Dec 272017
 
MS Windows 3 Application Shell for AUTOSIG, V 1.4. AUTOSIG is required.
File WINATO14.ZIP from The Programmer’s Corner in
Category Communications
MS Windows 3 Application Shell for AUTOSIG, V 1.4. AUTOSIG is required.
File Name File Size Zip Size Zip Type
ATO_F.PIF 545 138 deflated
ATO_W.PIF 545 137 deflated
CHKLIST.CPS 54 47 deflated
ORDER.TXT 1686 706 deflated
README.TXT 3563 1644 deflated
SAMPLE.INI 664 382 deflated
WINATO.EXE 160144 70704 deflated
WINATO.HLP 158184 40344 deflated
WINATO.WRI 15232 5541 deflated

Download File WINATO14.ZIP Here

Contents of the README.TXT file


README file for WinAto Version 1.4 2/26/92


Thank you for trying WinAto. This is a maintenance and enhancment update of WinAto Version 1.3. You may copy this release on top of a previous release if WinAto is in it's own directory. If WinAto is in the windows or autosig directory, copy only the winato.exe and winato.hlp file to that directory.

Installation instructions are in the WINATO.WRI file as is the list of changes incorporated in this update. That file may be viewed or printed using the MS Write program included with Windows 3.0 or with Word for Windows using the conversion from Write format. Please address any questions you have about WinAto to Ray Saunders 72740,764 in section 1, Autosig, of the IBMCOM forum, or, if private, by Compuserve Mail.

Registration information and fee information is contained in the WINATO.WRI document. There is also an ORDER.TXT file which may be used to register the program.

If you experience difficulty when you attempt to go on-line with ATO, it is probably because the General setup parameters and/or the pifs associated with the execution of ATO are not correct. The simplest way to make it work is to follow these steps:

1. Place the WinAto files in a winato directory on any drive.

2. Copy the pif files, ato_f.pif and ato_w.pif, to the autosig/ato directory.

3. Execute WinAto. A message will display indicating that the General Setup must be executed. Select OK.

4. The General Setup dialog box will display. Enter the directory path to your autosig directory, i.e, C:\ATO. DO NOT INCLUDE THE EXE FILE NAME. Then select OK.

5. The WinAto main window will display. Execute help and read the procedure sections for setting up WinAto and complete any required setup.

WinAto is not free software. It is offered, as shareware, to give you the opportunity to try the program for 21 days before you are obliged to register it. During the 21 day period, WinAto will not constantly harass you with nag, restricting it's comments to only a reminder, on exit, of the number of days remaining in the trial period. After that time the reminders will increase proportional to the time of use. The use of WinAto and ATO will certainly save you many dollars over the conventional on-line use of CompuServe, including the use of CIM. I hope you will share some of that saved revenue by registering WinAto to enable my continued support of the program. If you continue to use the program, disregarding the nag and the fact that use of the program after 21 days without registering is in violation of copyright laws, I hope that you will at least pass the release file along and tell others how outstanding it is. If, for some reason, like vacation, business trip, or otherwise, you need more time to evaluate WinAto, please contact me by CIS mail, and I would be very happy to give you a temporary registration to extend the 21 day trial period.

Please feel free to send me your comments and suggestions. I will always attempt to support my users in the manner which I would want them to support the program and me.

Thanks again for trying WinAto and for your support,

Ray Saunders


Last minute release notes:

There have been some instances where the autopasses have hung up when they are run in a window. Changing the priorities in the ato_w.pif to increase the size of the timeslice given to ATO seems to alleviate that problem. It is also better to keep the "Detect Idle Time" option turned off.

As of this time, there are no known bugs.


 December 27, 2017  Add comments

Leave a Reply