Dec 292017
 
Make letterheads in AmiPro 3.0.

Full Description of File


LETTERHEAD PRO FOR AMI PRO FOR WINDOWS will
show you how you may insert custom designed
letterheads into any new AMIPRO document.
You may design your own letterhead, use your
present printed letterhead, or have CPI
Software design one for you. Includes sample
PCX graphic letterheads with Worksheets and
Order Form. You will receive your custom
designed letterhead complete with macro.
Also does logos and watermarks. Cost: $29.95


File PROAP1.ZIP from The Programmer’s Corner in
Category DeskTop Publishing
Make letterheads in AmiPro 3.0.
File Name File Size Zip Size Zip Type
BROWSE.COM 1088 943 deflated
DOCS.EXE 44623 44177 deflated
FILE_ID.DIZ 449 278 deflated
GRAPHICS.EXE 198467 197607 deflated
INSTALL.EXE 9584 9234 deflated
MACROS.EXE 30307 28860 deflated
README.TXT 9894 3439 deflated

Download File PROAP1.ZIP Here

Contents of the README.TXT file


LETTERHEAD PRO FOR AMI PRO FOR WINDOWS will
show you how you may insert custom designed
letterheads into any new AMIPRO document.
You may design your own letterhead, use your
present printed letterhead, or have CPI
Software design one for you. Includes sample
PCX graphic letterheads with Worksheets and
Order Form. You will receive your custom
designed letterhead complete with macro.
Also does logos and watermarks. Cost: $29.95
------------------------------------------------------------------------------
README.TXT: LETTERHEAD.PRO FOR AMI PRO FOR WINDOWS - BBS INSTALLATION
------------------------------------------------------------------------------

Thank for your interest in Letterhead Pro. This program will install 16
graphic sample letterheads, 6 logos, and 1 watermark into Ami Pro for
Windows. Each letterhead will also have a macro that installs the letterhead
into any Ami Pro document. Of course, you must have Ami Pro for Windows
installed prior to the installation of Letterhead Pro.

The installation program is in two stages, DOS and Windows. The INSTALL
program MUST be started from DOS. You may install it from any directory or
drive in your computer, as long as you are not installing it to the directory
where it is currently located. All the files in PROAP1 must be together in
the same directory when you start the INSTALL program. Do NOT call up Windows
and execute the RUN command. After completing the necessary DOS portion of the
installation, Ami Pro for Windows will be called up automatically, with the
instruction document LETPRO.SAM on screen.

LETPRO.SAM contains instructions on how to use Letterhead Pro. You will be
shown how to order your own customized letterhead, logo, and watermark. It is
a Ami Pro document and must be viewed and printed from inside Ami Pro.

You should print LETPRO.SAM so you may use it as a guide when displaying and
printing the Letterhead Pro letterhead examples. All instructions, worksheets,
and order forms are in LETPRO.SAM. If you only want to copy your current
letterhead into a graphic image for Ami Pro, it is necessary to read and print
LETPRO.SAM. Please place your order using the Order Form on page 8 of
LETPRO.SAM. This contains information that is necessary to fill your order. If
the Order Form is not used, we may have to return your order and request more
information. This could result in a delay of several weeks before we are able
to finally ship your completed order.

You may design your own letterhead, convert your present printed letterhead,
or have CPI Software design a letterhead for you. CPI Software will place this
design into a graphic PCX format, add a macro, and return it to you. The price
for each letterhead, logo, or watermark is only $29.95 plus shipping.

If the printer you are currently using will print Ami Pro graphics, it
will print graphical PCX letterheads. This includes laserjets, ink jets, and
dot-matrix printers. You do NOT need special printer drivers or any add-ons to
place a customized professionally created letterhead on all your Ami Pro
documents. Ami Pro for Windows and Letterhead Pro are all you need.

Before starting the installation, refresh yourself on whether you used the
Complete or Custom installation when installing Ami Pro for Windows. If
you do not remember, then locate the path to the macro files (files ending
with .SMM), graphic or drawing files (files ending with .SDW), and Ami Pro
document files (files ending with .SAM). Use the Custom installation for
Letterhead Pro and type in the path data when prompted.

INSTALLATION

Letterhead Pro may be installed in one of three ways. It may also be removed
from your hard disk (uninstalled) when you are finished, using the CLEANUP
command below. The install will install from "Anywhere to Anywhere." This
means that you may run the installation from where you downloaded this program
from a BBS. This includes any hard drive or floppy diskette in your computer.
The only restriction is one set by DOS: you cannot copy the files to the same
directory where the Letterhead Pro files are currently located.

1. Standard Installation:

The installation corresponds to the Ami Pro for Windows COMPLETE installation.
This installation program placed the macros into the \AMIPRO\MACROS directory,
and the graphics in the \AMIPRO\GRAPHICS directory. The document files are in
the \AMIPRO\DOCS directory. If you did not make any changes in the directory
locations since installing Ami Pro with the COMPLETE installation, then this
is the method of choice.

2. Custom Installation:

This installation will let you place the document file, the macros, and the
graphics into any directory you wish. You must know the path to each of these
directories. For example, if you placed all documents into a directory named
"LETTERS" off the main "AMIPRO" directory on drive "C", then this would be the
full path:

C:\AMIPRO\LETTERS

You will be asked: a. the drive letter, b. the path for document files (files
ending with .SAM), c. the path for macro files (files ending with .SMM), and
d. the path for graphic files (files ending with .SDW). If you are not sure
how you had installed Ami Pro, then use this method. Locate these files before
the installation, and write down their proper path. Even if you originally
used the COMPLETE Ami Pro installation, this method will work as long as you
know where the Ami Pro files are located.

You must be very careful that you type in the path correctly. The CUSTOM
installation will take your absolute word for the locations of these files.
If you make an error, you may have to wait until Ami Pro comes up, EXIT from
Windows, and try again. If the files are deposited in the wrong directory,
simply run the CLEANUP.EXE utility to remove them.

3. Manual Installation:

This method does not use the Letterhead Pro INSTALL program, but it must be
done exactly as follows:

a. Locate where the Ami Pro document files, macro files, and graphic
files are on your hard disk.

b. Copy these files into the proper directory:

1. DOCS.EXE into the documents directory.
2. MACROS.EXE into the macros directory.
3. GRAPHICS.EXE into the graphics directory.

c. DOCS.EXE, MACROS.EXE, and GRAPHICS.EXE, are self-extracting files. You need
only to type their names and strike the ENTER key, and the Letterhead Pro
file(s) will be extracted from them.

d. A utility by the name of CLEANUP.EXE will be placed into each directory
with the Letterhead Pro files. When you are through using Letterhead Pro,
run CLEANUP.EXE to seek out and remove every file that was installed.

e. After extracting all files from DOCS.EXE, MACROS.EXE,and GRAPHICS.EXE, call
up Windows and click on the Ami Pro icon. After Ami Pro comes up, open the
LETPRO.SAM file. Read and print the LETPRO.SAM file as instructed.

UNINSTALLING LETTERHEAD PRO

The installation places the file CLEANUP.EXE into every directory where
Letterhead Pro files have been placed. When you wish to remove all installed
Letterhead Pro files, do the following:

a. From Windows, go to the Program Manager and click on FILE. Then click on
the RUN command. On the RUN menu, click on BROWSE. Double click on the drive
letter (ie., C:\). Find the Ami Pro directory and double click the mouse.
Double click on each subdirectory. When you see the CLEANUP.EXE file, click
on it. Select OK to return to the RUN menu, and click on OK. Follow the
instructions in CLEANUP. The CLEANUP utility will remove all files in that
directory, as well as itself. You may have files in up to 3 directories that
will have to be removed with CLEANUP.EXE.

b. From DOS, go into the directories where you have installed files and find
the CLEANUP.EXE file. At the DOS prompt, type:

CLEANUP and strike the ENTER key

You will be asked if you want to uninstall all Letterhead Pro files in that
directory. Select 1. to remove all files. This will seek out every installed
file and remove it, including CLEANUP.EXE. You may find CLEANUP.EXE in up to
3 different directories. Wherever if is found, Letterhead Pro files are
present and should be removed.

CPI Software also distributes Letterhead Pro for WordPerfect for DOS, Letter-
head Pro for WordPerfect for Windows, Letterhead Pro for Word for Windows,
Letterhead Pro for WordStar for DOS, and Letterhead Pro for WordStar for
Windows. In addition, Laser Letterhead plus and The Laser Letterhead Kit are
available specifically for laser printers. All letterheads, logos, and
watermarks are created by our design department, and you may be assured of
top quality work. We have been designing letterheads for business and personal
use since 1987.

Thank you again, and enjoy your experience with Laser Letterhead Pro.

CPI Software
Post Office Box 47097
Saint Petersburg
Florida 33743-7097

Technical Assistance
Voice/Message/Fax
813-544-0212


Member of the
Association of Shareware
Authors and Distributors

Letterhead Pro for Ami Pro has been produced by a member of the Association
of Shareware Authors and Distributors, and as such, has met their demands for
professional programming. Any problems of a shareware nature that cannot be
resolved by CPI Software, may be brought to the attention of the ASAD Ombuds-
man for possible correction. Please send all information, including the name
and address of the person or company you received Letterhead Pro for Ami Pro
from, to: ASAD, ATTN: Ombudsman, 2425 North Limestone Street, Springfield,
Ohio 45503-1109.


 December 29, 2017  Add comments

Leave a Reply