Category : System Diagnostics for your computer
Archive   : CONF715E.ZIP
Filename : CONFIG.INI
# Lines beginning with # are comments only
# Possible switches Schalter: 1/0, ON/OFF, YES/NO
# Identify installed memory size and speed of graphics adapter?
# NB! For this test graphics modi are switched. If CONFIG is running under
# WINDOWS in a window, you must disable this test.
VideoTest=no
# Skip test to identify the chip-set on the graphics adapter?
SkipVGATest=no
# Write direct to screen?
DirectScreenWrites=yes
# Wait for flyback with CGA cards? (slows video output, but possibly
# avoids flicker/snow with older adapters)
SnowCheck=no
# Always use BIOS routines?(switch on if problems arise with less
# compatible computers)
UseBIOS=no
# Test access times for the hard disk(s)?
AccessTest=yes
# Always force the data transfer speed test for hard disks, even if an
# active cache is detected?
ForceHDspeed=yes
# Skip the test for an active cache?
SkipHDCacheTest=no
# Initialise the modem before testing? (some modems may otherwise not
# be recognised)
InitModem=no
# Try to identify main board chip set via hardwaretest. This causes some
# computers to crash, and can be disabled.
TestBoard=no
# Enter boardchipset manually, if detection should fail.
# These numbers are vaild:
# 0:Autodetect 1:UMC 2:SIS 3:CONTAC 4:ELITE
# 5:FOREX 6:OPTI 7:ETEQ 8:SYMPHONY 9:SHASTA
Chipsatz=0
# Test the access speed for Extended Memory? (Can be switched off if
# this test leads to crashes (because of privilege violations etc.)
TestExtMem=yes
# Skip testing of the short interval timer? The test doesn't work on some
# 486-66 MHz boards, so it can be disabled here:
SkipTimerTest=yes
# Try to get information about IDE hard disks? Can cause problems
# with certain MFM/RLL contollers (eg OMTI 8250).
# For registered users only!
ATbusInfo=yes
# Look for sound cards?
SearchForSoundCards=yes
# Look for resident CRT (screen output) accelerator programs?
SearchScreenSpeeder=yes
# Look for programs loaded in Hi-Dos?
HiDosSearch=yes
# In case the RAM disk was not detected, its allocated drive letter
# (letter only) can be specified here.
RamDisk=
# A particular drive can be specified here for the DOS read/write
# benchmark test. If 0 specified, the test is skipped. If left blank,
# the current drive at the time of test will be tested.
DosDisk=c
# Run CONFIG as continuous demo (only available in the commercial
# version with a special key).
DemoMode=no
# How many seconds should the demo run for?
DemoZeit=180
# How many seconds should each window be displayed?
DemoDelay=8
# Automatic logging during the test?
# (only in the commercial version with special key)
AutoLog=no
## What should be logged/ which windows should be displayed in the demo?
## Choose only from menu choices H,W,S,M,B,G:C,Q,T,V,X
Protokoll=hwsmtxv
# Load and show own comparison list (CONFIG.VGL)?
ShowVGL=no
# Enable program end with ESC key?
EndeBeiESC=no
# Window colors for monochrome display:
MBODYCOLOR=112
MFRAMECOLOR=112
MHEADERCOLOR=112
# Window colors for color display:
CBODYCOLOR=30
CFRAMECOLOR=27
CHEADERCOLOR=112
# Background color:
BACKGROUND=7
Very nice! Thank you for this wonderful archive. I wonder why I found it only now. Long live the BBS file archives!
This is so awesome! 😀 I’d be cool if you could download an entire archive of this at once, though.
But one thing that puzzles me is the “mtswslnkmcjklsdlsbdmMICROSOFT” string. There is an article about it here. It is definitely worth a read: http://www.os2museum.com/wp/mtswslnk/