now be RE-BOOTED.

THATS IT!!



NOTE: The PASSWORD.EXE and other utility programs must be executed
out of the XLOCK subdirectory, or a "PATH=C:\XLOCK" must
be included in your AUTOEXEC.BAT file.

NOTE: The XLOCK programs require that the XLOCK subdirectory be
located off of the root directory. Do not attempt to move
the installed programs to another directory.


* * * * * * * * * * * * * * * * * UN-Install * * * * * * * * * * * * * * *

UNINSTALL - STEP ONE

First insert the "INSTALL" diskette into the bootable drive (A).

Next get to the bootable drive prompt, for instance

A:\

Once you see the prompt above Invoke the uninstall program
like this:

1install

where source is your bootable diskette drive and
target is your bootable hard disk.

Once you have invoked 1install.exe a screen will appear asking you
if you want to install or un-install. Select "U" to uninstall. A
menu will now appear with the current status (installed/un-installed)
of all available X-Lock options. You may select each option by
pressing the button that represents it. For example if you chose to
install Access Control you would press the '1' button on your
keyboard.

The uninstall program will now remove the appropriate programs and
drivers from your computer.

You must now re-boot your computer in order to completely remove
X-LOCK 1. The uninstall program will assist by re-booting for you.

NOTE: YOU MUST REBOOT !


NOTE: DO NOT attempt manually un-install any of the XLOCK files.


* * * * * * * * * * * * * * * * EMERGENCY ACCESS * * * * * * * * * * * * *

The "Emergency Access" diskette created during installation can be
used to obtain "Emergency Access" should you ever get locked out of
your PC. Keep this disk in a safe place as it can be used to
circumvent the security system.


EMERGENCY ACCESS PROCEDURES

In the unlikely event you are locked out of your PC the Emergency
Access disk can generally be used to unlock the system. If you are
unable to unlock your PC after following the Emergency Access
procedures then contact your dealer or X-Lock Corporation for
further assistance.

Each emergency access diskette is unique to the PC where it was
created. DO NOT USE AN EMERGENCY ACCESS DISKETTE CREATED ON ONE PC
ON ANOTHER PC. Each PC must have its own unique Emergency Access
Diskette.


Follow these steps CAREFULLY:

1. Locate the "EMERGENCY ACCESS" diskette and "ACCESS CONTROL"
diskettes that were created in the installation process.

2. Boot your PC from the A: drive with your Emergency
Access Diskette and obtain an A:> prompt. Then type

EMERACC xxxxxxxx

Where xxxxxxxx is the key you wrote down
during the installation process.

While running the EMERACC program you should have seen the
message

Emergency Disk Recovery Complete

3. Press any key to continue. The machine will automatically
reboot and UN-INSTALL all X-LOCK related device drivers and files.

4. When the machine is finished press "q" to quit. The machine will
once again reboot.

5. You are now ready to re-install X-LOCK 1.



NOTE: THIS "EMERGENCY ACCESS" DISKETTE IS A "FEATURE". IT DOES NOT
HAVE TO BE USED!!

IF YOU DO NOT WISH TO KEEP THE EMERGENCY ACCESS DISKETTE JUST
DESTROY IT. OUR TECHNICAL SUPPORT DEPARTMENT IS AVAILABLE TO
ASSIST THE USER SHOULD THEY GET "LOCKED OUT" OF THEIR SYSTEM.



* * * * * * * * * * * * * * * * UTILITY PROGRAMS * * * * * * * * * * * * *

The following utility programs are included to enhance your system:

1) SUSPEND.COM - suspend utility
2) SHOWME.EXE - module version utility
3) WHO.EXE - unauthorized logon audit utility

These programs are executed from the DOS command prompt.


1) SUSPEND - This program provides a means of securing a machine that
has been inactive for a pre-determined period of time.
It also provides a "hot-key" that will secure the machine
while the operator is away from the computer.

The screen will go blank, depressing any key will display
the log-on screen.

When the operator returns, a simple log-on will resume
the operator to the "suspended" program.

Both the time period and the "hot-key" are set as command
parameters.

Type SUSPEND ? for more information

Note: This program may not work with certain graphic-based
programs.


2) SHOWME - This program will display the versions of the XLOCK modules.


3) WHO - This program will display all unsuccesfull log-on attempts.
This will let you know that someone has TRIED to use your
machine!!

Note: This program will not log attempts made from the
SUSPEND log-on banner.

Note: This program uses the PC/AT clock and date information.
Several older PCs do not have real-time-clocks. The
date stamps therefore will be inaccurate in these
machines.

The illegal logon attempt will still be logged.


NOTE: These utility programs must be executed out of the XLOCK
subdirectory, or a "PATH=C:\XLOCK" must be included in your
AUTOEXEC.BAT file.

ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
³User Registration: ³YES! I want to
³ ³help support the
³ ³Free Enterprise
³Name: ___________________________________________________³system. Please
³ ³register me as a
³Address: ________________________________________________³user of the X-Lock
³ ³family. This
³Telephone: _____________________ ³registration
³ ³entitles me to
³Product: _______________________ ³warranty, manuals,
³ ³update information
³Serial Number: ________________ ³and support.
³ ³
³Received From: __________________________________________³$25 REGISTRATION FEE
³ ³ $8 X-LOCK T-SHIRT
³IMPORTANT ! Resale or Export of this equipment from USA ³
³may be subject to control by the U.S. Department of State³METHOD OF PAYMENT
³ ³ MC VISA ³
³YES! I am enclosing an additional $8.00 for an X-LOCK ³
³T-SHIRT (The latest in Security Fashion) ³ __________________
³ ³
³Make Payment to: ³ __________________
³ MAGEE ENTERPRISES INC. ³ SIGNATURE/EXP DATE
³ POST OFFICE BOX 1587 ³
³ NORCROSS, GEORGIA 30091 USA ³ CHECK ENCLOSED
³ ³
³ ³
ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
end